Пікірлер

• 
  @shawnmeimanКүн бұрын

  Why can’t find Barkbusters for my 2024 TENERE 700 ? Would you have a product number?

• 
  @MotoSouth20 сағат бұрын

  Should be the same part for all year models. There haven’t been any changes in design since it was introduced in 2021.

• 
  @markhall3434Күн бұрын

  '23 XSR9 here.. W/dominator twin can exhaust. VcycleNut's flash rocks! Best $300 mod you can do. Even if you decide to keep stock exhaust, you need this re-flash.

• 
  @MotoSouthКүн бұрын

  💯

• 
  @bookwormhands5 күн бұрын

  Did you attempt the install without removing the body work? Just wondering if that extra step is needed.

• 
  @TheMrChaddles7 күн бұрын

  Wow I had no idea that my Fz09 had these. I gotta go check lol. Where did you find the things you put on the wires to plug into the grey acc. connectors??

• 
  @MotoSouth7 күн бұрын

  I have a link in the description but it’s probably dated. I’m sure they are available still from another seller on amazon though

• 
  @TheMrChaddles7 күн бұрын

  @@MotoSouth I did some research and found some knock-offs (I’m assuming) on eBay. Thank you sooo much for your knowledge and your videos! Your videos are so detailed and legit compared to others by miles. You sir, are the man! So ahead of the rest. If it wasn’t for your Pro Taper handle bar video I would’ve never had the confidence to do it. Again, you are THE MAN! Thank you! EDIT: btw, I’m adding a voltage meter not a USB so I’m just assuming it will work with the acc plug?? I hope so🤞, do you think it will be fine? Or would you tap into different wires? If so which would you use? Sorry for the long comment but I’ve asked different FB groups and no one will reply 😞

• 
  @MotoSouth6 күн бұрын

  @TheMrChaddles the voltage meter should work just fine. All it does is read the voltage provided to the circuit when the key switch is on which should give you battery voltage with engine off and charging voltage with engine running.

• 
  @k0nanickАй бұрын

  look at your oil light when starting 🤙

• 
  @christopherparker6522Ай бұрын

  Hey man- I think I commented the first time I watched and used this video installing a ZumoXT on my t7, but swapping out my GPS and pulled this back up for some reminder tips on the connections. Great pace, visibility of components and explanation of steps. Thanks again!

• 
  @benyaeast4741Ай бұрын

  great video man super smooth tutorial 🙏🏽 im installing this to my zx10 but wanted to ask, would the black cable go to ground connection ? In your video you put it on the negative side of the battery, and putting on the red cable directly on the positive side of the battery, would that drain the battery ? cheers 🙏🏽🙏🏽🙏🏽

• 
  @TheWanderingGeezer2 ай бұрын

  Very well done. No BS, good step by step explanation. Thanks

• 
  @MotoSouth2 ай бұрын

  Thanks for watching 👍

• 
  @redallaround2 ай бұрын

  Just wanted to thank you for the awesome video. Sorry to hear about the hurricane damage, I hope that you've since recovered and are back out on the road. I ended up rolling the excess GPS wire into the empty auxiliary cavity on the right side of the cowl; there is an outlet that allows the cable to spit out right where the empty auxiliary connector is sitting. Again, great video, thank you for passing on the knowledge!

• 
  @MotoSouth2 ай бұрын

  Thanks for watching. As for the hurricane damage, everything is pretty much back to normal but of course they are predicting this year to be one of the worst seasons ever. Guess we’ll see 🤞

• 
  @redallaround2 ай бұрын

  ​@MotoSouth well fingers crossed its a smooth season and you keep the rubber side down.

• 
  @edwardgillatt16663 ай бұрын

  Great video and saved me £50 per hour on labour at Motorcycle Shop. Enjoyed working on the bike as that is part of ownership

• 
  @MotoSouth3 ай бұрын

  Awesome! I have almost as much fun modifying and working on my bikes as I do riding them 👍

• 
  @Marc-fn4ib3 ай бұрын

  Hello, I much appreciate your videos 👍 question what seat is they what you installed. Best greeting from the Netherlands

• 
  @MotoSouth3 ай бұрын

  I have the Seat Concepts comfort tall.

• 
  @johnvoit96293 ай бұрын

  Grear video!

• 
  @floreset4093 ай бұрын

  Tank you for showing all the details!😊

• 
  @here2enjoy-bt8jq4 ай бұрын

  Does 2023 and later vehicles need this airbox mod? Even xsr900?

• 
  @pmanning4314 ай бұрын

  K&N filter easier to install and take off.

• 
  @Spacchio4 ай бұрын

  Do they last? Isn’t rain and mud ruining them?

• 
  @MotoSouth4 ай бұрын

  They held up fine for the 4 years I had them

• 
  @traskabraska4 ай бұрын

  excellent, excellent tutorial! thanks!!

• 
  @ohenrycooper4 ай бұрын

  what is the electrical connector I need for this?

• 
  @MotoSouth4 ай бұрын

  Link in the description 👍

• 
  @Qrisco4 ай бұрын

  Where can I buy the headlight? The link says not available

• 
  @francisantony124 ай бұрын

  That was a fantastic video. Very useful - watched this 3 times - helped me a lot. ( I could also see the care you have taken with the high quality video and audio ) Thank you very much 🙏 🙏 🙏

• 
  @MotoSouth4 ай бұрын

  Thanks for watching 😁

• 
  @MoF9594 ай бұрын

  Hey, love the explanation! Is there any reason why I couldn't cut off the yamaha plug and just tie both cables to each other?

• 
  @MotoSouth4 ай бұрын

  Definitely an option. I just prefer to keep the factory harness intact and plug into it.

• 
  @Mieszkanierzeszow4 ай бұрын

  very helpfull thanks

• 
  @user-go6kv9qn5u4 ай бұрын

  The connectors you crimped come from the blank connector? 10min :19sec

• 
  @MotoSouth4 ай бұрын

  Got them from Amazon

• 
  @KotaRidez4 ай бұрын

  Did you have to use a drill press to drill the holes or can you use a regular drill?

• 
  @MotoSouth4 ай бұрын

  If you’re careful and center punch the holes, a drill should work fine

• 
  @51iohC5 ай бұрын

  code doesnt work anymore

• 
  @MotoSouth5 ай бұрын

  It’s been a while

• 
  @Maciekat5 ай бұрын

  Amount of paste 😮

• 
  @scottfast035 ай бұрын

  This was exactly what I needed!! Thanks for sharing!

• 
  @kostasrestas5 ай бұрын

  Can you do all this without remove the plastics???

• 
  @scottfast036 ай бұрын

  Great video. Thanks for sharing this.

• 
  @mrmidnight326 ай бұрын

  Will this work on the FZ09 in a legend car?

• 
  @MotoSouth5 ай бұрын

  Should work the same

• 
  @thorpsy1006 ай бұрын

  Has anyone recently bought from Motoinkz? I bought some years ago and they were good but some I bought a few months ago are terrible. Seems quality dipped a lot.

• 
  @andreaa.23956 ай бұрын

  Oggi ho montato le barre, il tuo video è stato di grande aiuto. Come da te indicato ho utilizzato il cric dell'auto sotto la pistra paramotore per mantenere la base allineata.. 🎉grande

• 
  @TarmacEJ2576 ай бұрын

  People should know that Leovince welds in the baffle, and you have to dremel out the screw... which is close to impossible without destroying the exhaust.

• 
  @MotoSouth5 ай бұрын

  Wasn’t the case with mine

• 
  @matthew56606 ай бұрын

  Do they mount with the engine ? Or the frame please?

• 
  @reyhatch34066 ай бұрын

  I'm wondering why the oil that came out from the drain plug hole was black and looked like it needed to be changed, but the oil from the filter clean? - That doesn't make sense to me.

• 
  @ardae54026 ай бұрын

  Hello. Is the barkbusters better for wind protection than the stock ones?

• 
  @garyrourke32846 ай бұрын

  That is my question also….I find the stock ones don’t protect very well from the cold ….hope we get an answer

• 
  @MotoSouth6 ай бұрын

  Not much difference as far as I can tell. You could go with one of the larger variations like the Storm for better wind protection. It would basically just replace the plastic shield part.

• 
  @andreaa.23957 ай бұрын

  Ciao ottimo video. Quindi possibile stringere i dadi anche senza chiave dinamometrica? Grazie

• 
  @kostasrestas7 ай бұрын

  what about Newtons at bolts??

• 
  @S.Michaelis7 ай бұрын

  Well done and extremely helpful video. As others have stated, thanks for taking the time making it.👍

• 
  @kostasrestas8 ай бұрын

  nice job man!! did your knees make any attache with the bars when you are riding?? also , when you have the steering wheel at full right or left position does hit the adaptor of bars under the headlight???

• 
  @MotoSouth8 ай бұрын

  No contact from either. They work great 👍

• 
  @luisortiz15738 ай бұрын

  If you want to sell the factory parts let me know

• 
  @TALENTCRAZY8 ай бұрын

  Im about to buy them, but I dont know if the basic or bunker version, Do you miss the extra engine protection?

• 
  @MotoSouth8 ай бұрын

  I’ve dropped the bike once since I’ve installed them and engine was fine. If you ride near a lot of large rocks then maybe it would be better to have the extra protection. Honestly, for me, now that companies are starting to offer more durable body panels, I’ve been thinking about ditching them completely to save a little weight

• 
  @andrewsmith9769 ай бұрын

  I got the Heed full set of bars for mine, exactly the same procedure only you also need to take out two extra bolts on low point of frame, on left side at low bolts worth cutting cable tie and applying new one once bars fitted. Great quality bars and really easy to fit.

• 
  @Josephdotcom9 ай бұрын

  This tool works down and up shifts?

• 
  @MotoSouth9 ай бұрын

  Only up shifts

• 
  @Josephdotcom9 ай бұрын

  @@MotoSouththanks

• 
  @Charlie-fc1mh9 ай бұрын

  Just watched this. That is unreal. Tuned for the stock settings. I'm thinking about getting the 2024 tracer 9 gt plus or either the mt10. I think I would rather go this route rather than buying a full exhaust and then having a remap done. We'll see.

• 
  @doctorv61979 ай бұрын

  I've got it....

• 
  @michaelcox154810 ай бұрын

  Great video - i just followed this to instal my heed basic bars and it would have taken waaaaay longer with just the included instructions.

• 
  @MotoSouth10 ай бұрын

  Thanks for watching 👍

• 
  @turboboy010 ай бұрын

  just bought one for my zx14r. went with the top mount kit. cant wait for it to get here. ill be doing more longer distance riding.

• 
  @nemerkha10 ай бұрын

  Just ordered the same for my WR. How bad is it when touring WITH baffle in? Say anything over 65-70mph?

• 
  @MotoSouth10 ай бұрын

  I normally ride with earplugs and honestly the wind noise is more bothersome than the sound of the exhaust which isn’t bad at all

• 
  @nemerkha10 ай бұрын

  @@MotoSouthgot it delivered and fitted. It’s fine with baffle, like it much more than stock. Rode it for an hour in town without a baffle though, that was just too loud for my liking. Had to ride with my mouth open!

• 
  @MotoSouth10 ай бұрын

  @nemerkha I prefer it with the baffle. Just right

• 
  @wetlifesports10 ай бұрын

  Nice Job!