At first I was wondering "why are all those cones knocked over, and how can he know where he is going?" then I figured it out.
@plap.3 күн бұрын
I brought my Corrado to an autocross years ago and was stuck into a weird class because of the super charger. Did ok because my competition was a Taurus SHO and they loved the car. As far as me though, I found my biggest problem was finding the course in that sea of cones. Out of five runs i could only manage to stay on course twice. Those runs being significantly slower than they should have been trying to get a full run in just to keep in the competition. It seems i need a real track. Im fast with real roads, i just cant seem to focus on a course of cones to keep track of where i am. Even watching your run reminded me of this. I just see orange everywhere and lose the corse. You have it down.
@knightlautrec43113 күн бұрын
I like the name Fopeano. Good job driving too!
@TGFischer19805 күн бұрын
Congratulations! Great drive!
@automanual796813 күн бұрын
!
@Fopeano25 күн бұрын
10:25 This awesome fella with the flag, like everyone else working who keeps this track a god damn gem, knows me and my car very well at this point. Next track day here is 2 weeks from tomorrow, I'll try to get a good video.
@SakuraMunsta229 күн бұрын
Man I remember watching this back when I was 20 in 2003. Awesome bringing back great memories and when I owned my first Nissan Onevia. 2 years after I finally got my first GC and I stuck with GCs ever since.
@briandietz28072 ай бұрын
Completely Ridiculous!
@Fopeano4 ай бұрын
1:08 That car sounds sooooooooooooo good (That's me filming Anthony lapping my car).
@Fopeano5 ай бұрын
When I watch these videos this time of year, I keep thinking "this car is just chillin' in my garage waiting to be unleashed".
@FopeanoАй бұрын
It's now been unleashed and it's a damn beast as usual. Knowing I'll be driving on car this track again in a month is a great feeling.
@dhwang405 ай бұрын
Sexy
@Fopeano5 ай бұрын
I just want to say, a guy named Zachary Maki wrecked this car 9/22/18. This great car was legally destroyed by a man who failed to observe traffic. It took 10 months of bickering with Zachary Maki's shit Esurance people to get paid half ($11k) of the car's value. In 2024, this is painful to watch. I'd rather still have the car....
@Fopeano5 ай бұрын
Lars Pennartz, I don't remember your name properly, but this is your engine in this video. Reply with something if you ever find this. Whoever you sold this car to got a solid engine that probably went to the scrapyard. When I got done with this job, the car ripped hard AF, but that was a different time...
@Fopeano6 ай бұрын
I've always wished that Eric, the guy riding along would somehow find this video and post a comment about his experience. The Idea that my cheap track car can impress guy in a full race suit riding his bike on this track, impresses me.
@DACLB6 ай бұрын
Hello, can someone help me please? I have a 2006 Lancer Ralliart and the transmission sounds a lot. I went to many junk cars and I only got a 4th generation eclipse with the same 4g69 engine. Will the transmission work for my Lancer Ralliart? I checked the code and the one on the eclipse starts with KF5M422V5P and the one on my lancer starts with F5M422R795. Will it work for you?
@Fopeano6 ай бұрын
Probably not, but I've heard this talked of before. If you reply to this comment, I'll ask some people tomorrow.
@DACLB6 ай бұрын
@@Fopeano Please ask, help me, I appreciate it very much🙌🙏
@DACLB6 ай бұрын
@@Fopeano ????
@user-zq3xm5mp6r6 ай бұрын
I think you forgot the middle bolt on the retaining clip? Ffwd to 11:25 Any tips on how to get the snap ring snapped back into place? The one under the plug that the book says to stab with a common screw driver. I'm stuck asf.
@Fopeano6 ай бұрын
11:25 flipped over because of groove worn in the side that's supposed to face the bearing. When the case is back together, stick a pry bar into the square hole with the 6 bolt cover and pry that shaft up towards that cap you punctured. It will lift the bearing with the groove so that ring catches it.
@briandietz28076 ай бұрын
Did this guy's reply work to get that bearing snapped into the clip?
@Fopeano7 ай бұрын
New Update: The car was crashed and scrapped a couple years ago. This Badass Beast transmission is out there in the salvage parts system. If anyone cares and comments about getting it, I'll give you this car's VIN to your're sure that you're getting the right unit.
@jasonbardwell64027 ай бұрын
My 2010 kia rio lx 1.6 timing belt broke while doing 30 mph All it did was the battery light came on the it died no sounds at all Can it be fixed or am i screwed Please and thank you
@Fopeano7 ай бұрын
Probably screwed, but not hearing noises is a possible win. The battery light comes on if the alternator stops (usually because of a broken drive/accessory/serp belt) but maybe it's because the engine stopped. Good luck! 👍
@jasonbardwell64027 ай бұрын
@@Fopeano maybe the new ho alternator went bad not sure what's going on just when trying to start just a winning noise Tomorrow I'll check the belts only one o can't check it the timing belt
@deytonthepoolguy7 ай бұрын
One of the best compilations
@hemtet55008 ай бұрын
This was an incredible watch it perfectly explains why after two weeks I cannot get the hub off. It also clearly shows why I’ve distorted my hub so much it’s basically undriveable so I can’t get it to the shop ho hum what to do, and no one wants to do it. I now see what needs to be done maybe it’s a scrapper.
@DRIFTSTYLE8098 ай бұрын
Omg this video is back!!❤❤
@davesworld21329 ай бұрын
That’s awesome . I love the track data too.
@Fopeano9 ай бұрын
The clip of the flyby was my new leap forward in editing. Had to export my RaceRender video and use PowerDirector to splice it in. Another 100 years at this and I'll be ready to edit Hollywood blockbusters... 🤣🤣
@allseeingeyezz9 ай бұрын
one of my brand new Continental TerrainContact H/Ts is like this. been chasing this problem for months now. so annoying. thought i was a bent axle shaft or bearing at first. dealerhsip even replaced my rear differential. but i think it's the tire... of course tire shop says runout specs are good....
@MrBigsky1310 ай бұрын
Looks Good Pedro. Guys you can drop your pan with the engine sitting in the vehicle and re-ring it and put in new bearings. Just hone it out and your ready to go.
@Fopeano10 ай бұрын
Si, senor!
@tysonmayberry120811 ай бұрын
using foul language doesn't make you a Dude it proves that you aint one
@manuelchairez9984 Жыл бұрын
Did you make any other modification to the head? Or is just to put the camshaft?
@davesworld2132 Жыл бұрын
One of these days I wanna get up to the racetrack and do a few laps with you. This looks like so much fun!
@Fopeano Жыл бұрын
June 15th it can happen. All you need is a proper helmet, preferably SNELL certified. I'm serious.
@davesworld2132 Жыл бұрын
@@Fopeano very tempting!!!!! What’s the class? Can any car come ?
@Fopeano Жыл бұрын
@@davesworld2132 You can come and ride along as much as you want, possibly with other people as well. The host is pretty relaxed about that kind of thing. My friend and I are sharing the car, using in 2 different run groups. Any car that passes tech is fine, people bring all kinds of things. It's been sold out for months. I've had several friends including my dad out to ride along and hang out for as much of the day as they feel like. It's a good time as long as the weather is good.
@davesworld2132 Жыл бұрын
@@Fopeano So cool. When does the season run to?
@daveyt4802 Жыл бұрын
How do they get so loud? Dry bearings? Lost grease? Sealed bearing?
@daveyt4802 Жыл бұрын
Now how hard is it to install a new one? Bolts pull them in OK?
@daveyt4802 Жыл бұрын
Nice! Just need to borrow or rent one.
@ItsMeGaryG Жыл бұрын
The input shaft bearing retainer was put on upside down and missing a bolt. Visible at 11:38.
@Fopeano Жыл бұрын
The side meant to face the bearing had a very deep groove worn in it that would fail to properly locate the bearing. Thread locking compound was used on the 2 bolts that could be installed with it upside down.
@ItsMeGaryG Жыл бұрын
Gotcha.
@laurierogers7053 Жыл бұрын
Rear wheel
@sabertachet Жыл бұрын
This looks like a 2.4l 2azfe engine thats the same as in a bunch of other 4 banger toyotas. I have one in my 07 camry with a bearing going out and you can only reach 1 connecting rod without removing the crank case. I'm thinking it's almost identical to this video here, so im going to tear into it. I had tons of flakes from bearing material in the oil pan with a nasty knock after I did the head gasket. Too bad its a manual transmission so I wont have any wiggle room for the crank bearings. Thanks for showing this video it's the only one I've found i wasn't sure it could even be done without pulling the engine and trans.
@sabertachet Жыл бұрын
Post job update: the biggest hang up was getting the crankcase (upper oil pan) out. The bolts were easy to reach but I recommend removing a section of exhaust because the crankcase itself is very hard to maneuver into place. Overall, lots of gasket material has to be cleaned off, the engine must be retimed, and since it's a manual transmission, the top bearings had to be spun out with a screw in the crankshaft oil port. If I was a shop I would charge probably 2 grand for it because it's tons of tedious labour. Definitely better than pulling the engine with the manual trans though. If you have any questions respond here I might read it.
@Vertigoneardeath Жыл бұрын
Don't get any better. Keep 'em coming.
@Fopeano Жыл бұрын
That clip starting at 14:26 Does anyone have more of that or know where the footage came from? All things considered, the driving is pretty aggressive. I'd guess it might be the guy driving in the Option video of the Yellow Bird being drifted around the Nürburgring by a guy driving one of the fastest cars of the time at it's limit while in street clothes. kzread.info/dash/bejne/gYeBpciJcbavnbQ.html
@MarioLT4 Жыл бұрын
Was really cool. One of the best videos on KZread.
@Fopeano Жыл бұрын
Possibly more credit than I'm due, but I really do appreciate that comment.
@shabirubarikia7153 Жыл бұрын
Is it okay to have those flames coming out of an engine?
@Fopeano Жыл бұрын
This has already been debated to death in this comment section, but yes it is ok.
@Eastonsbeaston Жыл бұрын
what rims?
@Fopeano Жыл бұрын
15x6.5 Rota Slipstream knockoffs called Flik Blasts, bought in 2005. 4x100 ET35 73.1mm hub bore. I had one of them damaged and I'm having a hell of a time finding a match whether it's a Rota or a Drag Racing model. The small ones look like mine and the 17"+ have a different shape, and the listings sometimes show the 17" shape for the 15" wheel... It just keeps getting more complicated, but I digress. Order 15" Slipstreams today, and these are almost exactly what you're getting.
@spardadmon5236 Жыл бұрын
Hello! I have a 2007 Eclipse GT 6 speed manual. When the car idles there is this ticking sound coming from the engine bay and can be heard on the inside as well. When i step on the clutch the noise goes away. Also in gear and rolling when put in neutral the noise is faster and slows dwn after a bit. It can also be heard while in gear i think. Any idea on what this could be?
@belowfray5251 Жыл бұрын
Why beat the end of axle? I would strike in direction away from hub at the puller frame
@housepumpinpc3983 Жыл бұрын
Damn...I'm about to stroke out. Time to go to the yard and buy a spindle.
@Fopeano Жыл бұрын
Yeah man, love that comment. I was just talking with an older guy today about dealing with this kind of rust, and how it takes so much experience and PITA failures to get to the point of doing this kind of work successfully.
@AJ-bi8ku Жыл бұрын
Yep, this is why I do my own work.
@rmil5344 Жыл бұрын
after all that work, why didn't you put anti seize compound on the new hub
@Fopeano Жыл бұрын
I didn't think I needed to show the rest of the job, so you didn't see me put GREASE on the mating surfaces. Keep your garbage anti-seize to the side except for exhaust parts. Every time I take an anti-seize brake job apart I get pissed at the disgusting mess, especially all the times something is seized anyway because those products are mediocre at protecting metal from moisture. Tub of grease + acid brush = the right way.
@rmil5344 Жыл бұрын
@@Fopeano ok' good work carried out on difficult job. thanks for taking time to reply
@rmil5344 Жыл бұрын
@@Fopeano ok, good job carried out on difficult job, thanks for taking time to reply and clear up the grease issue
@richardearocho-caban6010 Жыл бұрын
I have the same issue with the bearings on my Eclipse 2006 3.8 v6. This is the 6speed trans or the 5speed?
@Fopeano Жыл бұрын
This is the 5 speed that came on the 4 cylinder. It's a Mitsubishi-made trans. Your 6 speed is similar in theory, but it's made by Aisin-Warner and is slightly more complex. I've never opened one of those, so I can't offer any specific advice on that transmission.
@TheSwampax Жыл бұрын
Hope this vid will last forever <3
@json81722 жыл бұрын
Nice, sounds like mine. Very similar setup but with autotech & TT.
Пікірлер
Its not about size, but how you handle it😂😂😂😂
At first I was wondering "why are all those cones knocked over, and how can he know where he is going?" then I figured it out.
I brought my Corrado to an autocross years ago and was stuck into a weird class because of the super charger. Did ok because my competition was a Taurus SHO and they loved the car. As far as me though, I found my biggest problem was finding the course in that sea of cones. Out of five runs i could only manage to stay on course twice. Those runs being significantly slower than they should have been trying to get a full run in just to keep in the competition. It seems i need a real track. Im fast with real roads, i just cant seem to focus on a course of cones to keep track of where i am. Even watching your run reminded me of this. I just see orange everywhere and lose the corse. You have it down.
I like the name Fopeano. Good job driving too!
Congratulations! Great drive!
!
10:25 This awesome fella with the flag, like everyone else working who keeps this track a god damn gem, knows me and my car very well at this point. Next track day here is 2 weeks from tomorrow, I'll try to get a good video.
Man I remember watching this back when I was 20 in 2003. Awesome bringing back great memories and when I owned my first Nissan Onevia. 2 years after I finally got my first GC and I stuck with GCs ever since.
Completely Ridiculous!
1:08 That car sounds sooooooooooooo good (That's me filming Anthony lapping my car).
When I watch these videos this time of year, I keep thinking "this car is just chillin' in my garage waiting to be unleashed".
It's now been unleashed and it's a damn beast as usual. Knowing I'll be driving on car this track again in a month is a great feeling.
Sexy
I just want to say, a guy named Zachary Maki wrecked this car 9/22/18. This great car was legally destroyed by a man who failed to observe traffic. It took 10 months of bickering with Zachary Maki's shit Esurance people to get paid half ($11k) of the car's value. In 2024, this is painful to watch. I'd rather still have the car....
Lars Pennartz, I don't remember your name properly, but this is your engine in this video. Reply with something if you ever find this. Whoever you sold this car to got a solid engine that probably went to the scrapyard. When I got done with this job, the car ripped hard AF, but that was a different time...
I've always wished that Eric, the guy riding along would somehow find this video and post a comment about his experience. The Idea that my cheap track car can impress guy in a full race suit riding his bike on this track, impresses me.
Hello, can someone help me please? I have a 2006 Lancer Ralliart and the transmission sounds a lot. I went to many junk cars and I only got a 4th generation eclipse with the same 4g69 engine. Will the transmission work for my Lancer Ralliart? I checked the code and the one on the eclipse starts with KF5M422V5P and the one on my lancer starts with F5M422R795. Will it work for you?
Probably not, but I've heard this talked of before. If you reply to this comment, I'll ask some people tomorrow.
@@Fopeano Please ask, help me, I appreciate it very much🙌🙏
@@Fopeano ????
I think you forgot the middle bolt on the retaining clip? Ffwd to 11:25 Any tips on how to get the snap ring snapped back into place? The one under the plug that the book says to stab with a common screw driver. I'm stuck asf.
11:25 flipped over because of groove worn in the side that's supposed to face the bearing. When the case is back together, stick a pry bar into the square hole with the 6 bolt cover and pry that shaft up towards that cap you punctured. It will lift the bearing with the groove so that ring catches it.
Did this guy's reply work to get that bearing snapped into the clip?
New Update: The car was crashed and scrapped a couple years ago. This Badass Beast transmission is out there in the salvage parts system. If anyone cares and comments about getting it, I'll give you this car's VIN to your're sure that you're getting the right unit.
My 2010 kia rio lx 1.6 timing belt broke while doing 30 mph All it did was the battery light came on the it died no sounds at all Can it be fixed or am i screwed Please and thank you
Probably screwed, but not hearing noises is a possible win. The battery light comes on if the alternator stops (usually because of a broken drive/accessory/serp belt) but maybe it's because the engine stopped. Good luck! 👍
@@Fopeano maybe the new ho alternator went bad not sure what's going on just when trying to start just a winning noise Tomorrow I'll check the belts only one o can't check it the timing belt
One of the best compilations
This was an incredible watch it perfectly explains why after two weeks I cannot get the hub off. It also clearly shows why I’ve distorted my hub so much it’s basically undriveable so I can’t get it to the shop ho hum what to do, and no one wants to do it. I now see what needs to be done maybe it’s a scrapper.
Omg this video is back!!❤❤
That’s awesome . I love the track data too.
The clip of the flyby was my new leap forward in editing. Had to export my RaceRender video and use PowerDirector to splice it in. Another 100 years at this and I'll be ready to edit Hollywood blockbusters... 🤣🤣
one of my brand new Continental TerrainContact H/Ts is like this. been chasing this problem for months now. so annoying. thought i was a bent axle shaft or bearing at first. dealerhsip even replaced my rear differential. but i think it's the tire... of course tire shop says runout specs are good....
Looks Good Pedro. Guys you can drop your pan with the engine sitting in the vehicle and re-ring it and put in new bearings. Just hone it out and your ready to go.
Si, senor!
using foul language doesn't make you a Dude it proves that you aint one
Did you make any other modification to the head? Or is just to put the camshaft?
One of these days I wanna get up to the racetrack and do a few laps with you. This looks like so much fun!
June 15th it can happen. All you need is a proper helmet, preferably SNELL certified. I'm serious.
@@Fopeano very tempting!!!!! What’s the class? Can any car come ?
@@davesworld2132 You can come and ride along as much as you want, possibly with other people as well. The host is pretty relaxed about that kind of thing. My friend and I are sharing the car, using in 2 different run groups. Any car that passes tech is fine, people bring all kinds of things. It's been sold out for months. I've had several friends including my dad out to ride along and hang out for as much of the day as they feel like. It's a good time as long as the weather is good.
@@Fopeano So cool. When does the season run to?
How do they get so loud? Dry bearings? Lost grease? Sealed bearing?
Now how hard is it to install a new one? Bolts pull them in OK?
Nice! Just need to borrow or rent one.
The input shaft bearing retainer was put on upside down and missing a bolt. Visible at 11:38.
The side meant to face the bearing had a very deep groove worn in it that would fail to properly locate the bearing. Thread locking compound was used on the 2 bolts that could be installed with it upside down.
Gotcha.
Rear wheel
This looks like a 2.4l 2azfe engine thats the same as in a bunch of other 4 banger toyotas. I have one in my 07 camry with a bearing going out and you can only reach 1 connecting rod without removing the crank case. I'm thinking it's almost identical to this video here, so im going to tear into it. I had tons of flakes from bearing material in the oil pan with a nasty knock after I did the head gasket. Too bad its a manual transmission so I wont have any wiggle room for the crank bearings. Thanks for showing this video it's the only one I've found i wasn't sure it could even be done without pulling the engine and trans.
Post job update: the biggest hang up was getting the crankcase (upper oil pan) out. The bolts were easy to reach but I recommend removing a section of exhaust because the crankcase itself is very hard to maneuver into place. Overall, lots of gasket material has to be cleaned off, the engine must be retimed, and since it's a manual transmission, the top bearings had to be spun out with a screw in the crankshaft oil port. If I was a shop I would charge probably 2 grand for it because it's tons of tedious labour. Definitely better than pulling the engine with the manual trans though. If you have any questions respond here I might read it.
Don't get any better. Keep 'em coming.
That clip starting at 14:26 Does anyone have more of that or know where the footage came from? All things considered, the driving is pretty aggressive. I'd guess it might be the guy driving in the Option video of the Yellow Bird being drifted around the Nürburgring by a guy driving one of the fastest cars of the time at it's limit while in street clothes. kzread.info/dash/bejne/gYeBpciJcbavnbQ.html
Was really cool. One of the best videos on KZread.
Possibly more credit than I'm due, but I really do appreciate that comment.
Is it okay to have those flames coming out of an engine?
This has already been debated to death in this comment section, but yes it is ok.
what rims?
15x6.5 Rota Slipstream knockoffs called Flik Blasts, bought in 2005. 4x100 ET35 73.1mm hub bore. I had one of them damaged and I'm having a hell of a time finding a match whether it's a Rota or a Drag Racing model. The small ones look like mine and the 17"+ have a different shape, and the listings sometimes show the 17" shape for the 15" wheel... It just keeps getting more complicated, but I digress. Order 15" Slipstreams today, and these are almost exactly what you're getting.
Hello! I have a 2007 Eclipse GT 6 speed manual. When the car idles there is this ticking sound coming from the engine bay and can be heard on the inside as well. When i step on the clutch the noise goes away. Also in gear and rolling when put in neutral the noise is faster and slows dwn after a bit. It can also be heard while in gear i think. Any idea on what this could be?
Why beat the end of axle? I would strike in direction away from hub at the puller frame
Damn...I'm about to stroke out. Time to go to the yard and buy a spindle.
Yeah man, love that comment. I was just talking with an older guy today about dealing with this kind of rust, and how it takes so much experience and PITA failures to get to the point of doing this kind of work successfully.
Yep, this is why I do my own work.
after all that work, why didn't you put anti seize compound on the new hub
I didn't think I needed to show the rest of the job, so you didn't see me put GREASE on the mating surfaces. Keep your garbage anti-seize to the side except for exhaust parts. Every time I take an anti-seize brake job apart I get pissed at the disgusting mess, especially all the times something is seized anyway because those products are mediocre at protecting metal from moisture. Tub of grease + acid brush = the right way.
@@Fopeano ok' good work carried out on difficult job. thanks for taking time to reply
@@Fopeano ok, good job carried out on difficult job, thanks for taking time to reply and clear up the grease issue
I have the same issue with the bearings on my Eclipse 2006 3.8 v6. This is the 6speed trans or the 5speed?
This is the 5 speed that came on the 4 cylinder. It's a Mitsubishi-made trans. Your 6 speed is similar in theory, but it's made by Aisin-Warner and is slightly more complex. I've never opened one of those, so I can't offer any specific advice on that transmission.
Hope this vid will last forever <3
Nice, sounds like mine. Very similar setup but with autotech & TT.
F. I cvvvcvv