XYZ Printing da Vinci 1.0 Pro MK10 M7 Nozzle Upgrade Kit Instructions
Ғылым және технология
Buy the kit here r.ebay.com/ZIMB9B
First time using the adapter the anti-seize will smoke and smell.
This will subside.
Its recommended using the load filament setting to run the hot end for a few minutes.
Пікірлер: 34
What is the L shape bracket for? The video doesnt show the use of it. Also the ebay link is not working.
This seamed like a great printer combo when I first got it. Then I found that the scanner didn't work and had to send it back XYZ for 5 weeks for repair. In the end they sent me a different unit that worked for a few days until the nozzle got jammed with filament and deformed during cleaning. I purchased this replacement a few days ago, installed it this afternoon (watch video in full before trying to follow along). My 20mm box quick test came out perfect so it is now working on a lithophane. This greatly increased the length of the nozzle. I had to lower the bed 5+ full turns and max out the Z offset to manually level the bed.
To manually level I made a bracket that clips onto the rails and a digital tire depth gauge fits into that, works better than anything I've used before.
I finally got around to fitting mine, physically measured the difference between the old and new and I came up with 12mm, fitted up with new z angle (+8mm difference). In the end I had to change my z offset +6mm to what it was otherwise it would hit the bed ( was at 1.31, now at 7.31), not sure exactly why but it works perfectly, new nozzle prints much nicer. thank you
Watching this video I realized that XYZ Printing could sell these parts as they are all simply "plug and play" items. I just replaced my heating rod ($2.50 on eBay) but had to cut, solder and reinstall the connector myself. I would have gladly paid $10.00 to XYZ if they had just sold me the damn part instead of trying to rip me off another $100.00 for a complete module. Totally ridiculous!
@Bobster986
6 жыл бұрын
p.s.: Where does that metal L bracket go? Thanks!
@pnwRC.
5 жыл бұрын
I've replaced my $100.oo+ part once already due to clogged nozzle. It would plug after 20-30 minutes of printing. I will NOT be buying another of their crappy $100.oo parts just to get a nozzle. I'm going to do this conversion to my printer! Thanks for a great video!
how come you dont finish the video is there a part 2 ?
Hi Christopher Great Mod for my davinci pro printer. Printer working fine. The Angle bracket fits fine to ajust the z axis Hight £40.13 well spent Thanks
@chriscalderone
5 жыл бұрын
That is great to hear, thanks for the feedback!
@Benvw83
4 жыл бұрын
Where can I get this kit plz
Permatex brand (the original anti-sieze) does not smoke or stink. It's a genuine high temperature product.
Does anyone know if this works for the 1.0A? Looking to updgarde nozzles and this looks like it will fit the bill but I would like confirmation before pulling the trigger on this.
If this mod had a slot for the stock auto leveling pin this would be perfect and still get you all the functionality, but overall a great idea.
I can't find your kit on eBay. Can you please tell me where to buy it?
Sadly the link and some searching on Ebay aint working anymore.. Could you provide a new link or name of the/similar product? The one in your video is quite different from the original.
L'angle n'est pas un support mais il sert à situer le plateau en hauteur; En effet conre l'axe vertical, il y a un angle d'origine. Si celui-ci est plus court, il faut le changer car la tête est plus basse.... et hop
whats the bracket for ? Hows it go on ?
Hi, bought one of these from you last year, but the printer has been so good, I never changed it, today I decided to install it, and found a hole in the bag, and the nozzle has gone, can I buy a few 0.4mm spares from you, or could you tell me the thread size, as the spares i have for my delta do not fit, they are too small, thanks in advance - bob
@chriscalderone
4 жыл бұрын
You can buy the nozzles for around $1 each, like this BIQU Upgrade Wear Resistant MK10 Nozzles M7 0.4mm Threaded Stainless Steel No... www.amazon.com/dp/B01GG1F006/ref=cm_sw_r_tw_dp_U_x_OrmTDbQ0QBDQM via @amazon Please make sure that the larger tube does not stick out longer than the nozzle, I added pictures to the listings. I found when the larger tube sticks out of the nozzle, the tube get squashed and causes jams.
Can you do a video on how to change the extruder head on the Da Vinci cartridge. I was able to take apart the cartridge but need to know what size nozzle to get.
@chriscalderone
3 жыл бұрын
I don't understand the request. XYZ uses .4mm holes on the nozzles.
@rosebarrette6292
3 жыл бұрын
@@chriscalderone I want to change the nozzle but XYZ makes it hard to change it.
bom dia amigo onde consigo comprar um kit desse ?
@Intercom_e_Cia
5 ай бұрын
Olá Guilherme, conseguiu achar o kit? Estou com essa questão pendente também. Não acha peças para essa máquina aqui no Brasil
Where can I buy this kit please ?
@chriscalderone
4 жыл бұрын
eBay, search XYZ nozzle.
Auto leveling is non existent after this mod i take it? Yea, i know... manual leveling is what most do with this printer... just asking.
@chriscalderone
5 жыл бұрын
We do now ship a screw that can be added for auto leveling. We made the screw a little shorter than the tip so you will have to use a metal shim between screw and the leveling pads. I assume must people just use manual leveling. Chris
The video ends before showing how to install the angle bracket. Not good.
@Jwall1310
5 жыл бұрын
It goes on the bed to set Z level
@djdafish
4 жыл бұрын
Undo the screw, remove old bracket. Put on new bracket, reinstall screw. Done. Doesn't really need a walkthrough video.