National 710498 Wheel Seal amzn.to/3nrss2k 18 Pc Heavy Duty Axles Slide Hammer Set amzn.to/3ETshm9 Astro Nano 3/8 Impact amzn.to/2TYs21o CASOMAN 3/8" Drive Impact Socket Set amzn.to/384EBQm 20762A Oil Drain Pan amzn.to/3SGzX0N Performance Tool W1141 Quick Fit Fluid Transfer Pump amzn.to/3Zw3ME5 Yukon Gear & Axle (AK 6410) Rear Wheel Bearing & Seal Kit for Dodge amzn.to/3L9gLXZ Augo Ratchet Straps amzn.to/3XEkbIn 737mechanic Amazon Store Front www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK

I did mine a couple weeks ago it wasn't as bad as I thought it would be. Great video!

Great video! Real life saver! The one thing I would do differently next time is: reinstall the pin after c clip removal, until reassembly, to avoid having the spider gears come out. They were definitely a real challenge to reinstall. Thanks much for your help,

Concise, to the point, and had all the info I needed. Didnt need to constantly skip through the video. Great work!

Thank you for making this video sir. Good job helping out a friendly neighbor! 👍🏽

Thank you! I’m pretty confident now. Best diy!

Thabks for the video. I just did mine today and you helped me greatly. I had no idea how and your video showed me. Even my spider gears fell out also. Lol

@737mechanic

Жыл бұрын

Glad to hear it helped. That's why I do these and sometimes I wonder if it is worth it.

thanks for the detailed video, so helpful

Great video , thank you for this!

Thank You for sharing 👍

Well done!

Great video! Thanks!

Thanks dad! 🤗

Great video.

What bearing and seal setter do you recommend? I have to do my drivers side axle. Thanks

God bless you for the great knowledge as always

I was doing my driver side where you see that not out on mine. It’s on the bottom and my pan won’t come out from the shaft. The clip could be upside down.

Thats some cowboy shit right there driving that bearing in with an airhammer lol

Theres a drain bold on the side of the diffrential

@737mechanic

5 ай бұрын

Yes, but why remove it if you are going to remove the cover anyway.

@Coaster709

5 ай бұрын

@@737mechanic true enough

The axle you purchased was it the exact same length of the axle you took out? I purchased a kit from oreilys and it’s 3/16th inch longer

@737mechanic

Жыл бұрын

3/16 is fine as long the bearing rides on the machined surface.

Hi been watching this video over and over. You make it look pretty easy, so I purchased axle shaft bearing and seal. I have 2016 dodge ram 1500 and I am sure my right rear(passenger side) So my brother and I tore into this job. Everything was going pretty good until it was time for the C clip to fall out. It didn't. It i loose. Spins round and round when we coax it with a screw driver. But it doesn't come off. Called a mechanic family member out of state and said we should put the two spider gears back in place which feel out in all of this, not sure how easy or hard that will be and once we have that try moving shaft in or out???? shaft doesn't seem to budge very much at all. Not in or out. It spins or turns, but not in or out. He said that my right spider gear is not seated, I think I understand what he means but how can you reseat that?? What a job.... Trying to save a few bucks,, Im sure it's worth it all for the lesson alone. I am so sketic of service centers, you can't imagine. That is my main reason for doing this myself.... You think you can help in anyway???? I appreciate your time and your video. Thank YOUl Kathy K

@737mechanic

11 ай бұрын

Once the center pin is removed you may have to hit the axle with a hammer to push it in deeper before the c clip will fall out.

@kathykramer2418

11 ай бұрын

@@737mechanic That did the trick! Wonderful advice. My brother wacked it rwo times and as I watched it came flying out of there. We didn't have any more problems, everything was easy because of your video. My truck is now quiet as can be feels like a brand new truck. Thank YOU so Much, You are Appreciated.

@737mechanic

11 ай бұрын

@@kathykramer2418 I am glad to hear it. You made my day.

@kathykramer2418

11 ай бұрын

@@737mechanic You made my everything! My Ram truck is perfect again. Your video is Great!

Doing this now. Rear Rotors stuck on. Don’t want to hammer too much and ruin bearing. Any tips?

@737mechanic

10 ай бұрын

Spray them down with WD-40 and beat them off. I understand about the bearing but if you are unsure about it after beating it off you can replace it.

The one thing I wish people who made these videos would do, is list how many miles the vehicle has so people like me have a rough idea if it's time for a replacement lol

@737mechanic

3 ай бұрын

A lot of time I do but sometimes I don't think about it. If I remember correctly this truck had about 125,000 on it.

Did you have to Install a new axle due to frozen bearing on old axle?

@737mechanic

Жыл бұрын

Yes, in fact, this video kzread.info/dash/bejne/oqWDus6goqbagJc.html will be published tomorrow showing putting the tone ring and wheel studs on the new axle and then I cut the old bearing off the old axle to show the carnage the bad bearing caused.

Where’d you get the seal for the shaft at?

@737mechanic

Жыл бұрын

amzn.to/3nrss2k

I noticed you skipped the part where the axle was an issue, (understatement) where the axle didn't want to slide in enough to release the c clip, did you have an issue with this c clip ? How did you get the axle in enough to release it?

@737mechanic

Жыл бұрын

The c clip was fine and not an issue, I did have to use a hammer to get the axle to move in enough for the c clip to fall out. The biggest problem was getting the axle out.

@moodybluemotorsportsDwneKnos

Жыл бұрын

@@737mechanic yes sir, same issue here but my axle bearing was gaulded to the axle and axle was like welded in place so couldn't get the axle to slide in enough to release the c clip. Was a monster of a job, but finally got it out and back on the right track for my buddy. I enjoyed your video also , thanks for the reply sir, please subscribe to my channel and we can keep up with another's tasks weekly hahahaha 😂

@737mechanic

Жыл бұрын

@@moodybluemotorsportsDwneKnos Subscribed.

@RickySlatton

Жыл бұрын

@@moodybluemotorsportsDwneKnos Did he have any symptoms to know it was bad?

@jacobmansker9624

Жыл бұрын

@@moodybluemotorsportsDwneKnosdo you absolutely have to replace the shaft?

Where was the video of that “C clip” that “feel right out”. I never saw anything but gears.

@737mechanic

Жыл бұрын

Wow, I guess I didn't get that part in there. It actually showed the c clip fall out once I pushed the axle in far enough. I am going to have to look and see if I still have the footage and figure out what I did.

I'm getting ready to replace the left rear axle shaft (tone ring issue) i noticed the shaft you pulled out had a tone ring on it. Did I miss something or is it 2x4 versus 4x4? Great video with excellent information.

@737mechanic

11 ай бұрын

The truck was a 2wd but the tone ring is for the ABS system so I am sure a 4wd will be the same type of thing.

👍

Do I have to replace the shaft if I replace the bearing?

@737mechanic

Жыл бұрын

Only if the shaft is damaged.

Whats the torque spec on the pinion lock bolt?

@737mechanic

2 ай бұрын

19 ft/lbs and it says to use a new bolt with lock tight.

Why didn’t you not remove the drain plug from lower right side of the diff to drain? Much easier and less mess!

@DL101ca

Жыл бұрын

He has to take the cover off ,why bother with the drain plug ?

@spacecoastkid5033

Жыл бұрын

I've never seen a drain plug on the differential plate on a Dodge.

@_beastmode_rc

9 ай бұрын

@@spacecoastkid5033my 2014 zf 9.25 has a drain plug on the lower part of the differential case

@antman5959

4 ай бұрын

@@spacecoastkid5033their is one on all 4x4 and 2wheel.. bottom right

This is what happened to mine I fixed it. The whole reason why it was damaged in the 1st place because the ADS censor and when I didn't replace it in time? I. Noticed that it Melted the sensor and that also caused my Axel to break Where the sea clamp is at After I replaced the Axel and new c clamp I changed the wheel bearing as well This was about six months ago today the wheel bearing Broke and grinded inside the rotor causing damage to the a b s censor my question is what causes the wheelberry to do that or break itself ? Because I noticed the liquid oil behind the tire and inside the wheel so I. I knew the problem re occurred just didn't know why.

@737mechanic

Жыл бұрын

As long as the bearing was new and the axle was new and the diff fluid was at the proper level everything should have been good.

@ManuelHernandez-ko8sc

Жыл бұрын

@@737mechanic I replace the ABS sensor but it continues to come on so. My thing is how do I know if it's something other than just the? AB. S? Sensor because this is the 3rd time I replace it on the same side. The traction control light comes on. The truck delays and lags when I accelerate all the lights. Turn on for a quick 2nd and then they come off. But one thing's for sure my brakes lock up on that side rear right? Or at least they're engaging a small amount of pressure for it to heat up the rotor And call smoke to come out from that side of the wheel. It's hard to find a mechanic that can help. I'm insuring that it is something else other than just that part that I had replabecause. It's a continuing event for the last 3 Months I appreciate your help

@737mechanic

Жыл бұрын

@@ManuelHernandez-ko8sc you may have a wiring issue. what codes does it set?

Why not pack bearings with grease?

@737mechanic

11 ай бұрын

You can I guess but that is what the gear oil is for. They get lubed buy the gear lube in the first few feet of movement.

Why not cut the old bearing off? Would that be too risky in terms of damaging the axle?

@737mechanic

6 ай бұрын

If the axle has to be pulled out with a slide hammer the axle is already damaged. The bearing on this axle is not a press on type.

@BigHRepair

4 ай бұрын

​@@737mechanicgotcha. What brand axle shaft did you get? I see rockauto has a dorman pretty well priced. Was gonna get a Mopar bearing and seal

@737mechanic

4 ай бұрын

@@BigHRepair This is the one I used. www.rockauto.com/en/moreinfo.php?pk=13933609&cc=3310234&pt=10439&jsn=1

@BigHRepair

4 ай бұрын

@@737mechanic oh that's a whole kit. Didn't realize they sold them like that. Thanks I appreciate it

@737mechanic

4 ай бұрын

@@BigHRepair That is for the R/H side so if you need the drivers side make sure you order the other one.

No grease for new bearing ?

@737mechanic

Жыл бұрын

The new bearing is lubricated from the gear oil in the differential.

@piotrprzymecki8358

Жыл бұрын

@@737mechanic thank you, great video

@user-db6uv2op9c

Жыл бұрын

​@737mechanic yea some people like to add grease on new bearings so bearings can be safe before gear lube takes control.

dont you think you should have put some grease or at least gear oil on the bearing before installing axle

@737mechanic

Жыл бұрын

You can but gear lube will make it to the bearing in the first few feet of travel.

So you installed a new axle.

@737mechanic

Жыл бұрын

Tes, The axle was ruined entirely. So it got a new axle, bearing, and seal.

That's terrible. How did it get that bad and still drive! 🤣

@737mechanic

9 ай бұрын

I am surprised they didn't hear it long before they saw it smoking.