I love how the world's smallest ride on mower is on the heavy duty channel

@SKC640

3 жыл бұрын

You should check out a ride king they made the from the 60s to the early 2000s it's 28 to 30 inch deck and is three wheel drive one wheel in the front which is attached to the steering wheel and it's also the drive wheel driven by a single chain so it's technically a zero turn and it's a vertical shaft just like a push mower and the engine is basically in between your legs and you sit one it at the same time! They are actually awesome for the 50 years they made them they pretty much never changed designs too I actually own one for my lawn mowing business the last year they ever made them and it basically replaces the push mower and any reason I need one since they turn so tight and take up the same space on my trailer too! I can use it in smaller areas than a push mower even and I can get it inside fenced off yards with tiny gates! Best 900 bucks I ever spent

@jerrysoutherland662

3 жыл бұрын

ATF also works good repairing flat tires on riding mowers.

@Porty1119

3 жыл бұрын

@@SKC640 It's like a Young Buggy with a mower deck!

"I'm a dentist, and a nurse, and a doctor, and a mechanic, and a plumber, and an electrician..." Don't forget "KZreadr". haha

@peterdang9475

3 жыл бұрын

Johnny sins ain’t got nothing on him

@vanilakung7563

3 жыл бұрын

Nothing counts as expert besides KZreadr

@BobPegram

2 жыл бұрын

Well, when he was dating her, he probably wasn't a KZreadr. Otherwise she would have been a groupie, nurse! "Oh, you're Filthy Rich?"

DeBoss used to play a carburetor in the high school marching band. He was quite good at it

Who else works on everything from rock trucks to excavator, but is watching the smallest lawn mower get a carb clean

@DGHD

3 жыл бұрын

Appreciate the views guys. Hopefully this helps a new homeowner that just got their first "tractor" (Aaron)

@mikeznel6048

3 жыл бұрын

Same. Fix everything and everything, plc, hydraulics, pneumatics. But fixing is fixing!

@OnlyTheEd

3 жыл бұрын

letsdig18 needs to add his "2 cents worth" in here..... :-)

@FLYWHEELPRIME

3 жыл бұрын

I think most people that watch this channel are the extreme end of the industrial gearhead mechanic type. I still watch stuff like this though because guys like Rich always bring something to the table that I've never seen before. I had no clue they make mowers with the mower deck guard interlocked. If you ain't filthy, you ain't rich If you're not learning, you're falling behind

@ZekeGraal

3 жыл бұрын

I work everything from small diesel all the way to airliners, and I'm still here watching Rich, because Rich is great haha.

14:03 it's flammable and dangerous says the man who built a Cummins powered flame thrower 😆

@OnlyTheEd

3 жыл бұрын

😆

@Cars.or.Cardioversion

3 жыл бұрын

It's like that meme where the teacher says something and all the students are staring back at one student. Only the student in this case is Peg aka @Ziptiesnbiasplies.

I know at the beginning of this video he says this is basically a "throw-away mower", but it's currently selling for $1899 at Home Depot, $2200.00 at Walmart and $2350 at Lowes.....too valuable to not take good care of and properly maintain. I need mine to LAST, so I'll be saving this vid to my Favorites. It's a great, comprehensive troubleshooting and maintenance video for the Troy-Bilt TR30-R!

I have a Troy Bilt 30" tractor that wouldnt start soon after I added gas. Changed the spark plus, removed the gas, added non ethenol gas, tried using starting fluid several times and it still wouldnt start. I don't have a trailer to take the tractor to my repair guy so I kept trying and found this video covered the air intake and it started for a few seconds and stopped, tried it a few more times with a piece of cardboard and lo and behold it started and ran for several minutes, halleluhia. With all of the videos I had previously watched to repair my other mowers, snow throwers and otherproblem with my tractor I have never seen (or didn't pay attention to) this tip. Thanks for all the good information. Keep up the good work.

I don’t know why I’m here. I know how a carburetor works and I know how to fix lawnmowers. I actually should be fixing a free whipper snipper that was given to me right now, but yet here I am watching rich work on a lawnmower. 😂 we often times will dip our carbs in Chem-dip. It works good at getting crud off.

Keep making videos like this. I have stopped watching a lot of other channels because they are beyond reality. You still see your viewers as people and not as dollar signs.

I got the same mower for free!! Found on the side of the road in the garbage. The same switch got me too! A carb and battery got it running

Heavy duty content if youre a cameraman :-P Gah, i suppose it cant all be terragators and v16 detroits

@sebastienbolle5539

3 жыл бұрын

IIRC the distinction they laid out was that DGHD was for off-road stuff, so here we are

@BobPegram

2 жыл бұрын

Anything that isn't a car or a pickup truck. After all, he does work on big trucks (on road) on DGHD.

@BobPegram

2 жыл бұрын

Besides, it was the cameraman/editor's non-running mower!

I sincerely appreciate this video. I don’t have a dad or dad type people in my life, and I really needed an in-depth explanation of this specific mower to make sure I am servicing it properly. You made this totally possible for me. Thank you.

also adjust the valves OHV engines need the valves adjusted about once a year

Fixed many non running small engines by just cleaning the carb. Good video!

Really like the wash trick with the vicegrips that will come on handy. Great simple video with some handy troubleshooting.

I have an old couch in the garage I thought about adding an engine to and making it a lawn mower, road grater, and a snow plow. While keeping it looking like a stock couch and coffee table.

Buy new gaskets? Nah get me a cereal box, some grease and my Buck knife.

Everything wrong with a Briggs and Stratton 5 hp engine

@AlienX511

3 жыл бұрын

Actually it was 10or 12hp engine...

@jarod10091998

3 жыл бұрын

And it's a China engine made for MTD not a Briggs

@throttlebottle5906

3 жыл бұрын

#1 issue is always the operator :))

The only complicated part of this mower is the 5 safety interlock switches, SEAT, PTO, REVERSE, BRAKE, and DISCHARGE COVER. The BRAKE and the PTO can prevent the mower from cranking, the SEAT, REVERSE, and DISCHARGE COVER will kill the mower ignition. If the mower won't crank it's probably because the brake isn't depressed the blade is engaged, or one the two switches in not engaged or bad. If it cranks buy won't start it's probably because it's in reverse, the discharge cover is displaced, your not on the seat, or one of these 3 switches is bad or not engaged.

Amazing video. This is what instructional videos should all be. Walked me through each and every possible problem until I hit on the stuck carburetor solenoid. Saved me hundreds from having to have the mower picked up and serviced - in two weeks. Up and running today! Thank you.

Thanks man for this valuable video. Been mowing my half acre lot for eight years with a TB30. No issues but replace the battery every four years, and change the oil and blade, and grease the steering every year. The mower was a good investment for me.

Loved every minute of this! Takes me back to when I was a kid and my dad teaching me how engine's work and the simple things to check when they don't work.

That solinoid is a "back fire prevention". Stops fuel from flowing into the engine. Typically seen on motors that run wide open all the time.

@dmc2554

3 жыл бұрын

Like beetles and their Solex carbs...

@pfun41

3 жыл бұрын

They started showing up on OHV engines. Most old flatheads didn't seem to have that issue.

@carsonhammond6204

3 жыл бұрын

Please explain more, I don’t think I’ve ever heard of this issue. I mostly mess with old flathead Wisconsin engines with updraft style carbs and diesels.

@pfun41

3 жыл бұрын

@@carsonhammond6204 The engine is stopped by grounding the coil and killing spark, it worked fine on flatheads, but on OHV engines fuel would be drawn into the cylinder and pushed out into the exhaust while the engine coasted to a stop. It would combust creating a backfire. so they put the anti afterfire solenoids on to shut off fuel flow when the key is turned off. The solenoids are usually found on any OHV riding mower engine, wether single or V-twin. For the most part you don't see them on smaller engines,

@ionstorm66

3 жыл бұрын

@@pfun41 when they fail you just bend the needle over and shove it into the solenoid. Then every time you shut it down you get a backfire so loud it pisses the neighbors off lol.

Finally got my TroyBilt 30B running... THANK YOU ! I have subscribed to your excellent channel.

So glad that I found this video. I have the identical lawn mower. I learned so much about how to trouble shoot the mower with this video. Thanks a bunch!

I own a troybilt tb30r, (Basically same mower) . I had same problem and this video gets a 5 of 5 stars for me because it's very mindful and thorough. The only negative was my manual advises against pressure washing. Other than that, He got my mower running. Thanks !

Here we go this one’s gonna be a hit lol The average suburban homeowner is known to have a complete and total meltdown if their lawnmower won’t start and their grass gets over 3 inches tall. Actually I believe to the average homeowner that there is truly nothing in the world scarier than not being able to mow their lawn on time 😂

@1MarkKeller

2 жыл бұрын

HOAs are sometimes the worst when it comes to personal lawn care.

"It's hard to find the battery if it isn't with the machine." -Deboss Garage 2021

I did spend a month total of my life watching Mustie1 videos, yet halfway through this one, I learned twice as much. Thank you, Rich!

Thanks I'm getting my mower fixed now. My adult daughter and I have gone through all of your steps. We are replacing the carberator now.

You need to reclean that carb. Idle circuit is still dirty. That's why at low speed engine is 'hunting ' for fuel.

Safety around gas is not taken serious enough on some of the small engine repairs for beginners in engine fuel repairs. Thank you!

Know the difference between a doctor and a diesel mechanic? One washes his hands before he pees, the other does it after...

Thumbs up! I'm getting one of these (Craftsman branded) ride mowers this year and thankfully stumbled on this video while watching review vids. I will now keep my eye out for these mowers that won't start to see if I can fix them.

In the winter, use the mower battery in the snow blower to keep it charged. That way you only have to buy one battery, and you keep it running longer.

It's odd yet heartwarming watching you work on something so small

So when are planning to put the turbo charger on it and give it a p pump injection system 😂🤣😁😂🤣😂🤣😂🤯✌👍🏻🙊🤭🍀

Thanks a bunch!!!!! You helped a guy who knows nothing about small engines and got me to clean a carb and get the damn TB30 going again. Greatly appreciate it!!!! To the EX GF. Suck it!!!! He’s a great doctor!!

Thanks for staying up late to get the job done and showing us all 'how to' the right way 👍 Much respect 😎👏🔥

Negative pressure, exactly the correct thing to say. Thankyou for the great content. Melbourne Australia 🇦🇺

What a great video for someone who is new to working on small engines! Great work!

State side the majority of the pump fuel has 10% Ethanol, that can mess up the small seasonal engines too. What I have discovered thanks to a friend from where I retired, he said I should be using what is called Marine/RV fuel. It is what has been called pure gas, as in NO Ethanol. Ever since I have been using it I haven't been draining the gas out of the tanks of my snow blower or lawn mower. I'll fill it up the last time I use it for the season and in the last at least 8 to 10 years have not had one issue getting the engine started at the beginning of the next season. Yes it is more expensive but for the average home owner, it is well worth it.

Fixed my TB30 (2.5 years in storage) today (same exact problem) using this video. Many thanks for posting this!

Frig I've learned so much about mechanicing from this man. thank you!

A video for the rest of us lol. Always something to learn whether it’s a Terragator or a tiny little MTD, keep it up guys.

My neighbor decided to throw out a Troy-Bilt Self Propelled Lawn Mower. They just left it by the side of the road. I took it and decided to see what I could do with it. After an oil change and cleaning out the carburetor, it came to life. Although, we may try to sell it online due to the fact that we already have a riding lawn mower.

The choke lever, grab the flat bar it hooks to on the governor/cable arrangement with some pliers and twist-tweak it 45deg to unhook that end. No risk of snapping plastic bit on carb that way.

Excellent video. So if your a doctor, nurse i guess the bed pan is the oil pan? The heart is a fuel pump the tires are the feet and the headlights are the eyes. So what equates to the battery i think i need to charge mine is running a little low.

The solenoid on the bottom of the carburetor is an anti-backfire solenoid. Another thing that scares the average homeowner is the sound of backfiring lol. When you shut the key off the solenoid gets pushed closed by the spring inside, and it covers up the main jet stopping the Venturi affect preventing gas vapor from entering the combustion chamber and potentially open exhaust valve causing a scary backfire

I am never drinking beer with you Rich, Odear you made me crack up "if you have buddy drinking beer get him to hold the spark plug while you crank it over" lol

Hey Rich, great video. One thing I would add to the spring maintenance routine would be to pop the flywheel cover off and make sure there isn't a mouse nest sitting on top of the cylinder. That's a 5 minute job that could save an engine, or at least a head gasket.

I’ve also worked on mowers and I’ve learned that blowing air through the fuel inlet can blow out a little tiny rubber gasket inside for the needle. I’ve learned to blow air from the inside like he did in the video. If you blow it the other way like where the fuel line goes it can blow out the gasket and the needle will never seat and then you will have a flooding issue.

Great video to use if youve just picked up a second hand mower which hasnt been running! Excellent explanation and debug guide - thanks!

This video was a huge help! Thanks!

It needs a cummins swap.

Just bought a brand new one of these and watched this to learn about it. Very interesting and helpful, thank you.

Thanks for the great information. I was able to fix my mower, your video was spot on, my little solenoid valve was plugged with gunk!

I've had the same model mower for 3 years, its treated me well. I drain the tank and run it dry every Fall. As to ethanol, Canada wide Shell 91 and Canadian Tire 91 are ethanol free, as is Costco 91 in Ontario.

I’ve never had a nurse blow me to check anything… I need to find that hospital!🤣

Your video allowed me to fix my rider myself and it was easy. Thanks so much!!

So agree with your nurse explanation. As mechanics do all the trades, with the most about tools needed to buy and least pay and respect. Thanks for the great job.

I am a heavy duty diesel tech and I’ve never worked on a lawn mower or anything small engine in my life, never opened up a carb either but I still enjoy this content.

Hi there ,from Sydney Australia.I got a Rover micro rider sitting in the shed for the last 2 yrs.Had it out today to do the job,tried add fuel in to air intake,it’s run and stop as it burn all the fuel,though no fuel was coming across from fuel tank.I’ll now try and work on floater .Thanks for vid

I like the two washers and vicegrip hose clamp. Learn something every day. Thanks Rich, best regards from Indiana, USA.

@throttlebottle5906

3 жыл бұрын

take a cheap/worn out pair and weld washers onto them permanently, you can even grind the teeth away/angle and weld washers on to make it pinch off evenly.

These is a great video for people to learn alot from! I just picked up a nice almost perfect condition older simplicity mower with the awesome 12.5 Brigs engine for $12.50 and I barley had to do anything bro get it going the battery was still good and I found out the person before me cleaned the carb but somehow managed to put it on backwards so the only thing I had to do was put it back on the right way and out a new belt on the deck one I even had laying around and it's been a absolutely perfect running lawn mower for under $13 bucks!

You just saved me! The attachment was not pushing on that button by the chopper so the “circuit” was not closed. Thank you!

Two words Excellent description. Thanks and subscribed

A very quick tip to ensure gasoline delivery is the issue. Pull air filter. Grab an un-lit propane small hand torch. Turn on propane gas valve. Insert unlit torch tip it into air intake into carb while cranking engine over. Engine will start and run on propane. Then you know your issues are gasoline supply related. Great video. Well done. You speak well. You know what you are talking about.

Thanks for this video explanation. Everything you said was spot on and yes the craftsman r110 that I have IS identical to the troybuilt.the tip about not getting the cheap belts was really helpful too.and being that I had the cutting deck off I took a wire wheel to it,painted it,greased it and figured being that I have the deck off I'll replace the deck belt too.then I figured why stop now?took the steering housing off,followed the tip about preventing the steering from slipping in one of your other videos.thank you very much for the very valuable information.i now am a subscriber

Fascinatingly informative video, many thanks for producing it for the channel! 👍

Thanks mate that was very helpful I have just been given the same mower and had to replace the carburetor with a new one after seeing your video. Thanks again Gordon perth western Australia

i like the way the jet just unscrewed and the pin for the float wasn't rusted in.. i've seen some push mowers you'd take the bowl off then just order a new carb after looking inside..crusty stale fuel turned into a new form of cement

Terrific video, super explanations and problem solving, cheers from downunder!

I'm stoked filthy Rich puts out mower vids! Deboss videos are dope and worth discovering. I work for a landscaping company and we run walker mowers, I was searching random walker videos and found the deboss channel. Since, I've gained a ton of interest in diesel engines. A whole new sparked interest for me. A mower vid was my way in. :) Make videos about everything you know Rich! I'll watch that shit.

@dmc2554

3 жыл бұрын

You mean "un-sparked" (because, like, diesels aint got no sparks....) CHEERS!

@jerediswatching6563

3 жыл бұрын

@@dmc2554 yeah! Lol your definitely right on there. That was a poor choice of words on my part. :)

Learned a lot thank you and God bless!!

What a great video and a great explanation of how a carburetor works. Awesome.

I could NOT be happier…inherited a Columbia/troybilt, ran it for 5 years, and then…..put bad ethanol gas into it….it would start, catch, and died…followed the steps, and then did something I had never done before. Removed, disassembled, and cleaned the carburetor-and then reinstalled it. This excellent video guided me through the process and I spent NOT ONE PENNY to someone else to remedy my situation. I figure this site saved me $150 and I am so Grateful!

Verymuch thanks for sharing now my mower runs .a video worth saving well done ✌ be with you always.

I run the same lawn tractor as a snow plow all winter so that I never have a problem with stale fuel, I've put almost 800 hours on it in 9 years.

Finally some small engine tech stuff!!! Right on!!!

Thanks for the vid, very straightforward. Having this exact issue on the similar small CubCadet CC30, turns over, fuel clean, clean filter, spark....on to carb - wish me luck!

@whereisthedollar

10 ай бұрын

Me too. Mine (CubCadet CC30) is 2+ years old. No more 10% ethanol gas. Going to Ethanol free tru fuel and found a station with Ethanol free . Used Sea foam to help clean it out and a few drops of sta-bil 360 in the gas can. Hope this works. How did you make out.

@CoreyDodge

10 ай бұрын

@@whereisthedollar ended up taking carb off like how he did in the vid, and cleaning it completely as the fuel bowl was stuck similar to 18:28 in the vid and the solenoid was gunked right up too. Worked like magic after.

@whereisthedollar

10 ай бұрын

Great. I just diagnosed mine as a clogged fuel filter and ordered a couple from CC online. Will change out and no more 10 e, period will be used.@@CoreyDodge

Even though knew what was going on still a pleasure to watch you work!

Awesome video! I was able to fix my craftman r1000 after watching your video. You're the man! Thanks a bunch!

I was messing with this thing for three hours. Damn cover switch was the one. OUTSTANDING video. Thanks guys!

My grandmother has one of these and over the last couple years I've been having to mow for her. They work pretty good for what they are it definitely has its pros/cons though. I find its a weird seating position for myself and the F....N....R shifter is an awkward spot. But you get what you pay for. Its definitely not like a regular ride on but for the price it beats using a push mower on big yards !

That’s some fine teamwork with close ups and wrenching

have the same mower...that deck switch threw me for a bit til I found the lil bastard

Outstanding Video and Instructions!!! Thanks. Gary from Ga.

More common on these new mowers is the crankcase vacuum operated fuel pumps. They diaphragms go and the gaskets or hoses that connect them to the crank case. I think that one is a gravity feed though. Don't see that often. Those electric fuel shut offs are supposed to eliminate backfires in the muffler after the mower is turned off.

I've had trouble after sitting all winter with mower not starting, I added a fuel primer bulb that helps a lot. I also added a wire basket tie wrapped behind the seat for trash I find a my lawn

When I have trouble getting mine to turnover the first mow of spring, I just clean the spark plug, spray some starting fluid in the spark plug hole, put the spark plug back in, and turn the key. It's started every year that way for as long as I've had it.

great video you explained it very simply

Outstanding presentation! So, you are a Jack Of All Trades and Master of most. It shows. My two sons gave me a well used Craftsmen RER1000 that wouldn't start yet it was running perfectly an hour earlier. You guessed it -- they bumped the discharge shroud in transport and the safety switch went open. It took 30 seconds to fix, yet 10 minutes to track down and isolate the misbehaving switch. I use 91 octane non ethanol gasoline only in all our cars and gas powered machines. And through your entire video I never once heard you say "eh" in a classic Canadian brogue. We yanks love that. Eh?

Instead of destroying the linkage you could simply remove the governor linkage and remove the carb easily.

Thank You! We love the methodology.

this guy is awesome and funny. Love the beer references. Old gas looks like a great IPA.

Awesome video on diagnostic techniques on getting a lawnmower running.

This was really helpful to me on my riding lawn mower

I remember, in my youth, drawing (poorly) pictures of how stuff came apart, so I could put it back together.

Best repair Video for those type of mowers. I did same for my Wolf Scooter Pro.