Our personal perspective of Contributing to creativity. We are the creators of the OXI One MIDI/CV sequencer and the Coral polyphonic and multitimbral eurorack module. Find tutorials, demos, and jams for our products here! oxiinstruments.com/
Why can't we hold a note step in multimode sequencer view (tapping the oct knob) and turn VEL, OCT, GATE and MOD like in a normal mono track? Why is it different? It's really hard to program notes without being able to shift the notes up and down one octave. And when do do manage to get a note an octave higher by turning that offset knob, its completely out of view! So then I need to guess where the notes an octave down are! I don't understand why it isn't a simple copy of the normal note input view.
@rayderrich3 күн бұрын
The problem with the OXI One is that after a minute or 2 into this video I started to adventure in a different direction already and by the time your explanation was over I almost finished a new jam. This is fun!
@oxiinstruments3 күн бұрын
Haha that was a fun comment! You can probably go directly to advanced tutorials!! 😄
@AndrewFMRG5 күн бұрын
Are you sequencing the Digitakt pattern on the OXI?
@AThousandDetails5 күн бұрын
the sequencer number blinking is a multitrack, you can see there the kick pattern ;)
@dylangadwa31196 күн бұрын
Fantastico!
@krazywabbit6 күн бұрын
my ears thank you. stay safe.
@zpurpz6 күн бұрын
Can’t wait for the next oneee
@dreamsaremaps7 күн бұрын
Been using the oxi for a while and have read the manual several times, and I still found something new in this video. Please keep them coming! Subbed and liked!
@bwest62757 күн бұрын
Amazing work on these tutorials guys 👏👍 thank you 👍
@bjamminsincebirth34948 күн бұрын
This is awesome and amazing! Please get these devices in stores with payment plans. Zzounds and American Musical Supply etc
@bjamminsincebirth34948 күн бұрын
Will you ever get this device to Zzounds and American Music Supply?
@nilskozstum82568 күн бұрын
Two things to add, probably already covered elsewhere: using the shift + sequencer button to set a reset time really helps to keep different length tracks a bit more predictable. Also setting up the play button in config>performance as a reset helps to get everything back together after changing track lengths or divisions while the sequencer is running.
@uly19818 күн бұрын
+1 i'd also like to see an option to copy a single track/row so you can build melodic fugue sequences more easily in multitrack mode or maybe even have a whole separate fugue-sequencer mode
@saggydogs8 күн бұрын
Love it! You are helping me learn!
@Bobo9 күн бұрын
Great video! Thank you ☺️
@ChurBoBaggins9 күн бұрын
tnx these tutorial vids are great, please make more! the oxi is such a nice unit :)
@SvenFx-229 күн бұрын
Much needed video. Thank you 🙏. Please keep them coming. Also is there a reason it’s zoomed out so far? So much unused screen real estate. Still great video. Thank you
@ghostinplainsight48038 күн бұрын
Looks good on a desktop. Easy to see the controls, screen and the interaction with the Digitakt.
@Molluszk9 күн бұрын
May I ask you what is the sound source? 1:33 Thank you!
@oxiinstruments9 күн бұрын
u-he Diva!
@ioannisinnaoi13 күн бұрын
Thank you so much guys!
@InstantlyDistant15 күн бұрын
I can’t believe how many thoughtful and varied features this device has for everyone’s varied use cases, bravo
@ColeDano17 күн бұрын
I just bought an OXI One, it's my first stand alone sequencer. Nothing against this video, but as a new comer, the playlist is very frustrating as videos are just in random order. Hard to know where to start and just get a decent overview of the Oxi One.
@oxiinstruments14 күн бұрын
Hey Cole, we have just rearranged the playlist. Please let us know if it's more helpful now!
@ColeDano14 күн бұрын
@@oxiinstruments much more and wow, didn't expect that, and especially not so fast. Thanks!
@oxiinstruments13 күн бұрын
@@ColeDano thanks! it was helpful feedback for us!
@raneflewit625018 күн бұрын
whats your patch cable？the purple one
@oxiinstruments18 күн бұрын
they are our OXI Glows! you can find them in our shop or in some retailers!
@djestroe18 күн бұрын
This was so welcome! Even with reading the manual very intensely I missed things that were being demonstrated in the video. Thank you! ❤
@toffchunks20 күн бұрын
TOPTOPTOP thks for all as usual)))))^
@OoraMusic21 күн бұрын
great one!
@Claidheambmor21 күн бұрын
Brilliant machine, great tutorial. Never played anything so flexible and fun.
@OtisKanno21 күн бұрын
This was extremely helpful. These in depth videos are gold
@SvenFx-2222 күн бұрын
Good video. Need more like this. Also should be longer and more step by step in depth. So many features that change all the time and most videos are updated. Need in depth basic setup and useage videos. Then just more videos for updates. There is no good basic video yet. The Liam videos goes off on tangents about generative and skips the setup and basic uses. More of a fan video. Not a tutorial
@SvenFx-2222 күн бұрын
Please make more videos exactly like this. Great video thank you
@SvenFx-2222 күн бұрын
Thank you for this video. Please make more like this. I’m depth step by step. I’m having such a hard time learning this device. These videos are Much needed
@lgproductionsintechno22 күн бұрын
Hello Manuel 😊
@alexanderheppening22 күн бұрын
This sequencer is a dream come true. Always wanted to do music live streams without having to prepare stuff. Now I can do everything on the fly without a headache. Also love the new features coming in ... the workflow totally works for me. Thanks Oxi.
@oxiinstruments22 күн бұрын
Thank you, Appreciate it!
@Bobo22 күн бұрын
Very nice and helpful tutorial. Just what I needed to understand chord mode better 😄
@oxiinstruments22 күн бұрын
Thank you!!
@waddy70722 күн бұрын
Blown away by the depth and power of this thing, and the musicality of the results, I just worry about the cognitive load it’s the reason I prefer the Polyend play to Deluge, less is more. Looks like I’m gonna need to RTFM!
@drewmovie22 күн бұрын
i love this device... it really is a swiss army knife.... i love all the updates keep them coming !
@Molluszk24 күн бұрын
what is the sound source? thx
@oxiinstruments24 күн бұрын
OXI Coral !😊
@MarianoPerez26 күн бұрын
Any plans to make each track in the multitrack mode polyphonic?
@oxiinstruments22 күн бұрын
Not currently supported in this hardware. Sorry!
@williamwallace650829 күн бұрын
Bought one, really poor ui. Selling it. Unused
@els1fАй бұрын
Can you assign each voice in the chord to it's own cv output?! I've been doing that with other things and I always have to break the chords into monophonic lines which is cool and makes interesting stuff sometimes, but this would be SO much faster and more fun!
@oxiinstruments27 күн бұрын
you can assign several CV's to different voices. Voice 1, 2, 3 up to 8.
@mark35miАй бұрын
Sounds Fab!!! Huge oxi fan! Your ongoing product support and evolutionary expansion is epic.
@PerceptesАй бұрын
Not sure I understood the user chords part. It sounded like it's just a preset slot for an existing combination of chord type + inversion + spread. Is there a way to put a completely custom chord where you specify the exact pitches, to support chords from outside the diatonic key without resorting to poly mode?
@oxiinstrumentsАй бұрын
Fully custom chords not possible sorry
@gregwalters4656Ай бұрын
It would be awesome if you could modulate the global root note in the mod matrix for changing key.
@oxiinstrumentsАй бұрын
You can for sure! And also the pitch of notes individually! Both options are different!
@gregwalters4656Ай бұрын
@@oxiinstruments How do you do this? Never been able to figure it out
@gregwalters4656Ай бұрын
Is there a resource you can point me towards so I can achieve this? I can't find it in the manual and the only way I could see from reading discord is to go from the cv out back to the cv input and control the root note of the sequencer track via the external mod matrix. If there is an easier way I'd love to know how
@King_BubbuАй бұрын
I love my Oxi One, but I would like more tracks, have you ever thought about a double assignment where you have 8 tracks, is that possible?
@oxiinstrumentsАй бұрын
Unfortunately not in this hardware .
@RadekPilichАй бұрын
actually for every pattern, you can set different sequencer type, midi channel, program change.... so it might not be as straightforward as having 8 sequencers, but you can definitely sequence more than 4 instruments unless you want them play all at the same time.
@jonathanyoung6397Ай бұрын
This was a really clear tutorial, thank you! Chord mode is really powerful and I’ve been enjoying experimenting with it. The auto voicing slightly blew my mind at first! One thing I am confused about is that I don’t understand what is meant by open chord in the chord type? I know what inversions are but what are open chords in this context please?
@oskarorarngrimsson2812Ай бұрын
Great video 🎉
@bwest6275Ай бұрын
Amazing work OXI team, these video tutorials are GREATLY appreciated 👍
@macaronafterpartyАй бұрын
I love that theres almost every chord available but it really would benefit from a chord mode that had pre arranged chord combinations similar to Roland J-6 or Scaler 2. This takes way too much effort to get an interesting progression as it stands.
@tendingtropic7778Ай бұрын
or like NDLR you mean?
@macaronafterpartyАй бұрын
@@tendingtropic7778 Yes something like that. I imagine a mode where each row (or column) has styled progressions to work with so that people like myself can get an interesting progression quickly and move on. Again the J-6 is a great example having over 100 chord sets to explore. I've tried sending midi from my J-6 over to the Oxi however it doesn't record midi the way I expect it to and becomes more of a hassle than anything.
@OttoMildeАй бұрын
I think the Oxi One has a perfect level of "pre-arranged" parameters. You have all the chords in the world but you have to listen and see 4:07 what combinations work for you.
@tendingtropic7778Ай бұрын
@@OttoMilde and how do you get chord from the keyboard mode in to the sequence?
@doubleohdutch2108Ай бұрын
That’s what music theory is for. Circle of fifths, major, minor suspended, inversions. No need to study for years but you need the basics. There are some good vids on youtube on the topic.
@giominor88Ай бұрын
For the love of god, I cannot make it work. Works fine if I use the TRS midi to the midi input of the Syntakt but it will just not work with USB!
@oxiinstrumentsАй бұрын
what adaptor are you using?
@giominor88Ай бұрын
@@oxiinstruments Hi. I use an adaptor from Anker (Anker 332 USB-C Hub 5-in-1), model A8355.
@oxiinstrumentsАй бұрын
@@giominor88 HUBS are not supported!
@giominor88Ай бұрын
@@oxiinstruments Hi, I am puzzled. Isn't the one you use a hub? If not, what should I look for?
@oxiinstrumentsАй бұрын
@@giominor88 you have a pretty long list of supported adaptors in the manual!
@JazzyFunkaHolicАй бұрын
When connecting this to ableton AND external gear combined, what would be a good way to connect it so I can use the max amount of my (digital and analog) synths / which cables are important? There is this Oxi One splitter in the video which gives 48 midi channels, but I wonder if I can use many more synths at the same time with this. A mono (sometimes half modular) synth would take one midi/cv channel which means there is lots of room for them, but could I limit the channels of a digital or analog poly synth to less voices so I am able to play way more synths together? What would be the necessary setup? USB Midi to the 48 channel splitter - 3 analog synths that have midi thru connected + one midi thru for even more. Can I also use the other Usb-c port to my windows computer for controlling Ableton devices (Can I take here also advantage of the 48 channels or do I need to use 1-32) or is it better to connect the interface with the oxi splitter. I try to plan to implement this into my studio but Im not so sure about how I need to connect everything :/ Setup is Ableton, Launchcontrol for Ableton Parameters, Digitakt (thinking about using this parallel to the oxi one as the drum station but with sync to the oxi/ableton), digitone, novation impulse, microfreak, 0 coast (could make use of the midi trs i think), td-3, quadrantid swarm, lyra 8. I am a bit overwhelmed with the possibilities of the oxi and hope to make the best out of my setup so every piece of gear can talk to the oxi one. Another question: The Page on thomann says 16 Pattern per Sequence. Does that mean that I have only 4 sequences and if I connect for example 6 mono synths to Sequence 1 they all share the same sequence length? how variable can I tune them? I dont really understand the concept of these sequences fully and how many unique voices with unique characteristics are possible :/
@chilp9759Ай бұрын
Is this mode limited to 16-steps maximum?
@oxiinstrumentsАй бұрын
16 steps for every single parameter. But the idea is that Since they are decoupled you can get very comples results, melodic ideas which repeat every hundreds of steps. You only have to change length, speed or direction.
Пікірлер
Manuel you are a certified genius, thank you.
Why can't we hold a note step in multimode sequencer view (tapping the oct knob) and turn VEL, OCT, GATE and MOD like in a normal mono track? Why is it different? It's really hard to program notes without being able to shift the notes up and down one octave. And when do do manage to get a note an octave higher by turning that offset knob, its completely out of view! So then I need to guess where the notes an octave down are! I don't understand why it isn't a simple copy of the normal note input view.
The problem with the OXI One is that after a minute or 2 into this video I started to adventure in a different direction already and by the time your explanation was over I almost finished a new jam. This is fun!
Haha that was a fun comment! You can probably go directly to advanced tutorials!! 😄
Are you sequencing the Digitakt pattern on the OXI?
the sequencer number blinking is a multitrack, you can see there the kick pattern ;)
Fantastico!
my ears thank you. stay safe.
Can’t wait for the next oneee
Been using the oxi for a while and have read the manual several times, and I still found something new in this video. Please keep them coming! Subbed and liked!
Amazing work on these tutorials guys 👏👍 thank you 👍
This is awesome and amazing! Please get these devices in stores with payment plans. Zzounds and American Musical Supply etc
Will you ever get this device to Zzounds and American Music Supply?
Two things to add, probably already covered elsewhere: using the shift + sequencer button to set a reset time really helps to keep different length tracks a bit more predictable. Also setting up the play button in config>performance as a reset helps to get everything back together after changing track lengths or divisions while the sequencer is running.
+1 i'd also like to see an option to copy a single track/row so you can build melodic fugue sequences more easily in multitrack mode or maybe even have a whole separate fugue-sequencer mode
Love it! You are helping me learn!
Great video! Thank you ☺️
tnx these tutorial vids are great, please make more! the oxi is such a nice unit :)
Much needed video. Thank you 🙏. Please keep them coming. Also is there a reason it’s zoomed out so far? So much unused screen real estate. Still great video. Thank you
Looks good on a desktop. Easy to see the controls, screen and the interaction with the Digitakt.
May I ask you what is the sound source? 1:33 Thank you!
u-he Diva!
Thank you so much guys!
I can’t believe how many thoughtful and varied features this device has for everyone’s varied use cases, bravo
I just bought an OXI One, it's my first stand alone sequencer. Nothing against this video, but as a new comer, the playlist is very frustrating as videos are just in random order. Hard to know where to start and just get a decent overview of the Oxi One.
Hey Cole, we have just rearranged the playlist. Please let us know if it's more helpful now!
@@oxiinstruments much more and wow, didn't expect that, and especially not so fast. Thanks!
@@ColeDano thanks! it was helpful feedback for us!
whats your patch cable？the purple one
they are our OXI Glows! you can find them in our shop or in some retailers!
This was so welcome! Even with reading the manual very intensely I missed things that were being demonstrated in the video. Thank you! ❤
TOPTOPTOP thks for all as usual)))))^
great one!
Brilliant machine, great tutorial. Never played anything so flexible and fun.
This was extremely helpful. These in depth videos are gold
Good video. Need more like this. Also should be longer and more step by step in depth. So many features that change all the time and most videos are updated. Need in depth basic setup and useage videos. Then just more videos for updates. There is no good basic video yet. The Liam videos goes off on tangents about generative and skips the setup and basic uses. More of a fan video. Not a tutorial
Please make more videos exactly like this. Great video thank you
Thank you for this video. Please make more like this. I’m depth step by step. I’m having such a hard time learning this device. These videos are Much needed
Hello Manuel 😊
This sequencer is a dream come true. Always wanted to do music live streams without having to prepare stuff. Now I can do everything on the fly without a headache. Also love the new features coming in ... the workflow totally works for me. Thanks Oxi.
Thank you, Appreciate it!
Very nice and helpful tutorial. Just what I needed to understand chord mode better 😄
Thank you!!
Blown away by the depth and power of this thing, and the musicality of the results, I just worry about the cognitive load it’s the reason I prefer the Polyend play to Deluge, less is more. Looks like I’m gonna need to RTFM!
i love this device... it really is a swiss army knife.... i love all the updates keep them coming !
what is the sound source? thx
OXI Coral !😊
Any plans to make each track in the multitrack mode polyphonic?
Not currently supported in this hardware. Sorry!
Bought one, really poor ui. Selling it. Unused
Can you assign each voice in the chord to it's own cv output?! I've been doing that with other things and I always have to break the chords into monophonic lines which is cool and makes interesting stuff sometimes, but this would be SO much faster and more fun!
you can assign several CV's to different voices. Voice 1, 2, 3 up to 8.
Sounds Fab!!! Huge oxi fan! Your ongoing product support and evolutionary expansion is epic.
Not sure I understood the user chords part. It sounded like it's just a preset slot for an existing combination of chord type + inversion + spread. Is there a way to put a completely custom chord where you specify the exact pitches, to support chords from outside the diatonic key without resorting to poly mode?
Fully custom chords not possible sorry
It would be awesome if you could modulate the global root note in the mod matrix for changing key.
You can for sure! And also the pitch of notes individually! Both options are different!
@@oxiinstruments How do you do this? Never been able to figure it out
Is there a resource you can point me towards so I can achieve this? I can't find it in the manual and the only way I could see from reading discord is to go from the cv out back to the cv input and control the root note of the sequencer track via the external mod matrix. If there is an easier way I'd love to know how
I love my Oxi One, but I would like more tracks, have you ever thought about a double assignment where you have 8 tracks, is that possible?
Unfortunately not in this hardware .
actually for every pattern, you can set different sequencer type, midi channel, program change.... so it might not be as straightforward as having 8 sequencers, but you can definitely sequence more than 4 instruments unless you want them play all at the same time.
This was a really clear tutorial, thank you! Chord mode is really powerful and I’ve been enjoying experimenting with it. The auto voicing slightly blew my mind at first! One thing I am confused about is that I don’t understand what is meant by open chord in the chord type? I know what inversions are but what are open chords in this context please?
Great video 🎉
Amazing work OXI team, these video tutorials are GREATLY appreciated 👍
I love that theres almost every chord available but it really would benefit from a chord mode that had pre arranged chord combinations similar to Roland J-6 or Scaler 2. This takes way too much effort to get an interesting progression as it stands.
or like NDLR you mean?
@@tendingtropic7778 Yes something like that. I imagine a mode where each row (or column) has styled progressions to work with so that people like myself can get an interesting progression quickly and move on. Again the J-6 is a great example having over 100 chord sets to explore. I've tried sending midi from my J-6 over to the Oxi however it doesn't record midi the way I expect it to and becomes more of a hassle than anything.
I think the Oxi One has a perfect level of "pre-arranged" parameters. You have all the chords in the world but you have to listen and see 4:07 what combinations work for you.
@@OttoMilde and how do you get chord from the keyboard mode in to the sequence?
That’s what music theory is for. Circle of fifths, major, minor suspended, inversions. No need to study for years but you need the basics. There are some good vids on youtube on the topic.
For the love of god, I cannot make it work. Works fine if I use the TRS midi to the midi input of the Syntakt but it will just not work with USB!
what adaptor are you using?
@@oxiinstruments Hi. I use an adaptor from Anker (Anker 332 USB-C Hub 5-in-1), model A8355.
@@giominor88 HUBS are not supported!
@@oxiinstruments Hi, I am puzzled. Isn't the one you use a hub? If not, what should I look for?
@@giominor88 you have a pretty long list of supported adaptors in the manual!
When connecting this to ableton AND external gear combined, what would be a good way to connect it so I can use the max amount of my (digital and analog) synths / which cables are important? There is this Oxi One splitter in the video which gives 48 midi channels, but I wonder if I can use many more synths at the same time with this. A mono (sometimes half modular) synth would take one midi/cv channel which means there is lots of room for them, but could I limit the channels of a digital or analog poly synth to less voices so I am able to play way more synths together? What would be the necessary setup? USB Midi to the 48 channel splitter - 3 analog synths that have midi thru connected + one midi thru for even more. Can I also use the other Usb-c port to my windows computer for controlling Ableton devices (Can I take here also advantage of the 48 channels or do I need to use 1-32) or is it better to connect the interface with the oxi splitter. I try to plan to implement this into my studio but Im not so sure about how I need to connect everything :/ Setup is Ableton, Launchcontrol for Ableton Parameters, Digitakt (thinking about using this parallel to the oxi one as the drum station but with sync to the oxi/ableton), digitone, novation impulse, microfreak, 0 coast (could make use of the midi trs i think), td-3, quadrantid swarm, lyra 8. I am a bit overwhelmed with the possibilities of the oxi and hope to make the best out of my setup so every piece of gear can talk to the oxi one. Another question: The Page on thomann says 16 Pattern per Sequence. Does that mean that I have only 4 sequences and if I connect for example 6 mono synths to Sequence 1 they all share the same sequence length? how variable can I tune them? I dont really understand the concept of these sequences fully and how many unique voices with unique characteristics are possible :/
Is this mode limited to 16-steps maximum?
16 steps for every single parameter. But the idea is that Since they are decoupled you can get very comples results, melodic ideas which repeat every hundreds of steps. You only have to change length, speed or direction.