I hate the stupid latch on these boxes... Like why when it is unlocked do I have to still have to pull a lever to open the drawer??? I'd rather spend the money on a used Vidmar 3x the price of these drawers.
@EzTechJoe5 сағат бұрын
Yeah that's understandable
@tylerhoopes8 сағат бұрын
I LOVE MY SERIES 3!!!!! And I got it clearance due to damage. It sits in one spot. Correct. I cannot wait to add on to my box!!!! 💚🤙 #RVtech
@gtp11728 сағат бұрын
it holds tools. why pay more. that blue is awesome
@gregblau80829 сағат бұрын
I wouldn't worry about the quality at all. Even if it only lasts a few years you can get another one and still be up financially. I just wish they were deeper (front to back)
@EzTechJoe8 сағат бұрын
Definitely
@kodakboi759 сағат бұрын
Boy I tell u that ICON box 😍make me sweat lol
@EzTechJoe8 сағат бұрын
It's nice!
@charlespaluha12479 сағат бұрын
Let's see what happens after I put over 600 lb of sockets in that top drawer.😂😂😂. But yeah then again I've been doing this for coming up on 20 years
@allphasestech10 сағат бұрын
I've got 3 of the 5 drawer carts and they'll do the job. That being said, if I can't load my box on my truck by myself, it ain't the one for me 😂😂😂 Those are dope though.
@EzTechJoe9 сағат бұрын
🤣
@jeremysuit695718 сағат бұрын
I've got the dcf900 I love it but I'm saving up for the dcf961 ½ impact kit. I currently own 3 dewalt impacts two ½ an one ⅜
@MrSpike0358Күн бұрын
amazing, my Tekton does wonderful for the win!
@Bloodsong08302 күн бұрын
You can buy new cases for the batterys too, I know besides the point
@Bloodsong08302 күн бұрын
I keep breaking my Milwaukee batterys and Holly fuck it's annoying
@davntelisha192 күн бұрын
Just went today bought power washer and socket set keep stacking tools
@Gettin_To_It_Tech2 күн бұрын
I got the 27inch. Black nickel 1/2 drive one. I love their ratchets
@EzTechJoe2 күн бұрын
That might be the best one that I get!
@Gettin_To_It_Tech9 сағат бұрын
@@EzTechJoe yea it’s real nice. So nice I dnt b wanting to use it 😂😁
@EzTechJoe9 сағат бұрын
@Gettin_To_It_Tech I was like like that with my black nickel ratchet... but bow I use it mostly lol
@Gettin_To_It_Tech9 сағат бұрын
@@EzTechJoe I never used my nickel teal handle ratchet yet I had it for like almost 2 months
@huasohvac2 күн бұрын
Make sure you give it that hawk tuah and spit on that thang before you give it back
@EzTechJoe2 күн бұрын
🤣🤣🤣🤣🤦🏾
@jab55212 күн бұрын
Never needed a t70 or larger. What are you working on????
@EzTechJoe2 күн бұрын
I'm a semi truck mechanic. I don't necessarily need it. I was just making a point of the difference in tools
@sebastianibarra46932 күн бұрын
it’s not worth the harbor freight power tools, a milwaukee high torque is 220 on amazon rn so for $20 more it’s something that’s gonna last you years
@EzTechJoe2 күн бұрын
If I was comparing different brands that would be the case but this was strictly just Habor Freight brands
@Nordman5552 күн бұрын
Where you can save money: impact and chrome sockets. Toolbox. Powertools. Picks and scrapers.
@victorhoyt43522 күн бұрын
Dang, your harbor freight is hella empty. They need to tighten up!!
@EzTechJoe2 күн бұрын
Yeah its actually 2 in the city.. this one is like the step child or something
@FAMOUSSLICKRICK2 күн бұрын
Hey I thought you said you liked and was the best 3/8 drive ratchet you have was the new model locking flex head Gearwrench 120XP 15.5 inch long ratchet? LOL!!! 🤣😂 Now how does it compare to your new Matco ratchet?
@EzTechJoe2 күн бұрын
Hey whata up man. Yeah the gearwrench is my most used but they both are going to get there share of use. Can't really compare the 2 yet!
@FAMOUSSLICKRICK5 сағат бұрын
@@EzTechJoe I know exactly what you mean my friend. I They are both beautiful and strong 💪 ratchets. 🇺🇸
@kodakboi752 күн бұрын
Bro i really appreciate your content especially showing tools I have independent tool truck guy that’s sells the sunex and ect brands u have that are good and good prices and ur advice is good !!! Don’t stop EZ TECH !!!
@EzTechJoe2 күн бұрын
Thanks man I appreciate that! Glad I can help in some kind of a way!
@kodakboi752 күн бұрын
@@EzTechJoehave a question thoe what are you mostly using SAE or metric on the trucks
@EzTechJoe2 күн бұрын
@kodakboi75 about 95% metric. I work on Volvo and Macks mostly. But even with freightliner, too. I'd need SAE every now and again, so it's good to have it when you need it.
@kodakboi75Күн бұрын
@@EzTechJoeok thanks so much
@allphasestech2 күн бұрын
I stay rocking with the Pittsburgh dead blow hammers because they're kind of a high wear item for me. Basically disposables. One of the roller chairs would be nice and a padded creeper would be an upgrade to my Jeeper Creeper haha Appreciate the video 💯
@EzTechJoe2 күн бұрын
Thanks man!!! And yeah I definitely might need to upgrade my creeper to
@stsautodesigntools2 күн бұрын
I have those red flush cutters, i love them😅
@EzTechJoe2 күн бұрын
Lol. Aye man Amazon come in clutch
@stsautodesigntools2 күн бұрын
@@EzTechJoe yeah i have had no issues with them
@Chilly-uq2zl2 күн бұрын
I saw a side by side video on a small guys page and they compared a grip edge torx bit to a mac rbrt torx and yes they are very similar but were still different! I couodnt believe what i was seeing!
@chemmer11272 күн бұрын
How often do you use a 1/2 drive 10mm impact socket?
@EzTechJoe2 күн бұрын
Not at all lol
@travlite84962 күн бұрын
Heres a reminder a toolbox doesn't make you money never has never will buy Harbor all day long spend your money on tools that make your job quicker and easier.
@EzTechJoe2 күн бұрын
I agree with that
@travlite84962 күн бұрын
@@EzTechJoe Thank you sir I just want the younger kids to get motivated because were losing the trade that gave me an awesome life,you don't need that snap on tool these days you can buy 5 to their one that does the same thing and remember they have a life time warranty also so don't go in debt there's no need for it. Take a trade you won't regret it!
@travlite84962 күн бұрын
I'm a Body Man---painter I stared buying snap on 30 years ago need less to say i went 10 grand in debt! Fast forward if i need a good tool Harbor Freight is where I go... Any new techs listen don't go in debt for a name trust me you will thank me later...
@hachi-rokuperformancegroup39873 күн бұрын
Tool boxes, carts and jacks used to be the only things truly worth the money but their prices have shot way up
@EzTechJoe3 күн бұрын
Just like everything else In the world we live in
@hachi-rokuperformancegroup39873 күн бұрын
@EzTechJoe yes but they have priced themselves out of the market. There normal cheap stuff is higher than home depot and lowes and their icon is higher than better quality brand. All the attention they got on youtube has gave them a big head and they are over priced and same quality. I used to buy one time use items or things I wouldn't use much but now I just go somewhere else to get better quality for cheaper everywhere else
@TheApprenticeToJourneyman3 күн бұрын
Come On Now Dawg..😂 Good video as always Brother!👍🏽
@EzTechJoe3 күн бұрын
🤣. Appreciate it man
@stsautodesigntools3 күн бұрын
We love this🎉🎉
@EzTechJoe3 күн бұрын
🔥🔥🔥
@inthedarkwoods20223 күн бұрын
youtube channel torquetest showed it hits around 560 pounds.. It's legit and a good one to use
@jacobstacy5883 күн бұрын
I always lose a 12mm and a 14mm and I use the hell out of a 10mm but never lost one I work on a lot of Honda Toyota and Nissan so 12mm 14mm 17mm 19mm and 21mm are used a lot
@castillorollins28593 күн бұрын
Joe, I bought the 58” pry bar last week with the icon coupon. Seems to be a pretty good pry bar. I used it prying on the back guard of my bushhog
@EzTechJoe3 күн бұрын
Yeah I might get it one day for the heck of yet!
@scottaddison80713 күн бұрын
Save your money and buy the best tools you can afford
@EzTechJoe3 күн бұрын
Agreed
@airmobiledivision77592 күн бұрын
I think that’s Harbor Freight for a lot of people, unfortunately.
@OneManOnFire4 күн бұрын
I have exact box i got it used on FB marketplace. The ad showed 60 people saved it with tons of people looking at it. The seller wanted $900. I offered full amount price under the condition that everything works and they have keys. When it comes to boxes like this i don't haggle when it's a good deal. I never saw a used one at that price range again.
@EzTechJoe4 күн бұрын
A dang man that's fire!!
@austinsmith37504 күн бұрын
Where do I get them dewalt rubber protectors
@EzTechJoe4 күн бұрын
I got mines from my Mac Tools Dealer.. Boot for Dcf891: PB891-92B Boot for DCF923 or 921: PB921-22-23B They are also online if you can find them somewhere if you're lucky. For whatever reason Dewalt makes it hard to get.
@kickazz12244 күн бұрын
Thet are ratchets not wrenches
@FernandoRamos-xx3kr4 күн бұрын
Mac tools rbrt go up to t100 …
@benjaminabel85964 күн бұрын
Where did you get the cover for the dewalt impact gun?
@EzTechJoe4 күн бұрын
I got mines from my Mac Tools Dealer.. Boot for Dcf891: PB891-92B Boot for DCF923 or 921: PB921-22-23B They are also online if you can find them somewhere if you're lucky. For whatever reason Dewalt makes it hard to get.
@nvragn2 күн бұрын
I was going to jump on and say that I got mine from my Mac dlr. I guess that I'm just a bit late. Anyway while I'm here I should mention that I like your setup 👍🇨🇦🔧
@EzTechJoe2 күн бұрын
@@nvragn thanks I appreciate it!
@nvragn2 күн бұрын
@@EzTechJoe ya no worries I just stumbled across your channel and looking forward to checking it out. I appreciate the response 👍. I will definitely see you in the comment section 👍 🇨🇦 🔧
@EzTechJoe2 күн бұрын
@nvragn no doubt man! And hope you enjoy the content. I'm always here 💯
@cesare82704 күн бұрын
Awesome thanks man!
@DON_TOOLS4 күн бұрын
Got the matco opti grip star set. Ordered the rbrt t80,t90,t100 from my mac dealer. Called it a day 💯
@EzTechJoe4 күн бұрын
That's exactly my plans
@DON_TOOLS4 күн бұрын
Got a 10 ,12-1/2 ,15-1/2 and 18-1/2 3/8th soft grip locking flex head ratchets with the 30% off deal they had going 💯
@EzTechJoe4 күн бұрын
Sheeeshhh 🔥🔥🔥
@DON_TOOLS4 күн бұрын
@@EzTechJoe will make a short video on them soon 🤙
@EzTechJoe4 күн бұрын
@DON_TOOLS aw man let me go sub ! 💯🙌🏾
@jesuslemus16684 күн бұрын
Need that bro good look
@allphasestech4 күн бұрын
💯
@ryanmusante4 күн бұрын
Do u know if that classic 55 is 24” deep? Im bout to get mine delivered Monday morning and just tryna see how mines gonna lay out kinda
@EzTechJoe4 күн бұрын
Yupp the classics are 24" deep if I remember correctly.
@fester19574 күн бұрын
😊 Snap-On is 250
@AndyCrumbaker5 күн бұрын
I’m thinking about instead of the 5 drawer USG 30”, getting the 34” 6 drawer full bank USG. I don’t really need either one of them, I’ve already got a 42” roll cab and top chest combo and a 56” roll cab and top chest combo, but I kinda want one.
@EzTechJoe5 күн бұрын
It will just give you an excuse to buy more tools to fill up the space lol
@AndyCrumbaker5 күн бұрын
@@EzTechJoe haha I don’t need that excuse, both those boxes are full and an old 26” craftsman top and better I have off to the side is full. It’s a problem really
Пікірлер
No stubbys ?
We buy bigger toolboxes because we want it.
I hate the stupid latch on these boxes... Like why when it is unlocked do I have to still have to pull a lever to open the drawer??? I'd rather spend the money on a used Vidmar 3x the price of these drawers.
Yeah that's understandable
I LOVE MY SERIES 3!!!!! And I got it clearance due to damage. It sits in one spot. Correct. I cannot wait to add on to my box!!!! 💚🤙 #RVtech
it holds tools. why pay more. that blue is awesome
I wouldn't worry about the quality at all. Even if it only lasts a few years you can get another one and still be up financially. I just wish they were deeper (front to back)
Definitely
Boy I tell u that ICON box 😍make me sweat lol
It's nice!
Let's see what happens after I put over 600 lb of sockets in that top drawer.😂😂😂. But yeah then again I've been doing this for coming up on 20 years
I've got 3 of the 5 drawer carts and they'll do the job. That being said, if I can't load my box on my truck by myself, it ain't the one for me 😂😂😂 Those are dope though.
🤣
I've got the dcf900 I love it but I'm saving up for the dcf961 ½ impact kit. I currently own 3 dewalt impacts two ½ an one ⅜
amazing, my Tekton does wonderful for the win!
You can buy new cases for the batterys too, I know besides the point
I keep breaking my Milwaukee batterys and Holly fuck it's annoying
Just went today bought power washer and socket set keep stacking tools
I got the 27inch. Black nickel 1/2 drive one. I love their ratchets
That might be the best one that I get!
@@EzTechJoe yea it’s real nice. So nice I dnt b wanting to use it 😂😁
@Gettin_To_It_Tech I was like like that with my black nickel ratchet... but bow I use it mostly lol
@@EzTechJoe I never used my nickel teal handle ratchet yet I had it for like almost 2 months
Make sure you give it that hawk tuah and spit on that thang before you give it back
🤣🤣🤣🤣🤦🏾
Never needed a t70 or larger. What are you working on????
I'm a semi truck mechanic. I don't necessarily need it. I was just making a point of the difference in tools
it’s not worth the harbor freight power tools, a milwaukee high torque is 220 on amazon rn so for $20 more it’s something that’s gonna last you years
If I was comparing different brands that would be the case but this was strictly just Habor Freight brands
Where you can save money: impact and chrome sockets. Toolbox. Powertools. Picks and scrapers.
Dang, your harbor freight is hella empty. They need to tighten up!!
Yeah its actually 2 in the city.. this one is like the step child or something
Hey I thought you said you liked and was the best 3/8 drive ratchet you have was the new model locking flex head Gearwrench 120XP 15.5 inch long ratchet? LOL!!! 🤣😂 Now how does it compare to your new Matco ratchet?
Hey whata up man. Yeah the gearwrench is my most used but they both are going to get there share of use. Can't really compare the 2 yet!
@@EzTechJoe I know exactly what you mean my friend. I They are both beautiful and strong 💪 ratchets. 🇺🇸
Bro i really appreciate your content especially showing tools I have independent tool truck guy that’s sells the sunex and ect brands u have that are good and good prices and ur advice is good !!! Don’t stop EZ TECH !!!
Thanks man I appreciate that! Glad I can help in some kind of a way!
@@EzTechJoehave a question thoe what are you mostly using SAE or metric on the trucks
@kodakboi75 about 95% metric. I work on Volvo and Macks mostly. But even with freightliner, too. I'd need SAE every now and again, so it's good to have it when you need it.
@@EzTechJoeok thanks so much
I stay rocking with the Pittsburgh dead blow hammers because they're kind of a high wear item for me. Basically disposables. One of the roller chairs would be nice and a padded creeper would be an upgrade to my Jeeper Creeper haha Appreciate the video 💯
Thanks man!!! And yeah I definitely might need to upgrade my creeper to
I have those red flush cutters, i love them😅
Lol. Aye man Amazon come in clutch
@@EzTechJoe yeah i have had no issues with them
I saw a side by side video on a small guys page and they compared a grip edge torx bit to a mac rbrt torx and yes they are very similar but were still different! I couodnt believe what i was seeing!
How often do you use a 1/2 drive 10mm impact socket?
Not at all lol
Heres a reminder a toolbox doesn't make you money never has never will buy Harbor all day long spend your money on tools that make your job quicker and easier.
I agree with that
@@EzTechJoe Thank you sir I just want the younger kids to get motivated because were losing the trade that gave me an awesome life,you don't need that snap on tool these days you can buy 5 to their one that does the same thing and remember they have a life time warranty also so don't go in debt there's no need for it. Take a trade you won't regret it!
I'm a Body Man---painter I stared buying snap on 30 years ago need less to say i went 10 grand in debt! Fast forward if i need a good tool Harbor Freight is where I go... Any new techs listen don't go in debt for a name trust me you will thank me later...
Tool boxes, carts and jacks used to be the only things truly worth the money but their prices have shot way up
Just like everything else In the world we live in
@EzTechJoe yes but they have priced themselves out of the market. There normal cheap stuff is higher than home depot and lowes and their icon is higher than better quality brand. All the attention they got on youtube has gave them a big head and they are over priced and same quality. I used to buy one time use items or things I wouldn't use much but now I just go somewhere else to get better quality for cheaper everywhere else
Come On Now Dawg..😂 Good video as always Brother!👍🏽
🤣. Appreciate it man
We love this🎉🎉
🔥🔥🔥
youtube channel torquetest showed it hits around 560 pounds.. It's legit and a good one to use
I always lose a 12mm and a 14mm and I use the hell out of a 10mm but never lost one I work on a lot of Honda Toyota and Nissan so 12mm 14mm 17mm 19mm and 21mm are used a lot
Joe, I bought the 58” pry bar last week with the icon coupon. Seems to be a pretty good pry bar. I used it prying on the back guard of my bushhog
Yeah I might get it one day for the heck of yet!
Save your money and buy the best tools you can afford
Agreed
I think that’s Harbor Freight for a lot of people, unfortunately.
I have exact box i got it used on FB marketplace. The ad showed 60 people saved it with tons of people looking at it. The seller wanted $900. I offered full amount price under the condition that everything works and they have keys. When it comes to boxes like this i don't haggle when it's a good deal. I never saw a used one at that price range again.
A dang man that's fire!!
Where do I get them dewalt rubber protectors
I got mines from my Mac Tools Dealer.. Boot for Dcf891: PB891-92B Boot for DCF923 or 921: PB921-22-23B They are also online if you can find them somewhere if you're lucky. For whatever reason Dewalt makes it hard to get.
Thet are ratchets not wrenches
Mac tools rbrt go up to t100 …
Where did you get the cover for the dewalt impact gun?
I got mines from my Mac Tools Dealer.. Boot for Dcf891: PB891-92B Boot for DCF923 or 921: PB921-22-23B They are also online if you can find them somewhere if you're lucky. For whatever reason Dewalt makes it hard to get.
I was going to jump on and say that I got mine from my Mac dlr. I guess that I'm just a bit late. Anyway while I'm here I should mention that I like your setup 👍🇨🇦🔧
@@nvragn thanks I appreciate it!
@@EzTechJoe ya no worries I just stumbled across your channel and looking forward to checking it out. I appreciate the response 👍. I will definitely see you in the comment section 👍 🇨🇦 🔧
@nvragn no doubt man! And hope you enjoy the content. I'm always here 💯
Awesome thanks man!
Got the matco opti grip star set. Ordered the rbrt t80,t90,t100 from my mac dealer. Called it a day 💯
That's exactly my plans
Got a 10 ,12-1/2 ,15-1/2 and 18-1/2 3/8th soft grip locking flex head ratchets with the 30% off deal they had going 💯
Sheeeshhh 🔥🔥🔥
@@EzTechJoe will make a short video on them soon 🤙
@DON_TOOLS aw man let me go sub ! 💯🙌🏾
Need that bro good look
💯
Do u know if that classic 55 is 24” deep? Im bout to get mine delivered Monday morning and just tryna see how mines gonna lay out kinda
Yupp the classics are 24" deep if I remember correctly.
😊 Snap-On is 250
I’m thinking about instead of the 5 drawer USG 30”, getting the 34” 6 drawer full bank USG. I don’t really need either one of them, I’ve already got a 42” roll cab and top chest combo and a 56” roll cab and top chest combo, but I kinda want one.
It will just give you an excuse to buy more tools to fill up the space lol
@@EzTechJoe haha I don’t need that excuse, both those boxes are full and an old 26” craftsman top and better I have off to the side is full. It’s a problem really
Nice setup.
Appreciate it💯