Пікірлер

• 
  @johnoneill326017 сағат бұрын

  Can I ask how it looks after a few years. I find these t&g boards always move about or perhaps that is why you put glue under ?? Great Video

• 
  @Bacrenfencing14 сағат бұрын

  It's still fine, as it has been maintained (painted). The key to keeping gates in good condition is to paint them often. Thanks for the comment

• 
  @alaindemiddelaer4809Күн бұрын

  My K5 did not turn on. While I was watching videos to by me a new one I came accros your video. And indeed after 5 minutes my pressure washer came alive again. Thanks.

• 
  @BacrenfencingКүн бұрын

  Glad I could help

• 
  @peterzinia37672 күн бұрын

  You didn't do anything to prevent moisture from getting into the wall where you drilled. You should shoot some caulk of sealant in the hole you drilled before putting the fastner i

• 
  @Bacrenfencing2 күн бұрын

  It's a cavity wall, like most walls here in the UK, so no need. Also, the fixings did not go through the first course of brick, so no moisture would get in anyway. Thanks for the comment

• 
  @JayGillUK3 күн бұрын

  2 yr old K2 now working. Brilliant - thank you

• 
  @Bacrenfencing3 күн бұрын

  Glad it helped mate !

• 
  @rehber44 күн бұрын

  Thanks

• 
  @Bacrenfencing3 күн бұрын

  No problem

• 
  @rbernardo47484 күн бұрын

  Four years on, still a legend, bought a K2 wouldn't fire up. Life saver

• 
  @Bacrenfencing4 күн бұрын

  Doesn't feel like that long ago I made this video.........time flys !

• 
  @peteranderson524 күн бұрын

  Thank you!!!

• 
  @Bacrenfencing4 күн бұрын

  😎👍

• 
  @disshankchauhaan86525 күн бұрын

  Can it cut skin ?

• 
  @Bacrenfencing5 күн бұрын

  Human or animal ? 😂

• 
  @disshankchauhaan86525 күн бұрын

  @@Bacrenfencing your skin.

• 
  @Bacrenfencing5 күн бұрын

  @@disshankchauhaan8652 YEP !!

• 
  @disshankchauhaan86525 күн бұрын

  @@Bacrenfencing u r wrong. It can not cut skin if it is oscillating saw. Just try it. And u will be surprised.

• 
  @disshankchauhaan86525 күн бұрын

  @@Bacrenfencing it can't cut skin as it is oscillating tool. Just try it and u will be surprised.

• 
  @brett90975 күн бұрын

  Just worked to fix my K2, thanks. I was just about to bin it when I saw this

• 
  @Bacrenfencing5 күн бұрын

  Glad I could help

• 
  @kenanoz22047 күн бұрын

  I was about to throw away. Luckily watched your video and sort the problem out. Happy days 😊 Thanks a lot

• 
  @Bacrenfencing7 күн бұрын

  Glad it helped mate !

• 
  @kobuslouw28547 күн бұрын

  Thanks a lot for this. I was on my way to buy a new K2.360 as it stopped to work like yours. I followed your instructions and it works! Thanks a lot from Cape Town, South Africa

• 
  @Bacrenfencing7 күн бұрын

  Thanks for the comment and greetings from Scotland UK 😊

• 
  @mystreteacher7 күн бұрын

  Does screwing holes though the PostSaver void the warranty?

• 
  @Bacrenfencing7 күн бұрын

  No, I don't think so as both products are from the same company.

• 
  @Kkuk848 күн бұрын

  I’ll spare you the details but u have just saved the day with this video, top man!

• 
  @Bacrenfencing8 күн бұрын

  Great, thanks for the comment !

• 
  @olgachanachowicz28619 күн бұрын

  Hi, I am adding a railing to my small front stoop. I have 4x4 posts and I want to attach one of them to the house. The house wall is brick but it is EXTREMELY uneven. I don't know what to call that type of brick but they are full of bumps and when I place anything straight and flat against that wall, I see spaces as big as 1/2" - or even more. Do I need some kind of shims to put between the 4x4 and the house wall? If so, how do I attach those shims behind the post. I don't want concrete/masonry screws to show behind the post and I don't know what to do. Please help. I would really appreciate it. I have seen quite a few videos on KZread but I haven't seen a case where the bricks are so uneven. I would appreciate your advice. Kind regards.

• 
  @Bacrenfencing9 күн бұрын

  Just attach the post like I did in this video and then use fence slats scribed to the wall to cover the gaps between the post and the wall. No need to shim if you have a couple of good points of contact.

• 
  @olgachanachowicz28619 күн бұрын

  @@Bacrenfencing Thank you so much. But please tell me: what do I need to I scribe fence slats. I don't have a lot of tools. Once it is done, how do I attach them to the wall? Please forgive all these questions. I am a senior and try to learn from KZread. Do you have a drawing or a video I could see?

• 
  @woodcote759 күн бұрын

  Thanks, this saved my arse today, top man.

• 
  @Bacrenfencing9 күн бұрын

  😂

• 
  @jnieuwerf9 күн бұрын

  Thank you so much, it worked!

• 
  @Bacrenfencing9 күн бұрын

  You're welcome!

• 
  @stevehart50729 күн бұрын

  Thank you so much, your tip worked for me

• 
  @Bacrenfencing9 күн бұрын

  Glad it helped

• 
  @GeryTeague10 күн бұрын

  Shadow line is better. If you've got a small shop, then the space savings of the Makita win-out. If you also have measured stops for repeat cuts in your shop, then the line doesn't really matter.

• 
  @Bacrenfencing10 күн бұрын

  Agreed, I use the makita for the space saving and also use the dewalt for angled cuts using the shadow line, so much easier to get an accurate cut with the shadow line. The Makita laser is terrible.

• 
  @scottmclaughlin514210 күн бұрын

  I tried it before taking karcher apart and it worked,thank you so much for awesome tip

• 
  @Bacrenfencing10 күн бұрын

  You're welcome!

• 
  @pateril10 күн бұрын

  Magic! Worked a treat - thank you for posting :-)

• 
  @Bacrenfencing10 күн бұрын

  You're welcome!

• 
  @KarmeshMadhavi10 күн бұрын

  6:30 man. we can't see the blade.

• 
  @Bacrenfencing10 күн бұрын

  it's just a flat blade with a curvy edge as seen in the footage after 6:30

• 
  @ZS-bd1vm11 күн бұрын

  Fantastic and informative. Got mine working in 5 mins. Saved me from replacing my washer.

• 
  @Bacrenfencing11 күн бұрын

  Great to hear!

• 
  @davidmacdonald440612 күн бұрын

  What if you have water going in but nothing coming back through? Does the pump have a safety of any kind to block water flowing through it?

• 
  @Bacrenfencing12 күн бұрын

  Sounds like a simple blockage to me, should be easy enough to fix.

• 
  @Undead_Life12 күн бұрын

  Worked for me, but I also had to disconnect the hose at the unit and let it run for 10 mins. Thanks so much 👍

• 
  @Bacrenfencing12 күн бұрын

  Glad it helped

• 
  @bimalkumar781012 күн бұрын

  Thanks mate it worked for me, I was literally to buy a new one today. Cheers

• 
  @Bacrenfencing12 күн бұрын

  Glad I could help, great that this saved you money !

• 
  @rudizupancic184012 күн бұрын

  Thanks👍

• 
  @Bacrenfencing12 күн бұрын

  No problem 👍

• 
  @philedwards8813 күн бұрын

  You absolute hero 😊😊

• 
  @Bacrenfencing13 күн бұрын

  Thanks !

• 
  @Eric-mp4ft13 күн бұрын

  Washed the drive court, everything was ok! Then it stopped, the K4 kept tripping the house’s main!! Called the local repair man, says it’s a recurring problem! Time to throw it away and get a new one!! Only used it 5-6 times and it’s only 4-5 yrs old!!! WTF

• 
  @Bacrenfencing13 күн бұрын

  not good !

• 
  @liamgrant471614 күн бұрын

  IF THIS DOESN’T WORK!!! Try this because i was trying this method for hours with no joy… Plug the unit in and SWITCH IT ON. Attach the water and turn it on to the best pressure you can get. Leave the GUN PART attached with no attachment on. Spray water through the gun and shake the unit around to help clear the air. After about 30 seconds it will kick into life by itself!!

• 
  @Bacrenfencing14 күн бұрын

  Thanks for the comment, hopefully it helps more people - thank you !

• 
  @andreacole815414 күн бұрын

  You are FANTASTIC !!👍👍👍👍👍👍 Just about to ring Karcher - then I found your video. Saved me a fortune. Thank you so much. You're an absolute star🤩🤩 Just sent a small donation.

• 
  @Bacrenfencing14 күн бұрын

  Thanks Andrea, I'm happy that this worked for you and thank you for the donation - that was very kind of you. All the best !

• 
  @smc796015 күн бұрын

  Does it give this advice in the instructions book when you buy it ? Seems like it should

• 
  @Bacrenfencing15 күн бұрын

  Not to my knowledge

• 
  @firehorse7415 күн бұрын

  Hi How do you refit the plate and kickstand?

• 
  @Bacrenfencing15 күн бұрын

  Not sure, never had to do it

• 
  @firehorse7415 күн бұрын

  @@Bacrenfencing hi thanks for the reply

• 
  @phoebrasl511116 күн бұрын

  Brilliant but when I put the lance hose back on the lance it sort of stops, then I do your trick with no lance on the lance hose machine works perfectly and switch goes off and on like a good’s. Any more pearls of wisdom and thanks so much for sharing

• 
  @Bacrenfencing16 күн бұрын

  Not sure ?

• 
  @jp521017 күн бұрын

  Have you had much issues with the DeWalt gun was thinking of getting one but won't be using it on treated timbers just regular timbers

• 
  @Bacrenfencing17 күн бұрын

  The dewalt has been far more reliable than the paslode to be honest. Not really caused me any issues, I just prefer the power and speed of the paslode, but would certainly recommend the Dewalt.

• 
  @Gabriel-er8pp18 күн бұрын

  Thank you so much for this video. Its exactly what happened.

• 
  @Bacrenfencing18 күн бұрын

  You are so welcome

• 
  @DaveSHarris18 күн бұрын

  Thanks, you just saved me a new jet washer

• 
  @Bacrenfencing18 күн бұрын

  Great to hear, thanks for the comment !

• 
  @jaynelson176218 күн бұрын

  Didn’t work for me, gutted

• 
  @Bacrenfencing18 күн бұрын

  Ah, sorry to hear that.

• 
  @PeteMcGrath118 күн бұрын

  great video thanks for that mate.. will be doing this in a few weeks :)

• 
  @Bacrenfencing18 күн бұрын

  No problem 👍

• 
  @JorgeHernandez-ib1px20 күн бұрын

  Hi great video! I was a little disappointed because I thought that the gate door was going to be installed between 2 stucco walls without fence (according to your thumb nail pic). I really need info on attach post to stucco walls and mounting the gate door between the 2 walls. Maybe you have a video like That? Would like to hear your feedback, thanks!!

• 
  @alfonsosurf20 күн бұрын

  Spot on! Cheers

• 
  @Bacrenfencing20 күн бұрын

  Thank you! Cheers!

• 
  @AKhinch21 күн бұрын

  Didn't fix my problem...

• 
  @Bacrenfencing21 күн бұрын

  👎

• 
  @kimking952522 күн бұрын

  Brilliant thank you so much worked a treat - had almost given up on it!

• 
  @Bacrenfencing22 күн бұрын

  You're welcome!

• 
  @nsdcookies639023 күн бұрын

  Worked like a charm! Thank you!!

• 
  @Bacrenfencing22 күн бұрын

  👍

• 
  @farzeenbashamoodeen681223 күн бұрын

  Worked for my K4 🎉 thank you

• 
  @Bacrenfencing23 күн бұрын

  No problem 👍

• 
  @staceydickinson802123 күн бұрын

  I've been recommended to use stainless steel staples, 1 3/4 in.. do you have any feedback for this?

• 
  @Bacrenfencing23 күн бұрын

  It depends on the type of fence slats that you are fixing ? What is the size of the slats ?

• 
  @shutinyanks24 күн бұрын

  if this fixes my K1 i will kiss you

• 
  @Bacrenfencing24 күн бұрын

  Did it work ?

• 
  @shutinyanks24 күн бұрын

  @@Bacrenfencing Not this time but not because of what is shown in video - the plug was missing the earth it had snapped off! Ordered a replacement power cable hopefully that will be that. Cheers

• 
  @Bacrenfencing24 күн бұрын

  👍

• 
  @martinjimenez787525 күн бұрын

  You need too learn how to use the hammer

• 
  @Bacrenfencing24 күн бұрын

  😎👍

• 
  @adnanreci113726 күн бұрын

  Legend. I dont even have a karcher, have a Lavore. The same exact issue occured. The hose was fixed wrongly onto the pressure gun. As soon as I disconnected it it started working again

• 
  @Bacrenfencing26 күн бұрын

  😎👍

• 
  @poddonnell27 күн бұрын

  Many thanks....just had my finger on the buy now button to replace my K4 ....thought I'd give your video a watch....working perfectly....I wish you well sir.....POD62....

• 
  @Bacrenfencing26 күн бұрын

  No problem 👍

• 
  @leegolle27 күн бұрын

  Thanks You are really a master

• 
  @Bacrenfencing27 күн бұрын

  Happy to help