Jeeps, trucks, cars, & engines. Simple and detailed how to videos, complex and vague how to videos, and whatever else is making noise down yonder in the shop.
Ya girl revved it like you're supposed to, respect.
@brianalto92311 сағат бұрын
Thanks for the video. Makes me feel more confident. In replacing mine.
@jamesj546914 сағат бұрын
It's lowered on stock bolts??
@JeepinJimmy14 сағат бұрын
@@jamesj5469 yeah man you know it
@badazz296915 сағат бұрын
To all you r8, civic, lambo, and gtr guys, this is what a TRUE sports car sounds like. It doesn't sound like some ragged out piece of shit.
@michaelm338121 сағат бұрын
It does sound good. You make everything look so easy. It wouldn't be that simple if I attempted it.
@hummingcatfish21 сағат бұрын
My guy can sing!
@JeepinJimmy20 сағат бұрын
😂😂no.
@colink2967Күн бұрын
Everybody thinks European v8s sound exotic but don’t realize how insane an American v8 with a little more encouragement to move the air can sound
@SBSanChillКүн бұрын
“Sorted by low to high of course” one day i hope im rich enough to sort by high to low 😭
@JeepinJimmyКүн бұрын
Me too buddy😂
@ruthless7260Күн бұрын
Where’s the headers and x pipe from the old setup?
@JeepinJimmyКүн бұрын
Probably gonna throw it up on marketplace
@KleanShotsКүн бұрын
Love the C5 content
@InternetChuckКүн бұрын
Hell yeah brother
@JeepinJimmyКүн бұрын
Brother!
@CsabaPandiКүн бұрын
Hello c5 brother !!! Cheers from HUNGARY !!!
@JeepinJimmyКүн бұрын
Right on!!
@christhomas93002 күн бұрын
Very detailed. Thank you!. FYI - Petroleum jelly will degrade rubber over time causing it to harden and crack, a silicon grease is a better option for lubricating o-rings
@JeepinJimmy2 күн бұрын
Thanks! Right on, good to know
@christhomas93002 күн бұрын
What exhaust are you running?
@JeepinJimmy2 күн бұрын
Cheapest muffler Rock Auto had to offer!
@sergeysmelnik2 күн бұрын
C5. Still the best looking corvette
@michaelangelos51172 күн бұрын
If you draw a pizza, you don't have to pay for it. But you can't eat it, either.
@JeepinJimmy2 күн бұрын
Big facts
@craigpini45053 күн бұрын
Ya nice! R 3:58 ide to bad no Vette Viper can beat a tiny 6 cyl Gtr! TX2K24 ! Stay home!Gtr's schooled all UGR had to give!
@johngregson4030Күн бұрын
My brother in Christ are you okay?
@nismos14270r3 күн бұрын
Nice work Jimmy!
@JeepinJimmy2 күн бұрын
Thanks buddy!
@hotrodder19684 күн бұрын
Nice
@JeepinJimmyКүн бұрын
Thanks brother
@markwarnberg95044 күн бұрын
Yuo forgot to adjust the valves. Check down by the Speedo houseing gear at the wheel. You have to take the front wheel off. I believe the O ring is a oil ring gasket that goes to another model.
@JeepinJimmy2 күн бұрын
Thanks for the tips!
@williamkeefer41404 күн бұрын
i had older cl 360 twin the little hondas are great little bikes to run errands on hey that speedometer cable has a squared in take the one loose from speed meter jack the front wheel off the ground turn the wheel by hand and feel the cable rotate turn the front wheel slow at same time put in speed meter till square splines alline
@kpeeks4 күн бұрын
Hmm my 96 gets 16.5mpg (18.2 hwy) and it's 236k mi, only thing done was the accel tune up kit. I keep going back and forth on doing the 4 hole injectors. But might finally do it, chasing the 18/20mpg.
@stevedennis44934 күн бұрын
Also, may be an idea to grease both ends of choke cable and the choke linkage on the carbs, as they can seize up and cause strain on the new cable(don't ask how I know!!!). I had my 250 for 13 years and it was fantastically reliable with only minimum maintenance. The weak points are the exhaust collector box rusting out, the stock shock absorbers leaking and a weak single front disc brake. All easily sorted, 2-1 exhaust, new shocks and braided metal brake lines, or fit a twin disc wheel/brake calipers and master cylinder. Also would advise oiling the speedo cable to help avoid corosion, as they can seize up and destroy the speedo drive in the wheel or in the tachometer, depending. You could try removing the front wheel, and check the dogs on the speedo drive on the hub. If they're bent, the speedo won't work. One way to test the rev counter is to disconnect the speedo cable, from the wheel end, put the cable into a cordless drill, spin it up and see if the rev counter needle moves. If it does, then the problem is at the drive end on the wheel.
@JeepinJimmy4 күн бұрын
Thanks for all this info man that will help a ton! You da man!
@stevedennis44934 күн бұрын
the round rubber gasket is for a different model. The filters fit both models, but the casing the gasket fits into is a different shape. I used to have a CB 250n Super Dream(250 Hawk in the states) and used to get both rubber seals with the replacement filters. I think the earlier Honda 250 G5 used the round one, or it may have been a CX500? Hope this helps. Steve.
@JeepinJimmy4 күн бұрын
Right on man thank you!!
@fredshred51944 күн бұрын
They are a bit dull, but they go for ever, like most Honda CB's. Great bike for new riders economical low maintenance.
@JeepinJimmy4 күн бұрын
No doubt!
@ognjendedovic80884 күн бұрын
Awesome work man! Keep it up🍻
@JeepinJimmy4 күн бұрын
I appreciate it man!
@germtheory12574 күн бұрын
Got this ride for my 16th birthday..........sweet memories.
@billrhea4 күн бұрын
Man I had that bike. I really miss it
@hummingcatfish5 күн бұрын
It's so cool how you just figure things out, one of the reasons I love your videos!
@JeepinJimmy4 күн бұрын
Thank you for watching!
@anthonywrenn40855 күн бұрын
Guys living my dream. Tap dancing c5 on country back roads on a bright sunny day. Love it.
@MarkLoganFIB5 күн бұрын
Just some low voltage high amp sparks. Youll be fine, you'll just burn the fuck outta yourself. Dont ask how i know.
@hunterlang6 күн бұрын
Stock exhaust manifold? Or long tube headers?
@JeepinJimmy5 күн бұрын
Speed Engineering long tubes
@ervyt45796 күн бұрын
Honda gang!!
@JeepinJimmy5 күн бұрын
Fo sho bud!
@THX..11387 күн бұрын
The oil pump is probably fine. The pump is designed to pump oil through the motor, not water, not mixture of oil and water.
@famerlylove60617 күн бұрын
I have an automatic Sahara unlimited. I want to swap it to a standard. Is that a pretty easy deal??
@JeepinJimmy5 күн бұрын
Other than hardware and pedals, you would probably also need to switch computer and wire harnesses but not sure.
@famerlylove60615 күн бұрын
@@JeepinJimmy that does sound like a lot actually if I were to have to change the computer. You think a flash would work? Or just a brand new computer?
@JeepinJimmy5 күн бұрын
@@famerlylove6061 probably one from a donor Jeep that has a manual transmission already
@famerlylove60615 күн бұрын
@@JeepinJimmy you rock man!
@user-tk1fx1pt2n7 күн бұрын
For the bumper ends use Kiwi liquid shoe polish works great and lasts
@JeepinJimmy5 күн бұрын
I will try this haha thanks!
@user-ws5np6uq2q8 күн бұрын
mine has the 8.25 but i still watched the full video pretty intertaining
@JeepinJimmy5 күн бұрын
Thank you!
@elongnutz25318 күн бұрын
KaCHOWWWWW
@BodVar_Sul9 күн бұрын
Turned out slick that black on red is sexy. Where'd you get that steering wheel
@JeepinJimmy5 күн бұрын
Thanks man! It's a Grant Classic wheel that I got from LMC Truck
@hummingcatfish9 күн бұрын
Hell yeah!!!! That's so cool you got both working!
@JeepinJimmy5 күн бұрын
Thanks!!
@troysherman-t7p9 күн бұрын
Any of u guys that have replaced dash live in New York? I would pay good money too have someone replace my dash plus ac and heater core.
@davidcraft490910 күн бұрын
If you do this, you will be the first person in history to every repair the dual tanks not working, lol. I just started the video, but I believe you will get them working. But this has just been a topic among me and my friends about how nobody ever fixes the dual tanks. I do appreciate people that put stuff back 100% stock, in working order. So, just our of curiosity I'm going to learn why people don't and how to do it.
@JeepinJimmy5 күн бұрын
Hahaha I just want to be able to procrastinate when it comes to filling up 😂
@davidcraft49093 күн бұрын
@JeepinJimmy yeah I don't blame you on that. I just commented, because I've been around those trucks for years. I daily drove 3, my dad and brother atleast about another 3 each. This was about 20 years ago and none of us had both tanks, lol.
@JoeVizethum10 күн бұрын
...who's that girl working around with you - tell me, who's that girl running around with you ? 😘
@bernatzmark11 күн бұрын
Well I've got some kinda white whale of a YJ that actually HAS factory ABS. I've got an 8.8 rear axle that im gonna be swapping in and i knew id have to delete the ABS for that, but now the module is in the way for my new fenders so its coming out tomorrow. Thanks a ton for this info, it was a PITA trying to find a proportioning valve, so after watching your video im headed to my junkyard for a "new" one. I also wanted to say you KILLED me in this video after you finished the passenger side front install with your comment: "Well, i aint gonna lie, that sucked! And it aint exactly pre-bent anymore..." Can't wait to experience it first hand.... 😂
@JeepinJimmy5 күн бұрын
Right on man thanks haha. Good luck!
@bernatzmark5 күн бұрын
@@JeepinJimmy well, the ABS is out! and I ain't gonna lie.... That did suck, but it's done and the fender is in! Thanks again for the how-to video!
@samchee917811 күн бұрын
You don't show ur wrk. Lame
@ajrichards512111 күн бұрын
Just add mufflers , it will be nice
@JeepinJimmy5 күн бұрын
For sure! Thats the plan
@Lobsterdollar12 күн бұрын
Soo i need new seats but i need lumbar support.
@Pistonpowerracing12 күн бұрын
Love mine
@HexMagmus13 күн бұрын
It honestly sounds pretty similar to the cammed 5.7 in my Chrysler. That sound is always a joy to hear.
@user-ht1xu4gv2u14 күн бұрын
Watch vacum around gas tanks. Vapors make a big BOOOOOOOM
@JeepinJimmy5 күн бұрын
It must be amateur hour because I never heard of this until I read your commented and did some research 😂😂 Thanks haha
@user-ht1xu4gv2u5 күн бұрын
@@JeepinJimmy yeah kid in town wanted to emptyngas has from mustang Brite ideas was to use. Shop vac started up within b15sec. He was gonwe
Пікірлер
Ya girl revved it like you're supposed to, respect.
Thanks for the video. Makes me feel more confident. In replacing mine.
It's lowered on stock bolts??
@@jamesj5469 yeah man you know it
To all you r8, civic, lambo, and gtr guys, this is what a TRUE sports car sounds like. It doesn't sound like some ragged out piece of shit.
It does sound good. You make everything look so easy. It wouldn't be that simple if I attempted it.
My guy can sing!
😂😂no.
Everybody thinks European v8s sound exotic but don’t realize how insane an American v8 with a little more encouragement to move the air can sound
“Sorted by low to high of course” one day i hope im rich enough to sort by high to low 😭
Me too buddy😂
Where’s the headers and x pipe from the old setup?
Probably gonna throw it up on marketplace
Love the C5 content
Hell yeah brother
Brother!
Hello c5 brother !!! Cheers from HUNGARY !!!
Right on!!
Very detailed. Thank you!. FYI - Petroleum jelly will degrade rubber over time causing it to harden and crack, a silicon grease is a better option for lubricating o-rings
Thanks! Right on, good to know
What exhaust are you running?
Cheapest muffler Rock Auto had to offer!
C5. Still the best looking corvette
If you draw a pizza, you don't have to pay for it. But you can't eat it, either.
Big facts
Ya nice! R 3:58 ide to bad no Vette Viper can beat a tiny 6 cyl Gtr! TX2K24 ! Stay home!Gtr's schooled all UGR had to give!
My brother in Christ are you okay?
Nice work Jimmy!
Thanks buddy!
Nice
Thanks brother
Yuo forgot to adjust the valves. Check down by the Speedo houseing gear at the wheel. You have to take the front wheel off. I believe the O ring is a oil ring gasket that goes to another model.
Thanks for the tips!
i had older cl 360 twin the little hondas are great little bikes to run errands on hey that speedometer cable has a squared in take the one loose from speed meter jack the front wheel off the ground turn the wheel by hand and feel the cable rotate turn the front wheel slow at same time put in speed meter till square splines alline
Hmm my 96 gets 16.5mpg (18.2 hwy) and it's 236k mi, only thing done was the accel tune up kit. I keep going back and forth on doing the 4 hole injectors. But might finally do it, chasing the 18/20mpg.
Also, may be an idea to grease both ends of choke cable and the choke linkage on the carbs, as they can seize up and cause strain on the new cable(don't ask how I know!!!). I had my 250 for 13 years and it was fantastically reliable with only minimum maintenance. The weak points are the exhaust collector box rusting out, the stock shock absorbers leaking and a weak single front disc brake. All easily sorted, 2-1 exhaust, new shocks and braided metal brake lines, or fit a twin disc wheel/brake calipers and master cylinder. Also would advise oiling the speedo cable to help avoid corosion, as they can seize up and destroy the speedo drive in the wheel or in the tachometer, depending. You could try removing the front wheel, and check the dogs on the speedo drive on the hub. If they're bent, the speedo won't work. One way to test the rev counter is to disconnect the speedo cable, from the wheel end, put the cable into a cordless drill, spin it up and see if the rev counter needle moves. If it does, then the problem is at the drive end on the wheel.
Thanks for all this info man that will help a ton! You da man!
the round rubber gasket is for a different model. The filters fit both models, but the casing the gasket fits into is a different shape. I used to have a CB 250n Super Dream(250 Hawk in the states) and used to get both rubber seals with the replacement filters. I think the earlier Honda 250 G5 used the round one, or it may have been a CX500? Hope this helps. Steve.
Right on man thank you!!
They are a bit dull, but they go for ever, like most Honda CB's. Great bike for new riders economical low maintenance.
No doubt!
Awesome work man! Keep it up🍻
I appreciate it man!
Got this ride for my 16th birthday..........sweet memories.
Man I had that bike. I really miss it
It's so cool how you just figure things out, one of the reasons I love your videos!
Thank you for watching!
Guys living my dream. Tap dancing c5 on country back roads on a bright sunny day. Love it.
Just some low voltage high amp sparks. Youll be fine, you'll just burn the fuck outta yourself. Dont ask how i know.
Stock exhaust manifold? Or long tube headers?
Speed Engineering long tubes
Honda gang!!
Fo sho bud!
The oil pump is probably fine. The pump is designed to pump oil through the motor, not water, not mixture of oil and water.
I have an automatic Sahara unlimited. I want to swap it to a standard. Is that a pretty easy deal??
Other than hardware and pedals, you would probably also need to switch computer and wire harnesses but not sure.
@@JeepinJimmy that does sound like a lot actually if I were to have to change the computer. You think a flash would work? Or just a brand new computer?
@@famerlylove6061 probably one from a donor Jeep that has a manual transmission already
@@JeepinJimmy you rock man!
For the bumper ends use Kiwi liquid shoe polish works great and lasts
I will try this haha thanks!
mine has the 8.25 but i still watched the full video pretty intertaining
Thank you!
KaCHOWWWWW
Turned out slick that black on red is sexy. Where'd you get that steering wheel
Thanks man! It's a Grant Classic wheel that I got from LMC Truck
Hell yeah!!!! That's so cool you got both working!
Thanks!!
Any of u guys that have replaced dash live in New York? I would pay good money too have someone replace my dash plus ac and heater core.
If you do this, you will be the first person in history to every repair the dual tanks not working, lol. I just started the video, but I believe you will get them working. But this has just been a topic among me and my friends about how nobody ever fixes the dual tanks. I do appreciate people that put stuff back 100% stock, in working order. So, just our of curiosity I'm going to learn why people don't and how to do it.
Hahaha I just want to be able to procrastinate when it comes to filling up 😂
@JeepinJimmy yeah I don't blame you on that. I just commented, because I've been around those trucks for years. I daily drove 3, my dad and brother atleast about another 3 each. This was about 20 years ago and none of us had both tanks, lol.
...who's that girl working around with you - tell me, who's that girl running around with you ? 😘
Well I've got some kinda white whale of a YJ that actually HAS factory ABS. I've got an 8.8 rear axle that im gonna be swapping in and i knew id have to delete the ABS for that, but now the module is in the way for my new fenders so its coming out tomorrow. Thanks a ton for this info, it was a PITA trying to find a proportioning valve, so after watching your video im headed to my junkyard for a "new" one. I also wanted to say you KILLED me in this video after you finished the passenger side front install with your comment: "Well, i aint gonna lie, that sucked! And it aint exactly pre-bent anymore..." Can't wait to experience it first hand.... 😂
Right on man thanks haha. Good luck!
@@JeepinJimmy well, the ABS is out! and I ain't gonna lie.... That did suck, but it's done and the fender is in! Thanks again for the how-to video!
You don't show ur wrk. Lame
Just add mufflers , it will be nice
For sure! Thats the plan
Soo i need new seats but i need lumbar support.
Love mine
It honestly sounds pretty similar to the cammed 5.7 in my Chrysler. That sound is always a joy to hear.
Watch vacum around gas tanks. Vapors make a big BOOOOOOOM
It must be amateur hour because I never heard of this until I read your commented and did some research 😂😂 Thanks haha
@@JeepinJimmy yeah kid in town wanted to emptyngas has from mustang Brite ideas was to use. Shop vac started up within b15sec. He was gonwe