Love your videos. Thank you for your help.

@WizeOwlCandles

3 жыл бұрын

Thanks for watching!

Thank you! So informative

@WizeOwlCandles

3 жыл бұрын

Thanks for watching!

Great video, thank you! I have been mixing the td in water first but I am going to try adding the powder into the cement!!!

@WizeOwlCandles

3 жыл бұрын

It is way easier in my opinion! :)

Big thanks!!

@WizeOwlCandles

2 жыл бұрын

You are very welcome!

Thank you.... can't wait to play with a white base.

@WizeOwlCandles

2 жыл бұрын

Yes! Titanium dioxide is a game changer

Thank you ❤

@WizeOwlCandles

3 жыл бұрын

You're welcome!

Thank you for sharing.

@WizeOwlCandles

3 жыл бұрын

Absolutely!

Great video! I tried Direct Colors white pigment which worked well, but I already have TD for cold process soap making, so I would rather use that. Thanks for showing both methods. I'm going to try this today. Please keep these type of DIYs coming! :)

@WizeOwlCandles

3 жыл бұрын

Thank you for sharing about direct colors! That is good to know :) Thanks for watching!

Thank you:)

@WizeOwlCandles

3 жыл бұрын

You are very welcome! Thanks for watching!

You had mentioned in a past video that you were testing a new sealer for candle making. If you don't mind sharing your thoughts on the new coating. thanks!

@WizeOwlCandles

3 жыл бұрын

Yes I am going to be posting This soon I wanted to make sure everything was tested properly :)

You really have such a great process and great videos. Thank you for sharing them. I'm wondering if you've considered using materials that are not disposable to cut down on plastic waste? You could easily replace those plastic cups with reusable silicone bowls for example.

@WizeOwlCandles

2 жыл бұрын

That is a great idea! I will have to try that out! Thank you :)

Hello! I love your videos, they have helped me so much in making my candle vessels. I was just wondering if you have added color after mixing in your TD, for a white base for your color?

@WizeOwlCandles

2 жыл бұрын

I have! It definitely helps grab the color more :) I usually use it on colors that I need bright

Such great content, thanks! Have you ever used cement instead of concrete? I'm considering using cement but I'm not sure if it's too brittle.

@WizeOwlCandles

2 жыл бұрын

Hi! Thanks! I have used cement but it didn't work well as it was very weak. The Concrete is mix of cement and sand which helps with the durability

Thanks for your content!! I'm struggling with the hexagon mould off amazon as it really is tough to get off but hoping I can get the hang of it soon. Because of it's shape its really hard to roll down. The smaller octagon set of 12 moulds have my jars coming out a little lopsided at times even though im shaking and adjusting it on a flat surface - tips?

@WizeOwlCandles

2 жыл бұрын

Hi! For the smaller ones I would say just tap the sides gently to get the form back. I experienced the same thing but after playing around with it a bit they straighten out :)

I add my titanium to the dry cement and stir the dry ingredients 1st. I add about 5 or 6% of my weight. That seems to get mine super white

@WizeOwlCandles

2 жыл бұрын

Nice! Thanks for sharing!

Loved the video 🙏🏼 but why you don’t use a white cement instead? Thanks

@WizeOwlCandles

3 жыл бұрын

I haven't found white cement I like using. I also like the idea of controlling how white the container can be :) thanks for watching!

Hi! Have you tried this process with the cement and titanium dioxide by also adding a direct colors pigment? I really want to learn how to get a nice cream/beige color and I have yet to see someone do it. Thank you love your videos!

@WizeOwlCandles

2 жыл бұрын

Yes :) it works well! I would only recommend for light colors though like pastels or light shades

Can you add a little blue powder for concrete to have a bluish hue without compromising the strength of mold or avoidca chemical reaction?

@WizeOwlCandles

Жыл бұрын

Yes! I use concrete pigment to color my concrete :)

Great info Kayla 👍 I'm having an issue with my mold, they are coming out slightly lopsided. Any tips would be greatly appreciated. Thank you. 😁

@WizeOwlCandles

3 жыл бұрын

I would make sure it is on a flat surface when drying and really make sure you are tapping the sides. I found that sometimes the concrete will be higher on one side so getting level to the mold to see if the bottom is level will help too :)

@loriblunt5352

3 жыл бұрын

@@WizeOwlCandles thank you Kayla, I'll try that. 😊

@WizeOwlCandles

3 жыл бұрын

Absolutely!

Hi there. Just found your channel and subscribed! I was just wondering if you have ever tried to make a terra cotta colored vessel? I know there are terra cotta colored acrylic paints, but I’m just wondering if they would come out looking just orangey because you can’t use too much paint in the cement. Just wanted to get your thoughts.🙂. Just ordered 3 molds…can’t wait to try these!

@WizeOwlCandles

3 жыл бұрын

Hi! Thanks for watching! I did a red color on one of my videos that almost looks terra cotta. I get pigments from direct colors and they may have a color close to it!

@cindyrobinson2618

3 жыл бұрын

@@WizeOwlCandles thank you so much for your quick response! Love your videos! Cant wait to see whats next!

@WizeOwlCandles

3 жыл бұрын

@@cindyrobinson2618 thank you!! ♥️🙏

Have you tried plaster of paris?

@WizeOwlCandles

2 жыл бұрын

I have not however I have heard of others using it :)

How would you do a marble white effect?

@WizeOwlCandles

2 жыл бұрын

I have done white marbled with other colors and I have a video on my channel to help! It's just mixing them together :)

Hi can I check which wick size you use both cotton wick and wooden one. Thanks

@WizeOwlCandles

Жыл бұрын

Hi! I use different sizes for each container. I usually use CD 12 or CD 3 depending on what container for cotton wicks. I don't use wood wicks in all my containers as of now

Great idea!! Question please! Have you had any issues with your UV coat? Some people in the candle groups were saying we shouldn’t use that type. I would love your opinion please

@WizeOwlCandles

3 жыл бұрын

Hi! Sealant is definitely a preference. I personally have tested Polycrylic on mine and have not had any issues. This is straight from their site for your reference :) "Minwax® Polycrylic® Protective Finish is a crystal clear, fast-drying protective topcoat for use over bare wood, oil- and water-based stains, paint and wallpaper. It has very little odor, is non-flammable, cleans up easily with soap and water, and can be recoated in only 2 hours"

@maricris2561

3 жыл бұрын

@@WizeOwlCandles thank you so much i honestly thinking the same! Appreciate your answer

@claudiagold1925

2 жыл бұрын

@@WizeOwlCandles Thank you so much for these tutorials, I love how concise, straight to the point and clear you make them! I have two questions 1. For the sealant do recommend the satin or matte finish? 2. How long should the containers cure before pouring the candle wax? Thanks again!

have you tried using the white version of your black pigment in comparison to titanium dioxide? do you think that'd work better or worse? i've read a lot of feedback about td compromising the structure of the vessel and i desperately want to avoid that! thanks for sharing all of this great content!

@DONTEATTHEPIE

2 жыл бұрын

nvm, the end of your video answered my question lol can't wait to see that video!

@WizeOwlCandles

2 жыл бұрын

Thanks for watching!

If I am using titanium dioxide, can I also use the marble technique to make these and can I use acrylic paint also in addition to the titanium dioxide?

@WizeOwlCandles

2 жыл бұрын

Yes! I use acrylic and pigment dye for marble. Plus you can do the titanium dioxide to make your white in the marble more true white

Hi :) What percentage of titanium dioxide do you recommend? I have been advised that using too much weakens the structure of the vessel.. Thank you

@WizeOwlCandles

14 күн бұрын

Yes if you use too much it will weaken it. I usually use no more then 2 Tablespoons for an average size container

You have started using bottled water. You said in one of your last 2 videos it is just better. Can you tell me why you have found it to be better? BTW I am absolutely inspired by your videos to try this for my succulent planters. And I may expand out to making candles as well. I am just starting out a business and am so excited about trying these out. Thank you!!

@WizeOwlCandles

3 жыл бұрын

Hi! Yes I have noticed it gives a nicer color and the colors blend better with the drinking water than tap.

@WizeOwlCandles

3 жыл бұрын

Thank you for watching! I am glad they are helping you! ♥️

Is this strong enough to make a cement bowl?

@WizeOwlCandles

Жыл бұрын

Yes it should be depending your mold :)

Thank you for sharing your Tips & Tricks Could you mix plaster of Paris into the cement to make them white? Can you use Mica powder to colour the cement?

@WizeOwlCandles

3 жыл бұрын

I haven't tried plaster of Paris or mica powder so I wouldn't be able to let you know. I do know some powders are not strong enough to change the color.

Thank you! I added titanium dioxide and acrylic paint and my paint didnt show at all, I tried to marble and it came out very shiny not Matte. Any tips?

@WizeOwlCandles

Жыл бұрын

That's strange. I would say try different acrylic paint. Some brands I have noticed blend in more than others. I hope that helps!

Hi, I´m having a hard time getting my vessels sharped after demolding them. when you said: 4:1 ratio. how much concrete grams are in that ratio? why sealer is necessary on vessels? and why mine got cracked after poring my wax :( Help!!!

@WizeOwlCandles

3 жыл бұрын

I actually don't measure the concrete in grams. I have done it by eye this whole time. I would say for my cylinder mold I usually use about half of a red solo cup. I would say try to make one without as much water to test it out. That may help with the cracks. The sealer is so that the wax doesn't seep through the concrete. I would say at least seal the inside

Hi! I have one question: do these forms not crack after some time? I made a few casts of the cement itself and poured it with wax and after a few weeks a crack appeared

@WizeOwlCandles

2 жыл бұрын

Hi! I usually have that issue if I add too much water. I would test out a few different consistencies :)

@SimoNowo23

2 жыл бұрын

@@WizeOwlCandles thank you very much for your answer :) best regards

How much Cementall are you using for the Amazon cylinder mold?

@WizeOwlCandles

Жыл бұрын

I am using about 1/2 of a solo cup. I hope that helps. :)

@1Cor13-13

9 ай бұрын

how much TD to 1/2 solo up?

How can ilI get milkshake consistency?

@WizeOwlCandles

2 жыл бұрын

Keep stirring. Don't add too much water :)

What can be used instead of Cementall

@WizeOwlCandles

2 жыл бұрын

I'm not sure as I have only found cement all to work for me personally :) you can always test out different concrete

Can we add acrylic paint after doing this process ??

@WizeOwlCandles

2 жыл бұрын

Yes! I would only add it on the outside though :)

@THDRNGHT

2 жыл бұрын

@@WizeOwlCandles Is there any issue with adding acrylic paint directly to the mixture?

I'm not sure why but every vessel I make, it always comes out tye-dyed but I want it to be a solid color, how do you stay profitable on your candles if you require so much paint/powder?

@WizeOwlCandles

2 жыл бұрын

I use pigment powders and the titanium dioxide. Once you get in a flow less containers come out messed up :) it just takes practice

Can you just add white acrylic paint instead?

@WizeOwlCandles

3 жыл бұрын

You can absolutely. I have found it doesn't work as well. The white paint really gets hard to stir into the concrete (unlike blue, red, or other colors for some reason). Give it a try though and see which option you like best :)

@josjoseph1883

2 жыл бұрын

@@WizeOwlCandles thank you