Good stuff Man! David flashed my 2015 FZ09 a couple years ago. Absolutely awesome customer service!

Vcyclenut flash is the best mod I have done to my 2014 fz-09 so smooth! Great videos!

@MotoSouth

4 жыл бұрын

It’s a must have mod! Thanks for watching 👍

I had him tune my FZ1 a couple months ago, well worth every penny. Free life time tunes, just pay shipping. Turn around was great. 4 days I think from the time I sent it out til I got it back.

I had David from vcyclenut do the woolich tune on my 2018 MT10 two weeks ago and HOLY SHIT. It is awesome. So worth it. Best power mod period. Bike runs smoother than from factory only took 3 days total! Well done my friend 👌🏽

@MotoSouth

4 жыл бұрын

So many good reviews from his tunes!

I have a 2016 Fz09, with a black widow full exhaust, after I had vcyclenut tune my ecu. It became a complete different animal. Throttle choppyness was almost completely eliminated and decel is amazing. Highly recommended to do this with a full system.

@IBtraveling

3 жыл бұрын

Did you install the block off plates? I forgot what they're called but I already bought them a few months ago. They have something to do with deceleration. Thanks.

@MotoSouth

3 жыл бұрын

I have them to install and plan on doing it soon. They eliminate the popping on deceleration.

I have this flash on a 2017 XSR900, with an Akra exhaust and Sprint air filter. It's super smooth, and he's very quick to respond to emails. I get a decent amount of burble when decelerating, but no popping or flames.

Excellent! I’ve been thinking of doing this to mine and you’ve really helped 🤟🏻

Good stuff bud! You offically are my source for mod how to's now, good stuff!

Vcyclenut flashed the ecu on my 2016 R6 and it made a huge improvement

Great videos. I subscribed when I stumbled onto your videos when trying to decide between the MT-07 or MT-09. (I found a deal on a 2015 FZ-07 I couldn't pass on). Listening to you, I knew you weren't far from me and after watching this video it looks like we're in the same town. #supportlocal.

Hey man been following you since the first FZ 09 video. Great video as usual. Always something new to work on my own FZ 09 haha

@MotoSouth

4 жыл бұрын

Thanks for watching! This bike just keeps getting better and better with mods like this one 👍

Thanks so much. I was going to wait for the winter because i thought the turn around time was long for some reason. I may do it sooner now. Thanks again!!

@MotoSouth

3 жыл бұрын

He’s very quick. Highly recommended

Got the M4 slip on installed today was super easy time for the flash she’s much louder then I expected so I might piss off some naibors so I’m going to have to find a silencer that may be a little quiter but at least I’m safer now she was just to quite no on was hearing me coming on the freeway split commute thanks man

Had mine flashed using the woolich flash- and wow its woken it up- video coming soon! If you havent already, try TC off- with the woolich software its amazing how much the standard mode maps are changed. (not too sure about the vcyclenut) Cheers!

I'm a big fan of all your FZ/MT 09 instructional video's. Way to keep these video's short, clean and to the point. Just some MODS I'll do in 2021. Would like to see you do any of these: -installation of 320mm front rotors with spacers -larger master cylinder with bracket -steering dampener -basic maintenance like lubing cables, front shock service, front brake service, greasing swing arm pivot and keeping your 09 in pristine condition Much appreciated

@MotoSouth

4 жыл бұрын

All good ideas. I’m definitely liking the idea of upgrading the brakes! I also have a throttle body sync to do so I might as well film it. Thanks for watching 👍

Definitely a great video thank you for taking the time to put that together and doing such a great job I’m going to add my M4 to my 2018 MT 09 tomorrow I will definitely look into the flash next awesome video

@MotoSouth

3 жыл бұрын

Thanks for watching! 👍

@robertdean8102

3 жыл бұрын

@@MotoSouth I rode to work for the first time and the bike with the slip on it makes the bike sound complete I feel so much safer with some sound and it’s not as loud as I thought it’s perfect thank u man

ok I'm convinced. I don't mind a little bit of pop but right now the popping is just crazy.

Didn't know what a mud dauber was so I typed in "mud dobber" and I wasn't ready for the urban dictionary definition... anyways great video!!

@MotoSouth

4 жыл бұрын

😂😂

@swampmotoman9692

3 жыл бұрын

Lol

Ya daves great to work with, unfortuneately he wasnt able to figure out a flash for me but I did get my quick shifter & sprint filter from him. Re: your airbox mod. I did the same to my Z900 while the ecu was out. I did mine using the guide on Ivan's website & according to his dyno run graphs it literally made a 5hp increase over stock sitting on a dyno!! I'm guessing it's bc the z900's intake is literally only 2 square holes of about 1-1.5" on top of the airbox, underneath the gas tank. After my mod the intake is noticeably louder & pretty sure the exhaust is too, but without a doubt, you can really feel it in the top end. Of course that's with the sprint filter too though. That said i actually used the metal screen from the z900's stock filter to cover all of the new 1" holes in my airbox. If you use a step / uni-bit for drilling, the holes will come out perfectly smooth. I used some small pan head screws that fit through the holes in the screen, pre-drilled for them & then secured on the backside with silicon so they'd never come out, but you could also use flat locking tabs / nuts made for screws from lowes or Home depot etc. Wish I could add some pics bc it came out perfectl. A new kawi filter is like $15 & the steel mesh is really thin & solid, maybe there are some cheaper filters that use the same style mesh though. Either way, if your inlets are similarly small, I'd def reco taking the time to do it & do it right, I'm def impressed with the difference it made on my bike. Good luck & Great review ✌

@MotoSouth

4 жыл бұрын

I’ll have to look into that! Thanks for the idea 👍

Gotta do a video on your windscreen/deflector

"Quick one for you " 🤣 19 minutes is a quick one for you, i want to know the secret.

Hey MotoSouth!! I was wondering if you could make a detailed video of the front and rear wheel removal and install? I’m trying to save a little money when doing tire changes and I just wanna make sure I do everything correctly. Thanks man!

Yes that is smooth?

Do you have an iPhone ? If so did it ever mess up your camera while mounted to the bars using that mount ?

Ordered and shipped the flash for mine last Saturday. Lost my tracking code so I have no idea where my ecu is right now but I’m excited to get it back (hopefully not lost in the mail)

@MotoSouth

4 жыл бұрын

I'm sure it'll show up. Let me know how you like it when you get it installed.

@Thelonius_Magee

4 жыл бұрын

MotoSouth will do!!! Super excited! Also thanks for the discount code man!!!!

Great video as usual! Do you have T-shirts or other personalized "merch" available?

@MotoSouth

4 жыл бұрын

Not at this time. I’ve been thinking about a new logo so that’s been holding me back, but hopefully soon.

Liked the video! Keep them coming. What was the plus sign on your throttle?

@MotoSouth

3 жыл бұрын

It’s for the afterburners!....Just joking...that’s my Atlas throttle lock for holding the throttle on long trips. Thanks for watching!

Thanks for the very informative tutorial, Can you link the scan tool and link cable you used?

I have a 2019 racen black mt-09 and i was wondering, if i change exhaust and do the ecu flush but i actually like the popping sound, would they be able to keep it without many negative effects? Or is the popping a sign of not right programming?

@MotoSouth

4 жыл бұрын

Just let him know that you like it and you’re good to go 👍

On a stock 2020 MT-009 would there be a benefit to having the ECU flashed? Also how do you like that throttle lock? Did it slip at speed? I have the same unit on another bike.

@MotoSouth

4 жыл бұрын

Definitely benefits a stock bike as well. It will make it much smoother and you can choose options like removing the speed limiter and having the fan come on sooner so your bike runs cooler. And if you decide to add an exhaust later, he will re flash it for you 👍

Can u install an alarm system on your bike?

Did you take the kensmoto headlight off?

Thanks for the upload. Dumb question, can you disconnect the battery to clear the code like some cars will do?

@MotoSouth

4 жыл бұрын

Nope. Have to use the scan tool.

I noticed that you put your factory headlight back on did the Kenmoto headlight not work good? I like your videos you have the exact same bike I do expect for different mods done to it.

@MotoSouth

4 жыл бұрын

I still have it. Just changing it up a bit

i ride aggresively i dont notice anything wrong with the throttle except the deceleration causes cars to tailgate me too much

Does 2023 and later vehicles need this airbox mod? Even xsr900?

hey man i got a question, iv got a stock 2019 MT 09 but the first thing i want to enable is quickshiting and autoblipping before i do a pipe and the airbox mod ect.. , and i want to take advantage of the $20 bucks off , im looking at this : woollich racing Race Tools: Quickshifter, Launch Control, Pit Speed Limiter, my question is for US$481.00 am i getting everthing i need for quickshifting and autoblipping in that kit plus i pay him $250 on top of the $481? Am i looking at this correctly ? Happy safe riding - DaveD

@vcyclenut

4 жыл бұрын

Race tools is a woolich add on available on top of the woolich flash. The flash is still $250 and you need the race tools on top of that. So it’s $750 total. This includes everything you need for the quick shiftet/Autobliper and launch control. I don’t make any money on the race tools as I am not a dealer for woolich I offer it as an option for my customers so they can add it. I have to order the race tools from Woolich so that the race tools license is added under my account to flash it to the Ecu. Any other questions please let me know

I've mimicked your mods on my 2015 FZ-09, I had a question about the shift rod install as I'm stuck on that part! Do you have any tips for the shift rod install? P.S. Gosh darn it was hard to get to that last spark plug (the cap being turned around)

@MotoSouth

4 жыл бұрын

Is the rod too close to the engine? Is that the issue you’re having?

@DaniWhiteMoto

4 жыл бұрын

@@MotoSouth I believe it has good distance between the engine, my questions are in the spacing on the threaded rods. I have quite a bit of thread showing from the annitori quick shifter to the rose joint (I believe it's called)

how did you get a blue light on the QS?

What RAM mount is that on the handlebar?😮

Which price option on his website was your tune? He has options for $200, $250, $250 race tools/optional speed limiter and $250 with launch control

@MotoSouth

3 жыл бұрын

It’s the $200 option. The others require the race tools kit which I didn’t need.

Just wanted to ask. Do you still have engine braking functionality. I would like to flash the ECU but I don’t want to lose this function.

@MotoSouth

3 жыл бұрын

Yes I do

Cool..

Hello Can you fix the audio problem in the osmo action? I have been try four mics and nothing work well. affff

@MotoSouth

4 жыл бұрын

The setup I used in this video was with a Volbox mini plugged in between the mic adapter and the mic. Best results so far.

@hoguga

4 жыл бұрын

@@MotoSouth thank you! Volbox is basically a potentiometer? I dont have this in Brazil.. I will try build this box. Hehe

Great video! Just curious what wind shield that was?

@MotoSouth

4 жыл бұрын

Found it on Ally Express. It’s a DPM like design. Seems to be holding up well so far. I think you can find them on eBay and possibly Amazon by now

@Jdsnatt

4 жыл бұрын

@@MotoSouth found them on amazon but they don't ship for months and are quite costly. Trying to search on ebay

@loganearnhardt9392

4 жыл бұрын

@@Jdsnatt i got one of the chineseium ones from Amazon. Came way sooner than predicted, like 4 weeks early.... So keep that in mindm

How to install lowering kit

How does this affect wheelies? Does it negatively effect wheelies?

@MotoSouth

2 жыл бұрын

Throttle control is smoother, making it easier to modulate.

Have you noticed any change to your fuel range? Has gas mileage gone down? Stayed the same?

@MotoSouth

4 жыл бұрын

Haven’t noticed any difference

@hawkeye1680

4 жыл бұрын

MotoSouth gotcha. I reached out to Vcyclenut and explained what I was looking for. He did mention that fuel consumption could change but didn’t know to what capacity. Thanks again for the reply.

Hello, how has the reliability of this tine been?

@MotoSouth

Жыл бұрын

It’s been perfect! Highly recommended

Where in Louisiana are you? I'm in St James Parish. I'd love to meet up with you one day and check out your bike. I have a 2019 MT09 and am getting ready to send my ECU to David. I can't wait.

@MotoSouth

3 жыл бұрын

I’m in Houma. Looks like we are finally getting some good riding weather. I’m always up for a ride 👍

@waterborne4072

3 жыл бұрын

@@MotoSouth Ahhh Cool! I bought my bike from Cycle World in Houma. And yes. The weather awesome. I am putting some Road 5's on my bike Thursday to get ready for this weekend. Didn't realize we were so close. I'm sure we'll cross paths soon.

@MotoSouth

3 жыл бұрын

Nice. I worked there for 14 years. Got my bike from them as well. 👍

Where did you get the bolt with the bowl to fastn the xgrip on?

@MotoSouth

4 жыл бұрын

This one? amzn.to/2GFlVtJ

@2metermoto131

4 жыл бұрын

MotoSouth yeah thanks!

Great video and info! Best money i've spent on my FZ 09 hands down. Vcyclenut flash #4250 here.

How long did you run with a full exhaust before you did the ecu tune?

@MotoSouth

3 жыл бұрын

Probably six months or so. You can run an exhaust without the tune without issues. The tune will help you get the full performance benefits from it though.

@andygood4127

3 жыл бұрын

@@MotoSouth ohh ok. Thanks so much. Everything I read online and companies I reach out to ALL say that I must have a tune when I put on the full exhaust.

I have some questions... How long does it take to get it flashed? How much does it cost? How do I do this?

@tantojutsuninpo

3 жыл бұрын

You remove your ECU under the gas tank, mail it to Vcyclenut after purchasing the service on his website. More details there. Turnaround time is generally a week or less which is very good.

@Echo4Yankee

3 жыл бұрын

Thanks man. I think I'll do this over winter, when I am unable to ride.

Does it void warranty when you have it flashed?

@MotoSouth

4 жыл бұрын

That would be a question for your dealer. I would assume that any damages related to modifications you make would not be covered by warranty

Should’ve pulled the AIS off while you were at it. South La you sound like saint Martinville type people.

@MotoSouth

Жыл бұрын

I did eventually remove the AIS. I’m in Houma

@Cavemandjd

Жыл бұрын

@@MotoSouth stopped your backfire problem? I’m flashing mine next month. Oh that’s right down the rode from MC.

@MotoSouth

Жыл бұрын

Yes it did

Is the block off plate mod necessary for this tune

@MotoSouth

3 жыл бұрын

It isn’t necessary. The AIS is disabled in the tune but the plates would help to almost completely eliminate the popping. If you don’t mind a little popping and gurgling, they aren’t required

@Nepypr

3 жыл бұрын

@@MotoSouth oh I love the pops and bangs lol Thanks for the reply brother. 😎

@MotoSouth

3 жыл бұрын

If you get a tune just let him know that and he’ll hook you up 👍

Was this the woolich or the FTECU flash by him?

@MotoSouth

Жыл бұрын

FTECU

@steve7572

Жыл бұрын

@@MotoSouth I just got mine back yesterday and didnt have a check engine light from the FTECU flash. 2020 MT09

@MotoSouth

Жыл бұрын

I’d get in touch with David to make sure but I thought they all triggered the light once flashed.

@steve7572

Жыл бұрын

@@MotoSouth From his website, the Woolich causes the CEL. The $200 FTECU flash isnt supposed to and mine did not

@steve7572

Жыл бұрын

@@MotoSouth Maybe you got the Woolich flash. Was it something like $250?

dyno or i dont believe :)

code doesnt work anymore

@MotoSouth

5 ай бұрын

It’s been a while

Do you have instagram

Why people want to "smooth out" a three cylinder enginge famous for its aggression and character? To compensate for the lack of riding skills? Buy an inline four if you want smoothness. For power? You get minimal gains after a flash and 99% of rider's out there couldn't tap into it anyway. As an MT-09 owner as I rack up the miles I feel less and less the need to get the bike flashed, except for the suspension.

@MotoSouth

3 жыл бұрын

The smoothness from a flash is referring to the on/off throttle transitions. It doesn’t change the character of the engine. I don’t think I’ve seen anyone ever say they regretted having their 09 flashed by VCyclenut. If you enjoy a jerky throttle then keep doing what you’re doing. That’s the beauty of customization, making the bike the way you want it.

great video. besides that God awful music. theres no reason for it.. just my 2 cents.