Пікірлер

• 
  @JacobLambeCarGuyАй бұрын

  One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?

• 
  @iels73462 ай бұрын

  Reading all these comment are sad, I was looking at Talons, but hearing about Hondas customer service sounds awful. I went with a KRX, figured its slower but they make superchargers for them now, ill probably slap one on a few years down the line, most of our riding is crawling anyways. Kawasaki customer service has been fantastic for my 2 buds that have KRXs. Never had issues getting things taken care of under warranty. The dealer probably matters too. There are definitely dealers who just straight up don't want to out forth effort.

• 
  @ivandasilvadias49662 ай бұрын

  Sistema muito prático , gostei!!!!!

• 
  @DualSportGuy2 ай бұрын

  No you have to order it for low or high.

• 
  @TheZakkmylde2 ай бұрын

  Can you still use the adjustable seats heights with the seat?

• 
  @TheZakkmylde2 ай бұрын

  I got a question. Wirh a new Africa twin Honda if you get a Corbin seat can you still use the high and low positions feature for example if you get the one piece or separate seats ? How’s that work

• 
  @jimmywallace26873 ай бұрын

  We have a trip planned in two weeks, haven't been there for several years. Nice video

• 
  @deonnimb95053 ай бұрын

  I am amazed that Honda even needs to have more than one spec for the silencers. I still have my 2017 which does not have bolts to secure those tubes but are welded in place. The tips of those tubes also do not have the gauze screens that yours has. I managed to get hold of a brand new, unused 2017 canister which I cut all along the rear weld exposing the tubes and the inner baffle plates. I cut the tubes back as short as I could and drilled several 10mm holes into the baffle plates to the point where I could no longer reach. I then welded (stainless) the two bits of the silencer back together, not sure of what this mod would produce. On startup it may have a little bit more throatiness, but hardly that you would notice

• 
  @yaknowwhothis51024 ай бұрын

  So just because I didn’t hear it, this truck is a stock truck that all you did was install the extended struts on it up front ? Or you install upper control arms as well?

• 
  @DualSportGuy3 ай бұрын

  No it does have the upper control arms to . I got the kit with the extended shocks and control arms. I’ve had it for almost 4 years now, with zero issues. Plus everyone that rides with me, love the smooth ride.

• 
  @yaknowwhothis51023 ай бұрын

  @@DualSportGuy what was the measurement from the ground to the top of the wheel opening in the front and rear with the stock 18’s if you remember?

• 
  @DualSportGuy3 ай бұрын

  @@yaknowwhothis5102 no I didn’t write them down

• 
  @skydaddy24264 ай бұрын

  How have you been liking the seat? I just ordered mine tonight and im pretty excited for it.

• 
  @DualSportGuy4 ай бұрын

  I like it , I got the lowered one. My wife really likes it, the rear has a little bigger footprint plus I ordered the backrest. And it looks great

• 
  @mikeherber83584 ай бұрын

  Honda does have a belt ???????????????????

• 
  @DualSportGuy4 ай бұрын

  No belts all gears

• 
  @Shock19884 ай бұрын

  I did everything exactly the way you described but all my lights go on when switched to high or low beam, any idea why?

• 
  @DualSportGuy4 ай бұрын

  Double check your high and low wires. Just make sure you didn’t cross something, next would be the relay itself. Just make sure the relay is hooked up correctly.

• 
  @Shock19884 ай бұрын

  Does it call for a normally open relay or a normally closed?

• 
  @DualSportGuy4 ай бұрын

  @@Shock1988 that I don’t know

• 
  @sailingzigzags65114 ай бұрын

  Got a 17 thinking of doing the exact same thing

• 
  @DualSportGuy4 ай бұрын

  Man the DCT is awesome, you hammer this thing and the front wheel is off the ground. I love this bike.

• 
  @sailingzigzags65114 ай бұрын

  Beautiful bike

• 
  @Ken-pp4gc4 ай бұрын

  That fuse block has a cover for the fuses but the wire terminals are not water tight, how would you recommend water sealing it?

• 
  @DualSportGuy4 ай бұрын

  Just apply other liquid tape or dielectrial grease

• 
  @billybessy4 ай бұрын

  Hello, I have two questions 1. What is the maximum wattage accessories I can hook up to my 2021 Honda Talon 1000r. 2. Does Honda make an upgrade to the charging system ? Thank you

• 
  @DualSportGuy4 ай бұрын

  I’ve never checked on max wattage, and I’ve never heard of an upgrade on the charging system, that’s why everyone put two batteries in.

• 
  @billybessy5 ай бұрын

  Nice Talon 👍🏻. A couple of Questions… 1. What size tires are you running? 2. Where did you get the cool Honda Racing Flag on your garage door ? Thank you. Will

• 
  @DualSportGuy5 ай бұрын

  Pro comp triple threat 10/33/15. The flag I got off of eBay

• 
  @JordanLogue5 ай бұрын

  I have a 2017 ponieer 1000. doing the same thing. in my opinion honda should recall this and fix them all

• 
  @DualSportGuy5 ай бұрын

  I agree, luckily mine was covered under warranty.

• 
  @Cops-R-Bad6 ай бұрын

  Its a good kit…more agressive

• 
  @Cops-R-Bad6 ай бұрын

  If your looking to always go 50-60 mph, don’t buy this kit. If you want to pull wheelies in high gear from a full stop….buy this kit.

• 
  @Cops-R-Bad6 ай бұрын

  I love the result…more snappy, yes…you lose some smoothness. Isn’t that the point?

• 
  @Cops-R-Bad6 ай бұрын

  You lose some smoothness, but you get more snap. Period

• 
  @williamvestal83607 ай бұрын

  I've used the orion since it came out. Absolutely love it . If you can't BBQ or cook . They will never know the difference when you use it . Such a great product. And love the tip about " Dale's " in the drip pan . Very nice point Great job

• 
  @katrinasherryshow7 ай бұрын

  First thought for the 23 touring ,,, I want one!!! Second thought for the 23 touring shit there’s no freaking brakes they suck

• 
  @DualSportGuy7 ай бұрын

  Lmao

• 
  @davidsawmandave87319 ай бұрын

  Nice setup, will the 30 amp possibly run a winch ? I am totally new to this sport and just picked up my rig last weekend and want a nice fuse panel to run a couple things plus the winch , do u still like this device

• 
  @DualSportGuy9 ай бұрын

  Still like it, your winch should tell you what size breaker to use. If you have anymore questions just ask.

• 
  @davidsawmandave87319 ай бұрын

  Thats what I don't know , I am figuring 3500 lb size not the biggest one out there , I am on the fence by wiring my own switches and put in the blank knockouts provided by honda or go your route , I see u have both , this is my first rig so I know nothing about them

• 
  @DualSportGuy9 ай бұрын

  @@davidsawmandave8731 so you wouldn’t be able,to wire the winch to the auxbeam panel. You’ll have to switch for it. I order a blank 3d printed panel. And just move the auxbeam panel down a little. I guess I need to do a update video, about how I’m running it now.

• 
  @78cobra9 ай бұрын

  Thanks for the video. Damn that is one beefy trailer!

• 
  @perrya48789 ай бұрын

  anyone know what odyssey battery is use to replace the STOCK original battery?

• 
  @user-ph6pw8ut8k10 ай бұрын

  I know you posted this video a couple years back but could you post a few more pics of the fuse block that way I could see more of the wiring set up. Thank you

• 
  @DualSportGuy10 ай бұрын

  Is there a specific area, it would be awhile before I could get so pictures.

• 
  @user-ph6pw8ut8k10 ай бұрын

  How to hook up the relay

• 
  @DualSportGuy10 ай бұрын

  @@user-ph6pw8ut8k do a google search, for how to wire in a relay. It’s not hard to do, but have a diagram helps to understand it better.

• 
  @user-ph6pw8ut8k10 ай бұрын

  Ok, thank you sir!

• 
  @DualSportGuy10 ай бұрын

  @@user-ph6pw8ut8k if you have any problems, just let me know

• 
  @RideOnBrother11 ай бұрын

  kzread.info/dash/bejne/fK6blLqMeqqzh5M.html

• 
  @Jamie-zt2gz11 ай бұрын

  Did it improve horsepower and fuel economy in any way? Great video cheers Mate

• 
  @DualSportGuy11 ай бұрын

  It feels like the low end, gained a little. Gas mileage no.

• 
  @reedccroft11 ай бұрын

  I really like the videos. Keep them coming. We're did you buy the lights from and/or what package did you get?

• 
  @sergiolopez9297 Жыл бұрын

  How goes with the fuel ?

• 
  @terrystratford1235 Жыл бұрын

  I'm thinking about doing This! Apparently it will make the engine run slightly leaner!?

• 
  @nombr Жыл бұрын

  Good video! Do you happen to have a link for that video epi put out?

• 
  @nombr Жыл бұрын

  Nvm found the one for 14/15s lol

• 
  @TexCoDirt-gm5co Жыл бұрын

  Hey man, I’m going to install on a dump truck. A project I’m doing is requiring us to have a back up cam. I’m going to run cable all the way up into the cab. How long are they, will I need extension? Thank you

• 
  @DualSportGuy Жыл бұрын

  IT’s wireless just need power and your reverse lights

• 
  @user-dk3rg5xp2c Жыл бұрын

  May I know more detail about the power source to BC50 ? I would like to install on my tesla model Y in front of car as you did. Consider car warranty, I would like to try using the cigarette lighter for BC50 power connection But I am not sure how to choose the spec of cigarette lighte. Could you give me some comment ?

• 
  @austindeehan9723 Жыл бұрын

  Did the outside of your tires wear prematurely? I have the same lift and no alignment has fixed the issue

• 
  @johannc9427 Жыл бұрын

  Awesome - thanks for the detail and time you put into making this! Can you please provide more info on the breaker switch ? Thanks! Johann

• 
  @johannc9427 Жыл бұрын

  Awesome video. This is helping me a lot with where to install the relay part and the switch part. Did you use only the bracket that came with the switch, or did you make another one? Thanks!! Johann

• 
  @Tilburger72 Жыл бұрын

  Thanks for your review. I suppose you are using the camera and the Tread now for 8+ months. My main concern is about a delay between switching on the camera and the live view then parking our car. We have a Landrover Defender and live in busy town in the Netherlands. Suppose I want to park in a busy street and put the car in reverse... Is the camera view then quickly available and is there a delay in the view? Thanks for sharing

• 
  @DualSportGuy Жыл бұрын

  It’s not bad, doesn’t delay that long.

• 
  @samhartfieldlewis5247 Жыл бұрын

  Good question was also wondering about that.

• 
  @tom73055 Жыл бұрын

  DID YOU INSTALL ANY DI0DES ON THIS SET UP TO PREVENT CURRENT BACK FEEDING TO LIGHTS ,ECT WHEN SWITCHING OFF THE RELAYS?

• 
  @terrykirkland-ve3ev Жыл бұрын

  You have any pic’s or videos with the new tires on??? I have the same model/ year tundra but in the wind chill pearl. I’m looking to do the 3.5 rough country lift. But I’m unsure of what size wheels/ tires I want. I’m trying to not stick out past a inch or 1 1/2in. Yours looks great! 1

• 
  @terrabeara6253 Жыл бұрын

  Hi! I'm Terra, the Receptionist for Corbin. THANKS for sharing your enjoyment of your Corbin seat! Bike looks gooood!

• 
  @DualSportGuy Жыл бұрын

  Thank you, love the seat you guys knocked it out of the park.

• 
  @182mcg1 Жыл бұрын

  Inpossible but is two different exhaust on my version is this pipe welded permanently not bolted

• 
  @DualSportGuy Жыл бұрын

  Yes there are two different models

• 
  @911BERALDO10 ай бұрын

  A minha AT 1100 AS 2022 japanese ... Não consigo retirar, não tem esse parafuso para retirada só filtro

• 
  @ShawnMetz-tq2cr Жыл бұрын

  What wheels are those?

• 
  @DualSportGuy Жыл бұрын

  No limits

• 
  @coltjester Жыл бұрын

  Don’t worry about the install videos, you’re doing great with the overview/review stuff. Keep it up 👍

• 
  @tom73055 Жыл бұрын

  You did an great job installing the gaskets on the doors .I BOUGHT THE SAME MIRRORS AND THEY ARE FAIR I HAD TO APPLY SILICONE SEALER ALL AROUND THE GLASS FRAME BECAUSE MINE STARTED TO SEPARATE FROM THE BACKING ,THE BRACKETS FOR THE MIRRORS NEEDED TO BE BENT IT ALIGN AND LOOK UNIFORM TO THE DRIVER SIDE . THANKS FOR THE VIDEO ENJOY YOUR TALON

• 
  @imopn Жыл бұрын

  I was so surprised seeing that adjustment bolt on that centre stand. I never saw that before on their product pages, I think. That is really cool

• 
  @DualSportGuy Жыл бұрын

  Worked out great

• 
  @imopn Жыл бұрын

  @@DualSportGuy Yeah must be a change. I watched other videos now too and it never used to be like that. See link I pasted. REally hope this is not the default design: kzread.info/dash/bejne/fYh6xMNviajUd7w.html

• 
  @jmdhintz Жыл бұрын

  Where’d you get those American flag overlays for the Honda logos?

• 
  @DualSportGuy Жыл бұрын

  Creativeutvgraphics.com

• 
  @DualSportGuy Жыл бұрын

  Thanks I think it’s a better way to go.

• 
  @bethelbigb Жыл бұрын

  Where did you get the bed extender. And where you get the front LED light mounts by the windshield

• 
  @thomasjefferson5727 Жыл бұрын

  MURS pronounced as 'meers' is making me itchy.