Bruce Foster here,I have the same lathe and your video was a perfect inspiration to do the same .I have got to get that metal and make some chips.Thanks
@user-mh9jm6vj1c10 күн бұрын
In a 32 gallon trash can it will give you 20 gallons of hot water because the heater displaces the water.
@MichaelDavis-fu2wd14 күн бұрын
Hello Don. I just bought a house that has these cameras installed. In full disclosure, I dont know anything about security cameras and only have basic knowledge of how to use computers for internet, word and excel. The previous owner left the switch (?) that I assume is how I will connect them to my router. Ive learned that Ill need an NVR. I think the previous owner had the cameras run to an old hard drive in the garage. Any information you can share to someone who knows nothing about how to get these up and running would be appreciated.
@peterfairlie229616 күн бұрын
My parents gave me this exact 150 in one for Xmas 1976 when I was 11. I use to take it to School and me and my friend Ricky would wire up the different projects over the lunch hour. The police siren was the best one from what I remember. The TV show CHIP's was big at that time so we loved it. Ricky was so inspired by all of this he got his parents to buy him the 200 in one kit!
@genevernon316720 күн бұрын
Nice to see you just testing thee water if you will. Just casual riding getting to know your bike and the things that your lowly learn8ng what you can and can't do on it. This far.
@ShiningForce0720 күн бұрын
Nice work to begin with. You can do with forced air to help the combustion eg. from an air blower.
@maxinsano737622 күн бұрын
This video was very helpful. Glad to know it it works. I only wonder will it be stable after many hours of use??
@karaokekid718923 күн бұрын
Where did you get the metal strip from?
@RstifleableАй бұрын
I watched your video and enjoyed it a lot. You sound like you know what you’re doing. With that in mind I have a question. I have an old 1940 drill press that I want to put a 1/2 hp 3 phase motor on. I bought a Transformer to step up the 110 from my garage plug in to 220. Here’s the question: is that all I need? All I have to do is plug the transformer in the wall and the 3 phase motor into the transformer. I also bought a VFD to regulate the rpm’s. Any advice will greatly be appreciated…..
@grantfitch8393Ай бұрын
Thank you so much for these great ideas. I have a 2019 grand caravan and my side doors would just randomly open. After a 300 dollar quote from the dealer I bought some cheap aftermarket’s from Amazon which did not pair with the new grand caravan. So I disassembled them. The aftermarket fob had a plastic tape covering the circuit board that force connected the circuit board to the metal connectors. So I ripped off the tape gently and reattached them on top of the circuit board of my native key. Everything works like a charm now.
@rossi9209Ай бұрын
Are they asure you a good visual field in traffic ???
@user-bl8ph4ye5lАй бұрын
Thank you for taking the time to post a simple get to the point easy to understand video
@jbluezfanАй бұрын
Thanks my 2014 Dodge Caravan Key Fob lock buttons stopped working you are correct on everything you are saying I ordered another fob I think the switch cover most likely will solve the problem using the new one
@RobertMoore-rl5mqАй бұрын
It's all about the dollar. I bought an 2011 grand Cherokee from Port Jeff jeep with a stock radio. I picked up a touch screen radio (plug n Play) And made the mistake of buying the wiring kit from that dealer. Plugged everything in radio didn't work. Then I went back to jeep and the service guy told me the radio has to be programed to the computer. That's BS. And he says it will be 160$ and no guarantee. OH SO IT'S A SCAM? I went against my better judgment and let him do it. Just as I suspected, didn't work. So I went back to the guy who sold me the radio and told him I want to try his wiring harness from his radio. And sure enough it worked. I went back to jeep and with a room full of customers I told the manager you guys took me for 160$ when you sold me a bad wiring harness and you knew programming the thing wasn't going to work. That was the last time I ever went back to that SHITHOLE. Auto dealers ate the biggest thieves EVER!
@kryckan7331Ай бұрын
i love you
@nerfmadeeasyАй бұрын
Used a long, 3/8" width zip-strip as shim & worked well enough. Thank you for the insight!
@stecder2470Ай бұрын
what s the fuze button for?
@misty_mountainАй бұрын
Thank you!
@John-pc8egАй бұрын
We used to own our vehicles. No longer so. They're creating the in for themselves. It's not yours anymore. It's a partnership and these people plan to be along for a free ride as long as you're willing to play along. Your independence is gone. Nonexistent.
@BlackdogADVАй бұрын
I think those are MZS mirrors off Amazon. Problem is they are small and not convex so your field of view tiny.
@giuseppegervasi18202 ай бұрын
sorry i use a super indexing head
@johnyaceyko97752 ай бұрын
Mine looks like everything up to the fridge and table. 37 series.
@grimmreaper63512 ай бұрын
My God! Spare us the tedium of watching every painstaking detail and your applied tool use.
@waltermacpherson36482 ай бұрын
Thank you so much for this video! You helped me out more than you know. I just wanted to let you know the way around the alarm going off when you use the backup key. When you get out of the vehicle manually lock the door before you close it. Hold up the outside door handle while closing the door. Door will be locked without the alarm on.😁👍
@waltermacpherson36482 ай бұрын
They changed the electronic board on the cheap replacement, the button clickers are now on the board itself unfortunately.☹️
@alexandermathar77802 ай бұрын
Trash . Get a 30000 rpm nitro engine and a planetary gearbox . SCREAM !!!!!!
@toddwilkin75062 ай бұрын
Saved me a massive headache thanks for the quick tip.
@brianskellenger93442 ай бұрын
thanks answered my question
@pablobaez92012 ай бұрын
Thank you
@kickedintheballs20002 ай бұрын
Most couplers are Zinc man, be careful welding it.
@rodgraff17822 ай бұрын
Why put cheap $7.00 Chinese bearings in there? How about a good timken, or other American bearing. They are not that expensive. You should be using a press instead of hammering on the shaft. Make it even easier, put the shaft in the freezer overnight, and warm the bearings. They will go on a lot easier. You could have used a small square punch to tap the luck nut loose, rather than chew things up with channel locks. If your going to do that, use a rag to protect them. Good explanation though, for someone who doesn’t have the proper tools.
@eli-kwfmjc-doctrine83132 ай бұрын
Can you run a 220 welder from this with adapter?
@rlb13882 ай бұрын
I had one. Loved it
@bloop68123 ай бұрын
Noticed you had 4 mounting holes on your head stock and ways. Did you drill the fourth hole. I know these laths at least the Chinese versions only come with 3 mounting holes/ bolts for the head stock. I recently purchased the 16 inch lath bed for the mini lathe and it also only came with only 3 mounting holes. Can't figure why there are only 3 mounting holes a fourth hole does not interfere with any function of the lathe or head stock but it would add more stability. Thanks.
@reutilps3 ай бұрын
Formidável, parabéns!
@wk70603 ай бұрын
I bought the G9729 back in 2004. Did many adjustments and a few mods, and this machine is very accurate now. I love it. Had problems with motors early on but have soon replaced. Still keep a set of capacitors on hand.
@harryodum55983 ай бұрын
I’m glad that my 2010 ram has a standard key. I still have problems trying to get the key out when you put it into Park. Everyone I know with a ram. That type of has problems. Dodge really has you over. The barrel with their keys pisses me off I’m sure it pisses everyone else off.
@harryodum55983 ай бұрын
My 2010 ram 4.7 has a regular key column. You put it in Park and the key won’t come out.But ! if you move the car a foot or two and turn the steering wheel a slight bit you can put her down and the key will come out. been doing it for around three years and it’s starting to really piss me off lol. Do not wanna change the whole mechanism .. does anyone else have the same trouble? If so, can you tell me if you solve the problem I would appreciate it.
@dietrichcusseaux27563 ай бұрын
Excellent watch fabulous commentary!👍🏽
@montigobear3 ай бұрын
Most useful. Thanks.
@ricksweetser16833 ай бұрын
How not to do it. Throw the adjusting screws away and there is no need for studs. Get some 6x15 mm bolts to attach the carriage caps and some 1, 2 & 5 thousandths brass or steel shim material and shim to the proper 0.001" clearance.
@romanurbom24253 ай бұрын
Hey man where did you get the mirrors?
@billbailey553 ай бұрын
I bought one a little over a year ago and I already have a bad bearing in the mill head
@stevenwhitmore55653 ай бұрын
I had the rubber part of the impeller come off and cannot remove the brass piece from the shaft. Any suggestions?
@porter58773 ай бұрын
Fall on a rock bed and them handguards aren't saving those mirrors, shame ,I love the look of them but for off road no way are they holding up.
@timh.21374 ай бұрын
Damn it narrate your videos! This is so stupid!
@sureshramkaran59224 ай бұрын
Nice
@SteveHacker4 ай бұрын
Somebody please explain to me why some people find it so necessary to make obnoxious smacking noises with their mouths every few words… 🤦🏻♂️🤦🏻♂️🤦🏻♂️
@richardricks57154 ай бұрын
Your bouncy video made me seasick!
@guloguloguy4 ай бұрын
GREAT DEMO!! LESSONS LEARNED BY MAKING "MISTAKES" ARE SELDOM FORGOTTEN!! WEAR YOUR WELDING LEATHER JACKET, GLOVES, BOOTS, GLASSES, ETC. PERHAPS, SET UP A SHORT SHEET METAL WALL/BARRIER, BETWEEN YOUR LEGS, AND THE CRUCIBLE WORK....OR, KEEP IT IN A SAND FILLED PIT... IN CASE OF A "DROP", OR SPLASHING MOLTEN METAL!...
Пікірлер
Bruce Foster here,I have the same lathe and your video was a perfect inspiration to do the same .I have got to get that metal and make some chips.Thanks
In a 32 gallon trash can it will give you 20 gallons of hot water because the heater displaces the water.
Hello Don. I just bought a house that has these cameras installed. In full disclosure, I dont know anything about security cameras and only have basic knowledge of how to use computers for internet, word and excel. The previous owner left the switch (?) that I assume is how I will connect them to my router. Ive learned that Ill need an NVR. I think the previous owner had the cameras run to an old hard drive in the garage. Any information you can share to someone who knows nothing about how to get these up and running would be appreciated.
My parents gave me this exact 150 in one for Xmas 1976 when I was 11. I use to take it to School and me and my friend Ricky would wire up the different projects over the lunch hour. The police siren was the best one from what I remember. The TV show CHIP's was big at that time so we loved it. Ricky was so inspired by all of this he got his parents to buy him the 200 in one kit!
Nice to see you just testing thee water if you will. Just casual riding getting to know your bike and the things that your lowly learn8ng what you can and can't do on it. This far.
Nice work to begin with. You can do with forced air to help the combustion eg. from an air blower.
This video was very helpful. Glad to know it it works. I only wonder will it be stable after many hours of use??
Where did you get the metal strip from?
I watched your video and enjoyed it a lot. You sound like you know what you’re doing. With that in mind I have a question. I have an old 1940 drill press that I want to put a 1/2 hp 3 phase motor on. I bought a Transformer to step up the 110 from my garage plug in to 220. Here’s the question: is that all I need? All I have to do is plug the transformer in the wall and the 3 phase motor into the transformer. I also bought a VFD to regulate the rpm’s. Any advice will greatly be appreciated…..
Thank you so much for these great ideas. I have a 2019 grand caravan and my side doors would just randomly open. After a 300 dollar quote from the dealer I bought some cheap aftermarket’s from Amazon which did not pair with the new grand caravan. So I disassembled them. The aftermarket fob had a plastic tape covering the circuit board that force connected the circuit board to the metal connectors. So I ripped off the tape gently and reattached them on top of the circuit board of my native key. Everything works like a charm now.
Are they asure you a good visual field in traffic ???
Thank you for taking the time to post a simple get to the point easy to understand video
Thanks my 2014 Dodge Caravan Key Fob lock buttons stopped working you are correct on everything you are saying I ordered another fob I think the switch cover most likely will solve the problem using the new one
It's all about the dollar. I bought an 2011 grand Cherokee from Port Jeff jeep with a stock radio. I picked up a touch screen radio (plug n Play) And made the mistake of buying the wiring kit from that dealer. Plugged everything in radio didn't work. Then I went back to jeep and the service guy told me the radio has to be programed to the computer. That's BS. And he says it will be 160$ and no guarantee. OH SO IT'S A SCAM? I went against my better judgment and let him do it. Just as I suspected, didn't work. So I went back to the guy who sold me the radio and told him I want to try his wiring harness from his radio. And sure enough it worked. I went back to jeep and with a room full of customers I told the manager you guys took me for 160$ when you sold me a bad wiring harness and you knew programming the thing wasn't going to work. That was the last time I ever went back to that SHITHOLE. Auto dealers ate the biggest thieves EVER!
i love you
Used a long, 3/8" width zip-strip as shim & worked well enough. Thank you for the insight!
what s the fuze button for?
Thank you!
We used to own our vehicles. No longer so. They're creating the in for themselves. It's not yours anymore. It's a partnership and these people plan to be along for a free ride as long as you're willing to play along. Your independence is gone. Nonexistent.
I think those are MZS mirrors off Amazon. Problem is they are small and not convex so your field of view tiny.
sorry i use a super indexing head
Mine looks like everything up to the fridge and table. 37 series.
My God! Spare us the tedium of watching every painstaking detail and your applied tool use.
Thank you so much for this video! You helped me out more than you know. I just wanted to let you know the way around the alarm going off when you use the backup key. When you get out of the vehicle manually lock the door before you close it. Hold up the outside door handle while closing the door. Door will be locked without the alarm on.😁👍
They changed the electronic board on the cheap replacement, the button clickers are now on the board itself unfortunately.☹️
Trash . Get a 30000 rpm nitro engine and a planetary gearbox . SCREAM !!!!!!
Saved me a massive headache thanks for the quick tip.
thanks answered my question
Thank you
Most couplers are Zinc man, be careful welding it.
Why put cheap $7.00 Chinese bearings in there? How about a good timken, or other American bearing. They are not that expensive. You should be using a press instead of hammering on the shaft. Make it even easier, put the shaft in the freezer overnight, and warm the bearings. They will go on a lot easier. You could have used a small square punch to tap the luck nut loose, rather than chew things up with channel locks. If your going to do that, use a rag to protect them. Good explanation though, for someone who doesn’t have the proper tools.
Can you run a 220 welder from this with adapter?
I had one. Loved it
Noticed you had 4 mounting holes on your head stock and ways. Did you drill the fourth hole. I know these laths at least the Chinese versions only come with 3 mounting holes/ bolts for the head stock. I recently purchased the 16 inch lath bed for the mini lathe and it also only came with only 3 mounting holes. Can't figure why there are only 3 mounting holes a fourth hole does not interfere with any function of the lathe or head stock but it would add more stability. Thanks.
Formidável, parabéns!
I bought the G9729 back in 2004. Did many adjustments and a few mods, and this machine is very accurate now. I love it. Had problems with motors early on but have soon replaced. Still keep a set of capacitors on hand.
I’m glad that my 2010 ram has a standard key. I still have problems trying to get the key out when you put it into Park. Everyone I know with a ram. That type of has problems. Dodge really has you over. The barrel with their keys pisses me off I’m sure it pisses everyone else off.
My 2010 ram 4.7 has a regular key column. You put it in Park and the key won’t come out.But ! if you move the car a foot or two and turn the steering wheel a slight bit you can put her down and the key will come out. been doing it for around three years and it’s starting to really piss me off lol. Do not wanna change the whole mechanism .. does anyone else have the same trouble? If so, can you tell me if you solve the problem I would appreciate it.
Excellent watch fabulous commentary!👍🏽
Most useful. Thanks.
How not to do it. Throw the adjusting screws away and there is no need for studs. Get some 6x15 mm bolts to attach the carriage caps and some 1, 2 & 5 thousandths brass or steel shim material and shim to the proper 0.001" clearance.
Hey man where did you get the mirrors?
I bought one a little over a year ago and I already have a bad bearing in the mill head
I had the rubber part of the impeller come off and cannot remove the brass piece from the shaft. Any suggestions?
Fall on a rock bed and them handguards aren't saving those mirrors, shame ,I love the look of them but for off road no way are they holding up.
Damn it narrate your videos! This is so stupid!
Nice
Somebody please explain to me why some people find it so necessary to make obnoxious smacking noises with their mouths every few words… 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Your bouncy video made me seasick!
GREAT DEMO!! LESSONS LEARNED BY MAKING "MISTAKES" ARE SELDOM FORGOTTEN!! WEAR YOUR WELDING LEATHER JACKET, GLOVES, BOOTS, GLASSES, ETC. PERHAPS, SET UP A SHORT SHEET METAL WALL/BARRIER, BETWEEN YOUR LEGS, AND THE CRUCIBLE WORK....OR, KEEP IT IN A SAND FILLED PIT... IN CASE OF A "DROP", OR SPLASHING MOLTEN METAL!...
what does the replacement brush do?