BIG 3 means - Intake , exhaust and a fuel management system upgrade. These 3 things alone will unlock your quads true potential as the factory intended. Because of EPA restrictions these quads are sent out in kitten mode but can be turned into a lion with the BIG 3!
@blac_migo820613 күн бұрын
@@350iroc9 I’m going to do these upgrades before I build the motor thanks a lot
@JP-ec9rl14 күн бұрын
Wayne National Forest?
@350iroc913 күн бұрын
Yes Wayne National Forest!
@ryankennedy735920 күн бұрын
Ru running stock tires ?
@350iroc920 күн бұрын
Yes I have the stock ITP Holeshot tires still on there. They are really good in the mud and super good on the street.
@crsnash12124 күн бұрын
The roads in Nashville are worse than that! 😂
@350iroc924 күн бұрын
LOL I'm sure! Where did all that infrastructure money go? I actually just got back from this same ride location and currently it's a mess. When this video was filmed it was the best it's ever been there. They claim there is no funding to fix the trails this year. Thanks for watching!
@johnfuller2291Ай бұрын
What trail system is this
@350iroc9Ай бұрын
This is the Pocahontas Trail System. Here is a link to it: trailsheaven.com/plan-your-trip/choose-a-trail/pocahontas/
@corywilliams4659Ай бұрын
Just finished rebuilding the entire rear end of mine today and finally got to take a rip after 6 months down 😊
@350iroc9Ай бұрын
So how did she run?
@CmoneyOmertaАй бұрын
What’s your top speed with your mods
@350iroc9Ай бұрын
I was able to get to 76 MPH and ran out of room.
@coleerbacher7145Ай бұрын
Oh man I've been waiting for this footage!!
@ghammababy3992Ай бұрын
My question is which is better the banshee or the 450 i am stuck between the 2 don’t really know which one to buy honestly my heart says banshee but i like the way the 450 looks could you help me out asap lol im going next weekend to purchase a banshee want to make sure its the right move i heard banshees break a lot and heard the 450 really don’t break at all
@ghammababy3992Ай бұрын
And also how does it handle in glamis? Especially me being a big dude im heavy set you think the banshee could pull me around or should i go with the 450
@350iroc9Ай бұрын
If you are heavy set then 450 all day is the best option. The Banshee in Glamis really has to work with a big fella piloting it. They will boil easily with aggressive sand paddles. The 450 is so much easier to ride in the dunes and gets twice the gas mileage. I've had zero issues in my 65 hours of operation with the 450. In fact the only reason I have it is because I burned up my Banshee's electrical system in Glamis because it got too hot. If you have never owned a Banshee before then just skip it honestly. They are way too expensive now. Spend your time riding and not working on it all the time is my recommendation. You won't be disappointed with a 450. I also think the 450 is a better quad than the Raptor if you were considering it.
@zombicidalmattАй бұрын
That was mesmerizing to watch and I would have loved it, excellent riding
@350iroc9Ай бұрын
Thank you Mr. Roberts!
@leemckay9503Ай бұрын
It is relaxing and smooth
@johnberry8180Ай бұрын
It’s a great woods machine, If you know how to ride it.
@frankrizzo8799Ай бұрын
Wishing I would of bought one 5-6 years ago when I was seeing them anywhere from 3k -5k, now something used and ridable is 10k+
@350iroc9Ай бұрын
I remember a time you couldn't give them away! These quads were about 6K new 30 Years ago.
@bradmossman35372 ай бұрын
Still THE KING 👑
@macpac38032 ай бұрын
Whats all done to it as far as in thus video?
@350iroc92 ай бұрын
Ported Heads 60 over pistons Phat Head with 19mm domes 28mm PWK Flat slides running 160 main and 55 pilot FMF Fatty Pipes Elka Stage 3 all around with Elka Link system +1 +2 Alba A-Arms Lone Star +0 swing arm Dominator axle YFZ450 Front brake conversion South Texas nose mount harness that relocates the CDI, rectifier and coolant bottle to the nose. That I think is all the main components. Tons of incidentals not worth mentioning. Thanks for watching!
@danieldemayo62093 ай бұрын
Can’t believe how smooth she runs. Sounds like it be happy putting around all day.
@350iroc93 ай бұрын
Yes thank you! Here is another from the other side! kzread.info/dash/bejne/qmlntJODj5fKqqQ.html
@mikem96203 ай бұрын
Sr., What year is your banshee? Mine is 06... Will those 07 yfz calipers be compatible with my 06 banshee ? Thanks in advance.
@350iroc93 ай бұрын
I have a 95. You can use the 07 YFZ calipers no problem. Make sure to also use the 07 master cylinder because it has more fluid volume. Additionally you can use your current Banshee brake lines since the banjo bolt is the same. This is a GOOD upgrade and wish I would of done it earlier! The front tires will lock up now if I want!
@souptheamazing4 ай бұрын
Man, this takes me back when I used to go on trails with my dad. Edit: No, he's not dead, we just don't do it anymore I dont know why.
@350iroc94 ай бұрын
Well there is only one way to find out - ask him..Push him a bit and afterwards he will thank you! Thanks for watching and hope you can get back out there!
@NicholasEllis-pe2lk5 ай бұрын
Best ever made
@350iroc95 ай бұрын
YES! Thank you for watching!
@350iroc95 ай бұрын
Greetings from the USA. If you ever visit here you can ride the Yamaha Banshee to experience it yourself!
@witosarlaw5 ай бұрын
mantap bang
@350iroc95 ай бұрын
Mantap is an Indonesian word which means “Excellent.” Thank You!
@witosarlaw5 ай бұрын
salam dari indonesia bang @@350iroc9
@adrenalinayaventura21885 ай бұрын
Hey buddy I just got the same bike but it is the base model and I want to get fox shock. Where did you get yours????
@350iroc95 ай бұрын
Hi there! I purchased mine from Rocky Mountain ATV/MC. To start I decided to only purchase the fronts to make sure they fit. As you already know there is limited information/options on this subject. Don't bother contacting Elka as they don't produce anything for our year. The fronts I purchased are from the 2023 XXC 1000R parts list. They are called FOX 1.5 PODIUM RC2. The shock bodies are sold separately from the springs. In my case and because I wasn't sure I also purchased the springs to be safe. In hind sight I didn't need to as they are the same springs used on the stock FOX shocks as a FYI. Here is a link to the OEM parts finder: www.rockymountainatvmc.com/oem-schematic/10 Drill down to Can-AM > ATV> 2023> ATV-North America-Renegade-Series> Renegade 1000R EFI - XXC - North America The Can-AM part number is 706203208 for the fronts and 706004492 for the rears.
@Trail_Blaster5 ай бұрын
im getting mine next week. does it wheelie easier now with all the parts on it ?
@350iroc95 ай бұрын
Hi there and thank you for the question. The ride park I was testing at is mainly sand so the tires would only spin. Honestly this was only the third ride for me on this machine. During the initial break in weekend it was raining and mud for miles so again limited traction. Right out of the gate I ordered the HMF exhaust system with the Power Vision 3 tuner. Both of these upgrades helped but I still needed more. The QSC REV-X primary clutch is a bit spendy at $1200 but quickly became the flagship upgrade. Now the power spools up like "right now"! My riding background is with sport quads and are my primary machines in select areas. The CVT 4x4 platform is new to me still. My reasoning/vision for purchasing this machine is to branch out and explore more riding areas that I wouldn't consider before. Sport Quads are no fun in heavy mud and water because you simply can't keep your goggles clean to see. If you can't see then spin the wheel of pain. Endless large rock trails will not only destroy a Sport Quad but will also knock the fillings out of your teeth. Already with the small amount of time I've had to enjoy the Renegade I've gone further longer than my other machines. This suggests that my plan is working but its like living in two very different worlds. 800lbs is not 400lbs and you know it on these. Lastly congratulations on your purchase! There's nothing like bringing home something new that you can get into and make it your own. Keep in touch because if you reside in the US I'm sure you've noticed the 650 Renegade is a bit of a Unicorn.
@Trail_Blaster5 ай бұрын
@@350iroc9 well thanks for the reply. Yeah it's hard to find any reviews or people that have them. I've only seen one in my area. It seemed fast and sounded amazing your bike seems to rip as well I really like the Renegade much like u i like the sport look. I guess I'll find out next week. If it doesn't snow before then. Cheers!!
@350iroc95 ай бұрын
I took a look at your channel and it appears your dirt bike rider! I also ran dirt bikes in my earlier days retiring on a 1989 CR250. So for you (i'm assuming here) it will be nice to have both 2 wheels and 4. Remember the snow doesn't matter anymore as these things plow through anything! I also wanted to mention that as your read the limited information, many people are worried about the lack of power steering. Not only would that add more weight it would add more $$. You simply don't need it and in my opinion will make you soft. This quad steers like any other if not easier due to the larger tire size and increased ground clearance. I can see its place on a XMR navigating the skag with giant tires but its a luxury. Your dirt bike doesn't have any storage so why would you need any now? You don't and is what backpacks are for. I think your really going to like the new couch on wheels lifestyle...
@Trail_Blaster5 ай бұрын
@@350iroc9 Yeah I just wanted a change of pace honestly alot of the people I ride with have ATVs and we have miles of trails that are definitely not dirt bike friendly. I have been on a 21 Renegade 1000xxc but honestly it's alot of money and for riding trails it's a lot of bike. Where I live in Canada the the 1000 is 23 grand after taxes. Absolutely insane lol.
@350iroc95 ай бұрын
$23,000! that's out of control. The 1000 is $16,000 and the 650 is around $10,000 around here.
@350iroc95 ай бұрын
I'm not sure how to answer this question other than this quad is definitely not stock anymore and that's a good thing. Everything that has been added over the years has improved it. Thank you for watching!
@flyingcuts99245 ай бұрын
Is this Blazer original ?😮
@LynxGenisys6 ай бұрын
16:10 - 17:55 is my favorite part. Its kinda how I ride.. lol.. I just like to go really fast sideways, and get from point A- B as fast as I can on bush trails... lol I'd like to try entering a Hare Scramble lol You should consider trying a twist throttle. I think you"d like it better. for comfort, and fatigue etc anyways, thanks for the vid, I realy enjoyed this!
@medievalman37376 ай бұрын
Had a 570 and loved her but sold it watching this makes me want to buy another one but 650!
@350iroc96 ай бұрын
WoW thank you that's very kind of you! Do you have anything to ride now after the 570? If not its time to get back out there! ATV's are my hobby and wish I could ride everyday. I was able to get this unit at a reasonable price using the Can-Am end of year rebate. If life allows then this is the time to get in! I'm just going back through everything to make sure everything is still tight and promise afterwards to make that walk around for you.
@medievalman37376 ай бұрын
@@350iroc9 I don’t but I’m in a better place now might have to get back into it! Can’t wait for the walk around!
@350iroc96 ай бұрын
Okay I will do that! Thanks for watching!
@medievalman37376 ай бұрын
Should do a walk around!
@jrhaines306 ай бұрын
Did you use all the banshee brake lines?
@350iroc96 ай бұрын
So I already had aftermarket braided brake lines installed due to the +2 +1 A-arms requiring the lines to be longer. You can certainly use the stock brake lines as the banjo bolts are exactly the same. This upgrade is worth every penny and wish I would of done it long ago. You can literally lock up the front tires on command with one finger yet are very precise as needed.
@aafrankie32116 ай бұрын
Looks like so much fun!
@aafrankie32116 ай бұрын
They both seem nuts lol
@coleerbacher71456 ай бұрын
That bridge gives me the chills..
@LCSYT6 ай бұрын
how much would you recommend a yfz 450
@350iroc96 ай бұрын
I absolutely love my 450! Yesterday I was riding my buddies 2020 Raptor and I'm glad I went the 450 route. The only down side is the amount of money I needed to sink into it from stock. The stock exhaust sounds like a sewing machine. Once you upgrade the exhaust now you need some form of fuel programmer. Next the AIS emissions has to go and its up to you if you want an intake. After its all said and done its an absolutely amazing machine! You can drive it fast or you can drive it slow - it doesn't care. It has tons of power and is easy to drive yet is very good on gas consumption. I have a hour meter and after 3 years of ownership and 65 operating hours nothing has worn out. Yamaha's build quality is second to none and couldn't be happier with it. I hope that answers your question and thank you for watching!
@andregore10326 ай бұрын
What did you use to tune the fuel mixture?
@350iroc96 ай бұрын
I took my quad to BNR Motorsports in Lima Ohio and they flashed my Vortex with a custom map on their Dyno. The cost was $300 and worth it to make sure I was in the healthy range regarding Air/Fuel.
@willhutton15166 ай бұрын
You ever been to the pike county APV area? I’ve been once but had to cut the ride short due to a corroded battery terminal. Hoping to get out there again next year. They open up the first week of April, and it’s free to go to so long as you got the apv sticker/plate. Gotta have a title or COO to get it.
@350iroc96 ай бұрын
Hi there and thank you for the comment. I can not say I've been there before and honestly wasn't aware of it. Now that you have brought it to my attention I did mark it on the map and will make an effort to visit this place so thank you!
@wickership4147 ай бұрын
"Got to be careful, they're a lot of little kids" Braaaaap braaap BRAAAAP!!😂
@brianrzewnicki69627 ай бұрын
In your experience was it easier to install the RP Race intake vs. the FCI or about the same level of PAIN IN THE ASS? Thanks
@ericthedude94577 ай бұрын
Does it have to be 07 calipers with the 08 master cylinder? Can't it just be all 08? What is the latest year that the banshee will support?
@350iroc97 ай бұрын
You can use any years from 2007 to current for the Master Cylinder and calipers. The 2006 and earlier were different. Master Cylinder Part# 5D3-2583T-02-00 Front Caliper (Right) Part# 5TG-2580U-12-00 Front Caliper (Left) Part# 5TG-2580T-12-00 I used the 07 and 08 because that is what I had. As a follow up this brake upgrade is 1000% better stopping power than stock and highly recommend it! Thanks for watching!
@mikem96203 ай бұрын
Hi guys. Great info. Please help... Will the 07 and up calipers fit on a 06 banshee?
@mikem96203 ай бұрын
What year banshees are you guys referring to?
@lukemcpherson92717 ай бұрын
my cousin did a back flip on a 2 stroke banchi 4 wheeler. now he got a air plane and drops toilet paper over the fort rock oregon house funny funny
@phoenixarizona84417 ай бұрын
Gotta love the sound of a twin 2 stroke Yamaha banshee or twin snowmobile engine
@350iroc97 ай бұрын
I definitely agree as there is nothing like it! I can't even tell you the amount of people that approach me because of this quad. It seems like everyone has a story to tell from back in the day its absolutely amazing! Thank you for watching and thank you for the comment!
@Parker426838 ай бұрын
“Those look like democrats or something “ 😂 🤘🏻
@350iroc98 ай бұрын
Honest to God right! 🙄
@brianrzewnicki69629 ай бұрын
Great video....I just bought one of the RP Race intakes. Do you recall what size panhead bolts you used and what length they were? I don't want to deal with the whole rivet thing either. Thanks in advance!
@350iroc99 ай бұрын
I think those were M8 16mm - 18mm button head bolts. I just used whatever was in my spare bolt bin. You would need two people to do the rivet method because the box is so slippery and odd shaped.
@brianrzewnicki69629 ай бұрын
@@350iroc9 Awesome...thank you for the response. Much appreciated.
@Keith-ms6hb9 ай бұрын
Wow❤
@350iroc99 ай бұрын
Thank you for watching Keith!
@Floridawoodsbanshee9 ай бұрын
Nice looking trail system. Kinda looks like wolf pen gap in AR. Or parts of bills creek in OK.
@350iroc99 ай бұрын
That is interesting but not even close. These are once again in southern Ohio.
@Floridawoodsbanshee9 ай бұрын
@@350iroc9 yes I know. That's why i said kinda. The national forest on the AR/OK area is very similar 😀
@MDNT_Garage9 ай бұрын
where can i get that cut out for the airbox
@350iroc99 ай бұрын
You can find the cutout at EHS Racing
@MDNT_Garage9 ай бұрын
@@350iroc9 THANK YOU!!!
@alfonsmeyer-fc2pq9 ай бұрын
Das beste Quwad das jemals gebaut wurde 👍👌👏
@350iroc99 ай бұрын
Translation: "The best quad ever built!" Jawohl! Vielen Dank fürs Zuschauen!
@aleksey09510 ай бұрын
loh
@Drain0910 ай бұрын
Looking at banshees now. I have a Raptor 700r and yfz450r. Should I just pick up another yfz450 since can find better deals on them compared to the Yamaha banshee which are like $5k compared the $3.8-4.5k for a yfz with better suspension and newer tech.
@350iroc910 ай бұрын
If it was me I don't think I would buy a duplicate machine unless you plan on someone else riding it.
@Drain0910 ай бұрын
@@350iroc9 yeah I rotate through them but don’t know if I want to ride a Banshee all the time while others ride the yfz and Raptor since not as good riders. Buying multiple ones for family and friends to ride with when go to dunes and trails. Still cheaper then a SXS getting multiple rides.
@350iroc910 ай бұрын
Well I think the Banshee is a good investment currently and feel that what ever you spend on it you should certainly get it back and then some. All of the other bikes like YFZ and Raptor will only depreciate since they are still in production. I just got back from another ride weekend and took the Banshee out again for the third time in a row. I normally alternate but honestly if its not a mud bath I really do prefer the Banshee over the YFZ. It's absolutely amazing to me the attention it brings these days. There was a point you couldn't give them away but now its become a favorite with the old and especially new kid riders. I think everyone is just board with bland looking and sounding 4x4's dressed in camo. The SXS people around here are properly named "dirt turtles" because our trail system only allows for the small ones <50" so no excitement there. For 5K I would hope you can find a Banshee with +2+1 A-Arms, shocks, adjustable width axle, pipes, reeds and properly jetted for your area. Can I ask what state you live in or where you plan to ride? Have you ever owned a Banshee before?
@Drain099 ай бұрын
@@350iroc9 Oklahoma, I’ve never ridden a banshee, always wanted one growing up. I raced YZ250 and YZ125 2 stokes and prefer them over the 4 stroke dirt bikes. Just riding trails and mainly sand dune trips at Little Sahara state park in OK for atv riding. It’s easier to ride with my kids on atvs then it is dirt bikes so they have atvs.
@stevensdale10 ай бұрын
where are those wide, smooth, trails?
@350iroc910 ай бұрын
These trails are located inside Wayne National Forest in southern Ohio. Thanks for watching!
@stevensdale10 ай бұрын
@@350iroc9 are you going to be at wailing Wayne?
@350iroc910 ай бұрын
No I'm not unfortunately but some of my friends will be. I will be there this weekend coming up. @@stevensdale
@Rudimentary00710 ай бұрын
Damn cool. Beautiful place to ride.💪👍🇺🇸
@350iroc910 ай бұрын
Thank you for watching! This is from Wayne National Forest in Southern Ohio! Love it there!
Пікірлер
What big 3 means
BIG 3 means - Intake , exhaust and a fuel management system upgrade. These 3 things alone will unlock your quads true potential as the factory intended. Because of EPA restrictions these quads are sent out in kitten mode but can be turned into a lion with the BIG 3!
@@350iroc9 I’m going to do these upgrades before I build the motor thanks a lot
Wayne National Forest?
Yes Wayne National Forest!
Ru running stock tires ?
Yes I have the stock ITP Holeshot tires still on there. They are really good in the mud and super good on the street.
The roads in Nashville are worse than that! 😂
LOL I'm sure! Where did all that infrastructure money go? I actually just got back from this same ride location and currently it's a mess. When this video was filmed it was the best it's ever been there. They claim there is no funding to fix the trails this year. Thanks for watching!
What trail system is this
This is the Pocahontas Trail System. Here is a link to it: trailsheaven.com/plan-your-trip/choose-a-trail/pocahontas/
Just finished rebuilding the entire rear end of mine today and finally got to take a rip after 6 months down 😊
So how did she run?
What’s your top speed with your mods
I was able to get to 76 MPH and ran out of room.
Oh man I've been waiting for this footage!!
My question is which is better the banshee or the 450 i am stuck between the 2 don’t really know which one to buy honestly my heart says banshee but i like the way the 450 looks could you help me out asap lol im going next weekend to purchase a banshee want to make sure its the right move i heard banshees break a lot and heard the 450 really don’t break at all
And also how does it handle in glamis? Especially me being a big dude im heavy set you think the banshee could pull me around or should i go with the 450
If you are heavy set then 450 all day is the best option. The Banshee in Glamis really has to work with a big fella piloting it. They will boil easily with aggressive sand paddles. The 450 is so much easier to ride in the dunes and gets twice the gas mileage. I've had zero issues in my 65 hours of operation with the 450. In fact the only reason I have it is because I burned up my Banshee's electrical system in Glamis because it got too hot. If you have never owned a Banshee before then just skip it honestly. They are way too expensive now. Spend your time riding and not working on it all the time is my recommendation. You won't be disappointed with a 450. I also think the 450 is a better quad than the Raptor if you were considering it.
That was mesmerizing to watch and I would have loved it, excellent riding
Thank you Mr. Roberts!
It is relaxing and smooth
It’s a great woods machine, If you know how to ride it.
Wishing I would of bought one 5-6 years ago when I was seeing them anywhere from 3k -5k, now something used and ridable is 10k+
I remember a time you couldn't give them away! These quads were about 6K new 30 Years ago.
Still THE KING 👑
Whats all done to it as far as in thus video?
Ported Heads 60 over pistons Phat Head with 19mm domes 28mm PWK Flat slides running 160 main and 55 pilot FMF Fatty Pipes Elka Stage 3 all around with Elka Link system +1 +2 Alba A-Arms Lone Star +0 swing arm Dominator axle YFZ450 Front brake conversion South Texas nose mount harness that relocates the CDI, rectifier and coolant bottle to the nose. That I think is all the main components. Tons of incidentals not worth mentioning. Thanks for watching!
Can’t believe how smooth she runs. Sounds like it be happy putting around all day.
Yes thank you! Here is another from the other side! kzread.info/dash/bejne/qmlntJODj5fKqqQ.html
Sr., What year is your banshee? Mine is 06... Will those 07 yfz calipers be compatible with my 06 banshee ? Thanks in advance.
I have a 95. You can use the 07 YFZ calipers no problem. Make sure to also use the 07 master cylinder because it has more fluid volume. Additionally you can use your current Banshee brake lines since the banjo bolt is the same. This is a GOOD upgrade and wish I would of done it earlier! The front tires will lock up now if I want!
Man, this takes me back when I used to go on trails with my dad. Edit: No, he's not dead, we just don't do it anymore I dont know why.
Well there is only one way to find out - ask him..Push him a bit and afterwards he will thank you! Thanks for watching and hope you can get back out there!
Best ever made
YES! Thank you for watching!
Greetings from the USA. If you ever visit here you can ride the Yamaha Banshee to experience it yourself!
mantap bang
Mantap is an Indonesian word which means “Excellent.” Thank You!
salam dari indonesia bang @@350iroc9
Hey buddy I just got the same bike but it is the base model and I want to get fox shock. Where did you get yours????
Hi there! I purchased mine from Rocky Mountain ATV/MC. To start I decided to only purchase the fronts to make sure they fit. As you already know there is limited information/options on this subject. Don't bother contacting Elka as they don't produce anything for our year. The fronts I purchased are from the 2023 XXC 1000R parts list. They are called FOX 1.5 PODIUM RC2. The shock bodies are sold separately from the springs. In my case and because I wasn't sure I also purchased the springs to be safe. In hind sight I didn't need to as they are the same springs used on the stock FOX shocks as a FYI. Here is a link to the OEM parts finder: www.rockymountainatvmc.com/oem-schematic/10 Drill down to Can-AM > ATV> 2023> ATV-North America-Renegade-Series> Renegade 1000R EFI - XXC - North America The Can-AM part number is 706203208 for the fronts and 706004492 for the rears.
im getting mine next week. does it wheelie easier now with all the parts on it ?
Hi there and thank you for the question. The ride park I was testing at is mainly sand so the tires would only spin. Honestly this was only the third ride for me on this machine. During the initial break in weekend it was raining and mud for miles so again limited traction. Right out of the gate I ordered the HMF exhaust system with the Power Vision 3 tuner. Both of these upgrades helped but I still needed more. The QSC REV-X primary clutch is a bit spendy at $1200 but quickly became the flagship upgrade. Now the power spools up like "right now"! My riding background is with sport quads and are my primary machines in select areas. The CVT 4x4 platform is new to me still. My reasoning/vision for purchasing this machine is to branch out and explore more riding areas that I wouldn't consider before. Sport Quads are no fun in heavy mud and water because you simply can't keep your goggles clean to see. If you can't see then spin the wheel of pain. Endless large rock trails will not only destroy a Sport Quad but will also knock the fillings out of your teeth. Already with the small amount of time I've had to enjoy the Renegade I've gone further longer than my other machines. This suggests that my plan is working but its like living in two very different worlds. 800lbs is not 400lbs and you know it on these. Lastly congratulations on your purchase! There's nothing like bringing home something new that you can get into and make it your own. Keep in touch because if you reside in the US I'm sure you've noticed the 650 Renegade is a bit of a Unicorn.
@@350iroc9 well thanks for the reply. Yeah it's hard to find any reviews or people that have them. I've only seen one in my area. It seemed fast and sounded amazing your bike seems to rip as well I really like the Renegade much like u i like the sport look. I guess I'll find out next week. If it doesn't snow before then. Cheers!!
I took a look at your channel and it appears your dirt bike rider! I also ran dirt bikes in my earlier days retiring on a 1989 CR250. So for you (i'm assuming here) it will be nice to have both 2 wheels and 4. Remember the snow doesn't matter anymore as these things plow through anything! I also wanted to mention that as your read the limited information, many people are worried about the lack of power steering. Not only would that add more weight it would add more $$. You simply don't need it and in my opinion will make you soft. This quad steers like any other if not easier due to the larger tire size and increased ground clearance. I can see its place on a XMR navigating the skag with giant tires but its a luxury. Your dirt bike doesn't have any storage so why would you need any now? You don't and is what backpacks are for. I think your really going to like the new couch on wheels lifestyle...
@@350iroc9 Yeah I just wanted a change of pace honestly alot of the people I ride with have ATVs and we have miles of trails that are definitely not dirt bike friendly. I have been on a 21 Renegade 1000xxc but honestly it's alot of money and for riding trails it's a lot of bike. Where I live in Canada the the 1000 is 23 grand after taxes. Absolutely insane lol.
$23,000! that's out of control. The 1000 is $16,000 and the 650 is around $10,000 around here.
I'm not sure how to answer this question other than this quad is definitely not stock anymore and that's a good thing. Everything that has been added over the years has improved it. Thank you for watching!
Is this Blazer original ?😮
16:10 - 17:55 is my favorite part. Its kinda how I ride.. lol.. I just like to go really fast sideways, and get from point A- B as fast as I can on bush trails... lol I'd like to try entering a Hare Scramble lol You should consider trying a twist throttle. I think you"d like it better. for comfort, and fatigue etc anyways, thanks for the vid, I realy enjoyed this!
Had a 570 and loved her but sold it watching this makes me want to buy another one but 650!
WoW thank you that's very kind of you! Do you have anything to ride now after the 570? If not its time to get back out there! ATV's are my hobby and wish I could ride everyday. I was able to get this unit at a reasonable price using the Can-Am end of year rebate. If life allows then this is the time to get in! I'm just going back through everything to make sure everything is still tight and promise afterwards to make that walk around for you.
@@350iroc9 I don’t but I’m in a better place now might have to get back into it! Can’t wait for the walk around!
Okay I will do that! Thanks for watching!
Should do a walk around!
Did you use all the banshee brake lines?
So I already had aftermarket braided brake lines installed due to the +2 +1 A-arms requiring the lines to be longer. You can certainly use the stock brake lines as the banjo bolts are exactly the same. This upgrade is worth every penny and wish I would of done it long ago. You can literally lock up the front tires on command with one finger yet are very precise as needed.
Looks like so much fun!
They both seem nuts lol
That bridge gives me the chills..
how much would you recommend a yfz 450
I absolutely love my 450! Yesterday I was riding my buddies 2020 Raptor and I'm glad I went the 450 route. The only down side is the amount of money I needed to sink into it from stock. The stock exhaust sounds like a sewing machine. Once you upgrade the exhaust now you need some form of fuel programmer. Next the AIS emissions has to go and its up to you if you want an intake. After its all said and done its an absolutely amazing machine! You can drive it fast or you can drive it slow - it doesn't care. It has tons of power and is easy to drive yet is very good on gas consumption. I have a hour meter and after 3 years of ownership and 65 operating hours nothing has worn out. Yamaha's build quality is second to none and couldn't be happier with it. I hope that answers your question and thank you for watching!
What did you use to tune the fuel mixture?
I took my quad to BNR Motorsports in Lima Ohio and they flashed my Vortex with a custom map on their Dyno. The cost was $300 and worth it to make sure I was in the healthy range regarding Air/Fuel.
You ever been to the pike county APV area? I’ve been once but had to cut the ride short due to a corroded battery terminal. Hoping to get out there again next year. They open up the first week of April, and it’s free to go to so long as you got the apv sticker/plate. Gotta have a title or COO to get it.
Hi there and thank you for the comment. I can not say I've been there before and honestly wasn't aware of it. Now that you have brought it to my attention I did mark it on the map and will make an effort to visit this place so thank you!
"Got to be careful, they're a lot of little kids" Braaaaap braaap BRAAAAP!!😂
In your experience was it easier to install the RP Race intake vs. the FCI or about the same level of PAIN IN THE ASS? Thanks
Does it have to be 07 calipers with the 08 master cylinder? Can't it just be all 08? What is the latest year that the banshee will support?
You can use any years from 2007 to current for the Master Cylinder and calipers. The 2006 and earlier were different. Master Cylinder Part# 5D3-2583T-02-00 Front Caliper (Right) Part# 5TG-2580U-12-00 Front Caliper (Left) Part# 5TG-2580T-12-00 I used the 07 and 08 because that is what I had. As a follow up this brake upgrade is 1000% better stopping power than stock and highly recommend it! Thanks for watching!
Hi guys. Great info. Please help... Will the 07 and up calipers fit on a 06 banshee?
What year banshees are you guys referring to?
my cousin did a back flip on a 2 stroke banchi 4 wheeler. now he got a air plane and drops toilet paper over the fort rock oregon house funny funny
Gotta love the sound of a twin 2 stroke Yamaha banshee or twin snowmobile engine
I definitely agree as there is nothing like it! I can't even tell you the amount of people that approach me because of this quad. It seems like everyone has a story to tell from back in the day its absolutely amazing! Thank you for watching and thank you for the comment!
“Those look like democrats or something “ 😂 🤘🏻
Honest to God right! 🙄
Great video....I just bought one of the RP Race intakes. Do you recall what size panhead bolts you used and what length they were? I don't want to deal with the whole rivet thing either. Thanks in advance!
I think those were M8 16mm - 18mm button head bolts. I just used whatever was in my spare bolt bin. You would need two people to do the rivet method because the box is so slippery and odd shaped.
@@350iroc9 Awesome...thank you for the response. Much appreciated.
Wow❤
Thank you for watching Keith!
Nice looking trail system. Kinda looks like wolf pen gap in AR. Or parts of bills creek in OK.
That is interesting but not even close. These are once again in southern Ohio.
@@350iroc9 yes I know. That's why i said kinda. The national forest on the AR/OK area is very similar 😀
where can i get that cut out for the airbox
You can find the cutout at EHS Racing
@@350iroc9 THANK YOU!!!
Das beste Quwad das jemals gebaut wurde 👍👌👏
Translation: "The best quad ever built!" Jawohl! Vielen Dank fürs Zuschauen!
loh
Looking at banshees now. I have a Raptor 700r and yfz450r. Should I just pick up another yfz450 since can find better deals on them compared to the Yamaha banshee which are like $5k compared the $3.8-4.5k for a yfz with better suspension and newer tech.
If it was me I don't think I would buy a duplicate machine unless you plan on someone else riding it.
@@350iroc9 yeah I rotate through them but don’t know if I want to ride a Banshee all the time while others ride the yfz and Raptor since not as good riders. Buying multiple ones for family and friends to ride with when go to dunes and trails. Still cheaper then a SXS getting multiple rides.
Well I think the Banshee is a good investment currently and feel that what ever you spend on it you should certainly get it back and then some. All of the other bikes like YFZ and Raptor will only depreciate since they are still in production. I just got back from another ride weekend and took the Banshee out again for the third time in a row. I normally alternate but honestly if its not a mud bath I really do prefer the Banshee over the YFZ. It's absolutely amazing to me the attention it brings these days. There was a point you couldn't give them away but now its become a favorite with the old and especially new kid riders. I think everyone is just board with bland looking and sounding 4x4's dressed in camo. The SXS people around here are properly named "dirt turtles" because our trail system only allows for the small ones <50" so no excitement there. For 5K I would hope you can find a Banshee with +2+1 A-Arms, shocks, adjustable width axle, pipes, reeds and properly jetted for your area. Can I ask what state you live in or where you plan to ride? Have you ever owned a Banshee before?
@@350iroc9 Oklahoma, I’ve never ridden a banshee, always wanted one growing up. I raced YZ250 and YZ125 2 stokes and prefer them over the 4 stroke dirt bikes. Just riding trails and mainly sand dune trips at Little Sahara state park in OK for atv riding. It’s easier to ride with my kids on atvs then it is dirt bikes so they have atvs.
where are those wide, smooth, trails?
These trails are located inside Wayne National Forest in southern Ohio. Thanks for watching!
@@350iroc9 are you going to be at wailing Wayne?
No I'm not unfortunately but some of my friends will be. I will be there this weekend coming up. @@stevensdale
Damn cool. Beautiful place to ride.💪👍🇺🇸
Thank you for watching! This is from Wayne National Forest in Southern Ohio! Love it there!