🔧 XR400 - Rear shock absorber rebuild, part 2 - assembly
Автокөліктер мен көлік құралдары
It's finally time for Honda XR400 shock absorber rebuild :D
In this episode you can see assembly process using new parts. This video is extremely long but it was hard to make it shorter. To navigate it easier, you can see table of content below
In this wideo you will see:
▶ Intro 0:00
▶ Compression adjuster assembly 0:13
▶ Seal head assembly and installation 3:35
▶ Piston assembly and installation 6:50
▶ Rebound adjuster assembly 10:51
▶ Piston and sealing head installation 15:21
▶ Bladder assembly and installation 16:41
▶ Filling the shock absorber with oil 18:25
▶ Charging the reservoir 20:53
▶ Rebound adjuster test 21:40
▶ My fail 22:12
▶ Spring installation 23:26
▶ Upper bearing 24:55
▶ The end 26:08
=============================================================
XR shock absorber rebuild:
-PART 1 disassembly process: • 🔧 XR400 - Rear shock a...
-PART 2 assembly process: • 🔧 XR400 - Rear shock a...
=============================================================
Feel free to ask questions in the comments or contact us on Facebook!
Facebook:
/ dmmotoadventures
Instagram:
/ dmmotoadventures
#xr400 #shockrebuild #service
Пікірлер: 29
Aerospace level mechanical skills
@DawidMartasMotoAdventures
2 жыл бұрын
Thanks :D
Grazie.
You did a excellent rebuild very detailed. Thank you
@DawidMartasMotoAdventures
3 жыл бұрын
Thanks, you are welcome :)
great video, thank you for all the advice
First class work! and a top Notch Video> Hope we can see the rest of the bike!
Outstanding
Simply awesome , your knowledge and skill . Want to bring my shocks to you .
thanks nice work!
@DawidMartasMotoAdventures
2 жыл бұрын
Thanks :)
Hello, interesting video. I also watched the first video about dismantling this shock absorber. It's nice that you show you how to do what. I myself have a shock absorber for KTM SX250 from 1990 disassembled. I couldn't find the 46x14mm seal, but I made it. I still have to order a sliding ring for the piston. I can't find the original anywhere. Mine, on the other hand, is damaged, and then folding. Thanks for a great video. Regards.
Cuantas libras de nitrógeno necesita ?
Hello! Can you do a video of how to replace fork sealings on XR400R? Or do you know any other video in KZread on how to do so? Thanks for feedback!
Panie Lux robota:)Gdzie dostałeś teflonową opaskę i teflonową tulejkę do wkładu uszczelniacza?
where did you get all the service items for the shock?
Hola Amigo Buen Trabajo Como Se Llama La Herramienta De Litrogeno Que Tiene
Excellent video thanks for sharing. Only problem I would have doing myself is I can't find replacement parts. Where did you find new parts? Thanks again
@DawidMartasMotoAdventures
2 жыл бұрын
Thanks :) Piston ring and oil seal is custom-made on special CNC machine.
Jaki oring idzie do mechanizmu regulacji 52440-kcy-671? Z góry dzięki
Al 11:20 In my case it doesn't go back, I have to push from below with a pin to make it go back. why??
Jakie ciśnienie nabija się do tego typu amortyzatorów? 🤔
@iskraenduro4155
2 жыл бұрын
8-11 bar.
Give the file for the piston ring guide
@DawidMartasMotoAdventures
2 жыл бұрын
Sorry, I have no idea where is 3D file. I have this printed ring and I just measured it: Piston side or bottom of the ring is OD 43,05 and ID 34,25. Height is ~20mm. Top OD is 41mm, so it is cone 1:20.
@chaselittle2601
2 жыл бұрын
@@DawidMartasMotoAdventures thanks for the reply. What are the lengths of the m4 set screws?
@DawidMartasMotoAdventures
2 жыл бұрын
@@chaselittle2601 One is 8mm, second one is 4mm :) Cheers!
yeah ill just buy a new one lol
@DawidMartasMotoAdventures
2 жыл бұрын
Is it still available? :D