Пікірлер

• 
  @anneanderson42225 күн бұрын

  Thanks for this video. Do you let the vessel cure before sealing?

• 
  @WizeOwlCandles3 күн бұрын

  Yes I let it cure for 24 hours :)

• 
  @cupcakecanopy5 күн бұрын

  Thank you. I just got one of these and needed to learn how to use it. Now I do!! ❤️❤️❤️

• 
  @WizeOwlCandles3 күн бұрын

  I'm glad it helped!

• 
  @BGMBliss5 күн бұрын

  Glad to see you again!

• 
  @WizeOwlCandles3 күн бұрын

  Thank you! Glad to be back!

• 
  @Alwyzrite287 күн бұрын

  Thank you for the unboxing and the discount code. I have been waiting to try their molds for the last year. I love the uniqueness of them. And new designs each week

• 
  @WizeOwlCandles6 күн бұрын

  Yes! They are high quality molds that are actually pretty affordable :) thanks for watching! I am doing videos on each one separately so more to come!

• 
  @MeredithDuhau8 күн бұрын

  Thanks so much, heaps of info.

• 
  @WizeOwlCandles6 күн бұрын

  Of course! Thanks for watching!

• 
  @patrickkelly17148 күн бұрын

  ❤ Awesome! Really PERFECT FOR COUNTLESS SITUATIONS ❤

• 
  @WizeOwlCandles8 күн бұрын

  Thank you!

• 
  @patrickkelly17148 күн бұрын

  Ohhh WOWWW!! That is really awesome! YOU are the most incredibly wonderfully creative person ever!! AND Your candles have Absolutely the most amazingly beautiful looks and Fragrances!! ❤🌹🙏🥰

• 
  @WizeOwlCandles8 күн бұрын

  Thank you!

• 
  @laurausher496617 күн бұрын

  That’s my favorite part too, the reveal of the magical surprise. 🤣🤣🤣

• 
  @WizeOwlCandles9 күн бұрын

  Yess!

• 
  @laurausher496621 күн бұрын

  I love that sealer, and that jar does go a long way.

• 
  @WizeOwlCandles9 күн бұрын

  It really does!

• 
  @shannonkovecses504121 күн бұрын

  Does this work with resin molds too?

• 
  @WizeOwlCandles9 күн бұрын

  Yes!

• 
  @WizeOwlCandles9 күн бұрын

  Yes!

• 
  @solzada76123 күн бұрын

  I get holes in the cement when I take them out of the mold

• 
  @WizeOwlCandles9 күн бұрын

  Try tapping the sides of the container and getting all those air bubbles out when pouring :)

• 
  @WizeOwlCandles9 күн бұрын

  Try tapping on the sides of the mold during pouring to help release the air bubbles :)

• 
  @solzada76124 күн бұрын

  Hello how do you clean your mixture container easily?

• 
  @WizeOwlCandles9 күн бұрын

  I use my sink but I don't have any residue on the containers. I try to get all the concrete chunks off before rinsing :) soap and water

• 
  @mariahen1924 күн бұрын

  You’re a life saver ❤

• 
  @WizeOwlCandles9 күн бұрын

  Glad it was helpful!

• 
  @elizabethnavarro835029 күн бұрын

  How do you make the concrete look like white? I love it

• 
  @WizeOwlCandles9 күн бұрын

  Thank you! I use titanium dioxide powder and mix it in with the concrete amzn.to/3e2wiav There is a direct link to the one I use :)

• 
  @yetundesolarin2836Ай бұрын

  If i want to car mold, will the car sit or be turn upside down

• 
  @WizeOwlCandles9 күн бұрын

  Upside down :)

• 
  @ruthie24GАй бұрын

  Do you spray anything before pouring the concrete mix to not stick to the mold?

• 
  @WizeOwlCandles9 күн бұрын

  No I've tried that before and other caused wet spots. If you let it dry long enough it shouldn't stick :)

• 
  @samuilzlatarov2641Ай бұрын

  Thank you so much for taking the time to create this video. It was incredibly helpful for me as I'm experimenting and testing to find the right formula for my cement bowls. It was challenging at first to understand the need for adding sand to the cement, especially since we don't have a ready-made mix like Cementall here in Bulgaria. Your insights have been invaluable in guiding me through this process.

• 
  @WizeOwlCandles9 күн бұрын

  I'm so glad it was helpful! Thank you for watching!

• 
  @marthabond4456Ай бұрын

  I purchased a mold from Amazon and watched your video, My mold is head of a little boy and this video help me so much now I can start my project is for my classroom . Thank you

• 
  @WizeOwlCandles9 күн бұрын

  Of course! Thank you so much for watching!

• 
  @patrickkelly17142 ай бұрын

  Missed you so very MUCH! WELCOME BACK 🌹👍🤗🙏

• 
  @WizeOwlCandlesАй бұрын

  Thanks!

• 
  @AnnesreborndollsandfunW2 ай бұрын

  What cement mix are you using in Canada ? Cement all is not available in my area Ans not paying 128.00 and fees. Please help me what are you using from co op ?

• 
  @WizeOwlCandles9 күн бұрын

  I'm in the US so I'm not sure what is in Canada. I know some people use Gypsum if that is locally available?

• 
  @AnnesreborndollsandfunW9 күн бұрын

  @@WizeOwlCandles thank you .

• 
  @NicoleMold2 ай бұрын

  Hi Kala, we really like your content a lot! We have sent an email seeking collaboration. Could you please take some time to check it?

• 
  @WizeOwlCandles2 ай бұрын

  Thanks! I emailed you back :)

• 
  @sandracrawn6233 ай бұрын

  Yes I hope you can help me because I did exactly what you said to do png times 2 download .but design space will not allow cont it wants me to replace the image . I'm assuming it's low quality so how do I fix that

• 
  @sandracrawn6233 ай бұрын

  May I ask what font size you used in your info text

• 
  @WizeOwlCandles9 күн бұрын

  6 :) thanks for watching!

• 
  @sandracrawn6233 ай бұрын

  Question on the 2x bigger it that that size you adjust

• 
  @patrickkelly17143 ай бұрын

  Totally Awesome... Perfect for EVERY HOME AND OFFICE🥰🙏💖

• 
  @WizeOwlCandles9 күн бұрын

  Thank you!

• 
  @scentedlegacy3 ай бұрын

  Love this!

• 
  @WizeOwlCandles9 күн бұрын

  Thank you!

• 
  @Jimandterimuncy3 ай бұрын

  Beautiful! What did you mix into your concrete? Also are you using 464? Thank you!

• 
  @WizeOwlCandles9 күн бұрын

  I mixed in color pigment. And yes i am! Thanks for watching!

• 
  @BGMBliss4 ай бұрын

  Love your videos!! How do you clean your silicone bowls and molds without clogging the sink? 😭

• 
  @WizeOwlCandles9 күн бұрын

  Thank you! I make sure to take all the chunky concrete bits off the mold first and then I rinse with really hot water and soap. I haven't had any issues when doing it that way

• 
  @BGMBliss9 күн бұрын

  @@WizeOwlCandles Thank you! I made a couple of planters already after watching your videos! <3

• 
  @bambichristensen46904 ай бұрын

  Thank you. Appreciate the info.

• 
  @WizeOwlCandles9 күн бұрын

  Thanks for watching!

• 
  @krystalenglish28614 ай бұрын

  Do you put coloring in your candles, and if so, what part of the process do you add it to the wax melter?

• 
  @WizeOwlCandles9 күн бұрын

  I don't color my Candles normally. 100% soy wax and coloring usually doesn't look good. But if you were to add color you would want to add it to the pouring pitcher before you pour your fragrance oil.

• 
  @Moirah-Blessingchild4 ай бұрын

  Thank you so much 🙏🙏🙏

• 
  @WizeOwlCandles9 күн бұрын

  Thank you for watching!

• 
  @elvishards81614 ай бұрын

  Ty I wasn't sure if pitcher went straight on hob or the boiling water method,very much appreciated

• 
  @WizeOwlCandles9 күн бұрын

  Of course! Thanks for watching!

• 
  @user-to9uz6ck3e4 ай бұрын

  Hi, I am intending to make some concrete pots ( I am a novice and having make any yet ). I wonder if I can use white cement + plaster of Paris and white sand. What would be your advice . Thank you

• 
  @WizeOwlCandles9 күн бұрын

  My advice would be to try everything :) you might even come up with your concoction that works really well for you!

• 
  @sephineminien32304 ай бұрын

  I understand that this video is 2 years old, I hope you have found a more sustainable way to mix your cement, like a silicone bowl or other reusable container.

• 
  @WizeOwlCandles9 күн бұрын

  Hi! Thank you for watching, yes I now use silicone mixing bowls :)

• 
  @apriljohnson49504 ай бұрын

  Great info! How long do you cure the concrete before sealing?

• 
  @WizeOwlCandles9 күн бұрын

  I let it set for about 24 hours :)

• 
  @kindredinspirit4 ай бұрын

  Do you leave the left over wax in a cold unit till you need to make another candle or do you keep it in the warm position to keep it liquid for when you need to make a candle at a later time?

• 
  @WizeOwlCandles9 күн бұрын

  If you are making candles back to back keep it on. But if it is going to be the next day or later that day I would turn it off let the wax cool and then heat it back up when you are ready :)

• 
  @CeliaBeyda-hs5yb5 ай бұрын

  Hi, would this remove color stains?

• 
  @WizeOwlCandles9 күн бұрын

  Yes sometimes the dawn soap will get rid of stains!

• 
  @nancymedley6235 ай бұрын

  I know this is an old video, but I can never get the vinyl to stick to resincrete.😢

• 
  @WizeOwlCandles9 күн бұрын

  Oh I'm sorry :( I'm not sure about resincrete but I know the coarse texture of concrete helps the vinyl stick for me . Thank you for watching!

• 
  @jessicagibson1095 ай бұрын

  I know this is old video but great tutorial. Thank u

• 
  @WizeOwlCandles9 күн бұрын

  Thank you so much! I am coming out with new videos :) I had a baby and took a break

• 
  @user-hu8yc2sb5j5 ай бұрын

  Hi what does seeping mean

• 
  @WizeOwlCandles9 күн бұрын

  When the wax will seep through the concrete. It's like a "leak"

• 
  @makeresemesenkhela10765 ай бұрын

  How much wax melter pls

• 
  @WizeOwlCandles9 күн бұрын

  I have a link for it here. This is one option. I have two of them amzn.to/3dUqSOF

• 
  @tonnyajuhnke47275 ай бұрын

  It says u havent made videos for a yr now are u still on youtube?

• 
  @WizeOwlCandles9 күн бұрын

  Hi! I am BACK now :) I had a baby and took a bit of a break

• 
  @SunnieMo_5 ай бұрын

  I wish I can 👍🏾 this a million times!!!! Thank you 🫶🏾

• 
  @WizeOwlCandles9 күн бұрын

  Of course! Thank you for watching!

• 
  @lenaamartin365 ай бұрын

  Thank you for this video, very very useful

• 
  @WizeOwlCandles9 күн бұрын

  Thank you for watching!

• 
  @ReligiousReflections-pk2tz5 ай бұрын

  Do not be embarrassed, this is a learning video and an eye-opener for me who is just learning about this cement vessel.

• 
  @WizeOwlCandles9 күн бұрын

  Thank you for watching!

• 
  @royrussell85316 ай бұрын

  Your very detailed information is awesome. I have never viewed videos that were this detailed, and I have viewed thousands, literally. Thank you for sharing!!!😊

• 
  @WizeOwlCandles9 күн бұрын

  I'm so glad it was helpful! Thank you for watching:) Stay tuned for newer videos.I took a break to have a baby, and now I'm back!

• 
  @CarolineDeKimpe6 ай бұрын

  Hi :) What percentage of titanium dioxide do you recommend? I have been advised that using too much weakens the structure of the vessel.. Thank you

• 
  @WizeOwlCandles9 күн бұрын

  Yes if you use too much it will weaken it. I usually use no more then 2 Tablespoons for an average size container

• 
  @chelamalave4366 ай бұрын

  Thank you very much. 😍

• 
  @WizeOwlCandles6 ай бұрын

  Absolutely!

• 
  @c.i.b.i.a6 ай бұрын

  Hello! I've been crafting silicone molds for my customers and noticed varying behaviors in the same brand of siliconeI use platinum based silicon. While previous curing times difered-ranging from 24 hours to as little as 3 hours-they never affected the resin outcome until now. Recently, when the silicone cured within 3 hours and I poured resin into it, the silicon lost its shine upon removal of resin from the mold. This unexpected issue has me deeply concerned. Any guidance you could provide would be greatly appreciated. Thank you.

• 
  @WizeOwlCandles9 күн бұрын

  That is a strange reaction. I haven't experienced that before but I'll keep an eye out and let you know if I do and any advice I may come across :) thanks for watching!

• 
  @dchall86 ай бұрын

  You keep talking about concrete drying. Sure it does dry, but what you need to know is that concrete _CURES_. The concrete curing process can, and should, be done under water. That way heat and humidity will ALWAYS be the same and won't affect the batch to batch outcome. Curing is a chemical process where the wet cement particles coating the silica sand (in the case of Cement All) chemically grow a granular structure which interlocks to itself. If the concrete dries before it cures, then the curing process stops and those interlocking bonds don't happen leaving you with weak concrete. One day under water is a good start and much better than zero days or only a few minutes. One week is better and one month under water is best. Obviously you've figured out that your vessel castings are strong enough for candles, but if you were wondering why some are stronger than others, blaming Arizona's famous dry heat is a good start. You were spot on with your discussion about humidity. For small castings you could demold the vessels according to Cement All's directions and immediately place them into a bucket of water (as the (poor) instructions on the Cement All box direct). Near the end of your video you said that you will quickly learn how much Cement All to use for each mold. Once you have that figured out, you should weigh that amount of cement and write it onto each mold along with the weight of water so you aren't guessing in the future. Can you even write on silicone molds? Dunno. Alternatively I believe you can buy silicone measuring vessels in assorted sizes so you can skip the scales. The minerals in your water also make a difference. If you have hard tap water that varies in hardness from day to day, that's a problem. Soft water has all the calcium, magnesium, and iron removed and is much better. Bottled water is sometimes better than that. You can refill 5 gallon bottles of bottled water at Walmart and some grocery stores for pretty cheap compared to small bottles. The ceramics community does slip casting by making a thin slurry of clay to coat the inside of their casting molds. The same can be done with concrete, but you have to work faster (than clay). For concrete it works like this: you pour small amount of a slightly thinner batch of concrete into the mold first, tip and rotate the mold around to coat the inside of the mold, pour out any excess, and then pour the rest of the concrete in. For the area where the mold is exposed (the actual inside bottom of the vessel), you can use a chip brush to coat a thin layer of the "slip" and then do the pour over that. The brush removes the bubbles from the silicone/concrete interface. I don't think you could do a good marble effect like this, but for one color pours it should work to keep bubbles out of the surfaces. And as I look at your channel name, it seems to me you've figured out most of what I just said over the past year. I'll go sit down now, but maybe this will help someone else who is just looking at your tips.

• 
  @WizeOwlCandles6 ай бұрын

  Yes I've experienced everything you mentioned in your comment 👍 We are on the same page lol thanks for watching!