Thanks for watching and if you enjoyed the content, please consider subscribing to my channel kzread.info/dron/6IWF5LBPAqCwmjXcAGwWJw.html to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊

Sometimes you read my mind! Thanks yet again, watching your videos and re runs more than the telly nowadays.

@Bacrenfencing

2 жыл бұрын

😂 Cheers, hopefully you go on to make one yourself mate. Thanks for the comment, much appreciated 👍😎

Ohhh, I love the way you angled those screws into the frame. Nice job. thanks for the video...I just bought a Makita 8inch mitre compound saw...I'm under 5 feet short...and it still seems a monster. I need a bench for it now,and probably a small platform to raise me up a bit. The first job will be a bench like this, then a small platdform, then a chicken tractor, then a Tiki Hut... hence looking at videos. Very simple and practical. Thanks again.

@Bacrenfencing

Жыл бұрын

Thanks for the comment Mary and good luck with your upcoming projects 😎

Very well built Barry ... 💪👍✅

@Bacrenfencing

2 жыл бұрын

Does the job Steven, I just have the Kreg stop system to add to it which I will do this weekend. Thanks for the comment, much appreciated mate 👍😎

Great content and presentation!

@Bacrenfencing

2 жыл бұрын

Thanks for the comment 👍😎

Great content and presentation! 🙏🏻

@Bacrenfencing

2 жыл бұрын

Glad you liked it and thanks for the comment 👍

Simple build Barry. Looks good. Inspired me to build my own as it looks easy 😬 Hope the Makita meets your expectations. Seems the Dewalt saw is a hard act to follow!

@Bacrenfencing

2 жыл бұрын

Go for it Neil, super easy to build and so convenient to have. The Dewalt is a great saw (one of my favourite tools) but just too big to put on a mitre station. I am still getting to grips with the Makita - it is strange as so used to the Dewalt. Thanks for the comment Neil - much appreciated mate 👍😀

Nice job mate, also nice to hear a Scottish accent for a change! I have the same thing in mind to build but I was thinking of going for Bosch glide 12". At this level they are all top notch saws. I have a cheaper erbauer mitre saw and for £240 it has massive cut capacity but suffers the same drawback as your dewalt in that it's ginormous and space is limited. I'm from Kilmarnock btw, I am a joiner and have a youtube channel, jusgeritdone. I only have 4 vids at the moment but have decided to start getting a bit more serious so working on a new video just now. I built my shop last year and currently working to finish indide. Anyway, I have subscribed to your channel and enjoyed watching this build. It would also be interesting to hear how you get on with the new makita chop saw.

@Bacrenfencing

2 жыл бұрын

Hi there mate, good to hear from you and thanks for the sub. I have not used the Bosch saw but it looks to be a great saw. I have only been using the Makita for a few weeks but really have to say that it is head and shoulders above the Dewalt. Such a great saw to use. The only thing I don't like about it is the laser cut line, it is awful when compared to the excellent Dewalt shadow line. I think Makita are coming out with a shadow line for this model, so if they do, then this would make all the difference. I will take a look at your channel now and wish you all the best with it. KZread is good fun but it is very time consuming if concentrating on it...............hence why my channel is a bit lacking at the moment, it is really difficult getting time to upload content but hope to get more out soon ! Cheers - Barry

@Bacrenfencing

2 жыл бұрын

Have you got a link to your channel mate ? Can't seem to find it ? Cheers

@pgtips4240

2 жыл бұрын

@@Bacrenfencing This will take you to a video on channel.... kzread.info/dash/bejne/dqqisNGykbSsk5M.html

Makati !!!! Can’t beat them, been using them for 25 years, 5mm under, more than a bees wing mate 😄 get rid of the laser,,, just a gimmick, thanks for sharing,

@Bacrenfencing

2 жыл бұрын

I'm growing to love Makita Gary, got the track saw, radio and now the mitre saw..........Dewalt slowly getting phased our 😂 Aye, the laser on the Makita is murder.............Dewalt shadow line is much better. Aye, had to shim it up a "Thochty" need to learn to use a tape ! Good to hear from you 👍😎

@GaryThomsonJoinery

2 жыл бұрын

@@Bacrenfencing that’s me that just liked the comment 👍😄

@Bacrenfencing

2 жыл бұрын

@@GaryThomsonJoinery and that's me that just liked your comment liking my comment from the previous comment :-)

Hi Barry, looks good. Could you tell me how far from the wall does the module you built stick out? I'm looking to purchase the Makita saw for the same reason as you have. Just wondering what the footprint is. Cheers Dan

@Bacrenfencing

2 жыл бұрын

Hi Dan, I made my module 760mm from the wall to the front. I made it this wide for my own purposes but you could get away with about 600mm if space is an issue. Both of the modules I made are 1200mm x 760mm but you can obviously make them any size you want to suit your individual needs. I hope this helps ? Cheers 👍

@dtdan3186

2 жыл бұрын

@@Bacrenfencing That's great Barry. This helps a lot. Thank you

@Bacrenfencing

2 жыл бұрын

@@dtdan3186 No problem !

Thanks for sharing! What's the height of the middle section where the miter saw sits? I'm trying to build a station for the same miter saw model but I haven't received it yet.

@Bacrenfencing

6 ай бұрын

From the floor to the top of the plywood is 845mm

@noora.9517

6 ай бұрын

@@Bacrenfencing great, thank you! Do these measurements make this Makita perfectly leveled with the work station?

@Bacrenfencing

6 ай бұрын

@@noora.9517 Not perfectly but close, you will likely have to shim the mitre saw up a bit to get it perfect. I just used a couple of plastic shims.

Does the power take off on the Festool say what it’s max wattage is ?

@Bacrenfencing

2 жыл бұрын

Not got a clue Thomas, I will have a look and get back to you 😀

@Tomc12345

2 жыл бұрын

@@Bacrenfencing thanks, I’ve been looking at metabo and online it says 1200 watts on the take off but the makita saw is 1800 watts so don’t wanna get the wrong thing

@Bacrenfencing

2 жыл бұрын

@@Tomc12345 I just looked and the Festool says 1200 watts as well but it works fine with the 12" Dewalt and Makita mitre saws. It also workd fine with the Dewallt table saw. I'm no expert but I think the Metabo would be fine.

@Tomc12345

2 жыл бұрын

@@Bacrenfencing thanks for that 👍🏻👍🏻

Some place big chap .....don't you take offence 😛😛😛😛👍

@Bacrenfencing

2 жыл бұрын

Cheers Ian ! 😎

@iandrain.7277

2 жыл бұрын

@@Bacrenfencing hope u got that joke 👍

@Bacrenfencing

2 жыл бұрын

@@iandrain.7277 I did :-)

@iandrain.7277

2 жыл бұрын

@@Bacrenfencing the pocket holes are the way to go 👍👍👍

@Bacrenfencing

2 жыл бұрын

@@iandrain.7277 Aye, they are great, I use them all the time but I really need to get a better jig. I fancy the larger Kreg set with has a quick clamp built in - that will be my next purchase - Cheers !