I have been playing this silly game of Airsoft for over 17 years, I am dedicated to bringing you reviews of Tactical Gear, Airsoft kit, and all aspects of the BBlarping life. I love interacting with everyone and hope to inform and educate to the best of my ability on this channel.
Пікірлер
Any leads on a eagle h harness adapter I found a after market one but I'm a collector so j really need a eagle industries
@GunpowderNitro www.venturesurplus.com/?s=RRV&post_type=product This is the only ones I have found but they aren't Eagle.
The front strap is for a elastic cord to retain your Nalgene I agree the elastic retention does good by itself
@misfitlife3091 Thanks for that info, I wasn't 100 percent sure what that was for.
Will it work with AR mags as well? DO you think you can double stack the insert in the DOPE and hold 6 AK mags?
@nicklosito1163 theoretically yes, the RAM will hold AR mags as well. I can tell you the repro DOPE flap is a slightly tighter fit with the AK RAM. But these things are fantastic.
It's a copy of a Safariland 578 GLS Pro-Fit holster!
Thank you. I was pretty sure it was a Safariland clone. I just wasn't sure which model.
Do they fog bad with Gasket on?
Yes and no, so these have a venting capability, and when that is able to remain open, it stays pretty well fog free. If you are in a VERY humid environment, they will fog without some sort of decent Anti-Fog. However, these are still one of my favorite eyepro with a gasket because they don't fog as bad as other full seal eye pro I have used.
AVS? Man now i want one.
Yeah, Crye Multicam MBAV plat bags with the AXL AVS Micro harness and AXL advanced Equinox cummerbund.
I wonder how does the avs fit? is it comfortable?
@@onionrings8605 it is extremely comfortable! The AXL upgrade is well worth it.
@@Muddy_Reviews Thanks for your response!
Got these. Play in Iowa which is the seventh most humid state in the US just below Hawaii. These do not fog up! I managed to play all day saturday and never had a fog up.
@postal5342 Thanks for sharing! I have had very little issues with fog with the Echos
I have a pair of tru spec 24/7 expedition pants. Im not a big fan of multicam but am looking for a woodland or dnc pair of pants that do have the adjustability like these. Im not after 100% accuracy to crye, just a cheaper alternative that can adjust to how i like it. Do you think i should get a pair of the krydex’s? Edit: nevermind im just gonna get the emerson woodland g3’s, itll complete my detaforce look, and woodland actually works.
Defeats the point of zippered back panels if they still have all those tuck tabs and still take five minutes to remove and install.
@michaelnyden8056 The tuck tabs are there for added stability and to keep the panel fron flexing about. I have yet to see a system that doesn't have these. You aren't hot swapping your panels in combat while being shot at, and it is far more convenient than weaving pals a pouch through a PALS grid.
@@Muddy_Reviews I can imagine if to are putting minimal weight on it and since it’s Tegris you may not even need to use them
@michaelnyden8056 I have a Platatac Bullock on mine currently and the tabs do come in handy for making it ride better. But I can see your point for sure.
Just picked up a leupold copy from eBay (shipped from china to the uk) 6-24 x 60. Similar to yours. Slapped in into an old sig 522 & taking it to the range tomorrow to see if it will sight in 👍
@mattsmedley.onehandedgamin9029 looking forward to hearing more!
Might as well save up and buy the name brand helmet pads and be more comfortable.
@ivaniuk123 I don't disagree, I like to review Airsoft products and real products especially to compare and contrast.
I have the matrix branded one from evike. The mask passes the seal test
@@rl-762 I have an update for this video coming soon.
New to your channel and enjoying the content. Don’t know if you own a repro mk4 or mk5 placard, but was wondering how this would fit in those. The official Haley triple insert is known to be too big for the repros. Looks like the tricert is more compact so would hope it can fit
@PaowinPandas welcome to the channel and I hope you enjoy the content. My son has an Emerson MK3 or 4 and I can check for you this week.
@@Muddy_Reviews appreciate it! Looking forward to any feedback. Nice to see your reviews are a mix of repro and real steel gear. Bought the wosport grocery bag sometime back after watching your video
Thats awesome man! Glad to hear it helped out, spred the word LOL. Anyway the Lunar insert fit with about a quarter inch sticking out of the Emerson MK4, it was a little tight and made the mags a little difficult to fit all three with the extra tension on the insert. I like to cover both sides for the community at whole and those folks that need to be ballers on a budget.
@@Muddy_Reviews Awesome, thanks for the feedback! I’m wondering why Emerson did not replicate the exact dimensions. I figure it’s not a QC thing, since it’s a widely reported issue for other repro brands as well (eg krydex). Luckily, I was able to hop on a used SS Mk5 since my last comment. Seems like this is one of the instances where the real deal ends up paying off. Now just time to wait for the tricerts to come back in stock!
@@Muddy_Reviews Definitely a baller on a budget here haha. If I could run all real steel gear and support US made gear/innovations, I absolutely would, but it adds up pretty fast. For me, it’s all about picking and choosing. Controversial opinion here, but I figure a lot of repro gear is good enough. Just to have to do some research. Have yet to really see any repro gear fail after 7 years of active duty on the airsoft field. The wosport grocery pouch for me was one of those ‘good enough purchases.’ Another reviewer even claimed it was NIR compliant! I do have to say though, that I am much more proud to own the real deal!
How did you take off the orange tip?
@@militaryfry6314 blowtorch, table vice, and pliers.
will a heat gun work?
@militaryfry6314 possibly, but I had to really get that thing HOT to break the glue.
is this the same as a FMA MT helmet?
Short answer no but sort of. Long answer is this is a licensed product from PTS of the MTEK Flux helmet. The finish on the PTS lid is more in line with a real helmet. I wasn't even aware of the FMA but now I need one to compare them.
Idk man, they work good and they don’t feel cheap. I’ve got 2 and have been running them for a year, no problems with them and I run real steel so there is more wear and tear with that. All around a good product and I do recommend them for the price
TMs are built in a factory .. bad analogy
@marklazio11 fine analogy, it was a little clumsy...but it is not TM spec.
How would someone know with gatorz glasses will fit properly? Returned the boxsters cause they were too small.
There should be a fitment guide on their website, but the Gatorz Magnums are a metal frame and can be formed to fit better.
I was just curious how do you remove the rear iron sight?
You unscrew it and slide it off to the rear. You will need to move the charging handle when you do.
How much did it cost you for the entire FGNE kit?
The entire kit as in PC, Belt kit, Uniforms, and gun? Or just the PC setup?
@@Muddy_Reviews The entire kit as in PC, belt kit, uniforms, and gun
I can't give you a complete itemized price list, but all in close to 3700$. The uniform was purchased in Euro while in Spain and was around 250$ for Spanish Marines Desert cammies and combat shirt. Helmet was completely built out with real components. The Opscore Worm dial Lux liner was 200$ by itself. The entire helmet is easily 300+ for the entire build. PC was a little under 400$ and with all of the pouches, it was close to 800$. The gun was used and was around 250$ with the light, PEQ, AFG and Eotech I am in for close to 700$, mags I am in for about 160$, the entire belt kit was a little over 300$ and the pistol and light around 225$. This is an estimate and could easily fluctuate a few hundred dollars to the left or right. Now keep in mind this was slowly built out from around 2019-2021, and it still isn't fully done. I also didn't cut too many corners and used mostly real kit, and the only repro kit in the entire thing is the Opscore shell. Ohhh, I forgot about the Altama Maritime assault boots as well...those were around 100$.
Id Just buy those guys off ali, They are literally $10 there lol. Just got to wait for the shipping
Time had priority so Amazon it was LOL...yeah Ali can be a good source for repro kit if you aren't in a rush.
These are my go to boots!
Thesenhave been fantastic! Not my favorite in the dead of summer here in Texas but fall through spring they are money.
@@Muddy_Reviews totally get that. They could breathe a little better in mid summer no doubt. What do you wear in the summer?
@@ROOSTER-ql5fs I alternate between Altama Maritime assaults and non waterproof Solomons
@@Muddy_Reviews I love the look of Solomon’s but my feet are too fat 😂 I’ll definitely check out the others though!
@ROOSTER-ql5fs yeah I think mine are too narrow especially now that I have been wearing Keens.
Russia, China, North Korea and Iran know they have to speed things up before Trump gets in office. I think they are going to jump Biden's ass giving him an excuse to declare martial law and suspend the election. Meanwhile they will continue to pummel us into submission by using that old tool Reagan used to bust the Soviet Union by making us spend money to defend ourselves until were completly broke.
Out of your entire list the only Country we really have any tangible threat from is China, North Korea isn't going to have much pull ouside of the Korean Peninsula, Russia is struggling to wage a war and supply it in a country that is literally next door, and Iran is a regional actor at best.
Awesome! Thanks for the info
Absolutely.
Holly Warrior EXPS3...fits even better! Sight picture is 1000 times better and cleaner, than with those plastic protectors that the Holly Warrior sights come...especially when looking through a magnifier!
You put one of these on a Holy Warrior?
@@Muddy_Reviews Yeap, and it has even better fit! Will send you some photos on your IG
Saw the DM on IG before this LOL. Fantastic build my dude and yeah it really did fit nice on the Holy Warrior!
The velcro is for the side armour that they make
Didn't know that and I thank you for the insight and information!
What millimeter screw is used for 3 hole mounting on a ACH, like a high cut modded one for example. I looked around and it appears to be 16mm screws for this particular mount. Mines only came with the single hole screw and mounting washer.
not sure but this is a link to what should be the screws you need. tnvc.com/shop/norotos-3-screw-replacement-kit/
Thats dope. I like the way you mount it on the belt.
Appreciate it. It really is a creative way to mount your kit and makes it way easier to swap your kit around.
Kywi inserts from esstac are the best
They really are great.
I replaced most of my belt and carrier with kywis, they are great.
I'm slowly headed that way. My only issue with replacing my ready mag pouch on most of my rigs with a single KYWI mag pouch is they are solidly only for AR magazines.
also question for this replica, would it fit on a 22 mm rail? this ones window looks way more cleaner on the video than the previous replica
Like the AK fire this will probably not fit on an offspec rail. The Picatinny mount is very tight.
do you think that this specific replica would fit onto a 22mm rail? Because in description it says 20mm and im some people say the 20mm attachments fit on the 22mm rail and some say that they dont
These will probably not fit on an offspec rail. The Picatinny mount is very tight.
Put shock cord through the hole in the zipper and the hole in the D rings. That plastic ring by the zipper that’s what I did to stop zipper creep
That's a great idea, and thanks for confirming my suspension that zipper creep would occur.
@@Muddy_Reviews no problem buddy!
I was just looking at these, wondering if you had a review out. Now its here!
Been running these for a few months now and they are fantastic.
How long does the battery last?
Varies on how long it is on, but so far it hasn't needed a battery changed. If you forget to turn it off or it inadvertently is turned on it will kill the battery in a day or so.
Man cant take it off ..ive seen your instructions how to remove it..should i use force pulling it out? what do you mean by outboard?
Turning away from you.
Hope the conversation over DM helped.
Nice!!! thank you 🤙
You are welcome! Hope that helped.
Just bought these on your recommendation for my ATS Tactical Aegis plate carrier and I’m stoked to see them in action. Never realized how little stock padding there was from the factory… Thanks for your guidance!
You are absolutely welcome! I am still running these and have a Ranger Green set and will be getting a Coyote set.
They feed great but I have 10 of those and none come out easy like yours when it comes to swich capacity....I've tried everything they are stuck. Same whit my friends 😅😅
Sorry to hear that man, biggest issue with Airsoft at times.
Obviously operator error. Check your ht.
Nope, not operator error, If the radio was in a radio wing or radio pouch that didn't come up and over the knob it would turn off if it was bumped.
What is the radio holder you have on the front ?
That is actually a holster from Vertx.
@@Muddy_Reviews thanks for the quick response !
@@Lwikfo no worries!
could this be slapped on a crye jpc 2.0?
Not sure but I will check for you.
@@Muddy_Reviewsyeah keep me updated on that too
@@Thatguy21110 kzread.infolcj9hFTEgA8?si=s3VtSNwLxIxChs5M Check this out!
Do they still have the eotech marlins on it 6 months later?
That I don't know for certain, but I would assume so. All the images on Amazon show no trades, but that was the same way when I ordered mine.
@@Muddy_Reviews perfect thank you. I meant to say markings haha.
@@codymelvin5633 I was tracking LOL.
Thanks a bunch!
You're welcome!
Thanks for all the content. Not as high speed but have you thought about kzread.info/dash/bejne/ZKRokpWbkpqulco.html&ab_channel=SHAWCONCEPTS%2CLLC. ? lets you access the stuff on your back without a buddy/taking the plate bags off and works really well for me. Its also nice being able to bin it off if needed.
Holy warrior eotechs arnt to shabbby i cna see the reticle in the sunkight and i habe there vortex and sig romeo t8 halo sights
That is good to know, my Holy Warrior 553 I reviewed was very nice.
Do you think you could fit an Acetech tracer unit in there?
The version I have, no. I can not get it to open so you would want something like the Airsoft Artisan SIG suppressor.