Пікірлер

• 
  @aname52676 күн бұрын

  I need a blender to make smoothies from frozen fruit and curries from cooked onions and vegetables. Will this work for me? Promise I’ll cool the curry mix before I pour in here!

• 
  @gigibenea352910 күн бұрын

  Just bought this and is not working , please tell me what to do , thanks

• 
  @KitchenAidCa10 күн бұрын

  Hello, @gigibenea3529! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #560000 in the subject line. We look forward to hearing from you! -Max

• 
  @gigibenea352910 күн бұрын

  @@KitchenAidCa ok 👍 now is working 😀very well

• 
  @Fougagalter331512 күн бұрын

  Stopped working after one year.

• 
  @KitchenAidCa12 күн бұрын

  Hello @Fougagalter3315. Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #559492 in the subject line. We look forward to hearing from you! -Teresa

• 
  @danielwalker2614 күн бұрын

  Should have a link to where I can purchase this.

• 
  @ssing711319 күн бұрын

  Love the blender. Even put away my vitamix as smoothies are no problem in it. Also love how you can get about 20 uses on one battery charge! On my fifth smoothie and shows 3/4 battery lights still

• 
  @karis364720 күн бұрын

  Why does the black spacer not set into the housing in mine like it does in the video?

• 
  @NeilRossHistoryComedyPoetry21 күн бұрын

  I bought one of these. Worked perfectly. Tried to use it again shortly after in the same food prep. Would not work at all. Could not get the work bowl, blade and lid to line up. Put the thing away and never touched it. Had something today I needed to blend so I pulled it off the shelf. Worked perfectly. Until I tried to use it again in the same food prep. Could not get the work bowl, blade and lid to line up. Now I have a work bowl full of ingredients in my fridge. Hoping when I try again tomorrow the component parts and the universe will align. Any suggestions welcome.

• 
  @KitchenAidCa20 күн бұрын

  Hello, Neil! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #555212 in the subject line. We look forward to hearing from you! -Teresa

• 
  @Hellokitty9151s22 күн бұрын

  I broke the plastic and easy open n clean now 😢 love it though

• 
  @JanMcEvoy22 күн бұрын

  I have a 15 year old kitchen aid fridge with this extend fresh feature. I have been smelling a fish like l odor for a while now and cleaned the fridge and freezer extensively but the odor is still there. I just discovered the odor is coming from the "extend fresh'" compartment. I closed the door and the smell disappeared. How can I clean the extend fresh compartment?

• 
  @KitchenAidCa20 күн бұрын

  Hello @JanMcEvoy! We would like to look into this for you. Please email us at [email protected] with your model, serial number, and phone number. Please include case/review ID #555041 in the subject line. Thank you! -Teresa

• 
  @marcgabel516525 күн бұрын

  I did that for a living. We use thermometers tooThey're like five bucks at the dollar store

• 
  @mikhailmednikh300326 күн бұрын

  I have the same kettle and it smells like burnt plastic, even the water itself smells like plastic. When I called the repair shop and asked to replace the product, they refused to give me a replacement.

• 
  @KitchenAidCa26 күн бұрын

  Hello! We would like to look into this for you! Kindly e-mail us at [email protected] with your model and serial number, and your phone number. Please include case/review ID #553121 in the subject line. We look forward to hearing from you! -Teresa

• 
  @rozijntje3291Ай бұрын

  Does it also blend dates?

• 
  @hawkinsheidiАй бұрын

  Literally can not figure out how to open the damn lid so I can put food in it.

• 
  @cristinadickins2439Ай бұрын

  Do you have anything that shows examples?

• 
  @tiffyjacobs71722 ай бұрын

  I must be slow because I can’t even get the lid off lol 😂🤦🏻‍♀️

• 
  @miken.1717Ай бұрын

  You're slow

• 
  @hawkinsheidiАй бұрын

  OMG. I’m here for that exact reason. Twisting, lifting and the lid won’t budge without me breaking the damn thing. Still can’t get it off.

• 
  @KitchenAidCaАй бұрын

  Hello @hawkinsheidi ! We would like to look into this for you. Please email us at [email protected] with your model, serial number, and phone number. Please include case ID # 542536, in the subject line. Thank you! - Eric

• 
  @Nyny87541Ай бұрын

  I can't either bought it and still haven't used it because. Me or my husband cant get it open lol

• 
  @KitchenAidCaАй бұрын

  Hello @Nyny87541 ! We would like to look into this for you. Please email us at [email protected] with your model, serial number, and phone number. Please include case ID # 546074 in the subject line. Thank you! - Eric

• 
  @KriswixxReviews2 ай бұрын

  why isn't the thermal fuse on this servicable? easy for a quick connect? Sometimes the slider is dirty. sometimes its the board. one screw on back 4 or 5 on the side under band top comes off can looksee. worst thing you can do? its already broken. might beable to fix. bypassing thermal fuse does the trick in a pinch. never mix past 1-3.

• 
  @KriswixxReviews2 ай бұрын

  Model RRK150

• 
  @KitchenAidCa2 ай бұрын

  Hi Kris. We do not instruct how to repair on social media. We apologize for any inconvenience. Regards, Teresa

• 
  @barrellsoffun2 ай бұрын

  Is the interior made of plastic ?

• 
  @KitchenAidCa2 ай бұрын

  Hello, @barrellsoffun ! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case ID # 531679 in the subject line. We look forward to hearing from you! - Eric

• 
  @LilAngelNat832 ай бұрын

  How the fuck do you remove the lid

• 
  @KitchenAidCa2 ай бұрын

  Hello, @LilAngelNat83! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #530544 in the subject line. We look forward to hearing from you! -Max

• 
  @tiffyjacobs71722 ай бұрын

  Omg right?!? I can’t get mine off either 🤦🏻‍♀️

• 
  @tiffyjacobs71722 ай бұрын

  @@KitchenAidCaor you could’ve just told us how to remove the dang lid. Good grief!!

• 
  @KitchenAidCa2 ай бұрын

  Hello, @tiffyjacobs7172 ! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include review ID # 536353 in the subject line. We look forward to hearing from you! - Eric

• 
  @DarlineLamisere2 ай бұрын

  The bar that attaches the head to the mixer came out. How do I put it back?

• 
  @IM-JANG402 ай бұрын

  What’s the colour on lift up model on this video?. Thanks

• 
  @mikeneidlinger50032 ай бұрын

  This video is pointless. 1) It doesn't tell you which of the 3 "dimes" you want. 2) it doesn't tell you what screw does what. This video is a complete waste of time.

• 
  @KitchenAidCa2 ай бұрын

  Hello, @mikeneidlinger5003! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #527444 in the subject line. We look forward to hearing from you! -Max

• 
  @mikeneidlinger50032 ай бұрын

  @@KitchenAidCa, I'm good. There are a number of people who are question this. You should answer it publicly. So everyone has the same knowledge. it's not a trade secret.

• 
  @KitchenAidCa2 ай бұрын

  Hello, @mikeneidlinger5003! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #527444 in the subject line. We look forward to hearing from you! -Max

• 
  @Gimli.g2 ай бұрын

  If the dime does not move, then the beater is too high. If the dime moves around continuously, the beater is too low. If the dime is traveling around the bowl, moving about a quarter to a half an inch with each pass of the beater, that means the beater to bowl clearance is correct.

• 
  @juleenielsen84022 ай бұрын

  Our dish washer a Maytag a company that was known for quality has since been bought by Whirlpool. I have had to replace the upper rack adjuster and glides twice in two years. The dish washer is only used by myself and my husband. The repair man has shown me the parts that used to be used for Maytag and the newly replaced parts that are now made in China and totally disintegrate so that the rack falls down. I am so disappointed with Whirlpool for allowing this. I do not want to have to complain but we are retired, on a budget and this has been very costly when we thought we were getting a reliable brand. Because of this we are looking again at purchasing a dish washer that will do a great job and last. How can I believe that KitchenAid will be any better unless we can actually see the parts they are made of? Sorry for this negative note but it is true and we need help deciding what to do next.

• 
  @KitchenAidCa2 ай бұрын

  Hello, @juleenielsen8402! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial and phone number; Please include case/review ID# 521752 in the subject line. We look forward to hearing from you! -Max

• 
  @Squiznerl3 ай бұрын

  This same video was posted by several kitchenaid channels. This one appears to be missing the voice over instructions. Perhaps uploading again with the proper instructions would help.

• 
  @alejandraraffinetti63933 ай бұрын

  La mejor por lejos!❤

• 
  @angelitaedwards84143 ай бұрын

  Thanks!!!

• 
  @IntellectProducts3 ай бұрын

  good

• 
  @MrNiceCobra3 ай бұрын

  I am appliance repair technician. KitchenAid must be joking with this test. Just use regular $10 analog oven thermometer. Put it on the middle shelf. Select your temperature and turn on your oven on Bake or Conventional Bake only. NOT on Broil. Make sure heat elements are working and heating. Let it work at list for an hour or more. Do not open the door . Monitor your thermometer true the door glass with flashlight. Thermometer at first will show lower then actual temperature because it delays a little. But it will catch up. Temperature in oven will fluctuate a lot at the beginning but finally will kind of stabilize when oven will get hot enough. At this point heat elements will cycle on and off less often. (You will hear relay click sound when they are on or off less often.) Now it is a time to find out average oven temperature. Write down thermometer readings every 10 min. Then in the middle between highest and lowest readings will be your average oven temperature. Now compare this to your selected temperature, turn off the oven for a moment and do calibration. (No need to let owen to cool down). Turn it back on for the same temperature and continue the test for another 30 minutes or longer. Do this until your thermometer will show the same (or almost the same) temp as you selected on your oven. If you can't calibrate then replace temperature sensor first. (You may need to pull out oven to to this.) When replacing the sensor, cut out plastic male to female connector and use ceramic wire nuts instead. If this doesn't help then replace control board. You are welcome

• 
  @marcgabel516525 күн бұрын

  I did that for 35 years 2nd cycle is fine. Different ovens hold their heat for longer or shorter times. Depending on door fit and self clean non self clean. if your tech is taking over one hour to test your being over charged on the labour.

• 
  @user-pb2jp5sg8c3 ай бұрын

  If on bottom position it almost hits the door when sliding it out. If roaster on rack, the weight will drop it down and will catch.

• 
  @TheMagicShiny3 ай бұрын

  I always learned to never mix yeast and salt together in the water. Always dry ingredients including salt first, separately mix yeast and water.

• 
  @eugenetswongАй бұрын

  Yeast, according to a break making machine recipe, should be put in last. I think that bread making machines need time to mix the ingredients before activating the yeast. That being said, according to Vito, it is best to mix yeast, honey, water, and flour, in 1 mixture at the beginning to make poolish, which is a bread mixture to be used to make the crust.

• 
  @aelisei3 ай бұрын

  I am CONVINCED that whoever designed this damn lid made it especially difficult to take appart just to drive us up the f*** wall!

• 
  @paulobainz12103 ай бұрын

  Terrible appliances. Both microwave and range have been repaired numerous times. Circuit board, complete control panel for range twice replaced. Microwave malfunctions every couple of months. Absolute garbage.

• 
  @adeletavella59673 ай бұрын

  how do you get the work bowl off the base, so it can be washed?

• 
  @ArcYT4 ай бұрын

  People complaining got zero brain cells or something; it's super easy to use and it works great. zero complaints. kitchenaid is the best

• 
  @igorl83674 ай бұрын

  food gets stuck under silver ring, and no way to remove it

• 
  @KitchenAidCa4 ай бұрын

  Hello, @igorl8367! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #500967 in the subject line. We look forward to hearing from you! -Max

• 
  @tieetop4 ай бұрын

  I just bought this Professional 600 and am very anxious for its arrivals. It is replacing a lift bowl KitchenAid that I have had for almost 40 years. The old machine, which I loved and appreciated, in comparison had a much smaller motor at only 300 Watts. I am now making all my own bread and will need the more powerful motor, 575 watts provided with this newer model. Cannot say "new" model because I know it has itself been around for several years. Will be dumping my old, because at its age it is showing some strain and it is time to put it to rest.

• 
  @Annileeze4 ай бұрын

  Thank you! Mine is too low and is leaving a dark streak in batter. I’ll make the adjustments 😊

• 
  @roberts.wilson18484 ай бұрын

  sooo....which is the good setting?! and which is the bad ones?!

• 
  @kristianpalokaj33964 ай бұрын

  What is the difference between the artisan 7qt, the heavy duty 7qt and the pro line 7qt?? Really confusing?! Is the Artisan 7qt and the pro line 7qt the same? I know that the attachments can be different. The official site in the us does not have the artisan 7qt. In europe (Germany) it does.

• 
  @sunnievictoria99172 ай бұрын

  I have the same question!

• 
  @1purplekw5 күн бұрын

  Good question!! Also would like to know.

• 
  @01wildcardjeff4 ай бұрын

  Just got mine today. Lid quality is lacking. It slides around and has gaps.

• 
  @KitchenAidCa4 ай бұрын

  Hi @01wildcardjeff! If you need assistance with your slow cooker, please email us at [email protected]. Include case number 496301 and a short video of the issue. Please provide us with your phone number, email address, physical address with postal code, and the model and serial number of your slow cooker. Thanks ~ Angie

• 
  @mikebrownlee14174 ай бұрын

  lots wrong according to directions; pour chilled mixture while the mixer is on stir setting, not whats done in video. Dont use metal spoon iin the mixing bowl. I just got one. prety excited and now confused.

• 
  @KitchenAidCa4 ай бұрын

  Hello, @mikebrownlee1417! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial, and phone number; Please include case/review ID #495626 in the subject line. We look forward to hearing from you! -Max

• 
  @ionut53164 ай бұрын

  just use an infrared thermometer

• 
  @gregrm284 ай бұрын

  My dishwasher is a Kitchenaid that needs a flat dish rack for 1/2 gallon and gallon jars where do I find one??

• 
  @jeraldkelly88064 ай бұрын

  Don't waste your money I bought one in April 2023 and first thing they replaced the computer and circuit board Had 5 service calls and they all say it is within there specifications except it will not cook anything by the directions of what you cooking, have to use convection bake all the time and if your want it to brown you have to use the broiler to brown. Cook Angel food cakes and the tops fall of while hanging to cool

• 
  @KitchenAidCa4 ай бұрын

  Hi Jeraldkelly8806! Could you please email us at [email protected] with the model, serial number, and phone number? Please include Case # 488020, so we can look into what happened. Thank you. - Eric

• 
  @BradiKal614 ай бұрын

  Hiw about a video for when the power switch works intermittently? I have to run the switch back and forth a few times to get my mixer to wake up.

• 
  @vickirusso58514 ай бұрын

  Good grief what a stupid video!!

• 
  @KitchenAidCa4 ай бұрын

  Hello! Thank you for reaching out to us. Kindly e-mail us at [email protected] with your model, serial and phone number; Please include case/review ID # 486422 in the subject line. We look forward to hearing from you! - Eric

• 
  @LamiAe-uc9qs4 ай бұрын

  Le prix s'il vous plaît

• 
  @beauepperson26415 ай бұрын

  Wow that showed me nothing

• 
  @KitchenAidCa5 ай бұрын

  Hello! We are sorry you did not get the information you wanted. If we can be of further assistance, please private message us with your name, phone number, full address, and the model and serial number of your appliance. Thanks -Regina

• 
  @davidmena76954 ай бұрын

  Turn the screw it will set it up or down

• 
  @DanyP375 ай бұрын

  👃👃👃👃👃👃👃🐽🐽🐽🐽🐽🐽🐽🤣🤣🤣🤣🤣🤣🤣🤣