Пікірлер

• 
  @robgreenhill142624 күн бұрын

  That’s my next job to do. Just changed the automatic box fluid, sump pan and filter

• 
  @mirepoixmatt123 күн бұрын

  How did it go ?

• 
  @robgreenhill142623 күн бұрын

  @@mirepoixmatt1 well after watching countless videos, I got the parts from Powerful uk. , and found the correct gradevoil on Amazon way cheaper than my local factors. I many to remove it without removing either crossmember. You will need a 40 torx head bit in a ratchet spanner , and a hacksaw blade. The end ones are the issue, and just plain fiddly. I live on a hill, so with the car pointing downhill, o had the front end partially on ramps, that gave me more than enough clearance.

• 
  @Mdavied202329 күн бұрын

  SALAG25436A384455 it this your f***cking VIN number

• 
  @ingemec83Ай бұрын

  Excellent video...I bought a new key for my LR3 and could not get it programmed...now I have the Launch Tool and I will program it myself...Thanks!!

• 
  @s3hooliganАй бұрын

  Perfect. I wasn’t sure if pulling the pillar would activate the airbag.

• 
  @mirepoixmatt123 күн бұрын

  But how exciting that would be. I hit a deer that was the size of a pony and my airbag didn’t go off. Which reminds me to film the installation of my eBay fender. Coming soon.

• 
  @michaelnyholm1125Ай бұрын

  You said you were programming 2 keys but you only programmed one. Does the original key count as one?

• 
  @mirepoixmatt123 күн бұрын

  It def counted as one. So put in as many keys as you have to program including the original.

• 
  @fernandoquevedo9344Ай бұрын

  I am in doubt about buying this Launch model or the Ancel LD700, somebody can give me a light wich one is the best please, Thanks a lot

• 
  @mirepoixmatt123 күн бұрын

  I think the best is the gap tool. Who would dispute that ? But for the price of this, it’s not vin locked and does some useful stuff.

• 
  @mJlReplicanT0012 ай бұрын

  Got to appreciate the basic “diagnostic system” inbuilt already , and in a cheeky way too!! 👌🏼👌🏼👌🏼 R56 mini has similar, feel like all cars should have this as a feature . The basics/minimal info accessibility at least.

• 
  @mirepoixmatt123 күн бұрын

  Cheeky is a good word.

• 
  @Big.C2 ай бұрын

  I had my dash light up like a christmas tree ... new battery new alternator and belt .. new stereo ... the steering angle sensor ... now ive bought the gap iid tool as it was none of the above ... ill be mapping in a new set of clocks in the morning ... sadly its not always a twidle with a knob or a battery terminal ... the imstument clusters are famous for bad solder connections ... so far its cost me almost 1000 quid ... wish me luck

• 
  @mirepoixmatt12 ай бұрын

  Did you dump coffee on your ride control module ?

• 
  @Big.C2 ай бұрын

  @@mirepoixmatt1 no it happens when the battery goes or the alternator and you dont fix it ,the weakest point trying to draw power heats up and desolders the post not sure if this is a smart arsed question or not ...im a mechanical engineer who specialises in diesel repairs not a knob twiddler on youtube ....problem solved btw ....new clocks mapped in and mileage updated

• 
  @BobSmith-ui4qu2 ай бұрын

  Tighten then loose,then tighten the loose, back and forth so you will eventually loosen the rust off the threads.

• 
  @mirepoixmatt12 ай бұрын

  Why do that when you can just snap it off like a gorila ?

• 
  @BobSmith-ui4qu2 ай бұрын

  Of course it has to be sae because that what’s the USA uses and so should everyone. Funny.

• 
  @mirepoixmatt123 күн бұрын

  Stupid bolt. Broken or not, at least it’s pretty now.

• 
  @BobSmith-ui4qu2 ай бұрын

  You are funny. Watching you struggle with the simplest things is funny.

• 
  @mirepoixmatt12 ай бұрын

  Thanks, Bob. Suffering for the community - that’s what it’s about.

• 
  @dwayneh69002 ай бұрын

  *Promo SM* ❣️

• 
  @mirepoixmatt123 күн бұрын

  Huh ?

• 
  @Big.C2 ай бұрын

  Tap down the terminals ... they gonslack because they arent on properly whe. Tightened

• 
  @mirepoixmatt123 күн бұрын

  I do enjoy a gentle tap on my terminals.

• 
  @ivanmelnikov62152 ай бұрын

  Thank you so much for the video. How many hours did the hole job of changing the valve gasket take you ?

• 
  @mirepoixmatt12 ай бұрын

  Well, it’s really only took me like 2 hours, but I like to stop, contemplate life, why I purchased this vehicle, second guess life choices, and then start again. It was not complicated - so long as you have plentiful extensions.

• 
  @BP-xe7dw3 ай бұрын

  That happened to me when going through mount Shasta. It was a huge storm and luckily I was able to stop at the parts store and get some clips and clipped back in a stormy conditions.

• 
  @mirepoixmatt123 күн бұрын

  Mount Shasta ?! Did they name the soda after this mountain ?

• 
  @BP-xe7dw23 күн бұрын

  @@mirepoixmatt1 Doggone it. you are right. I just looked it up. LOL I passed through Shasta many times on a motorcycle from Seattle to Joshua Tree.

• 
  @mirepoixmatt123 күн бұрын

  @@BP-xe7dw I was today years old when I learned they named soda after mountains.

• 
  @hedydd23 ай бұрын

  Do not forget the front and rear differentials.

• 
  @mirepoixmatt12 ай бұрын

  Yes.

• 
  @bradfordaudio3 ай бұрын

  Left hand jackstand not supporting the vehicle?

• 
  @mirepoixmatt13 ай бұрын

  Uh oh! Safety police entered the chat.

• 
  @shopdave3 ай бұрын

  Do you remember if the head unit was still flashing light out of the optical port? I have the same symptoms but the optical output is still flashing. everything else totally dead (head unit, screen, underseat dvd rom, rear entertainment etc)

• 
  @mirepoixmatt12 ай бұрын

  The head unit controls everything on the MOST system. It’s likely your radio is indeed dead. The IR may work, but other parts of the radio may have failed. If you want me to pull my radio to check, LMK. Clearly I can disassemble this vehicle in like two minutes.

• 
  @adamzhang63843 ай бұрын

  My current key is not working (something is wrong inside, wrong key signal), do you think I will success program new keys?

• 
  @mirepoixmatt12 ай бұрын

  Having a good working key is necessary to clone, unfortunately. Have you tried re-soldering a new battery into it ?

• 
  @OCMOOMOMO3 ай бұрын

  Do you know the torque spec on the screw?

• 
  @hedydd23 ай бұрын

  Click.

• 
  @mirepoixmatt12 ай бұрын

  Yes.

• 
  @nrl10293 ай бұрын

  I also contacted them and ask if they could add the option to turn off the park sense system and TPMS like the gap tool. Great tutorial I subscribed.

• 
  @mirepoixmatt13 ай бұрын

  I could use this too. Solid idea and thanks for the follow. based on my projections I should have 1000 followers when my rover has 876,000k on it. Wish me luck.

• 
  @nrl10293 ай бұрын

  Yes please do more with system programming functions

• 
  @mirepoixmatt12 ай бұрын

  Word. :)

• 
  @davechristie69883 ай бұрын

  Glad you succeeded. I was surprised though as Ignition on does not mean start engine.

• 
  @mirepoixmatt13 ай бұрын

  Is that true ? After I thought about it I questioned myself.

• 
  @SueDohman3 ай бұрын

  Just don’t drop the ball, like you did the key & then that light. 😏 Good luck tho, for real. And btw…I drop sh¡t like that a good bit also.

• 
  @jamesjudd65774 ай бұрын

  awesome! please do make a follow-up video. this is similar to the ID gap tool?

• 
  @mirepoixmatt13 ай бұрын

  I don’t have a gap tool so I wouldn’t make that statement. For many, the gap tool is a necessity. This is bidirectional like the gap tool, has some key functions specific to rover, and it’s also not vin locked which is nice.

• 
  @macajr4 ай бұрын

  what about calibrating air suspension height! I have Rhino rods and it wont work. Cant find the OG rods either.

• 
  @mirepoixmatt14 ай бұрын

  the Rods shouldn’t need any calibration, I believe. I believe they effectively fool your vehicles height sensors.

• 
  @macajr4 ай бұрын

  Yeah, I know that. I tried calibrating the air suspension with the same scanner you have an I get an error.

• 
  @mirepoixmatt14 ай бұрын

  Got it. Email support. They responded right away which I have to give them credit for.

• 
  @InspirationalJetSki-tf8sx2 ай бұрын

  Hi what type of tool are you using I have the icarsoft lr v1.0 will that access the security section or did I buy the wrong diagnosis tool . I have a few issues I'm trying to solve myself. Please help me

• 
  @rberkel14 ай бұрын

  There is a bolt missing from the EGR valve.

• 
  @mirepoixmatt14 ай бұрын

  Is there ?! #hero. I’ll check it out. thx for comment.

• 
  @LeLilley14 ай бұрын

  II really like that bladder! I just got a bunch of plastic grocery bags and tried to seal off the air filter box tube from the inside of the box. I stuck my plastic smoke tube into the MAF hole and used modeling clay to seal up the extra space in the MAF hole. I think it worked, but not as good as your set up. I think I need to repeat my test! Good luck with your plugs and valve cover gasket project. Thanks for doing this!! Your videos always seem to help me!!

• 
  @mirepoixmatt14 ай бұрын

  Plugging your MAF hole is key brother.

• 
  @zeroxzzmp4 ай бұрын

  What happened your video went black???

• 
  @mirepoixmatt14 ай бұрын

  I suck at editing man. It comes back after 6 long seconds.

• 
  @byulacrosse92254 ай бұрын

  Congratulations on being the only person in the world to have programmed a JLR key with a Launch Creader Elite!🎉❤

• 
  @mirepoixmatt14 ай бұрын

  That is hysterical. I looked carefully at the reviews and there are all brands in the reviews. Seems the Rover owners are far more happy than BMW owners.

• 
  @byulacrosse92254 ай бұрын

  You have given me new hope that I can possibly program a new style FFRR fob. Going to try your ignition on first method.

• 
  @mirepoixmatt13 ай бұрын

  @@byulacrosse9225 You can do it !

• 
  @MIG21rs4 ай бұрын

  👍

• 
  @73SDR4 ай бұрын

  Thanks for the tour. I've been looking at Rovers and am currently considering an LR3 with the V8.

• 
  @mirepoixmatt14 ай бұрын

  Most reliable vehicle I’ve ever owned. Good luck on the hunt.

• 
  @LeLilley14 ай бұрын

  Hmmmm . . . I need to add this to my "to do" list!! You make it look easy enough that I think even I might be able to successfully do this! I am assuming that you know it's full when it over-flows . . .??

• 
  @mirepoixmatt14 ай бұрын

  When it trickles out, assuming the rover is flat, you’re full.

• 
  @hedydd23 ай бұрын

  Best check the operator’s manual just in case a set amount of fluid is demanded that is less than that needed to fill to fill plug level. While this would be unusual, it is not unheard of. Could someone check on this procedure just in case?

• 
  @LeLilley14 ай бұрын

  Thanks for this Matt! I'm pretty sure this is the problem I'm having . . . lean codes on both banks. I think I've "rough handled" everything between the throttle and the air filter and out of ignorance, I could easily have cracked the plastic.

• 
  @mirepoixmatt14 ай бұрын

  Anytime. keep me posted!

• 
  @d34nr2k85 ай бұрын

  It can be done as i have done mine discovery 3

• 
  @JG-ly2ij4 ай бұрын

  Hi What did you do that made it work?

• 
  @mirepoixmatt14 ай бұрын

  It’s time to try again.

• 
  @d34nr2k84 ай бұрын

  @@JG-ly2ij bought an Autel ap200 for £50, replacement key from ebay for £15, got the key cut for £10, then programmed to the car following the instructions on the autel but you must have an already linked key and you can add as many keys as you want to. I did have to replace the battery in the new key after the first year as it was a cheap Chinese battery so bought a Panasonic one like in the original key but apart from that 2-3 years on still going well 👍🏼

• 
  @davechristie69883 ай бұрын

  ​@@d34nr2k8so you didn't use the same diagnostic tool. Yeah that's helpful.

• 
  @jesussalcido3 ай бұрын

  I found two on e-bay Autel MaxiAP AP200H (red) and also Autel MaxiAP AP200 (white) Whish one you got? Thanks in advance!

• 
  @fernandomeneses4415 ай бұрын

  Thanks man, I'm looking for a LR3 V8 in Brazil, but is very hard to find a great car in good condictions.

• 
  @mirepoixmatt14 ай бұрын

  Keep hunting. They’re great vehicles !!

• 
  @stizmatic215 ай бұрын

  Thanks for the guide. What did you do about the dipstick mount? Just driving without it?

• 
  @TracyCorbett6 ай бұрын

  You likely need to select *2* keys to be programmed and start with your already programmed key.

• 
  @mirepoixmatt15 ай бұрын

  I will try this. I’ve been back and forth with support but haven’t made a lot of progress. (Not entirely their fault)

• 
  @lujbav6 ай бұрын

  Hey! Nice content. Can you please share the manual .pdf or link?😊

• 
  @mirepoixmatt14 ай бұрын

  What exactly do you need ??

• 
  @mtridgee116 ай бұрын

  what tires and size are those! trying to find at 19"

• 
  @nicolasdakota34466 ай бұрын

  My radio and ac don't come on sometimes, and no start to. Thealarm system starts blinking

• 
  @mirepoixmatt14 ай бұрын

  Suspicious. Something on the MOST system is failing intermittently perhaps.

• 
  @johnnyquid33506 ай бұрын

  First thing you should do is plug in your GAP Diagnostics IID tool! 👍

• 
  @mirepoixmatt14 ай бұрын

  If I had one, I would. The journey of learning how to diagnose a vehicle will go on without a GAP tool 😂

• 
  @MIG21rs6 ай бұрын

  I have the same problem how did you solve it

• 
  @mirepoixmatt16 ай бұрын

  Hi. I am in touch with the manufacturer and they’ve provided some updated instructions that still have not worked for me. I intend to upload a video when resolved.

• 
  @SueDohman3 ай бұрын

  As long as you have one working key, I believe you can flash a new, second key using the Autel Maxi AP200 diagnostic plug in. They’re about $60 on eBay etc. & work via Bluetooth after plugging into the diagnostic plug under the dash. I was SOL for almost a full year when my only key went missing. No locksmiths within 300 miles of me had the software needed to flash the key I paid $380 for from Land Rover dealership. (Nice of the dealership to inform me they no longer carry the software for 2005 LR3 “after” they sold me the $400 key) Anywho….I eventually found a guy in NYC thru the internet who can do it for $250. You just have to remove the interior fuse box & mail to him. No key necessary. He will also provide one if necessary. It worked like a charm for me. And I was absolutely THRILLED!

• 
  @billwatcher93216 ай бұрын

  No No No !! You switch the coils and see if your misfire moves with the coil or the spark plug is bad. Bench testing is a waist of time. If the misfire moves, you need a coil. If it doesn't move you need a spark plug.

• 
  @mirepoixmatt16 ай бұрын

  This works if you have a scan tool only.

• 
  @arrond3166 ай бұрын

  I had fun watching! My ride leaks oil under the hood like a stuck pig, everything is coated in oil. I picked up the gaskets for my 03 tonight. I’ve never changed valve cover gaskets on any vehicle before. I’ll check out the part2 before I do anything.

• 
  @mirepoixmatt16 ай бұрын

  Those oil leaks give the rover at least 5 more horse power. Thanks for the comment. You got this.

• 
  @jbluesb3southside7 ай бұрын

  Ok great job my 4.0 lr3 leaking driver side bank 1 noticed oil just above the exhaust manifold cylinder closet to driver now hoping they have gasket kit for me appreciate the vid 👍

• 
  @mirepoixmatt17 ай бұрын

  I suspect it will be easier on the 4.0. let me know If I can glance at the shop manual for you.

• 
  @jbluesb3southside7 ай бұрын

  @@mirepoixmatt1 Appreciate ty

• 
  @gordonwedman31798 ай бұрын

  I would have swapped coil 2 into cylinder 1. If the misfire moved to cylinder 1 that would confirm that the coil from cylinder 2 was bad. I think I would have checked the plugs as well.

• 
  @mirepoixmatt18 ай бұрын

  Indeed. Just giving an option for those who can afford a cheap multi meter vs a scanner and can’t see the data. Thank you for commenting!

• 
  @OmarGuz5 ай бұрын

  Do you ever find out what happened to your vehicle? What was the problem?

• 
  @johnbowden36968 ай бұрын

  That bolt set up on the positive terminal clamp is strange. I had a fault I discovered after I bought the car. It was sheared. To replace range Rover only offer full harness for over 200 usd. (2011 RR 5.0 SC) why they don’t offer the domed bolt Assyrian is beyond me! East coast USA .

• 
  @mirepoixmatt18 ай бұрын

  The bolt set up? I think I know what you’re saying, actually.

• 
  @jamesgermain846611 ай бұрын

  You know what? While you're at it, buy another one just so you can have 2 of them

• 
  @mirepoixmatt111 ай бұрын

  I would need at least three to make one good one…

• 
  @yorkshireman702511 ай бұрын

  Lambo engine? You wish. They cheap for reason. They plagued with issues, they knightmare to work on and they can get very expensive