Hack 3D XYZPrinting Da Vinci 1.0A STOCK All Metal Hot End: Part 1
Тәжірибелік нұсқаулар және стиль
How to improve the Da Vinci STOCK ALL METAL HOT END. Great printer for the money, needs a few hacks. In this series, we'll go through them. Crafted Channel. Did you subscribe?
Check out my Bushcraft, Camping, Maker and Machining content. I enjoy knife and ax making, leather work, metal work, machining, Blacksmith and general do it yourself projects. I am an individualist who see's mankind in the light of his highest positive potential.
Facebook:
CraftedByDave/
Playlists:
Get Home Challenge 2015 - 20 Mile Trial
• Get Home Challenge 201...
Craftsman Atlas Lathe Setup and Repair
• Craftsman Atlas Lathe ...
BOTT - Back of the Truck Series
• BOTT - Back Of The Truck
TTW - Through The Week Projects
• Through The Week Proje...
Crook / Spoon Knife From Reciprocating Saw Blade
• Crook / Spoon Knife Fr...
Optimus 8R and Similar Stoves:
• Optimus 8R and Similar...
Atlas Lathe Quick Change 42 Refurb an Restoration
• Atlas Lathe Quick Chan...
Join me as I craft my own home Knife and machine shop. My goal is to improve self sufficiency in all homesteading, survival and maker skills. You can do it also. I believe in getting my hands dirty and getting it done. I like Clausing, Craftsman, Atlas, South Bend and Logan equipment. Follow my journey as I learn what I know and what I don't know. We might even talk a little philosophy here and there.
Now, go and get your hands dirty! Make something.
Music used: Dance of the Pixies by Jens Kiilstofte machinimasound.com/music/danc...
Licensed under Creative Commons Attribution 4.0 International (creativecommons.org/licenses/b...)
Пікірлер: 5
Just an FYI: you can totally disassemble the hot end from the aluminum pipe to clean it out. It unscrews and is not welded. I disassemble and soak them in acetone for a few hours.
@CraftedChannel
7 жыл бұрын
I took one down in part 2 of this short series. Yes and it is all metal. At the point I had video'd it, other channels were talking about "upgrading" to all metal. People were under the assumption is was not all metal. Most people still believe that today.
Very well explained video. Out of the 12 hrs of printing, how many times have you had to clean out a clog? From what I've read, the E3D hot end is a magnitude better. The size and fins will help a ton with heat management. But hey, you know that already.
@CraftedChannel
8 жыл бұрын
+eviltwinx It happened once I'd guess around day 8, then it happened recently and effectively I have to take it apart clean it, I get one job, then the next one fails if I don't clean it. Thus why I'm trying to address the problem with real changes to try to prevent it again.
dont put your cat in the 3D printer it is dangerous