Пікірлер

• 
  @BlommanSwed15 сағат бұрын

  Next question 😅 What about the Pistons? Any special way to push them in? Thinking about the electric handbrake. Cant get the Piston to get in. 😢

• 
  @BlommanSwed14 сағат бұрын

  I have no computer to put the handbrake in service mode. Just got a Delphi from china. Help please 😊

• 
  @xiolage14 сағат бұрын

  Just push the front ones in, I’m not sure about the rear.. they maybe screw in?

• 
  @BlommanSwed14 сағат бұрын

  @@xiolage Im just working on the rear ones. Bur you must have pushed your Pistons in??

• 
  @xiolage14 сағат бұрын

  @BlommanSwed The front pistons just pushed in yep.

• 
  @BlommanSwed14 сағат бұрын

  @@xiolage Still om just talking about the rear 😂

• 
  @eoghanobrien7376Күн бұрын

  Hi Mate, just wondering if that rear diffuser came stock but if not where did you get it? Looking for a duel exit for my mk3 and I can’t find any decent ones that don’t have the gap for the exhaust in the center (which I don’t want) if you could help me out that would be great ! Thanks

• 
  @xiolage20 сағат бұрын

  Yep this comes as standard on all Zetec S models.

• 
  @stuarthumphrey6158Күн бұрын

  Really good and helpful video. I've just bought a 308gti so appreciate you posting this. Are there any good forums for help on these cars?

• 
  @xiolageКүн бұрын

  I haven’t really found any bar the Facebook groups (I don’t have Facebook so useless for me) 😂

• 
  @stuarthumphrey615820 сағат бұрын

  @xiolage no worries. In that case, I may be back in the future asking for help!

• 
  @BlommanSwed2 күн бұрын

  Are we sure the T55 are counter clockwise? Cant get thoose to lose, i use so much force!!

• 
  @xiolage2 күн бұрын

  Yep, counter clockwise!

• 
  @BlommanSwed17 сағат бұрын

  @@xiolage The where titghen with locktight, thats et they where so hard to loosen!! That cant be right? Do you know the torque to titghen then with??

• 
  @xiolage17 сағат бұрын

  @BlommanSwed Yep sounds about right. I can’t remember off the top of my head.. I just googled it 😁

• 
  @BlommanSwed16 сағат бұрын

  @@xiolage Cant find the torque on Google 😢

• 
  @BlommanSwed16 сағат бұрын

  Or maybe 😂 100NM for the T55. 30 for the sliper bolts.

• 
  @BlommanSwed3 күн бұрын

  Can i ask how did u get the pistons out? Any tips before i begin? And How to clean the calipers? Brakleen? And the seals anything special installing them? 😊

• 
  @xiolage2 күн бұрын

  To get the pistons out I quite literally pulled them out. The ones that were stuck I shoved a piece of wood in the calliper and pressed the pedal until they came out. Clean them with Brake/Parts cleaner! 😁

• 
  @Bongo46116 күн бұрын

  One of the best cars I've owned. Chop the exhaust off as it's too quiet and de chrome it. It's the lightest car and it handles beautifully.

• 
  @jacksore37347 күн бұрын

  I have a citroen ds3 thp 1.6 156bhp timing chain always been an issue really like the 308gti but it also has a thp engine has the timing chain been improved?

• 
  @xiolage6 күн бұрын

  I’ve not heard or experienced any timing chain issues with this engine. 😁

• 
  @jacksore37345 күн бұрын

  Really like hearing that i think this will probably be my next car just looks nice and different like unique see golf r everywhere but I've not actually seen a 308 gti in the flesh

• 
  @xiolage5 күн бұрын

  Exactly the reason I went for one. A mega bit of kit rarely seen on the road!

• 
  @TobyPage-xu6lr8 күн бұрын

  Have you got something I can get hold of you on please mate got a few questions

• 
  @xiolage8 күн бұрын

  Instagram is the best 🤘🏼

• 
  @briancristoni84139 күн бұрын

  Thank you so much! I just got done doing mine and your video helped so much!!!

• 
  @xiolage8 күн бұрын

  Glad I could help! 😎

• 
  @aaronlubrant78609 күн бұрын

  Is there any good links to more steering wheels and clock springs like these can’t find the anywhere I look?

• 
  @xiolage9 күн бұрын

  Your best bet is eBay or a breakers yard. 🤘🏼

• 
  @aaronlubrant78609 күн бұрын

  @@xiolage ok that was my next idea was a yard.

• 
  @BlommanSwed10 күн бұрын

  The back discs, did u really need to loose the electric handbrake?

• 
  @xiolage10 күн бұрын

  I reference this in the video, but essentially you may be able to do it without removing the handbrake. 😊

• 
  @BlommanSwed10 күн бұрын

  @@xiolage Ok that was what u meant when u did the other side?

• 
  @xiolage10 күн бұрын

  @BlommanSwed Yep exactly that 😁

• 
  @Skitskaskitha8211 күн бұрын

  MAN the CAR,, haha i never ever thougt id lika a FOCUS but yeeeeezzz... this one is awsome :D

• 
  @orevillagesSNP12 күн бұрын

  What age of Caddy did you put it into? What was the make/ model of stereo please?

• 
  @xiolage11 күн бұрын

  This is our 2014 Caddy, RCD360. 😊

• 
  @orevillagesSNP11 күн бұрын

  @@xiolageThanks for that, I have a 2008 mk3 - CarPlay (Android based) is very difficult to get working. Love the colour of your van and trim, mine has a very long way to go!

• 
  @xiolage10 күн бұрын

  @@orevillagesSNP Thank you!

• 
  @orevillagesSNP10 күн бұрын

  I’ve ordered one this evening

• 
  @90MohsinA13 күн бұрын

  Hi. Do you know if seats from a face-lift mk3 fit in a pre face-lift vehicle?

• 
  @xiolage12 күн бұрын

  They do. These were from a face lift 😊

• 
  @90MohsinA12 күн бұрын

  @@xiolage amazing, thank you. Hope to buy some soon.

• 
  @DerrickSarazin-jr1wo13 күн бұрын

  Hello from America! What kit is the coilovers and what year is your car? Nice video

• 
  @xiolage13 күн бұрын

  hey 👋🏼 this was Stance+ coilovers on a 2013 Focus

• 
  @DerrickSarazin-jr1wo13 күн бұрын

  @xiolage ok nice mines a dark Grey 2012. Looks good bro keep the videos coming if you will!

• 
  @anthonylloyd135315 күн бұрын

  👍

• 
  @eccboy715 күн бұрын

  Qiestion re brakes mate- did you keep the Alcons and then replace the pads with ones from Godspeed? Was looking at changing the default pistons with the Godspeed ones as well.

• 
  @xiolage15 күн бұрын

  Yep, I did film a video on this which you may find useful. Full GodSpeed stainless pistons and seals swap on the Alcons, and then GodSpeed discs and EBC pads front and back 😁

• 
  @eccboy715 күн бұрын

  @@xiolage cheers mate. Price is a bit eye watering but I think they will be a great long term investment. The rear discs will really improve the overall aesthetics since I think the default rear brakes look a bit lacklustre.

• 
  @xiolage15 күн бұрын

  Yep, agreed with the price 😅

• 
  @eccboy715 күн бұрын

  Could I also ask where you got your brembo rear pads from? Didn't see them on Godspeed just the rear kevlar ones.

• 
  @xiolage15 күн бұрын

  @@eccboy7 I got the brembo pads from Euro Car Parts, however swapped them to EBC YellowStuff shortly after which I got from EBC online.

• 
  @eccboy715 күн бұрын

  Sounds so sweet mate. Do you know what options there are for getting more noise from cars with the OPF? It sounds great on cold start but once warm it gets a little quiet. I feel anything I do will just void the warranty lol😂

• 
  @xiolage15 күн бұрын

  Luckily mine doesn’t have the OPF, but I think the best thing to do is remove the resonator. It’ll definitely void the warranty but 100% worth it. 😎

• 
  @EJHowTo16 күн бұрын

  Great video, how did you remove the air vents trim pieces. I can get them off apart from one clip. Really feels like it's going to break. Any suggestions would be great, what did you use etc. Many thanks

• 
  @xiolage15 күн бұрын

  They do just unclip, however it’s much easier when the stereo is out 😁

• 
  @Jozkah_16 күн бұрын

  time for a downpipe and a tune for 300hp 380nm

• 
  @xiolage15 күн бұрын

  👀

• 
  @itsjustemii16 күн бұрын

  👍

• 
  @9erner16 күн бұрын

  👍👍👍👍

• 
  @JamalPennant16 күн бұрын

  Good update vid.Iv got the ebc blue stuff pads on my RCZ-R, they held up really well after very heavy breaking at Bedford and castle combe.Not much more than yellow.Also castrol srf fluid fluid lasted alot longer than the motul rbf 600. Expensive fluid but worth it.

• 
  @xiolage16 күн бұрын

  Thanks for the info, i’ve read up a bit about the blue stuff pads.. may need to give them a go! 👀

• 
  @Jozkah_16 күн бұрын

  any difference on a daily basis or purely track? (for the oil comparison)

• 
  @JamalPennant16 күн бұрын

  @@Jozkah_ the Castrol srf brake fluid and motul is fine to use on your daily ( as mine is). With the motul I would do the track day, daily the car then if I did another track day it would be soft after only 3 laps at a time. So I started to change the motul fluid before every track day . The Castrol srf was solid through the track day and fine daily. It's much better at dealing with the heat. I plan to change the fluid once a year now, instead of multiple.

• 
  @Jozkah_16 күн бұрын

  @@JamalPennant i do fast street so it’s the same principle, i’m pretty satisfied with stock brakes( ds2500 ), on my second set of OEM, only now deciding to upgrade the oil cuz i’m changing rear brake lines

• 
  @ExZacaly16 күн бұрын

  Great video mate and great car thank you

• 
  @xiolage16 күн бұрын

  Thank you mate!

• 
  @juliopinheiro16 күн бұрын

  Nice paint man!

• 
  @xiolage16 күн бұрын

  Thank you

• 
  @DrW039217 күн бұрын

  Looks rad! I just ordered a set of coilovers myself! I am considering replacing the sway bar end links as they are stock and are bound to starting knocking- thought I would take care of it while down there.

• 
  @TobyPage-xu6lr18 күн бұрын

  Hi mate what did you need to change the steering wheel?

• 
  @xiolage18 күн бұрын

  Hi mate, I have a whole video discussing everything you need. 😎

• 
  @TobyPage-xu6lr18 күн бұрын

  @@xiolage sound mate I’ve found it already. Sick mk3 😎😎

• 
  @asdfsfasdfasd19 күн бұрын

  Did you lower the suspension system or/and change the springs? Looks low and nice

• 
  @xiolage19 күн бұрын

  Full air suspension setup 🤌🏼

• 
  @asdfsfasdfasd19 күн бұрын

  @@xiolage awesome, thanks man 👍

• 
  @pk-dn5sj21 күн бұрын

  Month ago a memory poped up on my Facebook from my 48 hours test drive of this beast from Peugeot ❤❤❤ The best 2 petrol tanks I've ever burned😂😂😂 What a machine such a mechanical feeling to it..I've hunted down everything in my view😊 Loved it🎉

• 
  @neilyevomanayre618121 күн бұрын

  Great video. Definitely inspired me to my 308 on a track day 👍

• 
  @xiolage21 күн бұрын

  YES! 100% would recommend. Felt like I was driving a bloody go kart, epic day! Thanks for watching.

• 
  @deathwish700521 күн бұрын

  I am quite surprised that you car does not have panoramic roof, which is brilliant. Otherwise cool video!

• 
  @xiolage21 күн бұрын

  Yeah for some reason the facelift bPS doesn’t even have the option for one from new!

• 
  @knighty698818 күн бұрын

  To save weight of course!? 👍🏻👊🏼🔥

• 
  @ot830921 күн бұрын

  Hello mate, I fit one of these in my 2015 caddy 1.6tdi but the sound only comes out of the passenger side speakers any idea why?

• 
  @xiolage21 күн бұрын

  Not too sure, have you got the correct adapter harness/no damaged wires?

• 
  @Adeyspec21 күн бұрын

  awesome vid man, car was a flying machine! Looking forward to the future updates

• 
  @xiolage21 күн бұрын

  Thanks again for joining mate, had an absolute blast 🏁😎

• 
  @xiolage22 күн бұрын

  Just a quick note; I will be doing an updates/thoughts/debrief as a separate video as this ended up at over an hour long! I have a lot of stuff to discuss and looking forward to filming it all and sharing. Stay tuned, It shouldn't be too long. 👀

• 
  @xiolage16 күн бұрын

  kzread.info/dash/bejne/Y6aVmJOqqpCuY9Y.html - Update video now live!

• 
  @onkarkhot850822 күн бұрын

  What year is your car and what year the ST seats came from?

• 
  @xiolage22 күн бұрын

  My car is a 2013, the seats came from a PFL.. not too sure on the year.

• 
  @t011md9523 күн бұрын

  Have you noticed a ticking noise that increases/decreases (depending on how fast your going) since you have fitted the godspeed front discs? I've also noticed it quietens down/stops the ticking noise when I apply the brakes (in my case) - presumably when the pads are making contact with the disk... I had my discs & pads fitted about 1-2k miles ago roughly, it's still noticeable in my case.

• 
  @xiolage23 күн бұрын

  Yeah this is a trait of any drill/slotted disc as the pad goes over the vents. 😁

• 
  @horiacunea674827 күн бұрын

  Does your car have air con?

• 
  @xiolage27 күн бұрын

  Our van doesn’t, unfortunately.

• 
  @deathwish700528 күн бұрын

  Hello, I have recently decided to please myself with a new car which would be exactly T9 GTI. Unfortunately there is small amount of information on the internet if it comes to reviews. Can you provide some feedback about reliability or how to properly service and maintain this car? I would highly appreciate that!

• 
  @xiolage28 күн бұрын

  I have already got a service video on my channel, but will look into do a review answering those other questions. 😁👍🏼

• 
  @SpiritCrusher89Ай бұрын

  Hey man, what kind of oil dipstick is that? The stock one, as you mentioned, is impossible to read, I'd like to replace it

• 
  @xiolageАй бұрын

  That one is the stock one, it’s awful 😢

• 
  @SpiritCrusher89Ай бұрын

  @@xiolage the one my GTI BPS has is different and it seems even worse than that... Well, I guess I'll try to find a better one! BTW Nice videos, would have liked to buy a blue GTI but I found a black one, still an amazing car, have fun with it on the track!

• 
  @xiolageАй бұрын

  What year is your GTi? Could it be the THP vs PureTech engine difference?

• 
  @SpiritCrusher89Ай бұрын

  @@xiolage mine's 2021, an online search seems to prove my dipstick is the stock one (bloody awful) and yours is probably what the OG owner considered an upgrade, that's why I was asking you... Well, I guess I will have to take it out several times in order to clean the canal a bit before taking an actual reading

• 
  @xiolageАй бұрын

  @SpiritCrusher89 Oh right, yep the 2021 has a PureTech engine which i’ve heard is slightly different. Could involve a different dipstick!

• 
  @griffinvideoprodsАй бұрын

  Hi. I’ve read that the 2014 clock spring had the same part number and the facelift clock spring. The replacement I was looking at simply states clock spring 2012-2018. Can you confirm whether or not the original clock spring should work??

• 
  @xiolageАй бұрын

  Original clock spring will not work. The buttons on the steering wheel will not work on one side.

• 
  @jden2008Ай бұрын

  i have 2012 focus and the first thing i took off is the big not so good looking junk plate at the front of the car i hate those politicians wanna make all cars like big giant plate on the road lucky me im in Michigan we dont have to deal with it❤😂😂😂

• 
  @arti8455Ай бұрын

  I’m a bit late to the party but wrapping the chrome out makes the car look 100x better

• 
  @WashyourmouthhАй бұрын

  wich year is that focus?

• 
  @xiolageАй бұрын

  2013