XJ Rear Tire Carrier Install - JcrOffroad
Автокөліктер мен көлік құралдары
In this video I'll show you how to install the XJ rear tire carrier from JcrOffroad. This thing will hold a spare tire, a hi-lift jack, 2 rotopax cans, a CB antennae, and your license plate w/ light. Pretty sweet!
Watch the Entire "Hope Floats" Build Playlist from Day 1: bit.ly/1oJBIe6
Website: www.bleepinjeep.com
FaceBook: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
Пікірлер: 328
Those tires are no joke!!! I thought you were kidding, I can't imagine how difficult it would be changing a tire on one's own!, looks amazing, someday I wish I can do that to my XJ
This is much better thought out than some others ones I've seen. I really like the small thoughtful details incorporated into it.
It's hard to tell since I'm watching on my phone.. but I think you put the seal in backwards.. it looked like the lip (with spring) was facing out.
That unit looks SHARP! I like it!
That looks so well made and expensive. Great vid
I love your channel I just bought a 1991 and your jeep is the inspiration for how I want to build my jeep! thank you for your channel and great feed!
God bless your mailman! Nice install. Looks solidly built.
I have got to admit I have never seen anyone bet their bearings so proficiently. When we filled bearings we used a sweeping motion, I think I like your method better, looks like it gets the job done much faster.
The color of your Jeep is just awesome!
This is the best project I've seen so far. Great job
I worked in the shipping department at JCR for a little while. those tire carriers were fun to box up lol
@bleepinjeep
9 жыл бұрын
tyler geipel everything comes in rectangular boxes now with foam.
@geipelstoys9923
9 жыл бұрын
yep, spraying that foam in the boxes got interesting at times lol
I have to say that I really enjoy your videos. Just bought a 98 zj. Hoping to build an overland out of it.
3:19 the neighbors are gonna think I'll be doing something else lol
@theronellis1514
4 жыл бұрын
lmao
Great vid, I used coiled wire for my license plate lamp and 3rd brake lamp on my TJ, helps with the swing out.
Enjoy your stuff Matt. Good Job of showing your work in a fun way.
Love the mail man helping lift the tire Lol
Damn man...I let my son watch this & ur on the screen greasing up and slappin that bearing.
I’m a land cruiser owner and I enjoy your videos Thanks. M
how many times did u put that part on loosely
I have never saw anyone pack a wheel bearing like that. It gave me a good laugh.
@xxRamD3yruxx
9 жыл бұрын
retiredppd I thought you push it in from your palm, not pat it in
@robertwebber2107
6 жыл бұрын
You have to admit that it did work though.
@moose2934
5 жыл бұрын
Easily the most R-rated BleepinJeep video out there
@mustang7288
5 жыл бұрын
retiredppd That’s actually how you packet dumbass
@sleepy6636
5 жыл бұрын
Sounds like Rudy is an expert in packing
I drilled holes and add grease nipple in my tire carrier so I can top up my grease
Those birds chirping are so peaceful
That is a sick rear bumper kit. Wow I need this for my xj
This would definitely be worth the time to do I have an 01 Cherokee with no rust whatsoever on the body
Before installing the spindle to the bumper you can use it to set the lower bearing.
does anybody know if the bumper and tire carrier in this video will work on a mj
i'm watching your videos, and i don't even have an XJ, one day i will.
@javiroo1743
8 жыл бұрын
same here.. don't hurt to dream wright?
@josepttellez5662
8 жыл бұрын
+javier hernandez yup I hear the 1999 had the best engine
@Transphoenixbiker
8 жыл бұрын
+Jose Pt Tellez nope nope nope....98 is the last good year after that they have block cracking issues.
@adamswaz4878
7 жыл бұрын
Not block cracking , 0331 stamped heads have head cracking issues
@laqutis1119
7 жыл бұрын
bentovergarage Wrong
Bleepinjeep could you do another video on a different rear tire carrier? This is an awesome video, I love to see it w a different tire carrier. The JCR is cool but @ $1800 (after you add the powdercoat and brackets for rotopack+jack) it is crazy expensive. Think of all the other things you could do w/ that $$$$. Are there any other rear tire carriers you'd recommend?
Where did you get the XJ painted? Looks like a pretty good paint job.
Nice work 👍 With my best regards From RIYADH Capitol of SAUDI ARABIA
love the set up
Mom-“what are you watching?!?” Me-“How to pack grease”
Looks awesome . Nice job .
Hey does any one know the name of those wheels love the look plus nice video!! Thanks
Hello, thank you for your video, it is very detailed. I've been looking for that rear bumper for a while, do you know if I can buy it somewhere?
I'm about to buy a used one of these. How is it working since this install?
I screwed up and bought the OR FAB Cut n Fold rear bumper. It's a great bumper, but I want a tire carrier, so I can use the back for more camping gear.. Gonna have to make a custom hitch carrier now..
love his videos how could I get some bleeping jeep stuff
I've been looking for something JUST like this, but for the WJ Grand Cherokee. Got any links to one? I won't how hard it would be to modify one of these to work with a WJ?
I wish they'd make some of this stuff for my 4Runner!
Total weight of bumper and tire carrier portion? (without tire, hilift etc)
finally got my xj.. what's the totol cost on that setup?
So can this be installed on a different rear bumper?
im watching your videos in my xj.....i think i love my jeep yo much lol
I sure would like to purchase just the latch assembly and the locking pin assembly for a custom project I'm working on
Great job, like it.
Great video! I have that bumper and carrier & i love it! Very well built & it looks great
This is a great looking carrier BleepingJeep. Very good design. Is the latch a two stage catch?. Just like a car door type. I don't want to be picky but I think you have installed the grease seal upside down. That thin section of rubber that stands up that you faced down is meant to rub on a flat surface on the stub axle and seal out dirt/sand. If you look at the steel section of the seal, look at the end you are hitting with the punch carefully you will notice it has a chamfer. This makes starting or inserting the seal into the housing easy. Trailer axel seal it is and they are fitted this way. Also grease the seal's lips before fitting on to the stub shaft or axel. The main lip is the one with the small tension spring on the inside of it. The way you fitted it this spring is now exposed to the weather or elements. Springs are only on good quality seals. I like all the work you do on the Jeeps. It's good to see someone having a go.
i have a 01 jeep grand cherokee do u have any wed sites that i can get something like that and any other body armer and bumpers
Wonder if that swing nut ever got properly tighten
Great videos so far! What kind of bumper do you have on the rear that you mounted the swing arm to? Thanks!
@dirtysouthtv2209
3 жыл бұрын
JCR Off-Road rear bumper and rear bumper accessories. Then there are the rotopax, the high lift jack and the license plate relocation bracket.
What color paint you got on that XJ? Want to put it on my bronco
Nice jeep!
Anything similar for 1998 Jimmy?
Nice design wish they made similar unit for jk
do they make one of those for the zj
Good video, thanks man 🍻
very very nice bro...
Very nice I subscribe cause my pore 96 Jeep is parked bad knocking. Going to put new motor in soon. And want to fix it up thanks for your help
Super video
This video is 7 years old and this is still one of the best looking tyre carriers on the market. The only thing I don’t like is that it blocks the indicators a bit.
What color would you call the paint job on your truck?
Is that bumper and carrier still available?
Did anyone else notice that this tire carrier entirely blocks BOTH reverse lights?
@Keith1212
7 жыл бұрын
Yes lmao! Jeeps have never been much about safety.
@aznes004
7 жыл бұрын
The bumper has cutouts for LED lighting
@markyboi79
6 жыл бұрын
Real men don't ever need to go backwards!
@zzz7zzz9
6 жыл бұрын
who are reverse lights for anyway?
@zzz7zzz9
6 жыл бұрын
dumber is that it completely covers the license plate. I have never liked a swing-away tire carrier. I like having sight out my rear window. I carry my spare on my roof rack, plus there, it's weight is evenly distributed on the vehicle.
Love the bumper and the carrier! I am deciding between the xrc and this one. Whats the wheels brand / make?
@CarlosRivera-oe1zr
8 жыл бұрын
feet women
I have a 2000 Chevy Blazer and I'm trying to find a tire carrier similar to this-does anyone have any suggestions?
Where did you find that f Farm jack? I looked for a gold one to match my truck
When I was in the Army years ago, we used to pack wheel bearings by taking a large glob of grease; then holding the new bearing in one hand, force the clean bearing into the grease, while moving it around in a circle. Then once you finished you would wipe off the extra grease, or just push the greased bearing into the wheel......
How much are your muffler bearings?
I need this for my zj!!!
How do you not have a 3/4" ratchet??
Do they make this anymore? I cant seem to find it anywhere.
Hey matt do you know if they still over this bumper set up i dont see it on their site i really want this rear bumper
Very cool.
Very nice
I did use a pitman arm puller and still won't budge
Where can I find this setup do they sale this anymore?
No matter how hard I try I can find this type of bumper set. Can I please get a response as to where to find this bumper set!?!?
14:00 take out the air. It's gonne be lighter 😂
@1991zakman
4 жыл бұрын
add some helium
I want an xj now
Good morning they ship the products to Perú?
Where can i get that bumber ???
Does that only works for jeeps?does anyone knows??thaks.
What color is that XJ. I did that.
very good!
Does the rear even still open up with that installed? Must weigh a ton
🇪🇸 donde se puede comprar ese porta ruedas de recambio 👌👍
That looks awesome, shit load of weight on the rear suspension though, combined with that rear bar
I was waiting on you to put the spare on a jack to get it up to the carrier.
Do they still make this tire carrier? They have a vanguard bumper but I dont see the carrier.
Maybe they'll smarten up and make the carrier out of aluminum light and strong
I enjoyed this video, I like build videos in general, but I have a question: What happens if you get a flat tire when you're out in the boonies? Getting the spare off the carrier isn't too much of a problem if you're careful, but how do you get the flat tire back onto the carrier? Do they make a small winch for it? We aren't all muscle men.
@SuperDad1776
Жыл бұрын
Use a ratchet strap off your roof rack rails to lift it up or run a board to the bumper roll it up an pivot onto the mount but honestly just don’t go out alone would be best practice
Link to bumper and rack?
Sweet, bro
Hey! Question for you, do you still own this bumper and tire carrier? I have the same one but for my 03 TJ. I have all of the accessory parts except for the rotopax mounts. Unfortunately, JCR discontinued the bumper/tire carrier and the accessory parts. I have reached out and they said they wouldn't be able to help. I am wondering if you are able to take some measurements for me so that I can have a set fabricated. Unless of course you are willing to sell them! Let me know! Thanks!
How much total for bumper and the carrier? I know depends on vehicle. Mine is 1991 Ford Bronco XLT..
good vid brochacho
very good
Nice xj. What kind of wheels are those?
@bleepinjeep
7 жыл бұрын
kzread.info/dash/bejne/pZWumdByqMKrkpc.html
How do you open the back door?