Official Rockford Fosgate channel. Rockford Fosgate is a leader in subwoofers, speakers, amplifiers, source units, signal processors, enclosures & accessories that are purpose-built for Mobile, Marine, Motorsports, and Motorcycle applications.
Could u leave the oem grills and just change ouf the speaker? Id like to leave mine as they have harley logo on then
@rockfordfosgate3 күн бұрын
@@andrewward4486 Yes, you can absolutely leave the HD grilles on and just swap out the speaker if you like.
@curt1star054 күн бұрын
Does the infinite baffle 12 inch m2 have a significant advantage over the 10 inch? Most of the specs are similar.
@rockfordfosgate3 күн бұрын
@@curt1star05 The 12” plays lower and will move more air (louder) based on these 2 specs: 10” Fs = 43 Hz / Sd = 363 cm2 12” Fs = 38 Hz / Sd = 539 cm2
@dippa19655 күн бұрын
Since the purchase of this Rockford Fosgate primary Amplifier. I have to pull the nain fuse from time to time to get sound as it inadvertently stops producing sound. Harley Davidson answer to my problem take it to the dealer who is now charging me normal diagnostic rates. Brand new 2024 Roadglide and Amplifier purchased from Harley dealership. I dont foresee the Harley Davidson brand being around much longer producing this type of product. Beyond disappointed to say the least.
@rockfordfosgate4 күн бұрын
Sorry your having intermittent issues. We understand from Harley-Davidson this inadvertent no output from the audio system is caused by Skyline OS, not the amplifier. We would advise the dealership to update the IFCU under warranty and not charge a "diagnostic" rate, because there's nothing to diagnose with the amplifier. Ironically, there is an amplifier update but that is an update to the built-in Dynamic EQ (M-DEQ) settings based on rider's feedback. However, if the shop updates the IFCU, it's just as easy to do the amplifier update as well. You can find out more info on M-DEQ and how it works inside the amplifier here: rockfordfosgate.com/products/system/factory-installed-systems/2024-h-d-road-glide-street-glide/#tech2
@dippa19654 күн бұрын
@@rockfordfosgate - My 2024 is currently at Huntington Beach Harley in So.California. It's a high possibility that I'm going to be charged for the diagnostic per the service writer. Also per the Rockford Fosgate primary Amplifier instructions that came with the aforementioned Amplifier it didn't make mention of updates,flash being required. It was sold to me through the Harley dealer as plug and play of which it seemly was for the sake of conversation. Nevertheless the dealer is now stating while you installed it yourself. I'm like well why would I not if it's plug and play and it doesn't void the warranty if I do it myself. Blah,blah.
@rockfordfosgate4 күн бұрын
@@dippa1965 appreciate the information, and you’re right…this amp is plug-and-play and was developed with Harley-Davidson, so it should not void any warranty. To the best of our knowledge, our technicians started hearing about this with factory systems (untouched with any upgrades) and it appears to be an issue inside Skyline OS. I’m hoping there are service advisories on it by now. Once Skyline is updated, it’s fixed the audio routing issue for every customer we have talked to.
@dippa19654 күн бұрын
@@rockfordfosgate I greatly appreciate your input as you've been of more help then Harley Davidson customer care for sure. I apologize in venting my frustration within this forum however I am beyond disappointed after having purchased a new motorcycle encountering such issues. Here it's the 4th of July weekend and my month old bike is in the shop.
@dippa19652 күн бұрын
@@rockfordfosgate - Update on my situation having picked my 2024 Roadglide up from the dealer this afternoon 7/6/24. Per a verbal conversation with the service writer issue as been resolved. I've to to receive my email copy of the repair order,nevertheless again per our verbal my Roadglides has been updated. Furthermore,I wasn't charged the diagnostic fee of approximately $300.00 dollars I quoted originally. The service writer again communicated that upon receiving the bikes from Harley that they Update the software. So I'll follow-up within a couple days to report if this actually resolved the issue. Thank you for the information concerning my issue I'm most grateful for your input,sir.
@felixlopez25276 күн бұрын
Is that deamau5 music in the background?
@rockfordfosgate5 күн бұрын
Yes, this is before we had to convert to Royalty Free music!
@misayrivera36279 күн бұрын
It goes connected to the bus bar or straight to the battery?
@rockfordfosgate7 күн бұрын
At 13:10 you can see Greg wire the B+ and GND directly to the battery.
@sergiogamez315310 күн бұрын
Is the amp suppose to fit tight. Mine seems to be hitting the steering wheel motor.
@rockfordfosgate9 күн бұрын
It’s very close to the motor, but since the bracket wraps around the tubular frame, you should have some play to get everything roughed in before tightening the bolts.
@Ns9021210 күн бұрын
Just put these in my boat
@rockfordfosgate9 күн бұрын
Awesome! Hope they work well for your application!
@vandityt518210 күн бұрын
Is it give echo output ?? Pls comment back rockford
@rockfordfosgate4 күн бұрын
We're not sure by what is meant by "echo output". The DSR1 does not have any such feature.
@misayrivera362711 күн бұрын
What’s gonna happen to the cigarette outlet plug when installing the PMX-3?
@rockfordfosgate11 күн бұрын
It will still be there, but blocked-off. You can use an extension and route it to another location.
@frankschuster751911 күн бұрын
Hi, how change the language in german? I have change region in europe. but i cant change the language.
@rockfordfosgate4 күн бұрын
Watch this video on changing the language to the available languages setup in the PMX-HD14: kzread.info/dash/bejne/mYlnm8mamrK7ecY.html
@Frank-es2il4 күн бұрын
@@rockfordfosgate Maybe I expressed myself wrongly. I can choose a region, but I can't select a language. It stays in English and I can't select anything else. If I press language, nothing happens.
@rockfordfosgate3 күн бұрын
@@Frank-es2il so when you press the FINISH button, nothing happens? Are you saying the menu remains in English? Can you operate the radio or the menu freezes?
@frankschuster75192 күн бұрын
@@rockfordfosgate I cannot choose another language. The language selection is English and grayed out. All I can do is select the region and press finish. The radio works normally, except that the entire menu navigation is in English. The radio is only two weeks old.
@motofusion633512 күн бұрын
So Rockford is not coming out with a cut kit for the 24 non cvo? Basically saying have to go to Harley purchase cvo style lids that is paint match to your bike to do this setup.
@rockfordfosgate4 күн бұрын
Currently, there is no aftermarket cut-in kit available.
@rhysaguirre696714 күн бұрын
Wait so, the Power amps won't have as good sound quality as the punch amps?
@rockfordfosgate14 күн бұрын
The Power Series amplifiers offer the best we have to offer based on sound quality and performance.
@rhysaguirre696714 күн бұрын
@@rockfordfosgate thank you so much for answering!
@CarlosRamos-dj5vw14 күн бұрын
I thought it’s plug and play. Why do I need to lift the tank?
@rockfordfosgate14 күн бұрын
We run the large B+ and GND cables under the gas tank. On Rushmore models it’s easy to remove when it’s low on gas.
@CarlosRamos-dj5vw14 күн бұрын
@@rockfordfosgate Thank you
@Thizz297914 күн бұрын
I want to tune. Amp for one 10 but I’m running door speakers off headunit so no 4 channel just 500x1 at 2ohm don’t want harm door speakers when tuning
@rockfordfosgate4 күн бұрын
As long as the amplifier power output does not exceed the subwoofer's RMS power handling you should be fine. We recommend using the 40Hz at -10dB Gain Overlap track to set the gain for your subwoofer amplifier.
@newbug55215 күн бұрын
I ask myself if my SCHUBERTH SC1M Headset works with this Radio (Navigation, Music, Telephone...) , even if I do NOT have a Harley WHIM installed 🤔
@rockfordfosgate4 күн бұрын
We only specify headset compatibility when the Harley-Davidson WHIM is installed.
@SlimWhittman15 күн бұрын
Huge improvement in sound quality and volume. One of the easiest installs I've ever done. I am very impressed with the way HD has made these 24's so easy to DIY stuff like this. Very much appreciated.
@rockfordfosgate15 күн бұрын
Great feedback! Thanks for sharing your experience with others 👍
@TableTopBiker16 күн бұрын
Does that big wire harness work for the newer harley stereos? Or do I need to use the left side/right side plugs?
@rockfordfosgate16 күн бұрын
Yes, the T-Harness works for the GT, GT 6.5, and GTS radios.
@TableTopBiker16 күн бұрын
@@rockfordfosgate thanks for the super fast response!
@richardstevens311417 күн бұрын
I have a 2023 road glide cvo. Do you sell a stage 3 upgrade for the front speakers?
@rockfordfosgate16 күн бұрын
Great model CVO! Yes, Harley-Davidson just released "kit" versions of our speakers that include speakers and grilles. You can see the Stage I and Stage II options in the "FITMENT area of our OEM AUDIO page: rockfordfosgate.com/products/system/factory-installed-systems/2024-h-d-road-glide-street-glide/
@RobertHendrickson-e2u17 күн бұрын
Just installed this set up in my 2010 Ultra, What does the blue power remote wire plug into?
@rockfordfosgate16 күн бұрын
Typically the Blue wire is used to turn-on the amplifier when you use the RCA line-outs from the radio. However on your model, the amplifier automatically turns-on when sensing the "DC Offset" since you're using the speaker line outputs.
@tyross8919 күн бұрын
Does anyone know if you can wire towers speakers straight to the stereo?
@rockfordfosgate17 күн бұрын
Yes, the Moto-Cans (available through Polaris) can be added to all systems that are NOT Stage-5 High Output.
@saschacubexyz19 күн бұрын
💪😎👍🆙️ Looks like a nice party🫡🍻🙋♂️ Yeeeeeeah
@ThumperFAB19 күн бұрын
Ahhhhh yeah!
@adriandobson553720 күн бұрын
How much higher is the roof then the factory roof?
@rockfordfosgate20 күн бұрын
I don’t have exact numbers but it’s negligible. It’s designed to be a replacement roof.
@adriandobson553720 күн бұрын
What if you have ride command?
@rockfordfosgate20 күн бұрын
This operates independently of Ride Command since it has its own PMX source unit.
@director2bob20 күн бұрын
I was stoked when I saw that Fosgate makes an stereo for the Low Rider ST. My last bike 15 years ago was a Street Glide with a custom sound system. My question is after changing pipes and a wearing a full face helmet, can you still hear the music? And is this the only option for the ST or do you make a more powerful system for this bike? Also do you make speakers that can be added to the saddle bags that would interface with the fairing speakers or are front speakers my only option? I am a musician so I love cruising with loud music but not into wearing earbuds as I like to hear what's going on around me. Thanks for making a great product🤘
@rockfordfosgate20 күн бұрын
It’s a high performance 250W amplifier and it gets LOUD! We can’t comment on aftermarket exhaust because that’s very subjective based on the noise level. This isn’t a “soundbar”, but rather a high performance audio system that will be sure to wake up the neighbors.
@director2bob20 күн бұрын
@@rockfordfosgate thank you for quick response. I am sold on your system but have to ask if you offer a stage 2 sound upgrade?
@rockfordfosgate19 күн бұрын
@@director2bob At this time, we only offer the 1 upgrade. I would suggest checking your local HD dealership to see if they have one on the floor you can listen to. Be certain you sit on the bike because it’s a completely different experience with the windshield … it creates sort of an acoustical “bubble” around your head.
@director2bob19 күн бұрын
@@rockfordfosgate Thanks for the quick response. Your company is phenomenal.!!
@chrismears185421 күн бұрын
Wish this kit was more affordable
@rockfordfosgate20 күн бұрын
Thanks for taking a look at our High Performance audio system!
@BrentLeavittatLowNotesGarage22 күн бұрын
I used this video on the PMX-8DH...these instructions worked flawlessly first try. Really helpful!
@rockfordfosgate20 күн бұрын
Great! Thanks for the feedback! Keoni and Eric will love hearing this!
@clintogle53826 күн бұрын
I’ve got an 07 ultra classic. Radio says 20amp. I have all 15amp. Which ones do I need to change? All three or just the radio power?
@rockfordfosgate24 күн бұрын
Hi @clintogle538 , you shouldn't need to replace any fuses in the electrical system. This radio is designed to work with the existing factory electrical system and fusing. If you're using aftermarket amplifiers, they are most likely have dedicated B+ and GND wires connecting directly to the battery with their own fusing.
@jaimematos234626 күн бұрын
in portugal someone does this work
@rockfordfosgate24 күн бұрын
Hi @jaimematos2346 , Our distributor suggested this dealer that is in your territory: Worldwidesounds, Braga Mr. Jorge Garcia [email protected] fon: +351-965228688.
@Jeff-fk6qy28 күн бұрын
Do you have it available for a 2017 indian roadmaster?
@rockfordfosgate27 күн бұрын
This kit is for a Polaris RZR. However, our motorcycle audio kits that we develop are only available for H-D at this time.
@vmotobiker28 күн бұрын
What about the speakers don't they get replaced?
@rockfordfosgate28 күн бұрын
Yes, with the 500W amplifier update, we suggest upgrading to Stage I or Stage II speakers. There are so many scenarios possible, we created separate amp & speaker installation videos. You can find the Road Glide Speaker upgrade video here: kzread.info/dash/bejne/lJeVp7x7ecavj9I.html You can also find the saddlebag speaker upgrade to Stage III here: kzread.info/dash/bejne/mqF7rpqKnK3Uqdo.html
@brentboyte29 күн бұрын
Compatible with a 2024 Polaris Ranger 1000?
@rockfordfosgate28 күн бұрын
Yes, you can confirm this on the RNGR18-STG1 by clicking on the COMPATIBILITY tab: rockfordfosgate.com/products/details/rngr18-stg1/
@VTG6329 күн бұрын
Thanks for the video, just installed the 500 watt amp and stage II speakers on my 24 RG on 06/01, I keep hearing people talk about updating the amp, so since this is truly a plug and play system, do I need to perform a software update to the amp, and if so, how?
@rockfordfosgate29 күн бұрын
Great! Glad the tutorial helped! There was a firmware update released several months ago that included a tuning update. Your dealer can do this update next time your motorcycle is in for servicing, so it won’t hurt anything to run it with the current firmware. -Eric
@VTG6326 күн бұрын
@@rockfordfosgate Thks
@JordanSykes-wd1vvАй бұрын
Shouldn’t the sub woofer be set at 2ohm for a 4ohm load at the amplifier ?
@rockfordfosgateАй бұрын
The M5-800X4 is designed to operate at 2Ω stereo and/or 4Ω bridged/mono. At timecode 4:42 "Subwoofer Assembly Process", Greg describes the subwoofer/enclosure system where he sets the impedance switch to 4Ω. This wires the Dual 2Ω voice coils in series to create a 4Ω load. The subwoofer rear channels are wired in bridged/mono mode to this 4Ω load. Each channel operating in a bridged/mono configuration will "see" half the impedance load, so essentially the Left channel will see 2Ω and the Right channel will see 2Ω: kzread.info/dash/bejne/lqKEw5eHd5itoLg.html
@serhiihdstratichuk6968Ай бұрын
Hey guys ! What if will use this speakers without Amp? Only with stock radio of my 2018 Street Glide special?
@rockfordfosgateАй бұрын
Technically it's possible, but realistically you really won't hear them while riding. This kit is designed to interface with an existing Rockford Fosgate Stage kit like the HD14-STG2: rockfordfosgate.com/products/details/hd14-stg2/
@mr.sunshine8124Ай бұрын
You should have showed how to access the 2 rear stereo mount bolts because it's a real pain in the ass!!!!
@rockfordfosgateАй бұрын
Yes, they are a bit painful. At timecode 1:59 we do specify using a "long reach 3/16" Allen wrench" and at timecode 2:04 we show a closeup of the rear bolt removal. Having a ball-head Allen always makes these easier, but we were able to reach it without one.
@allmotorhashАй бұрын
Does this work on Rzr Pro r stage 6 system as well?
@rockfordfosgateАй бұрын
The amplifier for the RZR19PXP-STG6 is already pre-tuned using the PRESET switch. Be sure to keep the switch in the ON position to use our pre-configured CLEAN setup.
@allmotorhashАй бұрын
@@rockfordfosgate after spending hours tuning i still go back to preset 😈 mode
@rockfordfosgateАй бұрын
@@allmotorhash We recommend our PRESET because not only do we have hours of tuning development, but also hours of analyzing customer abuse to find the right settings. The result provides performance that fanatics expect from Rockford Fosgate without breaking speakers.
@allmotorhashАй бұрын
@@rockfordfosgate the preset mode is something not achievable by manual tunning care to elaborate onboard dsp designs?
@rockfordfosgateАй бұрын
@@allmotorhash The PRESET switch sets these configurations on the M5-1500X5: - Front /Rear Level - 1 O’Clock - Sub Level - 3 O’Clock - Front/Rear/Sub Punch EQ - MIN - Front/Rear/Sub Crossover - 80Hz - Front/Rear X-over Switch - HP These switches must be set manually: - Sub Input - ON* - Input Switch - 2CH*
@MrTripp137Ай бұрын
What’s the tool he uses to get the screw in for the handle?
@rockfordfosgateАй бұрын
I used a 1/4" ratchet wrench: www.lowes.com/pd/CRAFTSMAN-1-4-in-12-point-Standard-SAE-Ratchet-Wrench/1000594319
@brianklosterman2664Ай бұрын
2024 Polaris General sport will this work and if so what would I need to make everything work on it ? And the speakers I have a 2020 Polaris Ranger 1000 XP with the ride command could I use the speakers from Rockford Fosgate and swap out the factory ones for the Rockford Fosgate ones ?
@rockfordfosgateАй бұрын
The RNGR18-STG2 will not work in the General. For the 2020 Ranger XP 1000 + Ride Command you can't simply swap out the speakers with the factory ones. The smallest kit we offer for Ride Command is the RNGR18RC-STG5: rockfordfosgate.com/products/details/rngr18rc-stg5/
@khoop009Ай бұрын
6k seems insane. Really like this kit, just cant justify that kind of money on what im assuming is really worth around 3k.
@rockfordfosgateАй бұрын
A high performance audio system isn't for everyone, and that's O.K. If you priced everything separately in this kit, it would be well over $6k. Most of the Jeep systems you see online only include a portion of this system because they don't feature dedicated full-range and subwoofer amplifiers nor a Maestro integrated Digital Signal Processor so it connects to the factory CANbus system without any cutting any wiring. If you want to upgrade your Jeep with a performance system, our technical support is always happy to help create a home-brew version using select Rockford Fosgate components. They can be reached at 1-800-669-9899 Mon.-Fri. 8am-5pm MST.
@khoop009Ай бұрын
@@rockfordfosgate these damn jeeps are money pits. I have a rubicon diesel jt and it already has an oem subwoofer. Would that need to be removed with this kit?
@rockfordfosgateАй бұрын
@@khoop009 I know, right? Better wheels, some suspension upgrades, audio, etc. Yes, the factory Alpine subwoofer gets removed, something that can be sold on eBay or a market place.
@Jayty676Ай бұрын
Bought my first rockford fosgate products few months ago, 2x 15p3 with the prime 1200.1 this set up hits hard. Thinking of upgrading the woofers, any advice on which t1 or t2? Still keeping the amp.
@rockfordfosgateАй бұрын
The P3 subwoofer is our most popular in the line, so that's a really good setup you have there. If you upgrade the subwoofers you would need to go from a 600W (P3) to an 800-1200W (T1) and double your amplifier power (add a secondary R2-1200X1) for it to be noticeable. Otherwise, simply switching subwoofers wouldn't gain you much difference.
@Jayty676Ай бұрын
@@rockfordfosgate yeah I'll double the amp but the birth certificate for my amp say it's 1425watts at 1ohm.
@rockfordfosgateАй бұрын
@@Jayty676 Yes, you have a pretty powerful amplifier and subwoofer setup. Simply switching from P3 to T1 subwoofers isn't really going to change much, so there are many factors to consider. Check out the "Speaker Power Handling" video I made with some good info that may help: kzread.info/dash/bejne/p5V7zsRyg9zTlKw.html
@CraigC.78Ай бұрын
What brand jack are you using under the bikes?
@rockfordfosgateАй бұрын
Here's the Jack Stand we used: www.amazon.com/gp/product/B0C22MRP57/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
@armandotorres7260Ай бұрын
I have a stage 5 on my Rzr . Want more volume , debating if I should go 8 or 10s ¿ are the 10s that much louder ? And what amp do yall recommend?
@rockfordfosgateАй бұрын
Sensitivity (dB @ 2.83V) is 96 dB on the M2-8H and 97 dB on the M2-10H, so it's louder but negligible. We would suggest making sure the 10" fit because they are large. You can find dimensions in the manual here: rockfordfosgate.zendesk.com/hc/en-us/articles/23190975153051-2021-2022-M2-Marine-Wake-Tower-Speakers-owner-s-manual
@monroyu9519Ай бұрын
Dose this come with instructions because I don’t know nothing about electrical wiring I can mount and install everything up but not good at wiring stuff, do you think I got it or should I hire someone?
@rockfordfosgateАй бұрын
The video above are the step-by-step instructions. Everything is plug-and-play, but if you prefer, we have Authorized Dealers listed on our Dealer Locator at www.rockfordfosgate.com/dealerlocator/
@monroyu9519Ай бұрын
Dose a bass knob come included or do I have to buy one?
@rockfordfosgateАй бұрын
The sub level is built into the PMX radio, so there is no "bass knob" available for this kit. We have pre-tuned the kit for the best overall performance and the sub level and built-in EQ can be fine tuned to your taste in music. However, keep in mind, this is an "open air" vehicle that has a different type of bass response compared to a "closed environment" like a car, truck, or SUV.
@brandonmartin506Ай бұрын
I have a problem with this amp not having any sound randomly and I have to pull the main fuse and it will work for 3 are 4 days then does the same thing any suggestions?
@rockfordfosgateАй бұрын
I'm sorry you're having this issue. Are you referring to the factory equipped silver amplifier or this upgraded black amp as shown in this video? If it's the silver amplifier, there are updates for SKYLINE OS that should fix this. If it's the black amplifier, there is an additional EQ update (unrelated to the amp turning off randomly). You can have your H-D dealership do them for you since you likely just purchased your motorcycle.
@brandonmartin506Ай бұрын
@@rockfordfosgate it’s the black 500 watt amp like in the video
@rockfordfosgateАй бұрын
@@brandonmartin506 We would suggest having the H-D Dealership doing a SKYLINE OS update to fix this issue.
@D.A.G808Ай бұрын
Can you still hear over the loud exhaust?
@rockfordfosgateАй бұрын
Yes, absolutely! It features a high powered 250 Watt amplifier that screams. You can see reviews on the H-D website: www.harley-davidson.com/us/en/shop/harley-davidson-audio-powered-by-rockford-fosgate-inner-fairing-audio-kit/p/76200037
@St.scottoАй бұрын
Corny asf
@wesleyfowler8363Ай бұрын
Had this unit installed recently on my 14 SGS by Area 51 customs out of Dothan Alabama. What I was not told was how to view engine parameters. How can I see my oil pressure using the radio? Factory setup was just pressing the right side turn signal/information button I press it now and that’s no longer that buttons function
@rockfordfosgateАй бұрын
Those functions are currently being worked on and we plan to have them out in the coming months (to access the motorcycle information, you will press the "i" icon). We have a Quick Start Guide that will walk you through the most popular functions here: kzread.info/dash/bejne/mYlnm8mamrK7ecY.html
Пікірлер
Could u leave the oem grills and just change ouf the speaker? Id like to leave mine as they have harley logo on then
@@andrewward4486 Yes, you can absolutely leave the HD grilles on and just swap out the speaker if you like.
Does the infinite baffle 12 inch m2 have a significant advantage over the 10 inch? Most of the specs are similar.
@@curt1star05 The 12” plays lower and will move more air (louder) based on these 2 specs: 10” Fs = 43 Hz / Sd = 363 cm2 12” Fs = 38 Hz / Sd = 539 cm2
Since the purchase of this Rockford Fosgate primary Amplifier. I have to pull the nain fuse from time to time to get sound as it inadvertently stops producing sound. Harley Davidson answer to my problem take it to the dealer who is now charging me normal diagnostic rates. Brand new 2024 Roadglide and Amplifier purchased from Harley dealership. I dont foresee the Harley Davidson brand being around much longer producing this type of product. Beyond disappointed to say the least.
Sorry your having intermittent issues. We understand from Harley-Davidson this inadvertent no output from the audio system is caused by Skyline OS, not the amplifier. We would advise the dealership to update the IFCU under warranty and not charge a "diagnostic" rate, because there's nothing to diagnose with the amplifier. Ironically, there is an amplifier update but that is an update to the built-in Dynamic EQ (M-DEQ) settings based on rider's feedback. However, if the shop updates the IFCU, it's just as easy to do the amplifier update as well. You can find out more info on M-DEQ and how it works inside the amplifier here: rockfordfosgate.com/products/system/factory-installed-systems/2024-h-d-road-glide-street-glide/#tech2
@@rockfordfosgate - My 2024 is currently at Huntington Beach Harley in So.California. It's a high possibility that I'm going to be charged for the diagnostic per the service writer. Also per the Rockford Fosgate primary Amplifier instructions that came with the aforementioned Amplifier it didn't make mention of updates,flash being required. It was sold to me through the Harley dealer as plug and play of which it seemly was for the sake of conversation. Nevertheless the dealer is now stating while you installed it yourself. I'm like well why would I not if it's plug and play and it doesn't void the warranty if I do it myself. Blah,blah.
@@dippa1965 appreciate the information, and you’re right…this amp is plug-and-play and was developed with Harley-Davidson, so it should not void any warranty. To the best of our knowledge, our technicians started hearing about this with factory systems (untouched with any upgrades) and it appears to be an issue inside Skyline OS. I’m hoping there are service advisories on it by now. Once Skyline is updated, it’s fixed the audio routing issue for every customer we have talked to.
@@rockfordfosgate I greatly appreciate your input as you've been of more help then Harley Davidson customer care for sure. I apologize in venting my frustration within this forum however I am beyond disappointed after having purchased a new motorcycle encountering such issues. Here it's the 4th of July weekend and my month old bike is in the shop.
@@rockfordfosgate - Update on my situation having picked my 2024 Roadglide up from the dealer this afternoon 7/6/24. Per a verbal conversation with the service writer issue as been resolved. I've to to receive my email copy of the repair order,nevertheless again per our verbal my Roadglides has been updated. Furthermore,I wasn't charged the diagnostic fee of approximately $300.00 dollars I quoted originally. The service writer again communicated that upon receiving the bikes from Harley that they Update the software. So I'll follow-up within a couple days to report if this actually resolved the issue. Thank you for the information concerning my issue I'm most grateful for your input,sir.
Is that deamau5 music in the background?
Yes, this is before we had to convert to Royalty Free music!
It goes connected to the bus bar or straight to the battery?
At 13:10 you can see Greg wire the B+ and GND directly to the battery.
Is the amp suppose to fit tight. Mine seems to be hitting the steering wheel motor.
It’s very close to the motor, but since the bracket wraps around the tubular frame, you should have some play to get everything roughed in before tightening the bolts.
Just put these in my boat
Awesome! Hope they work well for your application!
Is it give echo output ?? Pls comment back rockford
We're not sure by what is meant by "echo output". The DSR1 does not have any such feature.
What’s gonna happen to the cigarette outlet plug when installing the PMX-3?
It will still be there, but blocked-off. You can use an extension and route it to another location.
Hi, how change the language in german? I have change region in europe. but i cant change the language.
Watch this video on changing the language to the available languages setup in the PMX-HD14: kzread.info/dash/bejne/mYlnm8mamrK7ecY.html
@@rockfordfosgate Maybe I expressed myself wrongly. I can choose a region, but I can't select a language. It stays in English and I can't select anything else. If I press language, nothing happens.
@@Frank-es2il so when you press the FINISH button, nothing happens? Are you saying the menu remains in English? Can you operate the radio or the menu freezes?
@@rockfordfosgate I cannot choose another language. The language selection is English and grayed out. All I can do is select the region and press finish. The radio works normally, except that the entire menu navigation is in English. The radio is only two weeks old.
So Rockford is not coming out with a cut kit for the 24 non cvo? Basically saying have to go to Harley purchase cvo style lids that is paint match to your bike to do this setup.
Currently, there is no aftermarket cut-in kit available.
Wait so, the Power amps won't have as good sound quality as the punch amps?
The Power Series amplifiers offer the best we have to offer based on sound quality and performance.
@@rockfordfosgate thank you so much for answering!
I thought it’s plug and play. Why do I need to lift the tank?
We run the large B+ and GND cables under the gas tank. On Rushmore models it’s easy to remove when it’s low on gas.
@@rockfordfosgate Thank you
I want to tune. Amp for one 10 but I’m running door speakers off headunit so no 4 channel just 500x1 at 2ohm don’t want harm door speakers when tuning
As long as the amplifier power output does not exceed the subwoofer's RMS power handling you should be fine. We recommend using the 40Hz at -10dB Gain Overlap track to set the gain for your subwoofer amplifier.
I ask myself if my SCHUBERTH SC1M Headset works with this Radio (Navigation, Music, Telephone...) , even if I do NOT have a Harley WHIM installed 🤔
We only specify headset compatibility when the Harley-Davidson WHIM is installed.
Huge improvement in sound quality and volume. One of the easiest installs I've ever done. I am very impressed with the way HD has made these 24's so easy to DIY stuff like this. Very much appreciated.
Great feedback! Thanks for sharing your experience with others 👍
Does that big wire harness work for the newer harley stereos? Or do I need to use the left side/right side plugs?
Yes, the T-Harness works for the GT, GT 6.5, and GTS radios.
@@rockfordfosgate thanks for the super fast response!
I have a 2023 road glide cvo. Do you sell a stage 3 upgrade for the front speakers?
Great model CVO! Yes, Harley-Davidson just released "kit" versions of our speakers that include speakers and grilles. You can see the Stage I and Stage II options in the "FITMENT area of our OEM AUDIO page: rockfordfosgate.com/products/system/factory-installed-systems/2024-h-d-road-glide-street-glide/
Just installed this set up in my 2010 Ultra, What does the blue power remote wire plug into?
Typically the Blue wire is used to turn-on the amplifier when you use the RCA line-outs from the radio. However on your model, the amplifier automatically turns-on when sensing the "DC Offset" since you're using the speaker line outputs.
Does anyone know if you can wire towers speakers straight to the stereo?
Yes, the Moto-Cans (available through Polaris) can be added to all systems that are NOT Stage-5 High Output.
💪😎👍🆙️ Looks like a nice party🫡🍻🙋♂️ Yeeeeeeah
Ahhhhh yeah!
How much higher is the roof then the factory roof?
I don’t have exact numbers but it’s negligible. It’s designed to be a replacement roof.
What if you have ride command?
This operates independently of Ride Command since it has its own PMX source unit.
I was stoked when I saw that Fosgate makes an stereo for the Low Rider ST. My last bike 15 years ago was a Street Glide with a custom sound system. My question is after changing pipes and a wearing a full face helmet, can you still hear the music? And is this the only option for the ST or do you make a more powerful system for this bike? Also do you make speakers that can be added to the saddle bags that would interface with the fairing speakers or are front speakers my only option? I am a musician so I love cruising with loud music but not into wearing earbuds as I like to hear what's going on around me. Thanks for making a great product🤘
It’s a high performance 250W amplifier and it gets LOUD! We can’t comment on aftermarket exhaust because that’s very subjective based on the noise level. This isn’t a “soundbar”, but rather a high performance audio system that will be sure to wake up the neighbors.
@@rockfordfosgate thank you for quick response. I am sold on your system but have to ask if you offer a stage 2 sound upgrade?
@@director2bob At this time, we only offer the 1 upgrade. I would suggest checking your local HD dealership to see if they have one on the floor you can listen to. Be certain you sit on the bike because it’s a completely different experience with the windshield … it creates sort of an acoustical “bubble” around your head.
@@rockfordfosgate Thanks for the quick response. Your company is phenomenal.!!
Wish this kit was more affordable
Thanks for taking a look at our High Performance audio system!
I used this video on the PMX-8DH...these instructions worked flawlessly first try. Really helpful!
Great! Thanks for the feedback! Keoni and Eric will love hearing this!
I’ve got an 07 ultra classic. Radio says 20amp. I have all 15amp. Which ones do I need to change? All three or just the radio power?
Hi @clintogle538 , you shouldn't need to replace any fuses in the electrical system. This radio is designed to work with the existing factory electrical system and fusing. If you're using aftermarket amplifiers, they are most likely have dedicated B+ and GND wires connecting directly to the battery with their own fusing.
in portugal someone does this work
Hi @jaimematos2346 , Our distributor suggested this dealer that is in your territory: Worldwidesounds, Braga Mr. Jorge Garcia [email protected] fon: +351-965228688.
Do you have it available for a 2017 indian roadmaster?
This kit is for a Polaris RZR. However, our motorcycle audio kits that we develop are only available for H-D at this time.
What about the speakers don't they get replaced?
Yes, with the 500W amplifier update, we suggest upgrading to Stage I or Stage II speakers. There are so many scenarios possible, we created separate amp & speaker installation videos. You can find the Road Glide Speaker upgrade video here: kzread.info/dash/bejne/lJeVp7x7ecavj9I.html You can also find the saddlebag speaker upgrade to Stage III here: kzread.info/dash/bejne/mqF7rpqKnK3Uqdo.html
Compatible with a 2024 Polaris Ranger 1000?
Yes, you can confirm this on the RNGR18-STG1 by clicking on the COMPATIBILITY tab: rockfordfosgate.com/products/details/rngr18-stg1/
Thanks for the video, just installed the 500 watt amp and stage II speakers on my 24 RG on 06/01, I keep hearing people talk about updating the amp, so since this is truly a plug and play system, do I need to perform a software update to the amp, and if so, how?
Great! Glad the tutorial helped! There was a firmware update released several months ago that included a tuning update. Your dealer can do this update next time your motorcycle is in for servicing, so it won’t hurt anything to run it with the current firmware. -Eric
@@rockfordfosgate Thks
Shouldn’t the sub woofer be set at 2ohm for a 4ohm load at the amplifier ?
The M5-800X4 is designed to operate at 2Ω stereo and/or 4Ω bridged/mono. At timecode 4:42 "Subwoofer Assembly Process", Greg describes the subwoofer/enclosure system where he sets the impedance switch to 4Ω. This wires the Dual 2Ω voice coils in series to create a 4Ω load. The subwoofer rear channels are wired in bridged/mono mode to this 4Ω load. Each channel operating in a bridged/mono configuration will "see" half the impedance load, so essentially the Left channel will see 2Ω and the Right channel will see 2Ω: kzread.info/dash/bejne/lqKEw5eHd5itoLg.html
Hey guys ! What if will use this speakers without Amp? Only with stock radio of my 2018 Street Glide special?
Technically it's possible, but realistically you really won't hear them while riding. This kit is designed to interface with an existing Rockford Fosgate Stage kit like the HD14-STG2: rockfordfosgate.com/products/details/hd14-stg2/
You should have showed how to access the 2 rear stereo mount bolts because it's a real pain in the ass!!!!
Yes, they are a bit painful. At timecode 1:59 we do specify using a "long reach 3/16" Allen wrench" and at timecode 2:04 we show a closeup of the rear bolt removal. Having a ball-head Allen always makes these easier, but we were able to reach it without one.
Does this work on Rzr Pro r stage 6 system as well?
The amplifier for the RZR19PXP-STG6 is already pre-tuned using the PRESET switch. Be sure to keep the switch in the ON position to use our pre-configured CLEAN setup.
@@rockfordfosgate after spending hours tuning i still go back to preset 😈 mode
@@allmotorhash We recommend our PRESET because not only do we have hours of tuning development, but also hours of analyzing customer abuse to find the right settings. The result provides performance that fanatics expect from Rockford Fosgate without breaking speakers.
@@rockfordfosgate the preset mode is something not achievable by manual tunning care to elaborate onboard dsp designs?
@@allmotorhash The PRESET switch sets these configurations on the M5-1500X5: - Front /Rear Level - 1 O’Clock - Sub Level - 3 O’Clock - Front/Rear/Sub Punch EQ - MIN - Front/Rear/Sub Crossover - 80Hz - Front/Rear X-over Switch - HP These switches must be set manually: - Sub Input - ON* - Input Switch - 2CH*
What’s the tool he uses to get the screw in for the handle?
I used a 1/4" ratchet wrench: www.lowes.com/pd/CRAFTSMAN-1-4-in-12-point-Standard-SAE-Ratchet-Wrench/1000594319
2024 Polaris General sport will this work and if so what would I need to make everything work on it ? And the speakers I have a 2020 Polaris Ranger 1000 XP with the ride command could I use the speakers from Rockford Fosgate and swap out the factory ones for the Rockford Fosgate ones ?
The RNGR18-STG2 will not work in the General. For the 2020 Ranger XP 1000 + Ride Command you can't simply swap out the speakers with the factory ones. The smallest kit we offer for Ride Command is the RNGR18RC-STG5: rockfordfosgate.com/products/details/rngr18rc-stg5/
6k seems insane. Really like this kit, just cant justify that kind of money on what im assuming is really worth around 3k.
A high performance audio system isn't for everyone, and that's O.K. If you priced everything separately in this kit, it would be well over $6k. Most of the Jeep systems you see online only include a portion of this system because they don't feature dedicated full-range and subwoofer amplifiers nor a Maestro integrated Digital Signal Processor so it connects to the factory CANbus system without any cutting any wiring. If you want to upgrade your Jeep with a performance system, our technical support is always happy to help create a home-brew version using select Rockford Fosgate components. They can be reached at 1-800-669-9899 Mon.-Fri. 8am-5pm MST.
@@rockfordfosgate these damn jeeps are money pits. I have a rubicon diesel jt and it already has an oem subwoofer. Would that need to be removed with this kit?
@@khoop009 I know, right? Better wheels, some suspension upgrades, audio, etc. Yes, the factory Alpine subwoofer gets removed, something that can be sold on eBay or a market place.
Bought my first rockford fosgate products few months ago, 2x 15p3 with the prime 1200.1 this set up hits hard. Thinking of upgrading the woofers, any advice on which t1 or t2? Still keeping the amp.
The P3 subwoofer is our most popular in the line, so that's a really good setup you have there. If you upgrade the subwoofers you would need to go from a 600W (P3) to an 800-1200W (T1) and double your amplifier power (add a secondary R2-1200X1) for it to be noticeable. Otherwise, simply switching subwoofers wouldn't gain you much difference.
@@rockfordfosgate yeah I'll double the amp but the birth certificate for my amp say it's 1425watts at 1ohm.
@@Jayty676 Yes, you have a pretty powerful amplifier and subwoofer setup. Simply switching from P3 to T1 subwoofers isn't really going to change much, so there are many factors to consider. Check out the "Speaker Power Handling" video I made with some good info that may help: kzread.info/dash/bejne/p5V7zsRyg9zTlKw.html
What brand jack are you using under the bikes?
Here's the Jack Stand we used: www.amazon.com/gp/product/B0C22MRP57/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
I have a stage 5 on my Rzr . Want more volume , debating if I should go 8 or 10s ¿ are the 10s that much louder ? And what amp do yall recommend?
Sensitivity (dB @ 2.83V) is 96 dB on the M2-8H and 97 dB on the M2-10H, so it's louder but negligible. We would suggest making sure the 10" fit because they are large. You can find dimensions in the manual here: rockfordfosgate.zendesk.com/hc/en-us/articles/23190975153051-2021-2022-M2-Marine-Wake-Tower-Speakers-owner-s-manual
Dose this come with instructions because I don’t know nothing about electrical wiring I can mount and install everything up but not good at wiring stuff, do you think I got it or should I hire someone?
The video above are the step-by-step instructions. Everything is plug-and-play, but if you prefer, we have Authorized Dealers listed on our Dealer Locator at www.rockfordfosgate.com/dealerlocator/
Dose a bass knob come included or do I have to buy one?
The sub level is built into the PMX radio, so there is no "bass knob" available for this kit. We have pre-tuned the kit for the best overall performance and the sub level and built-in EQ can be fine tuned to your taste in music. However, keep in mind, this is an "open air" vehicle that has a different type of bass response compared to a "closed environment" like a car, truck, or SUV.
I have a problem with this amp not having any sound randomly and I have to pull the main fuse and it will work for 3 are 4 days then does the same thing any suggestions?
I'm sorry you're having this issue. Are you referring to the factory equipped silver amplifier or this upgraded black amp as shown in this video? If it's the silver amplifier, there are updates for SKYLINE OS that should fix this. If it's the black amplifier, there is an additional EQ update (unrelated to the amp turning off randomly). You can have your H-D dealership do them for you since you likely just purchased your motorcycle.
@@rockfordfosgate it’s the black 500 watt amp like in the video
@@brandonmartin506 We would suggest having the H-D Dealership doing a SKYLINE OS update to fix this issue.
Can you still hear over the loud exhaust?
Yes, absolutely! It features a high powered 250 Watt amplifier that screams. You can see reviews on the H-D website: www.harley-davidson.com/us/en/shop/harley-davidson-audio-powered-by-rockford-fosgate-inner-fairing-audio-kit/p/76200037
Corny asf
Had this unit installed recently on my 14 SGS by Area 51 customs out of Dothan Alabama. What I was not told was how to view engine parameters. How can I see my oil pressure using the radio? Factory setup was just pressing the right side turn signal/information button I press it now and that’s no longer that buttons function
Those functions are currently being worked on and we plan to have them out in the coming months (to access the motorcycle information, you will press the "i" icon). We have a Quick Start Guide that will walk you through the most popular functions here: kzread.info/dash/bejne/mYlnm8mamrK7ecY.html