Good video. I just wanted to see how to do the intake gasket which should always be changed on these cars if its unknown. I might as well do knock sensor too since its easy to access once intake is off. Good video.
@ALASAT12 күн бұрын
Best review of any product just short of "Project Farm" I believe I've ever seen. Camera work, narration and everything just Primo. I have a background in broadcast television so I would call this an authoritative opinion. I have been thinking about buying one of these for a while and I'm still kind of on the fence. Thanks for your video, very helpful.
@sherrischneider27942 күн бұрын
It's not the impact wrench but the heft of the socket. Your old impact wrench would probably have worked.
@jonathanguest16283 күн бұрын
Ill be getting one for sure
@charlesmccarthy20644 күн бұрын
Snow plow
@drwatson12344 күн бұрын
Very helpful
@kenjimorimitsu17574 күн бұрын
you just take the whole take you don't need to transfer. They will drain it for you and give you back your oil tank. Oriley does it all the time
@user-ei9cz2uj8b5 күн бұрын
How have you made out with your three wishes? Were you able to install some kind of a grass flap Chute blocker and be able to put on a grass catcher while keeping your mulch system intact? If so please share!!
@AaronRussell-yj9bm5 күн бұрын
What if it doesn’t start when you do that
@jnieveslocobanana5 күн бұрын
Ok very smart , I fought myself getting this blade to the point that I had it at the register and scanned, and I returned it... What . So I have wanted a D2 blade for the longest time but out of my budget point for so long, so when I saw this at their SEMA showing I have been going to HF and asking do you have it yet. My point this weekend there is a Icon deal buy however many icon hand tools get a percentage off, and. For I TC members spend 40 you get a free tool. Well I made that super purchase included was the icon knife. With the lifetime warranty 🎉
@danieldelgado81535 күн бұрын
I also bought one and I’m extremely happy with it so far …My best from Albuquerque..
@colincoombes58835 күн бұрын
If you think the 900 dewalt impact wrench is good then you will love the 961 it's the flagship of dewalt and is a lot more powerful than the 900.
@haydenbrown34146 күн бұрын
Adding the roll cage will stiffen the cab and frame if done correctly so your doors wouldn’t matter after that
@jonas.de.oliveira7 күн бұрын
why does it not connect to my phone when i plug it in?
@iviaqua8 күн бұрын
Thanks. We replaced ours today. God bless you.
@PurityofWrath8 күн бұрын
Thanks
@MrJimvilandre10 күн бұрын
I would ask for a 50 percent deposit up front then the remaining 50 percent upon completion. That way you can have the customers have in the game
@HerbyOutlaw10 күн бұрын
I started my truck every day for a week by doing this. 😆
@vikigab927813 күн бұрын
Honestly what a legend! Me and my partner had this issue with our car. My fiance is good with cars but he couldn't fix it as he had tried this morning, after watching your video I saw him how you did it and after 3 minutes we fixed ours !!! THANK YOU!!!!
@seddy222213 күн бұрын
They do make a Bosch hammer drill that has more balls it's $250 to $300. The hammer hits harder. I'm a mason I have both.
@The-Homecook-000014 күн бұрын
Get a knife in the dollar store and carrier that...
@chrisfenton779014 күн бұрын
I just replaced my front driver side on my 05 crv. Those 3 bearings were lose on the transmission side. My crv was thudding.when I stepped on the gas. Just rolling no shudder vibrations.
@kjjerome16 күн бұрын
Pretty old post not sure if this will get eyes on it but how would this do to get up imbedded rock in landscape garden? Thx
@cindistanton523616 күн бұрын
Is this self propelled or just pushed …if that makes sense. My Dad want to get a good self propelled one…he’s 87yr old. Yes I do weed whacking for him but I think he just likes to be doing something!!
@jedidiahstrain951516 күн бұрын
Excellent video man I have never owned a Ford before I always had a Chevy and your video helped me out a whole bunch. Thank you
@bird-yd7ge17 күн бұрын
Wasted video
@Anthony_Williams121617 күн бұрын
Great video man!
@JJ-hh5sf18 күн бұрын
I stopped watching once music started playing
@Username-es1iy19 күн бұрын
Oh dam I like those last ones
@brandenfrederick677821 күн бұрын
How has it held up over time?
@sherlock189521 күн бұрын
I have one and I agree completely. Great knife for the money. I highly recommend this knife. Cheers!
@ByDesign33321 күн бұрын
I just found that model, the online ad says, selling for about $71....scam ad maybe??? I have paid the same as you for the Troy brand one...but once it gets used, mine would NOT restart till totally cooled....took $ 64 to have a shop fix here, even though i paid $75 extend w. Shop said it ad to clean the carb(?) Before i used it 2x! But now im using it for a elderly lady with a bedrock showing.
@gtcam72321 күн бұрын
I have a set of the SK but I haven’t looked to see if they were still US made with the weirdness that company has had going on. I try to stick to US or Taiwan made, or generally just not made in China. Sometimes I’m buying for specific features (think Mac RBRT) and my only reasoning has to be “because I want them” lol
@NorthlanderMN21 күн бұрын
Just have a bon fire and burn wood. It’s cheaper.
@sandspar22 күн бұрын
Perfect, thank you.
@michaelcunha615522 күн бұрын
Not a good video. You need to mention which way the open slot of switch v/s the closed hole of the opposite side ...and also the orientation of boister rod ..some have an offset
@gregtucker2323 күн бұрын
Thanks f0r this, I'm having a similar problem. Did you get a check engine light for this?
@SunsyloSouvannaraj-rh6zm23 күн бұрын
Yep I’m about to order this Dewalt impact wrench to loose up the crank bolt on my son 2005 civic so I can change the water pump and timing belt it a pain in the ass ✌🏽
@jmalone275824 күн бұрын
30 ACRES lol. 1,306,800 Sq. foot
@northcarolinagunenthusiast653224 күн бұрын
How did you remove the adhesive that holds in the heater core. I have water getting into my truck. I think it's coming from cracked adhesive that holds in the heater core.
@markbryant464126 күн бұрын
Barbarian/learned scholar. That was great.
@th3r34lE328 күн бұрын
Dude, you are legendary. Thanks so much for the video!
@johnadams527629 күн бұрын
Oh, crap! I've already done about 50(+) stumps with mine, and I haven't added the first drop of new grease. I'm sure I've got over 40 hours of wear on this thing. So far, so good! I did just lose my first two teeth, though... on a buried, steel, fence post.
@jamesbranham221729 күн бұрын
I just ordered a buck 841 just because it is made in u.s. but i might pick one of these up.. i have a camillus knife for about 20years.. it has a lever on the side which flips it open.. and a lock like a buck knife.. i really like this knife but options are nice..
@cbrinsfi29 күн бұрын
Thanks for the review - very helpful!
@dirkmcghee1604Ай бұрын
Good on ya for keeping her, always cheaper! LOL 14 years, pretty damn good lol! Love that you're not a knife snob, my people lol! (says a total snob about everything he's in to!) 😄
@PLTXPDАй бұрын
my 97 f250 has good battery, when i turn the key it clicks and the power goes out until I pull a lead off the battery and put it back on. I think there is a bad connection or a incomplete circuit somwhere. Any suggestions.
@Oh6TorchАй бұрын
They’re $105 now. 😢
@jeffbarnboyАй бұрын
I bought it. Great knife and excellent blade retention.
Пікірлер
Good video. I just wanted to see how to do the intake gasket which should always be changed on these cars if its unknown. I might as well do knock sensor too since its easy to access once intake is off. Good video.
Best review of any product just short of "Project Farm" I believe I've ever seen. Camera work, narration and everything just Primo. I have a background in broadcast television so I would call this an authoritative opinion. I have been thinking about buying one of these for a while and I'm still kind of on the fence. Thanks for your video, very helpful.
It's not the impact wrench but the heft of the socket. Your old impact wrench would probably have worked.
Ill be getting one for sure
Snow plow
Very helpful
you just take the whole take you don't need to transfer. They will drain it for you and give you back your oil tank. Oriley does it all the time
How have you made out with your three wishes? Were you able to install some kind of a grass flap Chute blocker and be able to put on a grass catcher while keeping your mulch system intact? If so please share!!
What if it doesn’t start when you do that
Ok very smart , I fought myself getting this blade to the point that I had it at the register and scanned, and I returned it... What . So I have wanted a D2 blade for the longest time but out of my budget point for so long, so when I saw this at their SEMA showing I have been going to HF and asking do you have it yet. My point this weekend there is a Icon deal buy however many icon hand tools get a percentage off, and. For I TC members spend 40 you get a free tool. Well I made that super purchase included was the icon knife. With the lifetime warranty 🎉
I also bought one and I’m extremely happy with it so far …My best from Albuquerque..
If you think the 900 dewalt impact wrench is good then you will love the 961 it's the flagship of dewalt and is a lot more powerful than the 900.
Adding the roll cage will stiffen the cab and frame if done correctly so your doors wouldn’t matter after that
why does it not connect to my phone when i plug it in?
Thanks. We replaced ours today. God bless you.
Thanks
I would ask for a 50 percent deposit up front then the remaining 50 percent upon completion. That way you can have the customers have in the game
I started my truck every day for a week by doing this. 😆
Honestly what a legend! Me and my partner had this issue with our car. My fiance is good with cars but he couldn't fix it as he had tried this morning, after watching your video I saw him how you did it and after 3 minutes we fixed ours !!! THANK YOU!!!!
They do make a Bosch hammer drill that has more balls it's $250 to $300. The hammer hits harder. I'm a mason I have both.
Get a knife in the dollar store and carrier that...
I just replaced my front driver side on my 05 crv. Those 3 bearings were lose on the transmission side. My crv was thudding.when I stepped on the gas. Just rolling no shudder vibrations.
Pretty old post not sure if this will get eyes on it but how would this do to get up imbedded rock in landscape garden? Thx
Is this self propelled or just pushed …if that makes sense. My Dad want to get a good self propelled one…he’s 87yr old. Yes I do weed whacking for him but I think he just likes to be doing something!!
Excellent video man I have never owned a Ford before I always had a Chevy and your video helped me out a whole bunch. Thank you
Wasted video
Great video man!
I stopped watching once music started playing
Oh dam I like those last ones
How has it held up over time?
I have one and I agree completely. Great knife for the money. I highly recommend this knife. Cheers!
I just found that model, the online ad says, selling for about $71....scam ad maybe??? I have paid the same as you for the Troy brand one...but once it gets used, mine would NOT restart till totally cooled....took $ 64 to have a shop fix here, even though i paid $75 extend w. Shop said it ad to clean the carb(?) Before i used it 2x! But now im using it for a elderly lady with a bedrock showing.
I have a set of the SK but I haven’t looked to see if they were still US made with the weirdness that company has had going on. I try to stick to US or Taiwan made, or generally just not made in China. Sometimes I’m buying for specific features (think Mac RBRT) and my only reasoning has to be “because I want them” lol
Just have a bon fire and burn wood. It’s cheaper.
Perfect, thank you.
Not a good video. You need to mention which way the open slot of switch v/s the closed hole of the opposite side ...and also the orientation of boister rod ..some have an offset
Thanks f0r this, I'm having a similar problem. Did you get a check engine light for this?
Yep I’m about to order this Dewalt impact wrench to loose up the crank bolt on my son 2005 civic so I can change the water pump and timing belt it a pain in the ass ✌🏽
30 ACRES lol. 1,306,800 Sq. foot
How did you remove the adhesive that holds in the heater core. I have water getting into my truck. I think it's coming from cracked adhesive that holds in the heater core.
Barbarian/learned scholar. That was great.
Dude, you are legendary. Thanks so much for the video!
Oh, crap! I've already done about 50(+) stumps with mine, and I haven't added the first drop of new grease. I'm sure I've got over 40 hours of wear on this thing. So far, so good! I did just lose my first two teeth, though... on a buried, steel, fence post.
I just ordered a buck 841 just because it is made in u.s. but i might pick one of these up.. i have a camillus knife for about 20years.. it has a lever on the side which flips it open.. and a lock like a buck knife.. i really like this knife but options are nice..
Thanks for the review - very helpful!
Good on ya for keeping her, always cheaper! LOL 14 years, pretty damn good lol! Love that you're not a knife snob, my people lol! (says a total snob about everything he's in to!) 😄
my 97 f250 has good battery, when i turn the key it clicks and the power goes out until I pull a lead off the battery and put it back on. I think there is a bad connection or a incomplete circuit somwhere. Any suggestions.
They’re $105 now. 😢
I bought it. Great knife and excellent blade retention.
Thanks!!