Great video - just enough info and images, without a ton of chit chat.

@Schneids15

3 жыл бұрын

Thank you!

Great video I did pack my bearings with grease

Really good job, good vidéo!

Great video. I have done this before but yours was a beautiful review. Thank you.

@Jenuin

2 жыл бұрын

Found my old comment. Hahaha 😝

Thanks for the video, it helped!

Nice job ! Take your time and do it right.

@Schneids15

4 жыл бұрын

Thanks! Yep i did. It was worth taking the time. I tried to make it into as speedy of a video as i could though.

Nice video! Very well done.

@Schneids15

2 жыл бұрын

Thanks Andy.

Awesome video! Thank you!

Great video thank you 👍🏽👍🏽

Great video, I can almost smell the gear oil. Guess what I'll be doing soon.

Thank you 😊

Not my account. But solid truck dog! Just bought a 24 valve 02 and my wheel bearing blew and snapped the axle shaft so I'm putting a whole new rear in, out of a 00. Has drums so we're gonna fab up custom brackets for the brakes, I already wire wheels most of my frame, gonna wash it and rust prep it, paint it up and oil the fuck out of it and have er lookin just like this one. Deeeadly Please do yourself a favour and order parts off rock auto.. I got bearings, races, seals, HD brake pads front and back in my cart for 100 bucks, getting some shocks too and probably e brake parts and who knows what else. But most of it comes at a reasonable price and you have options. Whether you want economy, standard, performance, or hd parts. A huge selection, different brands etc. Right on though thanks for the vid. Helpful

Super Duper Job

@Schneids15

4 жыл бұрын

Thanks Steve. How does the audio sound on your end? I thought it seemed like it was a little quiet upon uploading.

@stevelovell7727

4 жыл бұрын

@@Schneids15 The audio is Perfect..Like the work you do

@Schneids15

4 жыл бұрын

Thanks Steve. How is the virus doing your way? We have laws now to wear masks everywhere inside.

@stevelovell7727

4 жыл бұрын

@@Schneids15 Josh, I personally think its a fabricated hoax. We are heading into a one world government. I bought a few face shields to do my shopping at Walmart etc..I refuse to wear a mask. We have 1.4 million out of work and you know as well as I that if American falls, so will Canada..Bad times lie ahead my friend

@Schneids15

4 жыл бұрын

Steve i agree to a point for sure. It is a hard one to know for sure? But i agree. I would like to buy my own house. I make a wage that is on the higher side and it is still hard to afford something. There is nothing selling here below 400K. I am hoping that the market will collapse and i can buy something.

Correct me if im wrong. If the wheel seal is functioning correctly, your not mixing oils. Diff fluid stays in axle tube, and the bearing grease stays in the bearings/hub? Great video, appreciate the walk-through.

@Schneids15

2 жыл бұрын

Hey, so not true the diff lube can flow all the way out to the hub and lubricates it as well. A friend of mine said when he does them he jacks up one side high and lets the oil flow down the tube to the hub and reverse procedure for other side then he knows he has the oil at the bearings.

Can you show all part #s

Would those part numbers be the same for a 3500?

@Schneids15

3 жыл бұрын

I can't guarantee they are. Do a NAPA online search and enter your truck and it should come up. A 3500 will have a different axle so i can't see they will be the same. Josh

Why did you take of the diff cover?

@Schneids15

3 жыл бұрын

Hey Tyler. Just to simply do a fluid change while i was in there.

Does it really need the limited slip additive?

@Karskyle70

2 жыл бұрын

If you have a limited slip rear end you will need the additive

What s axle nut socket size ?

@Unstricted1217

2 жыл бұрын

2 9/16

Haynes repair manual says hub nut should be tightened to 22 ft lb’s then back off 1/4 of a turn where did you get 120-140 ft lb’s??

@Schneids15

8 ай бұрын

My manual states that, then back off. Either way it is just to make sure everything is seated then you give it a little end play.

@Awalk05

8 ай бұрын

@@Schneids15 Oh ok I was just worried didn’t want to screw mine up, attempting to do this today along with pinion seal. I’m wondering if specs are different depending on if your using new or old bearings?? It’s such a big difference in torque value, curious how 22 ft lb’s then 120-140 ft lb’s is ok doing either

You do not have any jack stands underneath the rear axle Reliant upon the Jack only the holdup a vehicle is a fallacy

@Schneids15

4 жыл бұрын

You are correct. I could not safely get one on my axle with my jack in place. However there is a stack of blocks further ahead on the frame. Yes if the jack came out the suspension would push down a few inches.

What year is that truck

@Schneids15

Жыл бұрын

99

@lissandavegreen

11 ай бұрын

Tks do you have any in and out Freeplay on the hub when you get done? Mine is leaking I tore it down but gotta get a socket today. But my hub will slide in and out about 2 or 3 mm

Not to be picky, but you mentioned the star pattern and what was in the video was definitely not that.

@Schneids15

3 жыл бұрын

No problem. It is good criticism. I did tighten them in a star pattern but it was edited out. I usually do that initially with the impact, then run around a circle with the impact and hold it for a second or 2 then torque in a circle. The impact usually gets it right about to the 150 torque.

Tsk tsk those are not impact sockets 😂

Can you show all part #s