This is how i've installed my second battery, and wiring on my Honda talon.
Жүктеу.....
Пікірлер: 20
@1stvideoproductions734 Жыл бұрын
You started off good and then through us into a loop when it was already hooked up. I’m lost. Thanks anyway
@tom73055 Жыл бұрын
DID YOU INSTALL ANY DI0DES ON THIS SET UP TO PREVENT CURRENT BACK FEEDING TO LIGHTS ,ECT WHEN SWITCHING OFF THE RELAYS?
@johannc9427 Жыл бұрын
Awesome - thanks for the detail and time you put into making this! Can you please provide more info on the breaker switch ? Thanks! Johann
@jacobknox152 жыл бұрын
I'm trying to get all of this started on my talon. I ordered the xtc busbar key on kit. I also want to do dual batteries and the aux beam. I noticed the aux beam has a key on power but I don't know how to do key on without the xtc. I guess I'm asking what all do I need to do this without the fuse box you have amd do I need the xtc key on kit of I buy the Aux beam? Thank you so much for your help
@DualSportGuy
2 жыл бұрын
The key on kit, is nice for like USB ports and things like that. The auxbeam is for bigger things like lights etc. So you would hook the auxbeam key power, to your xtc.
@rubenlujan3326 Жыл бұрын
What is that white box to the left
@kens74792 жыл бұрын
So, since you've installed the system is there any changes, issues or things you would do differently if given the opportunity? I have a 2021 Talon R SE and looking to install a dual battery and a clean system for wiring, ie; auxbeam or something else called custom wire kits? Thank you in advance and I may have more qstns for you when doing install, if ok?
@DualSportGuy
2 жыл бұрын
I’ve no issues at all, still love the setup.
@perrya487810 ай бұрын
anyone know what odyssey battery is use to replace the STOCK original battery?
@R_Arizona2 жыл бұрын
When you wired the dual volt meter with the blue and green wire, which connectors did you put the wires on in the back of the volt meter? Also, which is for the ground on the back of the volt meter?
@DualSportGuy
2 жыл бұрын
I used the true isolator kit. So the meter was marked, the ground goes through a relay.
@R_Arizona
2 жыл бұрын
@@DualSportGuy I’m using the same relay. Got it. Thanks!!
@jz3r9n2 жыл бұрын
Why do you have the Auxbeam AND a Fuse Box ?
@DualSportGuy
2 жыл бұрын
The fuse block, is only for low draw things. Like my USB ports , led console light etc.
@luiscavazos700 Жыл бұрын
Hey bud can you give me the link or what kit i need to do the same on my talon?
@DualSportGuy
Жыл бұрын
The battery tray, is from elite SxS engineering , and I used the true isolator kit. Super easy install, and works great.
@dukat032 жыл бұрын
So to be clear, the way you have it hooked up the 2nd battery is only charging, everything else is coming off the Talon battery.
@DualSportGuy
2 жыл бұрын
No everything but the winch, is coming off the second battery.
@dukat03
2 жыл бұрын
@@DualSportGuy The cable going to your fuse box should be coming between the second battery terminal and the isolator not after the isolator otherwise it takes battery power from the main battery.
@DualSportGuy
2 жыл бұрын
@@dukat03 in reality both batteries are being used by the machine. All the dual battery setup does, is give you longer power.
Пікірлер: 20
You started off good and then through us into a loop when it was already hooked up. I’m lost. Thanks anyway
DID YOU INSTALL ANY DI0DES ON THIS SET UP TO PREVENT CURRENT BACK FEEDING TO LIGHTS ,ECT WHEN SWITCHING OFF THE RELAYS?
Awesome - thanks for the detail and time you put into making this! Can you please provide more info on the breaker switch ? Thanks! Johann
I'm trying to get all of this started on my talon. I ordered the xtc busbar key on kit. I also want to do dual batteries and the aux beam. I noticed the aux beam has a key on power but I don't know how to do key on without the xtc. I guess I'm asking what all do I need to do this without the fuse box you have amd do I need the xtc key on kit of I buy the Aux beam? Thank you so much for your help
@DualSportGuy
2 жыл бұрын
The key on kit, is nice for like USB ports and things like that. The auxbeam is for bigger things like lights etc. So you would hook the auxbeam key power, to your xtc.
What is that white box to the left
So, since you've installed the system is there any changes, issues or things you would do differently if given the opportunity? I have a 2021 Talon R SE and looking to install a dual battery and a clean system for wiring, ie; auxbeam or something else called custom wire kits? Thank you in advance and I may have more qstns for you when doing install, if ok?
@DualSportGuy
2 жыл бұрын
I’ve no issues at all, still love the setup.
anyone know what odyssey battery is use to replace the STOCK original battery?
When you wired the dual volt meter with the blue and green wire, which connectors did you put the wires on in the back of the volt meter? Also, which is for the ground on the back of the volt meter?
@DualSportGuy
2 жыл бұрын
I used the true isolator kit. So the meter was marked, the ground goes through a relay.
@R_Arizona
2 жыл бұрын
@@DualSportGuy I’m using the same relay. Got it. Thanks!!
Why do you have the Auxbeam AND a Fuse Box ?
@DualSportGuy
2 жыл бұрын
The fuse block, is only for low draw things. Like my USB ports , led console light etc.
Hey bud can you give me the link or what kit i need to do the same on my talon?
@DualSportGuy
Жыл бұрын
The battery tray, is from elite SxS engineering , and I used the true isolator kit. Super easy install, and works great.
So to be clear, the way you have it hooked up the 2nd battery is only charging, everything else is coming off the Talon battery.
@DualSportGuy
2 жыл бұрын
No everything but the winch, is coming off the second battery.
@dukat03
2 жыл бұрын
@@DualSportGuy The cable going to your fuse box should be coming between the second battery terminal and the isolator not after the isolator otherwise it takes battery power from the main battery.
@DualSportGuy
2 жыл бұрын
@@dukat03 in reality both batteries are being used by the machine. All the dual battery setup does, is give you longer power.