You can remove the fork-thing on the lower end, its threaded onto the shaft. (Instead of disassembling the thing if you forget something again) 😀

@brian.d.mobley

3 жыл бұрын

I did not know that! It’s been some time since I made this video, so I dont recall exactly how that component looked, but I didn’t think that part could be removed from the shaft.

how much amount of shock oil did you use. watching from Philippines

@brian.d.mobley

2 жыл бұрын

Hey Ralph! That varies depending on the shock you are using. Check what the manufacturer recommends to be sure

Was your Tusk shock seal bullet the 16x12mm one on Rocky Mtn ATV?

@brian.d.mobley

Жыл бұрын

This is the one I used: amzn.to/3yeB2DB

Hello i have 2 questions how much do you fill the suspension and do you turn the thing to H or S

@2headedeagle356

3 жыл бұрын

@@brian.d.mobley yeah but they havent been able to fix it i have a kawwasaki 500cc 2 stroke 2001

Hello .i 'm rebuilding 08 crf250r rear shock absorber. I made a mistake. I messed up the compression washers. The last 6-7 washers and the stopper came off while removing it. I'm not sure about the marked, last 6-7 washers. Thanks for your help

@brian.d.mobley

2 жыл бұрын

Hi M Mab. Im not sure if you are asking for help or thanking me for the help the video provided, but I think its the later. Thanks for watching!

@mabmab5713

2 жыл бұрын

@@brian.d.mobley actually both. great video.actually i need help.I'm not finished rebuild rear shock.rebound shims shuffled.bottom row I have 6 shims that I'm not sure about. It looks like your setup. 40x0.3 - 40x5mm (base plate) -25.25x0.60-25.25x0.60- 22x0.20 -22x0.20 26x0.30...

@brian.d.mobley

2 жыл бұрын

@@mabmab5713 Im sorry, but I dont have those dimensions and I do not have a disassembled shock to reference right now.

Links for parts?

Sir rear suspension of crf 450 can be installed to xr 250r?

@brian.d.mobley

3 жыл бұрын

Hey Ernesto! Off hand I don’t know. However, look for groups on Facebook for CRF and/or XR owners and pose that question to them.

@davidandrew3481

2 жыл бұрын

@@brian.d.mobley how do I find a genuine XR250R rear shock

@brian.d.mobley

2 жыл бұрын

@@davidandrew3481 I really don’t know. But I’d look for groups on Facebook that are dedicated to that bike and ask the group for help.

What sandpaper grit did you use on the spring

@brian.d.mobley

Жыл бұрын

Hi Henry: I used several grits, but ultimately finished with 400. Spring steel is ULTRA hard and the grit becomes somewhat irrelevant. Even aggressive grits wont score the surface very much so just strive for a smooth scuffed surface free from any burrs. Thanks for watching!

@hmautospa

Жыл бұрын

@@brian.d.mobley thank you

Hi Where can I get the parts from? I can’t find the split oil seal

@brian.d.mobley

2 жыл бұрын

HI! I got all the parts from Rocky Mountain ATV.

@sukhipandher9090

2 жыл бұрын

Was it a cr 250 or 500 shock?

@brian.d.mobley

2 жыл бұрын

@@sukhipandher9090 CR250

staking not necessary from forums consensus. red Loctite and torque to spec

@brian.d.mobley

3 жыл бұрын

As soon as I don’t stake, a bunch of other people will comment that the service manual recommends staking. It can’t hurt to detent the thread, so I follow the Honda service manual technique

@carlosbarragan6729

3 жыл бұрын

@@brian.d.mobley totally agree. great video, it helped me lots. it kills me to see honda hammer away everything. race tech instructions use no stake fyi

@brian.d.mobley

3 жыл бұрын

@@carlosbarragan6729 I agree. It seems barbaric. I’ve actually found a new way to do it, but still involves a hammer. I don’t like smashing things with a hammer.

Shock honda cr85 ??

@Totalfithouston

4 жыл бұрын

Hey Bruno! This shock was off my 2002 CR250. I may rebuild the CR85 shock soon and if I do, I’ll post it here,