Nice and simple for the backyard DIY type.

Big help!! Thanks so much for this video!! Gonna start now.

@TheDogHousetv

5 ай бұрын

No problem! Good luck with it 💪

I'm bout to do one like this one thanks alot bud this video helps me alot 🍍🤠💯

Good job, we just did one today!

You saved yourself around $600. Nice work on the vid! Reminds me of wrenching on stuff in AZ at the apartment complex we lived in while attending MMI/UTI…

@TheDogHousetv

2 ай бұрын

You know it brother! Any dollar i can save i will surely try to do so! & man that apartment saw so many things taken apart, fixed, broken & welded. I’m sure i drove most of the neighbors crazy. I’m sure you did the same, thank you for commenting brother 🙏❤️💪

I did mine similar before watching this video now I got to takeoff the pinion nut so I can talk it to the right specs I over torqued it with my impact

@TheDogHousetv

4 жыл бұрын

Awww damn man, I’m sorry to hear that. Hopefully you’ll get it good again

Good stuff thanks

Something else I would mention is to block the wheels to avoid the truck moving once you disconnect the driveshaft. The truck will roll freely if there is any type of incline.

@ajkemer

11 ай бұрын

Parking brake if operable works as well

@misterj5045

11 ай бұрын

@@ajkemer I don't trust em 😂

@KompleteMania

8 ай бұрын

@@misterj5045literally just ran over both my legs because I forgot to block the wheels. Thankfully I’m okay, sore but okay. DON’T FORGET TO BLOCK THE WHEELS

@Hewston

6 ай бұрын

Ive been a mechanic for 4 years and just forgot to do this like 20 minutes ago

Comment left strictly for your benefit! New sub too 👍

@TheDogHousetv

2 ай бұрын

Thank you Joey! Much appreciated ❤️🙏🇺🇸💪

Did you put Grease or sealer on that metal sleeve that you bought at advanced auto?

no rtv or gasket on the diff cover reinstall ? what was the pattern and how tight do those cover bolts need to be ? thinking your leaving out some important stuff especially if you were correting a leak and making new ones on that cover replacement ?those to mating surfaces are huge and prone to leak if not cleaned and installed evenly with sealant and or gasket?

@TheDogHousetv

2 жыл бұрын

Lmao that’s common sense brother, it doesn’t take rocket science to apply RTV to a diff cover. If you have the knowledge to attempt a pinion seal, i would pray to god you have the knowledge to seal your diff cover

Where you buy the pinion housing i dont know the name sorry ,

@TheDogHousetv

3 жыл бұрын

I got everything from advanced auto

You didnt replace the crush collar on the other side of the bearing?

@TheDogHousetv

3 жыл бұрын

There’s no crush collar on a d70 in a dodge.. there’s only shim/spacer for bearing preload. Unless I’m mistaken

@michaelgearhart6685

3 жыл бұрын

@@TheDogHousetv ok and I'm currently trying to find the right size repair sleeve one I got same part number as the video was way to small and I'm not having the greatest luck finding the correct size

@paintham9430

3 жыл бұрын

Yeah, these are shimmed. But even if it was a crush sleeve axle- I would only get a new CS if i rebuilt the differential and put in a new pinion bearing set. If i just re-sealed like in the video, just re-torque for bearing spec. I didn’t know about the new sleeve, i normally just replace the yoke if it’s that bad.

Do you have a part number for the seal?

@TheDogHousetv

Жыл бұрын

Unfortunately i don’t! I’m sorry

hows the s13 shell comming along mate? ive just re done my clutch and all my seals guna get a haltech and a gt2871r

@TheDogHousetv

4 жыл бұрын

Little by little she’s coming along, I’ve got some stuff coming up for the coupe this week! I’m excited to share it with you guys. I’m going to need a clutch myself, what did you end up going with?

@pattyb7521

4 жыл бұрын

@@TheDogHousetv i went with a exedy 5 puck sprung , also ended up going with low mount td06 and external wastegate waiting on exu and injectors to finish

Kind of a dumb question but is the pinion bearing lubricated by the differential fluid? Or is it a sealed bearings?

@TheDogHousetv

3 жыл бұрын

My first thoughts are diff fluid

@TheDogHousetv

3 жыл бұрын

Grease and gear oil don’t mix well lmao

So does it have to be in neutral??

@TheDogHousetv

2 жыл бұрын

makes life easier

Dude, thanks for the video. Buy a $10 seal puller. It all save you sooooo much dikn around

@TheDogHousetv

Жыл бұрын

No problem & yeah i have one now 😂😂😂 i was a youngin’ lackin back then

the guy at six states distributors told me if the pinion had that groove, the speedy sleeve would get it also in a very short time. has anyone had that issue? he told me just replace the pinion so I wouldn't have to worry about the leak again

@TheDogHousetv

2 жыл бұрын

It will eventually cut into the wear sleeve, but that’s the point of a wear sleeve. If it took 200k miles for it to start leaking. I’m sure the wear sleeve will last 100k +

@jdhappy7663

2 жыл бұрын

@@TheDogHousetv thank you

@timmytorco

Жыл бұрын

I’ve been using speedy sleeves for 20 years. Never had one wear out. Use them on cranks, yokes….

I have the m60hd rear axle in mine. The sleeve you put on the yoke on yours do you have a part number for the one I need? If not no biggie but what is the axle code in you're glove box for the rear? Mine is mentioned above and I'm curious if yours is the same.

@mcraigb1

2 жыл бұрын

If you look at the box on the video, you'll see the range size 1.872" - 1.878", all you have to do is mic your yoke and order by O.D. range!

@parkersgarage4216

2 жыл бұрын

@@mcraigb1 appreciate the response, I figured it out last week thanks though.

first diesel owner with man bun....lol

@TheDogHousetv

3 жыл бұрын

You’re like 2 years late homie hahaha i had long hair for quite sometime

You cut out the ONLY thing I came to this “detailed” video for.

@TheDogHousetv

3 жыл бұрын

Really?! What might that be.... it’s a pretty easy job