My Loaded Toolbox Tour As A 3rd Year Diesel Mechanic And Tool Addict!
#toolbox #tools #snapon
A full toolbox tour of my new Sunex Service Cart and My Mac Tools 42-inch toolbox. A mixture of tools from Snap-on, Matco, Mac Tools, Harbor Freight, and more! After 3 years in the field, a lot of you have asked for an update on my toolboxes. Hope you guys enjoy it!
The Sunex Service Cart Sales for around $1000!
Magnetic Power Tool Boots:
(Discount Code - " EZTECH ")
www.stsautodesign.com/
QRT ORGANIZERS:
(Discount Code - " EZTECHJOE10 ")
7dffcb-f2.myshopify.com/?ref=...
OTHER TOOL LINKS: linktr.ee/eztechjoe
EMAIL INQUIRY: Eztechjoe@gmail.com
Пікірлер: 91
You could always use a Christmas tree step bit and drill a hole at the bottom of the cart so your 36 inch long pry bar will fit in the box and close the lid and then use some rubber heater hose, radiator hose,or some sort of grommet on the hole you drilled out
@clinte14
3 күн бұрын
Yes I did this with my Homak roll cart 😊
@EzTechJoe
3 күн бұрын
I've been considering it
Drill a hole in the bottom for that biggazz prybar! Stick a rubber grommet in there and it'll look factory👍 Nice setup man, solid choices!
@EzTechJoe
3 күн бұрын
🤔🤔.. that might just work. Appreciate it man
@cesare8270
2 күн бұрын
@@EzTechJoe We just loop a zip tie loosely around the handles of our tool boxes and use that as a holder for the larger pry bars.
@EzTechJoe
2 күн бұрын
@@cesare8270 ohh that's innovative
Craftsman v series,facom and Mac precision torque and knuckle savers i would love to eventually acquire a set of the Mac precision torque wrench sets
Nice video! That Expert brand stuff from Mac is really a good deal. Im blessed to have a good Mac guy and I buy quite a bit of the Expert stuff.
@EzTechJoe
6 күн бұрын
Same here!. It's all about the dealer for me!
You can buy new cases for the batterys too, I know besides the point
Looks like you've about got it covered! Good introduction for me to your channel. Thanks for the video. 💯
@EzTechJoe
6 күн бұрын
Hey thanks man!! Much love!
This is my ASMR. Much appreciated
I don’t care what you mama says 😂😂😂😂😂 love the videos bro 💪🏼
@EzTechJoe
6 күн бұрын
Lol. Appreciate that man!
I bought a sunex 1120 ss 20pc black with red comfort grip handle screwdriver set with tray from Amazon like $65
Awesome tour bro!! I just got that us general cart around same time as u, now i wanna upgrade to a bigger cart😂
@EzTechJoe
7 күн бұрын
🤣🤣🤣🤣🤣🤣. Mannn it be exactly like that bro
Awesome tool box tour brother! Thanks for sharing! Definitely better set up on this service cart than the 5 drawer cart for sure 👍🏼💯💯💯
@EzTechJoe
7 күн бұрын
Thank my man!!
@vig37
6 күн бұрын
@@EzTechJoe yeah man, that roll cart is nice. So is your big box, but I like that roll cart setup because it's more affordable.
1 of my Dewalt 12v batteries did that same thing but not as bad as yours, it still works and will pop back in enough to use it and not pop out really. I cant complain though, Ive got a good 5 years heavy use out of it..
I got the 14.4 stuff I have everything they make and man it was expensive getting there but I love how the batteries are ,style the way it clips in everything 😊
@EzTechJoe
6 күн бұрын
Yeah those batteries are hard to get out. They snap on really tough
Nice box, but wanna say Thanx. Been waiting for u to do a tour, and for some crazy reason I'm addicted to box reviews n tool reviews. I'm guessing its 2 see what I need to add to my inventory. I'm still waiting to pull the trigger on a box n Sunex is in the running.
@EzTechJoe
7 күн бұрын
Aw man that great man and thank you as well! Same here. I have a entire checklist from watching other toolbox tours
I have the Thinkwork extractor sockets. They work great.
Nice! Come a long way since your first upload. The dewalt battery, you might be able to find a replacement clamshell for relatively cheap
@EzTechJoe
7 күн бұрын
Yes man thank you! And I think I'm going to try that to. My Mac tools dealer brought that up as well
Nice setup.
@EzTechJoe
3 күн бұрын
Appreciate it💯
Big dawg done came up 💯
@EzTechJoe
7 күн бұрын
Man🙌🏾 appreciate it bro!
Love ur videos
@EzTechJoe
7 күн бұрын
Appreciate that!
That’s nice that Empire provides that beautiful MAC Edge toolbox for you
@EzTechJoe
7 күн бұрын
Oh no I don't work at Empire lol
@scottaddison8071
7 күн бұрын
That looks like an Empire shop
@jamesridley1437
7 күн бұрын
I was thinking the same thing
@scottaddison8071
7 күн бұрын
@@EzTechJoe are you in Mississippi, Alabama or Louisiana?
Great setup! Thanks for the vid. Edit: can you pop the astro nano's into any 19mil (assuming they're 19mil?)or is it proprietary to their stuff only?
@EzTechJoe
7 күн бұрын
🙌🏾🙌🏾
got the same sunex box and loving it so far a lot better quality than harbor freight like that it has the handle detents for the slides sense my shop isnt level nice setupp thoo
It’s a good idea/ best practice.. to keep the batteries ‘out’ of the snap on tech angle torque wrench , when you are not using it ! 🛠️🤙🏼
@EzTechJoe
7 күн бұрын
Yeah, i do sometimes. Other times, I just leave them in. I'm going to eventually get rechargeable batteries for it
@TheRealBSi1
7 күн бұрын
It’s not about the batteries going dead .. it’s about preventing corrosion inside the body of the torque wrench. To prevent premature wear of the contact points inside the wrench!
@EzTechJoe
7 күн бұрын
@@TheRealBSi1 oh that's good to know!
@JSTruckRepair
7 күн бұрын
I’ve had my digital torque wrenches since 2018 and I’ve only used energizer batteries and replace them once they are on 1 bar of life left. Never once in 6 years have I had an issue leaving batteries in. But I assume if you use junk batteries or don’t use it enough to replace the batteries fairly often corrosion can happen. But in all seriousness if you have a new torque wrench that’s still in its warranty if there’s bad corrosion inside the battery compartment snap on will void your warranty fix
@vig37
7 күн бұрын
My original batteries are still in my two 1/2 and 3/8 Snap-On Techangle torque wrenches. The half was bought in 2014 and the 3/8 was from 2016. I always take them out. I've seen electronics where great name brand batteries leaked. I'm not taking a chance. This is what I do and best practice is best practice. But, by all means It's your money, do what you want.
I’m thinking about instead of the 5 drawer USG 30”, getting the 34” 6 drawer full bank USG. I don’t really need either one of them, I’ve already got a 42” roll cab and top chest combo and a 56” roll cab and top chest combo, but I kinda want one.
@EzTechJoe
3 күн бұрын
It will just give you an excuse to buy more tools to fill up the space lol
@AndyCrumbaker
3 күн бұрын
@@EzTechJoe haha I don’t need that excuse, both those boxes are full and an old 26” craftsman top and better I have off to the side is full. It’s a problem really
Get some crazy glue on the 12v. For the price i believe dewalt ratchets are the best.
Think my only issue with the sunex tool cart it’s a bit pricey for not being a truck brand box
How are the pittsburgh locking extension holding up?
@EzTechJoe
6 күн бұрын
They never gave me any problems man. If I upgrade it's because I want to, not have to
Is that sunnex cart nice and level? Wondering been thinking on buying a cart.
@EzTechJoe
6 күн бұрын
Yes it is. Haven't given me any problems as of yet
I tried ordering that cart a couple times, but they kept being cancelled as back ordered, so I paid a little more for one that says matco. The only thing I don't like is how it wanders when you push it.
@EzTechJoe
7 күн бұрын
Yeah that's true the boxes are a little tougher to get a hold of a little bit. At least these particular ones. The green and orange tool carts have been a limited time order. I think they brought it back 2 or 3 times
🔥🔥
Awesome where can I buy this sunex cart ?
@EzTechJoe
6 күн бұрын
The green and orange versions of these carts are limited time only, supposedly, but they do bring them back often.. You can find them and their regular black and red versions on Summit Racing, JEGS, and Paul's Tools. And I hear they should be at ACME Tools soon as well.
Snap on does not warranty batteries.
@EzTechJoe
7 күн бұрын
And It's only a 1 year warranty as well 🤦🏾
I keep breaking my Milwaukee batterys and Holly fuck it's annoying
I could never keep my toolbox open and unlocked😂 never trust those salesmen
@EzTechJoe
7 күн бұрын
🤣🤣
Joe said, these are ass, don't buy these lmfao
@EzTechJoe
7 күн бұрын
Lol. Have to call it like I see it
That's what a true mechanic's tool cart supposed to look like. Sockets on top along with an impact gun, Not like some other ppl having only sockets on top and all ratchet & impacts some other places
@Nordman555
7 күн бұрын
Yah ok...
@victorhoyt4352
6 күн бұрын
What does that even mean? How does a "true mechanic" have all the sockets up top, but a non true mechanic have impacts somewhere else? If you have all your sockets up top, how do you have impacts somewhere else? Sockets and impacts are the same thing... You either have all your sockets up top or you don't. If you have all your sockets up top, then you have your impacts up top too. There's no such thing as a real mechanic organized box. Each mechanic has their own style and their own way of organizing.
@hometownfishball7239
6 күн бұрын
@@victorhoyt4352 I said sockets and impact guns, not sockets and impacts......I have seen people having only sockets on top and their impact guns at the very bottom drawer and their ratchets in some other drawers. In real mechanic life, for efficiency, when you grab a socket, you will grab an impact gun or ratchet as well No?? What s the point of grabbing a socket on the very top then bend down to the very bottom drawer to grab the impact gun???
@victorhoyt4352
6 күн бұрын
@@hometownfishball7239 re read your comment bro. It definitely says sockets and impacts. Not impact guns. Btw, they are called impact wrenches and impact drivers. Not impact guns. A "real mechanic" wouldn't call them impact guns... Also, if you watched his video, you would have seen his bottom drawer slap full of power tools. So I guess he's not a "real mechanic?"
@hometownfishball7239
6 күн бұрын
@@victorhoyt4352 My comment here is only to show appreciation to this youtuber. not to go through every single word with anyone else. If you dont understand, it s ok
Hey brother I thought you were a fleet tech
@EzTechJoe
7 күн бұрын
I left that fleet and they closed down shortly after.
@sergiovelasco2844
7 күн бұрын
Oh got it so did you go back to your old dealership?
@EzTechJoe
7 күн бұрын
@sergiovelasco2844 no I didn't. To A different one.
Those matco pliers are rebranded HF..... you woulda been better off buying hf!
@EzTechJoe
5 күн бұрын
Nahh i didn't want to. But yes I known that that is a possibility
Buy milwaukee
@EzTechJoe
3 күн бұрын
It was a thought
Hole saw that bottom frame out.