Пікірлер

• 
  @staremind413 күн бұрын

  I have a question. So what if I use different cases? Is the adhesive gonna wear out or am I gonna struggle taking on and off as I switch cases?

• 
  @marcussmith577016 күн бұрын

  You have a beautiful property. Thanks for the tour of the veggie garden. Any chance for a new update?

• 
  @goose4501524 күн бұрын

  Crazy expensive

• 
  @rodrigolindemberga29 күн бұрын

  Muito legal! To pensando em pegar um jeep porem ninca tive nem sei qual que eu pego

• 
  @josevera7861Ай бұрын

  Thank you 🌟🌟🌟🌟🌟Russ 🌟🌟🌟👍🌟🌟for your video. Very good job 👏👏👏👍👍👍

• 
  @jvg1088Ай бұрын

  Should've tested the magnet strength on it.

• 
  @rsundar19732 ай бұрын

  How is the heat issue while charging?

• 
  @Tacticalpanda7572 ай бұрын

  But you cant take the snap on and off tho :(

• 
  @hollywaz91442 ай бұрын

  This was very detailed and super helpful! Thank you for doing this because it will save me some time. Can’t wait to get rid of all of my fabric bags.

• 
  @northern_yankee3 ай бұрын

  $350 seems a bit pricey

• 
  @barbara7772 ай бұрын

  I bought one set of the silverware about a year ago for work and I use this set m-f and the paint is worn almost completely off on the fork and spoon but damn is it convenient having it all put together. I am hoping they improved the paint or offer it in stainless steel. I definitely wouldn't buy them for that much for a full set with the plates and all if they haven't done that.

• 
  @timc7787Ай бұрын

  @@barbara777 offering 40% off right now through the weekend (6-4-24) for fathers day. DAD2024 is the code. I just bought a set

• 
  @MikeTLive3 ай бұрын

  Exceptional 2 part video series that stands the test of time. I learned things from you. thanks for posting!

• 
  @nathenthatcher33184 ай бұрын

  I just got one.....works goof for me so far and blew my mind it sticks my s22ultra to the fridge...lol. didn't think it would hold..... it does!!!

• 
  @Rexroy4 ай бұрын

  Anyone knows if this can be bought in Europe?

• 
  @arthurcitron97744 ай бұрын

  Spot on!👊🏻🇺🇸

• 
  @SeriousASMR4 ай бұрын

  I ordered 2 if these 1 for me and 1 for a gift and after trying to charge with wireless charging it almost melted the charger it got so hot. Too risky to use so i told my friend to not use it its s shame cause it does look nice and it helps holding but not being able to wireless charge safely is a deal breaker im not risking my 1600 dollar phone. I sent them an email and they immediately refunded both orders didnt even ask to return it...

• 
  @imatt65664 ай бұрын

  ❤❤❤

• 
  @kellykishpaugh88404 ай бұрын

  The dirty hands were all my fault. Russ replaced my entire headlights today. Not just bulbs the entire thing and did a fantastic job! Seriously incredible job. I can drive at night again! It was a pleasure giving him my business!!!

• 
  @IshTheEngineer4 ай бұрын

  Can it be used on induction ovens?

• 
  @russellsrandomness4 ай бұрын

  Based on the feel of the materials used, I wouldn't recommend cooking in them.

• 
  @stewiegriffin30005 ай бұрын

  I just wanna know if it will work ok with the urban armor monarch pro magnetic series. If anyone has that case and has tried this product with it let me know please!

• 
  @danpease83955 ай бұрын

  Thank you Thank you Thank you for pointing out the difference between straight thread and tapered National Pipe Thread. I just watched a "Professional Boat Builder's" (emphasis on the quotes) channel where he combined the two different thread types. I'm going to call it backyard boatbuilding.

• 
  @ColbyMyers5 ай бұрын

  Do not buy this if you have a Samsung phone with sPen. The magnets interfere with sPen use. The company will not refund money without customers dipping into their own pockets to pay for return shipping for a mistake they made. I would not recommend this product due to deceptive and dishonest company practices. It literally would have been as easy as a 2 second Google search to find out that magnets interfere with the use of sPen. Information that has been published 10+ years ago and now the customer has to pay for their mistake!!! What kind of company doesn't own up to its mistakes???

• 
  @russellsrandomness5 ай бұрын

  That's weird, my S pen works fine. I have heard people are having issues though. And when I had issues with one it was no problem to get a replacement. That sucks that you are having issues.

• 
  @ColbyMyers5 ай бұрын

  @@russellsrandomness I got notices on my phone that said the magnets will make it misbehave. So samsung must have something that detects magnets now.

• 
  @russellsrandomness5 ай бұрын

  @@ColbyMyers interesting, I'd be interested to learn more about that because you are not the first to say they had spen issues.

• 
  @zeropointenergy15745 ай бұрын

  Beautiful.

• 
  @ByronPrice-bb5do5 ай бұрын

  Dude, legend love the way you work

• 
  @thariqabbadmushaf44735 ай бұрын

  Nice car

• 
  @hoonetic5 ай бұрын

  Can you magsafe charge it with the Oh Snap 4? Or did I miss that in your video?

• 
  @LEAVENTU5 ай бұрын

  Shouldnt be Water Cooled at this point? Its massive because the refrigeration system by air....what would happen is it by water/liquid composite? Would it be much lighter and thinner?

• 
  @ohnobro37705 ай бұрын

  Yes they sell 4090s with water pumps already attached but they’re more expensive and look worse imo

• 
  @russellsrandomness5 ай бұрын

  Like @ohnobro3770 said they have water cooled ones. And it is true the heat sink takes up a majority of the room. I'm up for the challenge of trying to make it fit though!

• 
  @MikeKraemer875 ай бұрын

  It truly do be random though.

• 
  @russellsrandomness5 ай бұрын

  That's the way she goes.

• 
  @barretwaltz66315 ай бұрын

  What about testing the wireless charging? Have you had any problems combing the Luxe 4 and a case on a charger?

• 
  @geekmode5 ай бұрын

  Warning! Magsafe charging does not work through a Mous Limitless 5.0 case

• 
  @Juancmason5 ай бұрын

  I also have a Mous Limitless 5.0 case. Mine didn’t work for other chargers and I contacted Ohsnap. They said to get a MagSafe charger from them and I did. The charging does work with their charger and for some reason, started to work with the other chargers. I can’t get them to work with certain chargers, however, I can charge through about 90% of MagSafe chargers in the wild. This includes the 3-in-1 chargers, and certain car wireless chargers.

• 
  @russellsrandomness3 ай бұрын

  after a lot of use this is similar to my experiences, some wireless chargers work fine, some are really picky about position, and some just flat out dont work. I havn't tried a magsafe though just wireless pads

• 
  @rmd16295 ай бұрын

  Quote from Forespar FORESPAR® MARELON® Thru-hull/seacocks are corrosion free and provide great peace of mind in that regard. They are relatively maintenance free. Generally, lubrication is not required. What is required is to open and close them on a regular basis (4 times a year minimum). The frequency this is required is determined by two (2) things, whether the valves are routinely kept open or closed, and the rate of sea growth (weed and barnacles) in your area. If the rate of fouling is high and the valves are not actuated regularly, this build up of growth can cause any valve to turn hard or not at all. If the valve becomes stiff due to lack of use and sea growth build-up, it must be cleaned. The restriction of flow into the valve may cause harm to the machinery it serves and the valve may seize if not maintained. DO NOT DISASSEMBLE VALVE OR LOOSEN BOLTS EXCEPT IN EXTREME EMERGENCIES. All valves are factory pressure tested before shipping. Any adjustments to the bolts will void this testing and may void warranties. All MARELON® integrated valves have a removable plug in the handle (white cap with loop). This plug is made to fit into the external thru-hull (non-screened style only). In an emergency, this plug can be placed in the thru-hull (water pressure will keep it in) and the valve disassembled while the boat is in the water. Someone must get wet, but the boat does not need to be hauled for valve repairs. By tying a lanyard to the cap, you need only get wet once.

• 
  @0718dm3 ай бұрын

  I have been told that some surveyors frown on Merelon as well as insurance co's.

• 
  @rmd16295 ай бұрын

  Marelon thru hulls have straight / parallel threads, they are Not tapered. There are marelon fittings with straight threads available to fit into to the top and the bottom of the marelon thru hull. The grey fitting on you original marelon thru hull may have been tapered thread, your boat builder may have used the incorrect fitting.

• 
  @russellsrandomness5 ай бұрын

  It was a 1985 boat, I assume the previous owner or builder, or some boat mechanic along the way used the wrong fitting. I've since sold her. Was a sad day, but it is nice not worrying about slip fees and storms.

• 
  @gripped61845 ай бұрын

  Just got mine in today. So far so good. Feels way more premium than the 3. Took a little over a week to get it from purchase to delivery

• 
  @TOMVUTHEPIMP6 ай бұрын

  Word salad of wrong and bad information.

• 
  @anrn53036 ай бұрын

  can it be restuck to use same snap on different cases?

• 
  @russellsrandomness3 ай бұрын

  I have had some work fine on the 2nd case, and some that the adhesive does get a bit messed up when removing.

• 
  @luisalexigarcia76756 ай бұрын

  Bien, me pueden restaurar uno del 52 y enviármelo a cuba?

• 
  @judweggis6 ай бұрын

  Does OhSnap Grip hold on a magnetic case without sticking?

• 
  @koreanpizza176 ай бұрын

  just got mine few days ago hehe. great vid sir!

• 
  @abeo2226 ай бұрын

  Does this work with a magnetic car mount?

• 
  @manazo166 ай бұрын

  I just spent time watching Part 1 and Part 2. All i can say is THANK YOU!

• 
  @EMDNT6 ай бұрын

  DISCOUNT CODE?

• 
  @thatguysalbbl32706 ай бұрын

  I commented below somewhere, but I got an email from the company saying: " Thanks so much for reaching out and awesome question! Yes, unfortunately during our testing with the s-pen there is interference caused by the magnetic field created by the Snap 4. If you have any other questions, please don't hesitate to reach out!" what's your take and experience so far with this issue? can you provide a video with how it's working with S pen? Please.

• 
  @DragonoidForm6 ай бұрын

  I hav the snap 3 n I've owned both the snap 1 n 2 as well, but I haven't bought the snap 4. From my experience, I used to have this problem with the magnet interfering with the s-pen when I bought the snap 2 n 3 where we could directly put it on the case without metal ring. However, snap 1 didn't hav this problem with the s-pen bc the grip was attached to a metal ring. In other words, simply adding a metal ring between the snap 4 n ur phone case might solve ur issue with the s-pen, but it kind of ruins the point of the adhesive it came with and adds a little thickness to the grip (it still charged tho bc I have a thin case so the added thickness didn't affect my wireless charging).

• 
  @crstothard6 ай бұрын

  Great review! Thanks for uploading! Can this be used with a magnetic phone mount in the car?

• 
  @cinviva6 ай бұрын

  Thanks for the vid!

• 
  @MrBorderdown6 ай бұрын

  I can't believe people are paying 40$ for this ridiculously fragile thing thtypu attach 800-1500$ phones on. Watching you play with it, it looks like you're going to break the hinges in like a week. Also you really need to align it with your wireless charging ring. It's never dead center.

• 
  @russellsrandomness5 ай бұрын

  I have had no issues with wireless charging, nor things breaking unexpectedly. It looks fragile, but is actually quite robust.

• 
  @tng24326 ай бұрын

  Talks about all the feature of a pop socket except the feature that makes a difference. The MagSafe charging!!! How good/fast is it? Does it work on MagSafe stand?

• 
  @GReviewz6 ай бұрын

  Can you charge via MagSafe through it? Will it work if trying to use a MagSafe car mount?

• 
  @ShroudOfAgony6 ай бұрын

  Yes and yes. I’m not using the actual Apple MagSafe charger but an ESR and it works nicely

• 
  @Eureeka137 ай бұрын

  Just to be clear, your case is not magnetic? In the video It sort of looks like it had magnetism pulling it down when you were sticking it. But perhaps that's just the phone itself? In any case, the adhesive is strong enough to handle being pulled off of, say, a MagSafe mount? Thanks very much for the very clear video!

• 
  @russellsrandomness6 ай бұрын

  My phone and case are not magnetic, it is just held on by the adhesive and i have not had any issues with it coming off. Pretty strong stuff.