Пікірлер

• 
  @poppytw5834 сағат бұрын

  It’s really beautiful book! Thanks for sharing this amazing art!

• 
  @kriztov2652 күн бұрын

  Great review.

• 
  @ArtisanVaquero3 күн бұрын

  Cool stuff 🎉

• 
  @DarkHorseWorkshop3 күн бұрын

  What Laser do You use? What Laser are you most Excited about?

• 
  @wingednomad84233 күн бұрын

  I've been looking at the XTool D1 Pro. Considered a clicker press but once you have your dies, that's it. You can't modify or change your design and you're stuck paying hundreds of $$ on a new set.

• 
  @shalad49613 күн бұрын

  Why would you dye the back? After use the backs turn shiny and smooth. I don’t want the dye on my hair, personally.

• 
  @DarkHorseWorkshop3 күн бұрын

  You are totally welcome to not dye the back. :)

• 
  @Shotin35mm5 күн бұрын

  I recently got into leather work and I’ve started on the foundations. I’ve been doing it for about a year now and I feel like your content finally gave me the inspiration and self courage to start on more ambitious projects.

• 
  @DarkHorseWorkshop3 күн бұрын

  Good luck! Love to hear that. :)

• 
  @DecoyJayc6 күн бұрын

  Oh, i'm in Vancouver BC!

• 
  @maeveLCurtis8 күн бұрын

  What is the punch you use for the belt ends??

• 
  @DarkHorseWorkshop3 күн бұрын

  A Crafttool Strap End Punch like this one: amzn.to/3zkvtqX

• 
  @Primitive_Peak9 күн бұрын

  Hi there, love the video. What square feet of leather did you use for this project?

• 
  @williamhill158011 күн бұрын

  Just found your channel today, love what you do! About to go on a bench watch of your content. Also I love the way you’re just real and not like forceful with a fake excitement.

• 
  @DarkHorseWorkshop3 күн бұрын

  It's quite difficult to not try and be a bit more fake for the views. I think I'm a bit of a goofball so whenever that shines through that's me. Hahaha. Thanks for watching.

• 
  @emaldonado00113 күн бұрын

  Was looking for a belt to make for my daughter and her friend. This is it. Where did you get the hardware.

• 
  @WvIENS14 күн бұрын

  🙏🙏🙏

• 
  @HoundofWor15 күн бұрын

  Ok what about the outside? Do you put any protection on that?

• 
  @landser314717 күн бұрын

  Your work is very beautiful.

• 
  @backseatadventures729517 күн бұрын

  Awesome 🎉

• 
  @sandragrantke629118 күн бұрын

  Hi, I'm just looking for a laser which will engrave AND cut leather ( up to 4mm ) . Do you thing this will be the right one for me?

• 
  @user-ct3oq5ez8e19 күн бұрын

  I was about to total boat counter top my counters this year. After finding this out I know now I’d be able to touch my drinking horn up at the same time. Dude you just saved me the hassle of continuously bees waxing my horn. Thanks sir

• 
  @maxsmeraldi19 күн бұрын

  Blade is number 7?😊

• 
  @Blackcloverbeliever.22 күн бұрын

  DAMN!!!! I thought he was doing a whole body armor thing but I was honestly really surprised that the end product of gauntlet armor was stupid amazing. I give it: ⭐⭐⭐⭐⭐

• 
  @NotsoGonzo22 күн бұрын

  Hi I may be late to the party but I'm making similar lamellar for steel combat. I'm wondering what to use for the string holding together the plates? I don't want it to wear out and using gutted paracord may fray... please let me know! Great work, once I'm done I'll watch your videos for tips!

• 
  @frankd425323 күн бұрын

  I see these videos and when they use their swivel knife their lines look bold, mine look really thin

• 
  @lokimidknight731923 күн бұрын

  Hey, love this video and concept. There is some real science here. Be proud of what you've made!

• 
  @Momo_Kawashima23 күн бұрын

  Man I'm gonna be the fanciest raider in the whole post-apocalyptic nuclear wasteland

• 
  @sehtzek26 күн бұрын

  I see you tested a lot of diode lasers. Which one is your favorite for cutting leather and why? I have been using an Ortur for a couple years now and I really like what it can do, but I hate what it can't. It is under powered I can't cut the thick leather no matter how many passes I use. I am waffling between the new falcon 2 pro and the X-tool S1. Which one would you prefer. Thanks

• 
  @ingar62926 күн бұрын

  Stop to say anything is Viking. Tell this med fan belt please.

• 
  @anthonygallacher510427 күн бұрын

  I'm sorry you said that the hardware was from Raymond who? I am looking for similar can you please advise.

• 
  @DejvovaVidea27 күн бұрын

  You have Fiebings Resoline how finish?

• 
  @mickwoodney753328 күн бұрын

  slapchop painting your armour, haven't laughed so hard in ages! comedy gold mate, love your work

• 
  @JoZf_GibsonАй бұрын

  Trop de pub …. Dommage

• 
  @tarball2188Ай бұрын

  Do you always need to snip the rivet? why not just buy shorter length rivets? And what tool do you use to snip them?

• 
  @andreashakestad9013Ай бұрын

  My drinking horns got left in the cellar when i lived in my apartment but now i've moved to a house and found out it's a very thick layer of white mold in it. Is there a way to save my horn from this?

• 
  @jaredk6428Ай бұрын

  I really like these type of videos. The thought behind the design I find really cool. Even the "it's cool looking" type comments are fun.

• 
  @BabySquirrelBeadingАй бұрын

  Thank you for this great video 🤓 Got my knock off strap cutter today and what a shit show. Manage to finally get the blade in and and get some practice straps that are usable. Your tips on starting and ending your straps are brilliant. These were the two issues I had. Big hugs from Nova Scotia 🤓

• 
  @user-ss8cv1oy3lАй бұрын

  I made myself a belt! Not as good as yours but cool for me. Thanks!

• 
  @thomashaynie406Ай бұрын

  Would this work for HEMA longsword?

• 
  @OblivionIsatHandАй бұрын

  Man i thought i will find here some easy hobby stuff but this son of a gun isn't a "wannabe hobby guy" he is full professional sh*t - real awsome sh*t!! ...mindblowing Full Respect

• 
  @jameswalker3490Ай бұрын

  Mr. Dark Horse, I love this sporran pattern. It's incredibly user friendly! It has been a life saver since seemingly no one offers these elsewhere on line. WITH THAT BEING SAID, if you ever wanted to design a pattern for the hunting style sporran, I'd be the first to buy it. Thanks for your time!

• 
  @ironmonkey1990Ай бұрын

  If I wanted to put a couple coats of wood finisher on to color the hide before I put it on what would the best way of doing it in regards to letting the hide soak in water and it drying? I’m very new to this but I wanted to use a different color hide

• 
  @x0vaАй бұрын

  i should be studying for tommorrow's history test on ww2...

• 
  @bentoombsАй бұрын

  The Fuckery and find out armor

• 
  @bentoombsАй бұрын

  Very cool. Working on learning light burn. I want to make the black armor that you have in the background some videos. Thanks for the info as always🤙

• 
  @EldarquestАй бұрын

  Can you cut it on the Falcon 2 ?

• 
  @DarkHorseWorkshopАй бұрын

  Too big sadly.

• 
  @Firkraag1Ай бұрын

  you mentioned that you linked what epoxy you're using but I can see no link to that, sad

• 
  @DarkHorseWorkshopАй бұрын

  Fixed!

• 
  @SOSDukecityАй бұрын

  Wife has a sty and doesn't want to go out looking like sloth.. so I'm making her look like one eyed Willy instead

• 
  @TheGreatAK6153Ай бұрын

  Does not show you how to start the stitch.

• 
  @DarkHorseWorkshopАй бұрын

  Put the needle through the hole with thread on it. Once it's through, you in theory have a single piece of thread running through your project with a needle on both ends. That's it.

• 
  @TheCleanistАй бұрын

  wow