Question? I have and use a Pro-10 and have a lot of empty ink cartridges. I don’t want to throw them away so is there a place that you know of that will take the cartridges?
@TPD605Күн бұрын
Happy Birthday to your wife!
@jefflecardiet2649Күн бұрын
Hey! My canon pro 1000 slept for 2 years in a box after moving. When I started it again, a error 7400 appeared. Canon told me to buy a new one, cheaper than a reparation plus transport. I was sad. And one day, with no particular reason, it started working again for a few weeks. But now the code error 7400 came back like that. I don’t know why, and don’t know what to do. Did this happen to anyone? What should I do? Thanks, blessing
@Keyboardwarrior42Күн бұрын
Hello Jose! Thank you for the video! May I ask, how can I fit the picture to the paper to get the same borders on the paper with canon's profesional print & layout program?
@mikeleiter12332 күн бұрын
Have a 8550. When i select print the monitor picture shows even boarders. However when i print the picture the top & both sides in the portrait are equal, lets say a 1/4”, the bottom boarder is significantly larger say 1”. Fit to page is enabled. Any thoughts on how to fix. Thanks and love your videos.
@Webrisernl3 күн бұрын
I havent used my pro 100 for 2 years... can I still use it? Do you have any advice how to start using it?
@tashalee42943 күн бұрын
To update, I tried printing my 4x6 from my iPad using the Epson Print Layout Professional Printing app. Printed perfectly.
@ColumbusMediaCo4 күн бұрын
Another Jose video! For anyone in the comments that has done this before what are your thoughts on physically removing the ink cartridges before you move the printer?
@laladamac4 күн бұрын
Thank you
@tashalee42945 күн бұрын
I am having the same issue on the ET 8500. If I print with borders they are uneven. If I print borderless it will stretch the image out so that I am losing the edges of the original image. It may be a windows issue since it is doing the same thing with the pro 10 and ET 8500? There is no difference printing through Adobe Acrobat or Photoshop.
@judychurley66235 күн бұрын
You waste way too much time explaining why you waste so much time. Please we come for inmfo or we would not come at all.
@MrMick5605 күн бұрын
Nice video, I have bought one of these and am setting it up, someone told me yesterday that eco tanks printers are terrible for clogging up, I'm hoping they have got better ?
@Notmy000006 күн бұрын
💙💙💙💙💙💙💙👍👍👍👍👍👍👍👍
@FernandBrunschwig6 күн бұрын
Very helpful - thanks a lot, Jose!
@reallyreallyreallyreally8 күн бұрын
Coincidentally, I was trying to get this to work with an ET-8550. It printed a little off center from a postcard sheet so once I tore them, there was a thicker border on one edge versus another. It was meant to be centered in Epson Print Layout. I can only assume it's because I used rear feed and it just went off alignment a bit.
@JustinWilcott8 күн бұрын
This is useful! Could you do a demo on how to do equal boarders with Canon Pro-100 with Photoshop?
@cheo19496 күн бұрын
Same as what I showed for the PRO-10
@eoslove20228 күн бұрын
Thank you so much José! I could not have figured this out on my own.
@allenbuyck79578 күн бұрын
This sounds familiar 😄😄. Thank you for sharing this info .
@morrisbagnall26908 күн бұрын
Thank you.
@nicedward75448 күн бұрын
Just want to thank you again for motivating me to print my photos after shooting for 20+ years without printing on my own. Only a 8550 but it's a start
@timphelps35688 күн бұрын
As always, very useful information. I own the 8550 and love it. No issues so far. Thanks Jose!
@danalynch88898 күн бұрын
I know this is not a question about above subject but need an answer. I prefer using my Canon chip resetter on my PGI250XL and CLI251 cartridges (non ARC). But I can't find anymore non Arc cartridges, I read people like them but I prefer the resetter. Will the Canon resetter work on ARC chips? Please let me know, thank you.
@bansheblue3129 күн бұрын
Just found my parents’ one from years ago, thank you so much!
@NoName-ul6tg9 күн бұрын
can you buy it in europe
@verofit93059 күн бұрын
Hi Jose, wondering how I can clean my sponges? I do not print borderless but over time sponges have become saturated with ink and they are now staining the back of my larger size prints. Is it just a matter of dabbing the sponges with absorbing paper? I'd love to see a video of how you clean your Pro-1000 sponges including how to move the print head to access all areas. Thank you!
@tedmorgan86309 күн бұрын
Hi Jose. Just wondering if I can regularly print a nozzle check on my Canon Pro9500 to prevent the printer head from clogging if I have nothing to print over a period of time?
@andrewzuchora91179 күн бұрын
hi Jon, in your storage solution formula in the description, is it Glycerol or Methylene Glycol ? Or it doesn't matter and either can be used?
@TurkishGirl5710 күн бұрын
This is great! 👍🏼 I have a few more questions. Are there any acrylic plates specifically designed for sublimation? The products I have looked at only mention that they are made of acrylic material. Should they be coated with polyester? If there are suitable acrylic plates, where can I find them? Alternatively, how can we print images on acrylic materials that are not suitable for sublimation? Thanks in advance.
@WaschyNumber110 күн бұрын
Very nice tip 👌 It's on satin matt paper the same?
@paulmaschak526711 күн бұрын
hi Jose - really appreciate the information you provide, very eye opening on comparing multiple printer outputs. I take it that the Canon Accounting Manger is only working with the Pro 1000 and not older Pro models or maybe I am doing something wrong with my Pro 100 ??
@Amylynnp77711 күн бұрын
What Matt paper do you recommend
@SteadyResolve12 күн бұрын
Videos are great! I need help with my pro 1000. My saturation is not at all what it should be. How can I fix this please?
@FOOKyourFEELINGS13 күн бұрын
Is the first one totally free? Thanks
@cheo194913 күн бұрын
I wish!
@FOOKyourFEELINGS13 күн бұрын
@@cheo1949 What's the price pal?
@topazl959314 күн бұрын
Instead of talking too much, show how to do it !!
@cheo194913 күн бұрын
I can't show you since I am NOT suffering from smears. I would cause problems where none exist. So I have to explain what you can do instead.
@leamonbusinessservices30914 күн бұрын
Hello, I have an Epson ET 2720 - what method do you have for this cleaning? I have a major clog on Cyan. I have tried all kinds of things. I did not use the printer for about 6 months
@cheo194913 күн бұрын
Well, that's the reason. You can not let a printer sit that long. Sorry but cleaning cycles are your only option with this printer.
@d.k.barker946516 күн бұрын
Thanks Jose! What about Brother printers? The best printers I've ever had were Brothers. Did a contract job for a company a while back and needed my own printer so I could use my own laptop without having to sync up to their network. (They were very concerned about security and I was only going to be there for a few months.) Bought a little $89.00 brother. It copied, printed and scanned better than their fancy $20-30,000 machine. Mine was slower of course. The only thing I ever used theirs for was printing on 11x17. I haven't used it in several years, but may try it out using Jose's tricks.
@richardleon458616 күн бұрын
Your knowledge is deeply appreciated, I now understand where I went wrong earlier in this venture. Thank you so much Jose.
@Cliff11716 күн бұрын
What is the average temperature in your room? Where do you live? By the sea or in the mountains? Humidity?
@Gizmopennington17 күн бұрын
I have a Canon Pro 300 that just gave me the waste pads are getting full error. It's currently working but after seeing your video on that subject I know there is nothing to do but toss the printer. I bought the 300 after my Pro 10 gave me the dreaded print head error (can't remember the number now). When I got the 300 it was shipped and arrived broke and I had to send it back and take out the ink and the printhead, so when the replacement arrived I had two printheads! One is currently in the 300 and the other is just in storage. I still have the Pro10 that's been out in the shop for about 3 years now with the ink cartridges still installed! My question is, it there anything I should do to resurrect the Pro 10 other that switching the printhead?
@00freeway2317 күн бұрын
Sometimes I get a white line on the end of the bottom half of the print and I’m not sure why? I already checked the alignment. I’m using this exact printer with the Epson premium photo paper and i only get a short white line at the end of every other photo
@eranabramovich17 күн бұрын
where do i get the Engineers utility for epson ET-4750?
@patrickcarrierephoto18 күн бұрын
Hi Jose. Does this KZread link makes sense to reuse those Maintenance carts ? kzread.info/dash/bejne/o5l7yLuwqq_Mn8o.html
@Lifestyle_clothing64918 күн бұрын
Good afternoon I just brought an epsonx15000 I actually im trying to convert it but i poured out all the sublimation ink which was inside the cartridge now i can’t refill the cartridge, the bag is close Please can someone tell me what to do to fix it !?
@monacocross424118 күн бұрын
need Sublimation papper use too ?
@splatcatTM18 күн бұрын
8 years on and still of value! The Windex trick worked on my ET-8550 :) THANK YOU
@mikehamm00719 күн бұрын
Hello, I just found your channel. I have a question? If printing on transfer paper or transparent paper? What would be a nice printer to go with for quality. Not trying to spend a bunch of money. Mainly making small baseball card size materials. I just know that on my older Epson that uses fluid ink. It did not stick to the transparency paper. But when using a printer that prints from a powder it works fine. I appreciate any feedback from anybody also in the chat. Thanks
@artofwomenphotography19 күн бұрын
yep the live steam starts at midnight here in western australia.
@Abundant-Living20 күн бұрын
After eight years, I am getting back to printing. I have plenty to learn. I purchased the ET8550 from all the positive reviews and the Tank ink costs. Eight years ago, I had an Epson Stylus Pro 3880. It has not been used for eight years and looks brand new. If I may ask a sidebar question, what is the best way to restart the 3880? I know it will use a lot of ink, but I would like to use it until I can purchase the Epson 5370.
@spike829820 күн бұрын
They are the same.
@pharmacist588420 күн бұрын
Use original Epson 114 bottled ink (CMY PB and Grey) (for the ET8550) to refill the XP15000 cartridges, so you will have maximum fade resistance. The red can be approximated with 80% magenta + 20% yellow (I don't see any significant difference after profiling), or use Canon bottled G53 RED ink (Canon Chromalife 100+ fade resistance). Aftermarket ink won't match original inks in terms of fade resistance.
Пікірлер
Question? I have and use a Pro-10 and have a lot of empty ink cartridges. I don’t want to throw them away so is there a place that you know of that will take the cartridges?
Happy Birthday to your wife!
Hey! My canon pro 1000 slept for 2 years in a box after moving. When I started it again, a error 7400 appeared. Canon told me to buy a new one, cheaper than a reparation plus transport. I was sad. And one day, with no particular reason, it started working again for a few weeks. But now the code error 7400 came back like that. I don’t know why, and don’t know what to do. Did this happen to anyone? What should I do? Thanks, blessing
Hello Jose! Thank you for the video! May I ask, how can I fit the picture to the paper to get the same borders on the paper with canon's profesional print & layout program?
Have a 8550. When i select print the monitor picture shows even boarders. However when i print the picture the top & both sides in the portrait are equal, lets say a 1/4”, the bottom boarder is significantly larger say 1”. Fit to page is enabled. Any thoughts on how to fix. Thanks and love your videos.
I havent used my pro 100 for 2 years... can I still use it? Do you have any advice how to start using it?
To update, I tried printing my 4x6 from my iPad using the Epson Print Layout Professional Printing app. Printed perfectly.
Another Jose video! For anyone in the comments that has done this before what are your thoughts on physically removing the ink cartridges before you move the printer?
Thank you
I am having the same issue on the ET 8500. If I print with borders they are uneven. If I print borderless it will stretch the image out so that I am losing the edges of the original image. It may be a windows issue since it is doing the same thing with the pro 10 and ET 8500? There is no difference printing through Adobe Acrobat or Photoshop.
You waste way too much time explaining why you waste so much time. Please we come for inmfo or we would not come at all.
Nice video, I have bought one of these and am setting it up, someone told me yesterday that eco tanks printers are terrible for clogging up, I'm hoping they have got better ?
💙💙💙💙💙💙💙👍👍👍👍👍👍👍👍
Very helpful - thanks a lot, Jose!
Coincidentally, I was trying to get this to work with an ET-8550. It printed a little off center from a postcard sheet so once I tore them, there was a thicker border on one edge versus another. It was meant to be centered in Epson Print Layout. I can only assume it's because I used rear feed and it just went off alignment a bit.
This is useful! Could you do a demo on how to do equal boarders with Canon Pro-100 with Photoshop?
Same as what I showed for the PRO-10
Thank you so much José! I could not have figured this out on my own.
This sounds familiar 😄😄. Thank you for sharing this info .
Thank you.
Just want to thank you again for motivating me to print my photos after shooting for 20+ years without printing on my own. Only a 8550 but it's a start
As always, very useful information. I own the 8550 and love it. No issues so far. Thanks Jose!
I know this is not a question about above subject but need an answer. I prefer using my Canon chip resetter on my PGI250XL and CLI251 cartridges (non ARC). But I can't find anymore non Arc cartridges, I read people like them but I prefer the resetter. Will the Canon resetter work on ARC chips? Please let me know, thank you.
Just found my parents’ one from years ago, thank you so much!
can you buy it in europe
Hi Jose, wondering how I can clean my sponges? I do not print borderless but over time sponges have become saturated with ink and they are now staining the back of my larger size prints. Is it just a matter of dabbing the sponges with absorbing paper? I'd love to see a video of how you clean your Pro-1000 sponges including how to move the print head to access all areas. Thank you!
Hi Jose. Just wondering if I can regularly print a nozzle check on my Canon Pro9500 to prevent the printer head from clogging if I have nothing to print over a period of time?
hi Jon, in your storage solution formula in the description, is it Glycerol or Methylene Glycol ? Or it doesn't matter and either can be used?
This is great! 👍🏼 I have a few more questions. Are there any acrylic plates specifically designed for sublimation? The products I have looked at only mention that they are made of acrylic material. Should they be coated with polyester? If there are suitable acrylic plates, where can I find them? Alternatively, how can we print images on acrylic materials that are not suitable for sublimation? Thanks in advance.
Very nice tip 👌 It's on satin matt paper the same?
hi Jose - really appreciate the information you provide, very eye opening on comparing multiple printer outputs. I take it that the Canon Accounting Manger is only working with the Pro 1000 and not older Pro models or maybe I am doing something wrong with my Pro 100 ??
What Matt paper do you recommend
Videos are great! I need help with my pro 1000. My saturation is not at all what it should be. How can I fix this please?
Is the first one totally free? Thanks
I wish!
@@cheo1949 What's the price pal?
Instead of talking too much, show how to do it !!
I can't show you since I am NOT suffering from smears. I would cause problems where none exist. So I have to explain what you can do instead.
Hello, I have an Epson ET 2720 - what method do you have for this cleaning? I have a major clog on Cyan. I have tried all kinds of things. I did not use the printer for about 6 months
Well, that's the reason. You can not let a printer sit that long. Sorry but cleaning cycles are your only option with this printer.
Thanks Jose! What about Brother printers? The best printers I've ever had were Brothers. Did a contract job for a company a while back and needed my own printer so I could use my own laptop without having to sync up to their network. (They were very concerned about security and I was only going to be there for a few months.) Bought a little $89.00 brother. It copied, printed and scanned better than their fancy $20-30,000 machine. Mine was slower of course. The only thing I ever used theirs for was printing on 11x17. I haven't used it in several years, but may try it out using Jose's tricks.
Your knowledge is deeply appreciated, I now understand where I went wrong earlier in this venture. Thank you so much Jose.
What is the average temperature in your room? Where do you live? By the sea or in the mountains? Humidity?
I have a Canon Pro 300 that just gave me the waste pads are getting full error. It's currently working but after seeing your video on that subject I know there is nothing to do but toss the printer. I bought the 300 after my Pro 10 gave me the dreaded print head error (can't remember the number now). When I got the 300 it was shipped and arrived broke and I had to send it back and take out the ink and the printhead, so when the replacement arrived I had two printheads! One is currently in the 300 and the other is just in storage. I still have the Pro10 that's been out in the shop for about 3 years now with the ink cartridges still installed! My question is, it there anything I should do to resurrect the Pro 10 other that switching the printhead?
Sometimes I get a white line on the end of the bottom half of the print and I’m not sure why? I already checked the alignment. I’m using this exact printer with the Epson premium photo paper and i only get a short white line at the end of every other photo
where do i get the Engineers utility for epson ET-4750?
Hi Jose. Does this KZread link makes sense to reuse those Maintenance carts ? kzread.info/dash/bejne/o5l7yLuwqq_Mn8o.html
Good afternoon I just brought an epsonx15000 I actually im trying to convert it but i poured out all the sublimation ink which was inside the cartridge now i can’t refill the cartridge, the bag is close Please can someone tell me what to do to fix it !?
need Sublimation papper use too ?
8 years on and still of value! The Windex trick worked on my ET-8550 :) THANK YOU
Hello, I just found your channel. I have a question? If printing on transfer paper or transparent paper? What would be a nice printer to go with for quality. Not trying to spend a bunch of money. Mainly making small baseball card size materials. I just know that on my older Epson that uses fluid ink. It did not stick to the transparency paper. But when using a printer that prints from a powder it works fine. I appreciate any feedback from anybody also in the chat. Thanks
yep the live steam starts at midnight here in western australia.
After eight years, I am getting back to printing. I have plenty to learn. I purchased the ET8550 from all the positive reviews and the Tank ink costs. Eight years ago, I had an Epson Stylus Pro 3880. It has not been used for eight years and looks brand new. If I may ask a sidebar question, what is the best way to restart the 3880? I know it will use a lot of ink, but I would like to use it until I can purchase the Epson 5370.
They are the same.
Use original Epson 114 bottled ink (CMY PB and Grey) (for the ET8550) to refill the XP15000 cartridges, so you will have maximum fade resistance. The red can be approximated with 80% magenta + 20% yellow (I don't see any significant difference after profiling), or use Canon bottled G53 RED ink (Canon Chromalife 100+ fade resistance). Aftermarket ink won't match original inks in terms of fade resistance.