Timtools99 is all about showing people how to do things. It's about enjoying life and learning in the process. Some videos are strictly "how-to" while others are ingenious and humorous. Tim has the tools and know-how and enjoys life!
I made a circle cutting jig for my bandsaw which took about 15 minutes and it sure saves a lot of sanding.
@gypsybarrett44022 күн бұрын
Im hoping someday i can make something like this for my jewelery workshop... i dont even care if it stays put. Just need a cozy dry space❤❤❤❤
@paulyosef75508 күн бұрын
Great teacher
@tom525611 күн бұрын
That was very interesting it looked like some places I have been it in the US except for the animals don't see too many giraffes in the US.
@SteveHazel12 күн бұрын
very nice. i like the powerful singing.
@douglas_drew13 күн бұрын
Thanks for taking us along.
@MJacksonXenos13 күн бұрын
Have you considered setting your camera to high multitasking shot mode. This takes as many images as your camera is capable of as long as you hold down the shutter release.
@lisamazz735415 күн бұрын
That is so cute! I'm interested in making one (or more lol) myself. Thank you for sharing your video!
@richardmccann481516 күн бұрын
I was not able to give this video a thumbs up, and another video too! Scroo toobe is trying to clear out the smaller creators. Good luck, I'll keep trying!
@LisaBondMCBabyGurl20 күн бұрын
🖤🤗🖤
@LisaBondMCBabyGurl20 күн бұрын
🎉🎉🎉🎉🎉
@nepiahemopo170226 күн бұрын
My mum would make this when we were growing up in NZ.
@RyanKealy28 күн бұрын
I finally understand how to do a proper bird's mouth. Really nicely done video.
@peterbaldridge405329 күн бұрын
I reviewed this again. I think the bolts for the sickle bar deflector go the other way, so that the spring and nuts are on the outside.
@cd116829 күн бұрын
Oh wow. 4 minutes of talk to change a paper filter. Time to go to the nursing home
@bobryan549629 күн бұрын
loved it, no foolish music, calm and straightforward. well done, l just subscribed and liked !
@CommandoX798Ай бұрын
I love South Dayton. I have a lot of family that live in the area and I always love to be there. Love the Super Duper! Also love all the tractor pulls.
@peterbaldridge4053Ай бұрын
Thanks for doing this. I turned to the web for help because the manual was so difficult to comprehend. I appreciate your taking the time to video and explain how you did it. I had a difficult time putting the hinge between the base and the bar together, and had to buy a large snap-ring plier to take off and then reinstall the snap and seeger ring.
@leiphaswАй бұрын
Very good review! Thank you! Sad the 3 year update was needed! 😢
@JamesKofferАй бұрын
Great video and review, thank you. I've been thinking of buying a backhoe for my CK4020, this was very helpful.
@winniesmith1239Ай бұрын
Lovely...Bernadene its my favourite. Gonna try it.
@Samuel_Gerner698Ай бұрын
Great video thank you for explaing that so concisely
@marianochavez7626Ай бұрын
😊thanks for help me
@ashmartin7374Ай бұрын
What awg should I use? Or is there a specific type ?
@bygraceilive656Ай бұрын
Tysm. ❤
@pd9935Ай бұрын
I love your voice and accent
@johnaustin6067Ай бұрын
Kabota to Kubota! Mandella Efect!😂❤
@aemarsh7004Ай бұрын
How do you change the bottom bar on the Enorossi sickle bar mower. I can't get mine to pull out. any suggestions would be great.
@blue_leader1833Ай бұрын
Wow clamp city
@happyrecluse2849Ай бұрын
Thanks a bunch for this video Tim. I have an 09 Bobcat CT235. It did not come with a Front loader and non were available other than after market. When I contacted Westendorf I was told that they could supply one that would fit my machine as well as as the Kioti version. Need to look on my tractor to see if I have the similar brackets as you do to accomodate the backhoe subframe. Well done on the Video just subbed. Take care
@galacticwarlock2271Ай бұрын
Why not just add a generator and a battery? You know what you a re doing for sure.
@mikejung3908Ай бұрын
Thank you sir, that was very helpfull, you did an excellent job, very well done.
@bobheale2521Ай бұрын
Great video. Now I need to find out how they framed the eaves
@aurodys2 ай бұрын
Je vais essayer de me lancer progressivement.sur un tenor mark 7 Merci pour la vidéo bien expliquée.
@andrejobin38102 ай бұрын
The lock on downriger is tight can not remove
@DavesCoolCustomBikes2 ай бұрын
Can this run off 12v batteries
@gregzais92482 ай бұрын
Thank you for sharing your experience and knowledge. You are like a great neighbor. I ordered my unit yesterday. I really appreciate your effort! Regards from Northern New York in the ADK mountains.
@AlanParsons-ih8wr2 ай бұрын
Thank you for your video it was very helpful to a first time electric motor wiring person .
@POSMhorsefarmer72 ай бұрын
Nice job! Thanks.
@POSMhorsefarmer72 ай бұрын
What do you do about protective fencing? Thanks.
@SongliW2 ай бұрын
Sir Very Good,雀鸟
@citymoto39212 ай бұрын
Do you remember how wide you made your gussets on your barn? In the photo at the end?
@ericpattersonk8eep9532 ай бұрын
Finger board on the start side should help hold on the start
@winstonsmkr2 ай бұрын
Thanks Tim, great video , subscibed and liked
@huntermark11602 ай бұрын
Thanks for the video. I'm in the process of building a windmill and I hadn't decided how I was going to tackle the sails. Your video just made my decision for me!
@huntermark11602 ай бұрын
One more question, What do you usually sell them for?
@waterdogtg2 ай бұрын
Very good instructional video
@natevisuals41203 ай бұрын
Very in depth, great video
@ThatGuyInPhilly3 ай бұрын
Thanks so much. Looks like I'll be trying this method for my one lens today...hope to nail it. I have a filter for my 67mm lens ready for Monday. Amazon sent be a cracked 95mm filter for my Sigma lens..., no time to get a new one. SMH!
Пікірлер
A beautiful ending to a beautiful video
I made a circle cutting jig for my bandsaw which took about 15 minutes and it sure saves a lot of sanding.
Im hoping someday i can make something like this for my jewelery workshop... i dont even care if it stays put. Just need a cozy dry space❤❤❤❤
Great teacher
That was very interesting it looked like some places I have been it in the US except for the animals don't see too many giraffes in the US.
very nice. i like the powerful singing.
Thanks for taking us along.
Have you considered setting your camera to high multitasking shot mode. This takes as many images as your camera is capable of as long as you hold down the shutter release.
That is so cute! I'm interested in making one (or more lol) myself. Thank you for sharing your video!
I was not able to give this video a thumbs up, and another video too! Scroo toobe is trying to clear out the smaller creators. Good luck, I'll keep trying!
🖤🤗🖤
🎉🎉🎉🎉🎉
My mum would make this when we were growing up in NZ.
I finally understand how to do a proper bird's mouth. Really nicely done video.
I reviewed this again. I think the bolts for the sickle bar deflector go the other way, so that the spring and nuts are on the outside.
Oh wow. 4 minutes of talk to change a paper filter. Time to go to the nursing home
loved it, no foolish music, calm and straightforward. well done, l just subscribed and liked !
I love South Dayton. I have a lot of family that live in the area and I always love to be there. Love the Super Duper! Also love all the tractor pulls.
Thanks for doing this. I turned to the web for help because the manual was so difficult to comprehend. I appreciate your taking the time to video and explain how you did it. I had a difficult time putting the hinge between the base and the bar together, and had to buy a large snap-ring plier to take off and then reinstall the snap and seeger ring.
Very good review! Thank you! Sad the 3 year update was needed! 😢
Great video and review, thank you. I've been thinking of buying a backhoe for my CK4020, this was very helpful.
Lovely...Bernadene its my favourite. Gonna try it.
Great video thank you for explaing that so concisely
😊thanks for help me
What awg should I use? Or is there a specific type ?
Tysm. ❤
I love your voice and accent
Kabota to Kubota! Mandella Efect!😂❤
How do you change the bottom bar on the Enorossi sickle bar mower. I can't get mine to pull out. any suggestions would be great.
Wow clamp city
Thanks a bunch for this video Tim. I have an 09 Bobcat CT235. It did not come with a Front loader and non were available other than after market. When I contacted Westendorf I was told that they could supply one that would fit my machine as well as as the Kioti version. Need to look on my tractor to see if I have the similar brackets as you do to accomodate the backhoe subframe. Well done on the Video just subbed. Take care
Why not just add a generator and a battery? You know what you a re doing for sure.
Thank you sir, that was very helpfull, you did an excellent job, very well done.
Great video. Now I need to find out how they framed the eaves
Je vais essayer de me lancer progressivement.sur un tenor mark 7 Merci pour la vidéo bien expliquée.
The lock on downriger is tight can not remove
Can this run off 12v batteries
Thank you for sharing your experience and knowledge. You are like a great neighbor. I ordered my unit yesterday. I really appreciate your effort! Regards from Northern New York in the ADK mountains.
Thank you for your video it was very helpful to a first time electric motor wiring person .
Nice job! Thanks.
What do you do about protective fencing? Thanks.
Sir Very Good,雀鸟
Do you remember how wide you made your gussets on your barn? In the photo at the end?
Finger board on the start side should help hold on the start
Thanks Tim, great video , subscibed and liked
Thanks for the video. I'm in the process of building a windmill and I hadn't decided how I was going to tackle the sails. Your video just made my decision for me!
One more question, What do you usually sell them for?
Very good instructional video
Very in depth, great video
Thanks so much. Looks like I'll be trying this method for my one lens today...hope to nail it. I have a filter for my 67mm lens ready for Monday. Amazon sent be a cracked 95mm filter for my Sigma lens..., no time to get a new one. SMH!
What keeps the exterior walls from blowing out??
Hey, you turned the tilter around this time haha