I am amazed that Honda even needs to have more than one spec for the silencers. I still have my 2017 which does not have bolts to secure those tubes but are welded in place. The tips of those tubes also do not have the gauze screens that yours has. I managed to get hold of a brand new, unused 2017 canister which I cut all along the rear weld exposing the tubes and the inner baffle plates. I cut the tubes back as short as I could and drilled several 10mm holes into the baffle plates to the point where I could no longer reach. I then welded (stainless) the two bits of the silencer back together, not sure of what this mod would produce. On startup it may have a little bit more throatiness, but hardly that you would notice

You can't beat a free mod. It's good to leave the screens on especially if your riding off road. The Forest Service here checks quite often.

Like watching your tongue when you're putting the bolts in. Good video.

@DualSportGuy

2 жыл бұрын

Lol done that my whole life, everyone always laugh’s at me for it.

It sounds even better if you cut off the spark arrestors. FYI.

Thanks for videos rely enjoy them I'm from Portugal I have a 2021 africatwin an I would live to do that modification But it seames my exaus parts ar welded or is it just a cover ?

@nelsonsimoes477

Жыл бұрын

Would like to send you a picture of the exaus if you interested

@DualSportGuy

Жыл бұрын

I have heard the the non US bikes are welded. That suck’s because it’s a easy and great mod.

@182mcg1

Жыл бұрын

On my as well. Possible different bikes on Europe and America

How have you found the mod? Any issues? When you shortened that pipe it eliminates a chamber in the exhaust that the gases have to travel through in the muffler, thinking of doing mine.

@DualSportGuy

2 жыл бұрын

No issues,and great sound.

@davidsimmons3844

2 жыл бұрын

@@DualSportGuy thanks for the reply, my twin is apart was waiting to see if it worked out, I'm going to do it then, thks for posting video.

@jp5929

Ай бұрын

Won't it create turbulence inside the actual muffler if the pipes are shorter? Have you had any issues since you've done it 2 years ago?

Inpossible but is two different exhaust on my version is this pipe welded permanently not bolted

@DualSportGuy

Жыл бұрын

Yes there are two different models

@911BERALDO

11 ай бұрын

A minha AT 1100 AS 2022 japanese ... Não consigo retirar, não tem esse parafuso para retirada só filtro