This is the best video I've found regarding Honda XR USD/inverted fork conversion. Thank you! I had to resort to internet forums when I wanted to swap my old XR250 and ended up buying old CR500 triples and cobbling together parts to make it work. Good job!

Based on what I found, 2005 - 2007 Suzuki rmz triple tree fits, stem height etc. The conversation bearings ar 30x47x12 and I used a thrust washer spacer for a perfect fit. Now any 47mm fork should fit 💪👉👍🤞

Very helpful. Thank you! I Love that you included part numbers.

@MakeFixUpgrade

10 ай бұрын

Thanks! Glad you like it!

Thanks for the video I'm in the process of doing this swap myself

@MakeFixUpgrade

Жыл бұрын

If you have any questions let me know!

@tomcooley6019

Жыл бұрын

@@MakeFixUpgrade any chance you could provide links to the exact parts you ended up using?

@MakeFixUpgrade

Жыл бұрын

@@tomcooley6019 the part numbers are in the description. I’ll see if I can track down the links tomorrow.

Nice job

nice video man

@munoz20

Жыл бұрын

post riding videos would love to see a walk around and ride of your 400

@MakeFixUpgrade

Жыл бұрын

Thanks! 🙏

Bought a 99 brand new..put an aloop kit and whitebros pipe. Wish i still had it

@MakeFixUpgrade

Ай бұрын

They’re a great bike!

Wondering how the headlight mounted up the CRF triple clamps? Or does it just mount onto the tabs onto the side of the clamps?

@MakeFixUpgrade

Жыл бұрын

Headlight mounted fine. No modifications needed. The rubber clamps fit perfectly.

How was the balance between shock and forks? What are your clicker settings on the suspension? Cheers!

@MakeFixUpgrade

Жыл бұрын

The balance felt good to me. I don’t recall the clicker settings. This was a project bike that I bought to rebuild. I have since sold it.

How much longer are the CRF 47 mm forks than the stock XR 400 forks? And how do you compensate for this? Can you just run the forks higher in the clamps enough?

@MakeFixUpgrade

Жыл бұрын

I believe the CRF shocks are about an inch longer. You can run them a little higher in the clamps if you want to. I'm not but there's some room.

so. . i guess my question should be is, the pivot works pwssk ho4 420 the smaller bearings for the cry stem and the xr race?

@MakeFixUpgrade

5 ай бұрын

The pivot works pwssk ho4 420 bearing set is used if you buy the replacement stem from XRs Only website.

💪💯😎

What sort of terrain did you ride with the XR400? Think it was worth upgrading to the larger USD forks for trail riding?

@MakeFixUpgrade

Жыл бұрын

Mostly local trails and fire roads. I personally like the USD shocks better but I wasn’t unhappy with the XR forks. I felt the USD upgrade provided better handling. I’m not always trying to ride at full capacity though. If you have the cash to do it it’s a fun upgrade.

very nice. how much clearance do you have between the forks and tank?

@MakeFixUpgrade

Жыл бұрын

It just touches the tank. I’ve seen some where you drill the lower clamp and install stops but I didn’t do it.

I need the part number for using the crf steering stem on the xr400

@MakeFixUpgrade

4 ай бұрын

I replied to your other comment with details of where I got the bearings.

Why not apply some heat to "the triple tree" to put the new stem in?

@MakeFixUpgrade

9 ай бұрын

It’s a pretty snug fit. You might be able to heat it and beat it but the press works great.

What is the part number for the thinner bearings to use the crf stem..? Thx

@MakeFixUpgrade

5 ай бұрын

I bought the thinner bearings from TWF Racing. I emailed Zoran at twfracing.com and told him I was looking for bearings with the measurement 30mm ID X 47mm OD X 14mm thick. He gave instructions for how to pay and shipped them to me. I actually still have several sets and some spacer washers as well. You can dm me on IG @make.fix.upgrade if you're interested in them.

Hi, are you still happy with your fork swap ? I was thinking about replacing spring by stiffer racetech in addition to racetech gold valves, especially in order to keep original fork and look.... but I'm still in reflection time ^^. Thanks for your feedback.

@MakeFixUpgrade

3 ай бұрын

I liked it while I had it but have since sold the XR and switched bikes.

Also will the XR wheel bolt right up or do you have to get CRF wheel and hub?

@MakeFixUpgrade

Жыл бұрын

I didn’t try to mount the XR wheel. I just bought a used CRF wheel and hub assembly.

@1176hambone

Жыл бұрын

Spacers can be used for XR wheels. Emig racing is a good resource on these USD conversions

So if I buy the xrs only rod piece I can just put a crf front end in my 85 600r no machining anything?

@MakeFixUpgrade

10 ай бұрын

I’m not sure for an 85 600. I would check with XRs only to confirm the year range

@Fieldyfan94

10 ай бұрын

@@MakeFixUpgrade I tried but there customer service is horrible never even replied

Do u know if I can do de same but with a crf 450 as a donor for a xr400r?

@MakeFixUpgrade

5 ай бұрын

I believe so. As long as you can source some bearings it should work.

@josetomas1111

5 ай бұрын

@@MakeFixUpgrade thanks

Steering stops?

@MakeFixUpgrade

5 ай бұрын

I didn't end up putting any on.

You got a lot of $ in that bike.

@MakeFixUpgrade

Жыл бұрын

Haha yes I do!

Y

@MakeFixUpgrade

Жыл бұрын

Because I can.

nice installation! 1 to 10...... how much better is the ride now?

@MakeFixUpgrade

Жыл бұрын

@Jeff Silver thanks and I’d say a 10. Definitely worth it. More stable, more suspension travel, doesn’t dive like the stock forks do.