Such an awesome setup sir! I’m totally digging the blue banshee. Kudos for keeping it looking new!

@350iroc9

Жыл бұрын

Hey thanks man I appreciate that! I do love my Banshee! Nothing can replace that one! Braaaap!

This is a great video, thanks for sharing. I have been trying to learn more about the AIS delete and Breather Box add. This helped shed some light on process. Thanks!

@350iroc9

3 жыл бұрын

Very cool and thank you! I found myself in the same situation looking for some incite to the subject prompting the video. I'm new to this type of platform as I've been riding my Banshee for the past 25 years. I know the frustration when researching the forums as everyone just assumes you know what they are talking about. Even the manufactures of many of the aftermarket products do a poor job of explaining (if any explaining) or use outdated directions that don't exactly depict the installation process for a specific machine. A good example is the fuel customs intake that finally showed up. To my surprise they included an AIS block-off plate in the box and could of saved me the $20.00 plus freight! Again thank you for the comment I really appreciate it. My new exhaust should be here this weekend and will be making a follow up video showing everything working together!

Love the 38 motorsports products! I run there breather/seat pins/tank lowering kit/speed sensor block off!

@JoseGarcia_23

2 жыл бұрын

What does the speed sensor block off help with?

@ononewheel7

2 жыл бұрын

@@JoseGarcia_23 it just removes the sensor and provides a block off plate for it.

I appreciate the response. my quad is stock and I'm thinking of doing the big 3

@350iroc9

3 жыл бұрын

All I can say is night and day!

i bought the 38 motorsport ais block off but then read i could use the 2013 yfz bracket in place of the AIS block off plate and give the metal line bracket place to bolt to.

Your video is the best video I have found on KZread I order the FCI , I was very lost on what to do with the ais , I’m going to order this parts and install the 38 motors sports one question did you use the hoses the come on the kit? I just install the new ROSSIER ENGINEERING R5 exhaust I will send the ecu to PEP after I have the big 3 install so they can program Tune it to the correct settings. I hope you can help me out on how to install the new air breather

@350iroc9

2 жыл бұрын

Hi Erick and thank you for the comment. Yes you will need to use the hoses that are supplied in the 38 motor sports breather box kit because they are cut to the correct length. There are only 3 of them and is very easy to install. It also sounds like you are going to purchase their AIS block-off plate as this is needed to complete the install. Next let's talk about the FCI intake. The performance gains are great but I have to admit its not easy to install. I've had mine off and on three times now and the last time I decided to just do it right. In my opinion the way to do it right is to remove the rear shock so you can actually get your eyes and hands in there to do the work. The space otherwise is so tight and cluttered that insuring a proper seal to the throttle body is nerve racking. The FCI is not an engineering masterpiece and is a pain to get the filter on and off. Because the filter is so large and the way it clamps on (with the air/box version) keep the box loose (without the mounting bolts installed) and install the filter first. Then bolt down the box as your last step. Most importantly just take your time. A proper seal without air leaks is imperative to the life of your motor. Thanks again for watch I really appreciate it and best wishes.

yes she is, Banshee baby

Nice bike man I was wondering for the cable bracket that goes on top of the AIS block off plate did you use the stock screws or did you buy longer ones?

@350iroc9

3 жыл бұрын

Thank you for the comment. I was able to use the stock screws no problem.

@350iroc9

3 жыл бұрын

As I look at the original bracket it appears you can still reuse it except the fact that it still has a welded tube connected to it. Half of the intent is to clean up the engine with the minimum amount of EPA pluming possible. Again thank you for the comments.

@goldenboygq9

3 жыл бұрын

@@350iroc9 tha ks for the info, do a follow up video after all the goodies its going to be a BEAST!

hey man thank you for the videos. I just got my 2020 yfz450r se and have rode it a few times before stumbling over these videos. If I do the AIS block-off and breather box before the big 3 will I be fine to run the quad? thanks man!

@350iroc9

3 жыл бұрын

SCF thank you for the comment/question! Now to answer your question "yes" you will be fine as those two upgrades have nothing to do with the ECU in anyway. Yamaha directly sells their GYTR AIS delete system from their website (block-off plate) and the only stipulation they mention is that it should only be installed for a competition closed course application only (Race Track). They say that because you are deleting the emissions plumbing that was enforced by the EPA. As for the breather box your really just deleting the OEM one connected to the side of the stock air box and relocating it with a replacement unit like I did from 38 motorsports. Hope this helps. Send a video link to your machine as we would love to see it!

@scfproductions6171

3 жыл бұрын

@@350iroc9 thanks for the reply! im ordering my big 3 and delete kit in the next few days super stoked

@350iroc9

3 жыл бұрын

@@scfproductions6171 Congratulations you are going to LOVE the extra POWER!!!!!

@scfproductions6171

3 жыл бұрын

@@350iroc9 i bet, i took the quad to the sand with the stock bog and it was driving me crazy! Can't wait to see your glamis footage!

@350iroc9

3 жыл бұрын

@@scfproductions6171 I myself never got the opportunity to witness the stock bog while riding the quad only in the heat cycling. I purchased the Vortex right out of the gate so I didn't have to. I'm still working on the footage currently. I had ordered a GoPro Hero 9 but it didn't make it in time for the trip. With that said I had to use my old Hero 2 camera. I've made several videos in the past but I swear 4 stroke machines sound like they are going slow compared to 2 strokes. Even though I was faster then any of the Banshees I was with it's not translating well on video. I'm still working on it though and want to publish the best footage possible. On a side note driving around Glamis really loosened a bunch of bolts in various places. If you haven't already go back through everything and make sure everything is tight and right!

I have the same 2020 same color... ordered 38 motorsport box, ais delete vortex came with FMF 4.1 with power bomb header, (package at racing powersports $1184.00 no tax no shipping cost) that was the best I found for a full exhaust and a vortex. I also just ordered the skid from peaksracing, he also has a little plug to fix the hole in the air box when you remove the stock breather box ... some don't care, but I go through water some times and don't want that hole there. I should have most the stuff this weekend. What did you settle on for mapping? I was going to start with map 7 same as 9 but does not increase rev limit ....

@350iroc9

3 жыл бұрын

Wow you are certainly on your way! You don't plan to do the Fuel Custom's intake? I wish I could attach a picture of the stock intake vs the Fuel Custom's side by side. You would be able to see the difference in the amount of air flow possible between the two. On the Vortex I'm currently sitting at Map 7 settings 7,7,7. I'll m going to Glamis next month and will have more of an opportunity to try the other mapping. Thank you for the comments and best wishes to you!

@hfcxf426

3 жыл бұрын

I got a pro tech lid, forgot to mention that, I am about 5 hours from Glamis might have to hit me up when you go out there

@350iroc9

3 жыл бұрын

@@hfcxf426 I will be there February 26th at wash 10. Look for the Semi Truck and you found us! Hope you can make it out!

Can you make a list of all these parts I just picked up a 2020 yfz450r in august

@350iroc9

3 жыл бұрын

Hi Raymond. Here is a list of all the parts so far that you requested: 38 MotorSports Oil Breather box and AIS block-off plate, Yamaha OEM Part 18P-11395-00-00 (Hanger shown in video), Voxtex x10 ECU, Fuel Customs intake with Air-box, Rossier Rebel R4 Full Competition Exhaust system, Hiper Tech 3 Beadlock Rims w/ ITP HD Holeshot tires, Hour Meter, Peak Racing Full Belly Skid Plate.

what maps you running with the vortext i have same thing as you fuel customs intake and the same brether box but i have exhaust

@350iroc9

3 жыл бұрын

Hi there. I'm currently sitting on Map 5, Low 7, Mid 7, Hi 6. FYI I'm heading for Glamis CA in a week. I'm going to mess with the settings over a 10 day period and will reply back with what worked best.

I used the 2013 holder without a block off plate underneath .... wonder if I fudged up? Seems to work fine though 🤷🏻‍♂️

@350iroc9

3 жыл бұрын

I think the only way to know if you are okay is to spray some soapy water around the holder to make sure no air is leaking. (Like your checking for a tire leak.) No bubbles then no worries. Thanks for the comment!

@AbundancePlus

3 жыл бұрын

@@350iroc9 if you don’t mind what lock and cable are you using on your 2020 yfz. Thanx in advance...

@350iroc9

3 жыл бұрын

@@AbundancePlus Ha! I'm impressed! You really pay attention to detail! So that is a very old setup made by Brinks. I've probably had it since the late 80's. Super thick yet super flexible. Always remember that thieves are opportunistic in nature. The more difficult you make it the less likely they are willing to attempt to take it. Can you imagine trying to lift this thing into a truck with a 100lb jack dangling from it? I've also incorporated other means as a backup that would provide me with an opportunity to meet the poor fool and introduce my AK LMAO! I've had many a friend loose their ride to scum so let it be a lesson to all and lock it up! Great question again and thank you for the comment!

@AbundancePlus

3 жыл бұрын

@@350iroc9 no problem and thanx again... I have a short clip on my channel of my Trx450r. Sport quads is a way of life!

@350iroc9

3 жыл бұрын

@@AbundancePlus O yes your TRX is absolutely a gem! The DASA sounds tight! The black and white is sweet especially with that seat cover you installed. Very cool thanks for sharing! I wish Honda would get back into the game already. What could they possibly be waiting for?

Where did you get that lift from??

@350iroc9

Жыл бұрын

That is a Craftsman Motorcycle/ATV Jack. If you are interested in one do not buy the Harbor Freight version as its no good. If you want to get your bike even higher off the ground you can use a couple of cut 4x4 blocks of wood in between your skid plate and the top of the jack platform. Thanks for watching! www.searshometownstores.com/product/Craftsman-34612-MotorcycleATV-Jack

Did that exhaust not came in?

@350iroc9

3 жыл бұрын

It finally showed up today!!! I thought it was lost for sure. Now I just need to do the install and film the video. I will definitely have a followup video uploaded by this weekend. I'm so excited!!!!

Waiting on the rossier exhaust video 😎

@350iroc9

3 жыл бұрын

Yes it should be here tomorrow but it's with the Post Office so I'm hoping it will actually make it on time. I plan to film the first startup and will upload it right afterwards. Thanks as always for the comments!

@BOOTSY24100

3 жыл бұрын

@@350iroc9 check out my rossier exhaust 💪🏾💪🏾

@goldenboygq9

3 жыл бұрын

I just got mine installed check out the video if you have time dude!

@BOOTSY24100

3 жыл бұрын

Both sounds really good

@350iroc9

3 жыл бұрын

@@goldenboygq9 Alright I did check out your video and thank you! Both of your machines are absolutely beautiful. They look great and sound great! I really appreciate you sharing my man! Stay cool!!!!

Is that a rossier header?

@350iroc9

3 жыл бұрын

The Rossier header can be seen on my second video located here:. kzread.info/dash/bejne/aXp2usyFY5yxprQ.html

@kevinsims7867

3 жыл бұрын

I commented on the wrong video. Clean quad man. I'm thinking about getting the rossier setup for my yfz

@350iroc9

3 жыл бұрын

@@kevinsims7867 The Rossier is an awesome choice. As long as you don't require a spark arrestor you can't go wrong. Super high quality. Very impressed with it. Thanks for the comments I appreciate it.

I want my 9:08 back of my life