Пікірлер

• 
  @sebastianusami13 күн бұрын

  iv been fighting for hours with mine, cant get it to pull the thread

• 
  @joeyyarachno28 күн бұрын

  Thank you for your video. But if I may ask: Sometimes when my machine seems like it’s aligned, I could stitch my project a few stitches, and then out of nowhere it seems like my needle gets stuck or “hits” something as it goes into the shuttle and I end up breaking my needle. Do you know what that could be??

• 
  @kachifung4086Ай бұрын

  西廣場內應有1個高滑梯😅

• 
  @paoloumali100Ай бұрын

  Is there issue using 2200mah * 4?

• 
  @kslam5733Ай бұрын

  Up to now, the power bank is still working. As it is a first generation power bank, it charges quite slowly for full 10400 mAh capacity.

• 
  @SHANTUBE7862 ай бұрын

  Have you tried the new removable lens guard that insta360 released? It looks like it solved all the problems with less sealing it might vent better

• 
  @kslam57332 ай бұрын

  I haven't tried. I do think that fogging is still a problem even with this lens guard. The heat generated inside the lens guard still has no way out but can be solved by removing the guard when it happens.

• 
  @SHANTUBE7862 ай бұрын

  @kslam5733 I thought you might say that ,lol. Hence I'm going for the removable ones. And yes, there is an x3 removable ones that recently came out. It's on the official insta360 store. I'm getting that for convenience and use anti fog spray from time to time

• 
  @kslam57332 ай бұрын

  The new guard is not sealed tightly as the old one. There may be space for heat coming out but may not be wide enough. Still worth trying because it is removable!

• 
  @kamchichoi7922 ай бұрын

  我讀潔心的

• 
  @kslam57332 ай бұрын

  謝謝觀看，這動畫能否把往日潔心及四圍的環境重現呢？有什麽需要添加？日後會修訂，再上載。

• 
  @kachifung4086Ай бұрын

  那年畢業？

• 
  @kachifung4086Ай бұрын

  西廣場應有一高滑梯

• 
  @jasonkwc3 ай бұрын

  what if you encounter raining day?

• 
  @kslam57333 ай бұрын

  Think about even without this lens guard, rain would still drop on the oval glass and would affect the photos taken. There is no difference whether with or without this vented lens guard. So taking pictures in rainy days is troublesome to not only X3 but all cameras! The concerns are around how to dry out the water sipping in through the 4 vents. If rain is not heavy, rain would not easily get in the lens guard through the small vents. If it rains heavily, rain may sip in through the vents. Simply shake the water out from inside the lens guard first; use air blower to dry it if available; If necessary, may take away the lens guard easily since there are only 4 small pads adhered. Reinstall it is also easy just with the adhesive tape.

• 
  @jasonkwc3 ай бұрын

  @@kslam5733 I'm concerned with this method as I'm filming while riding motorcycle. This afraid dust get in and scratch the main lens

• 
  @kslam57333 ай бұрын

  ​​@@jasonkwcThe fogging problem of the lens guard is intrinsic. This is because there is no sealing off between the lens and the battery compartment. Heat generated from the battery would dissipate through the edges around the oval lens. If the lens guard covers it tightly as it is advertised, heat has no way out. If temperature inside is higher than outside fogging would happen. There are no other ways round except for giving vents for dissipating this heat. If riding motorcycle, the chance of getting fogging would be higher. Because the wind blown through around the oval lens guard would lower the outside temperature while the inside temperature is building up. I have tried many tests to find out this is the best among others.

• 
  @andrewwan34063 ай бұрын

  Are you using original or OEM lens guard for this? Thank you for sharing.

• 
  @kslam57333 ай бұрын

  ​@@andrewwan3406I use the original which is quite crystal clear. I haven't used the OEM guard. As it is closely related to the quality of the photos taken I prefer invest more on this.

• 
  @denverdaynasar3 ай бұрын

  this is the best, got tons of videos here in YT ,this one solved my bobbin issue, thank you!!!!!!

• 
  @user-pz9mf1gi1q3 ай бұрын

  Me gustarisaver qué ilo es el más grande o grosor que llueva la selva soy de casas grandes Chihuahua México Guillermo Asevedo Bejarano botas el Bronco saludos

• 
  @kslam57333 ай бұрын

  Not fully understand the text translated. The thickness of the threat depends on what you want to sew. From my experience, use good quality and not too thin thread is the golden rule. The thread needs to pass through many edges of the machine, It is easy to break. You also need to use proper size of needle and right thickness of thread, they need to match. All these should be learned through practices by yourself.

• 
  @zapa1pnt4 ай бұрын

  Really great idea and you don't even need to stitch it, just melt it together. 👍👍👍 😁✌🖖

• 
  @orinaker21114 ай бұрын

  16:39. My thread gets hungup in bobbin and breaks timing is good

• 
  @andrewlee47224 ай бұрын

  有冇辦法可以重組上村呀？ 44, 45？

• 
  @kslam57334 ай бұрын

  可試試這link facebook.com/groups/956824101360808/permalink/1980713598971848/ 如看不到，請通知。

• 
  @MrIgottap6 ай бұрын

  Thank you. I recently purchased a similar sewing machine and have been watching a lot of videos about it. This is the first and only one I’ve found that shows it being used to sew something besides leather. It seems to be a very versatile piece of equipment for the price if you’re willing to work with it.

• 
  @kslam57336 ай бұрын

  You would love it more if use it more in your daily life. Thank you for giving this wonderful feedback.

• 
  @JB-uj8mz6 ай бұрын

  ❤thank you I couldn’t get mine to work till I followed your video😮🙏🏼🙏🏼

• 
  @leonidyepifanov79746 ай бұрын

  Thank you very much for the useful information

• 
  @TheBrad6056 ай бұрын

  My top threads breaks when I got through any leather. I can sew nylon fine. I can’t figure out why leather isn’t working. Any ideas?

• 
  @captainjack3303Ай бұрын

  I’m having the same problem, have you figured it your yet?

• 
  @vevenaneathna7 ай бұрын

  usable capacity will only be about 85% of what went into the bank due to boost converter and wire losses so about 7594mah, and it has a pretty good voltage sag under 1 amp load so u only get about 4.4v out so i would guess about 30-34WH usable capacity.

• 
  @ronnietrosclair70917 ай бұрын

  A helpful hint. Instead of using pliers or some other metal tool to remove the bobbin shuttle (which can cause burs or other damage) use a magnet.

• 
  @kslam57337 ай бұрын

  Thanks for your idea. The bobbin driver is guite hard to be pulled out by magnet. As it is not always needed to move the driver out, using plier just once or twice does not matter.

• 
  @enyawdnitram1857 ай бұрын

  Hello. Perhaps you can help. I bought the Chinese shoe patch machine in October of 2022. I spent a month watching videos, etc. For some reason I could not get the machine to pick up the bobbin thread. So frustrated I put in the closet for a year. Pulled it out recently, and finally fixed the bobbin thread issue. Once the bobbin pickup worked, then I had an issue of the upper thread breaking. Watched some more videos, and did some intense sanding of all the bobbin parts. That stopped the breaking. Now, the thread is too loose. Before I just immediately tighten the bobbin spring, can you tell what would be causing the bottom thread to be too loose on my finished tests?

• 
  @kslam57337 ай бұрын

  1. Tighten the small flat on the side of the bobbin. 2. If not work, tighten the upper thread knob. The result is the bottom thread cannot move the upper thread too much. Bottom thread would be tightened then.

• 
  @enyawdnitram1857 ай бұрын

  @@kslam5733 thanks. It’s working now

• 
  @TheBrad6056 ай бұрын

  My top threads tears when I sew leather, it’s fine with nylons. What did you do to stop it from tearing your thread?

• 
  @kslam57336 ай бұрын

  @@TheBrad605 may be the thread is too thin for leather. use thicker thread would solve.

• 
  @Awannabestylist8 ай бұрын

  Very well-done!

• 
  @tunkunrunk9 ай бұрын

  what's the name of the clear yellow tape ? was it worthy buying new cells ? didn't they match the price of a new power bank ?

• 
  @kslam57338 ай бұрын

  The tape is heat resistant and so it is good to use in this temperature sensitive environment. I don't know how it is called but we call it 'gold 'tape. If you DIY, you can use quality cells. Certainly the price would be higher than those of new power banks as they would usually use cheaper cells. I used quality cells so the price is a bit higher. I enjoyed the DIY process and would not consider the price as this MI power bank is my first bank bought around 2013.

• 
  @angelgonzalez1338 ай бұрын

  Kapton

• 
  @budiwaloyo84269 ай бұрын

  aku hadir bosqu, siiiip banget tutorialnya jelas

• 
  @nawawithe912310 ай бұрын

  This model of sewing machine can not sew the shoe's sole, can you do a video doing such task or is there a different design of this machine that shoe the sole? thanks

• 
  @aiisaouihakim-5558 Жыл бұрын

  What type and size of thread and needle size do you use please

• 
  @kslam5733 Жыл бұрын

  Normally, using needle 14-16 is quite good for soft leather and greater than 16 for more thicker leather. I often use 16 for my daily repair works - shoes, belt, bags. The thread is usually TEX 40. Thread and needle need to be paired: thread should be slim enough to fit the needle groove. If not, it will break when it jams with the needle going through the hole on the metal plate. Even if it can go through the hole, it will not form a loop for the bobbin hoke to catch and wrap around the bobbin case due to thight friction.

• 
  @alexlopez8922 Жыл бұрын

  Your machine came with the hole in top of the bobbin or you made it, coz mine doesn’t have that one, is it important?

• 
  @kslam5733 Жыл бұрын

  Do you mean the iron flat plate on top of the bar? the hole comes with the plate because the plate can be used both sides, it is for fitting onto the extrude point for fixing the plate. My bobbins do not have holes on them. If there is, it is for easy threading of the bobbin.

• 
  @ItAintMeBabe99 Жыл бұрын

  Excellent, thanks.

• 
  @tomdenniston5933 Жыл бұрын

  The video I wish I had made! It is critical that the heel of the hook is past the needle like at 7:15, and there is an opening between the "moon" and the heel. Along with smooth contact for the thread coming under. Great video!

• 
  @kslam5733 Жыл бұрын

  You know the ways how this little wonder works and describe in words clearly. Hope you can find more from this 'museum collection' item. Thanks for watching.

• 
  @kenh8979 Жыл бұрын

  Wonderful video. I wish you'd do a video showing how the rear cams time to the levers as the handwheel is moving. THANK YOU so much for a great well explained video.

• 
  @kslam5733 Жыл бұрын

  I hope so, but at this moment I am quite indulged in other interesting things such as electronics and 3D drawing. I would take it up when time permits.

• 
  @gergemall Жыл бұрын

  Thank you,

• 
  @sargisbeorkyubeyukyan7653 Жыл бұрын

  Супер меня помог

• 
  @kslam5733 Жыл бұрын

  you are welcome.

• 
  @hughanderson7285 Жыл бұрын

  Is this in place of backstitches?

• 
  @TheSurvivorJane Жыл бұрын

  Perfectly explained!! Thank you so much for showing such detail in this video. Great job!!

• 
  @kslam5733 Жыл бұрын

  Thanks for your encouragement. Hope you can find fun in using the little machine.

• 
  @marinopacentrilli9533 Жыл бұрын

  Your the man. I watched the rest your the best.

• 
  @kslam5733 Жыл бұрын

  Thanks for comments. Hope you can get the best from my videos.

• 
  @joaquing7003 Жыл бұрын

  Again you have helped me to get the machine working correct. Thank you for your videos.

• 
  @kslam5733 Жыл бұрын

  Nice to see my videos still play a role in solving the sewing problems when using this little machine. Thanks for watching.

• 
  @toma3valentin Жыл бұрын

  Thanks!

• 
  @joaquing7003 Жыл бұрын

  Thank you for making these videos. You have helped me very much.

• 
  @kslam5733 Жыл бұрын

  You are welcome. Happy to see you can find hints to the issues you encountered after watching the videos.

• 
  @gw5436 Жыл бұрын

  Mr Lam, could you explain the size of thread and needle you are using in this video please sir? Thank you

• 
  @kslam5733 Жыл бұрын

  Needle 16, thread 210D (DENIER) or 70 (TEX)

• 
  @gw5436 Жыл бұрын

  @@kslam5733 Thank you sir.

• 
  @keyladiaz176 Жыл бұрын

  壮观的视频，但我的机器没有缝制或从下面取下线在一边 Zhuàngguān de shìpín, dàn wǒ de jīqì méiyǒu féng zhì huò cóng xiàmiàn qǔ xià xiàn zài yībiān

• 
  @kslam5733 Жыл бұрын

  This google translated Chinese is not up to my level of understanding. I cannot catch what your issue with the machine. Still, thanks for watching.

• 
  @thanson77 Жыл бұрын

  The mystery is solved!

• 
  @thanson77 Жыл бұрын

  I like the cell phone compartment on the bag. Thank you for the video.

• 
  @kslam5733 Жыл бұрын

  Thank you for watching. The cell phone compartment is the main reason why I DIY this small bag. I could not find one suitable for bringing all my personal stuff such as ID card, credit card, cash, keys and above all the cell phone in the market.

• 
  @richj5762 Жыл бұрын

  Please, Where did you get the Aluminum Bobbins

• 
  @kslam5733 Жыл бұрын

  I bought them from Chinese e-shop, the link is as follows : kzread.info?event=comments&redir_token=QUFFLUhqazNxc2pPTDhRTFQzZmlKLUlUa0pGNEZhLWN5QXxBQ3Jtc0trTnZkYzdTcUhNMGxLNGhwempxNzQ0MWh0S1RTRDl3a0M4NHFfTVFnMklGN1RYX2ZLa21WREZyUk9TUVFtNDY5bkdwMERDTF94MTJEb3pVaHZud1pORDZPN3p2RkxFQjR0VXhpb2tZNV9uWk4xQmdvdw&q=https%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fspm%3Da1z10.5-c-s.w4002-16115355381.42.24505c5alakYoy%26id%3D529266903125&stzid=UgzhtghmsSJReN5S1TB4AaABAg.9NLmPx0AHcJ9NM7cKLc7Fr

• 
  @richj5762 Жыл бұрын

  Do you, or anyone, know the diameter of the Bobbins?

• 
  @iz1885 Жыл бұрын

  Wow. This video is awesome. You are legend in teaching.👌👌

• 
  @kslam5733 Жыл бұрын

  Thanks, hope that it helps people understand more the machine, and more confident they can be to deal with any issues happened.

• 
  @antonioaguilar29852 жыл бұрын

  Hola,saludos desde argentina.una pregunta como se podria alagar mas las puntadas aparte del tornillo regulador de puntadas,dede ya muchas gracias.espero llegue a usted mi pregunta

• 
  @kslam57332 жыл бұрын

  Only by hand: move up the presser foot (disable it), move the fabric each time to a suitable length, then turn the needle down to sew.

• 
  @Jeweled_and_tooled_customs2 жыл бұрын

  How do I get the foot to wall again

• 
  @kslam57332 жыл бұрын

  Do you mean "get the foot to work" again ？ Describe more about the issue you are encountering.

• 
  @nobracobra2 жыл бұрын

  wow ty ty

• 
  @hakimmic2 жыл бұрын

  Thank you very much for these videos. They are very helpful and informative. I'm very happy with my machines performance. but I would like to try to get my patcher to sew a little thicker thread with out fraying and knotting up and braking the top thread. Seeing through your transparent shuttle bed cover I can see what is happening. (I'm using a135x16LR grooved needle plus the thicker thread) Therefore running out of room. I think by making the needle hole a little bigger may solve my problem.

• 
  @hakimmic2 жыл бұрын

  Your videos are very informative. Thank you for your time and efforts.

• 
  @louparsons2 жыл бұрын

  A great reason to buy a patcher, and a very clever idea. Thanks for making the video. YVR

• 
  @kslam57332 жыл бұрын

  There are many reasons for buying the patcher if DIY is part of your life. It is indeed a basic tool like those screwdrivers, pliers and hammer. Thanks for giving your words of appreciation.

• 
  @mikemc11142 жыл бұрын

  I use a small magnetic seam guide like the one you are showing and have never had a problem...? If you have this problem just use a small piece of wood or metal and attach with a rubber band.

• 
  @kslam57332 жыл бұрын

  thanks for your feedback. If you use thicker thread, the gap the magnetic guide raised would not allow the thread jam inside so this would help eliminate the problem. Thanks also for your suggestions using rubber band to reduce the magnetic force.