In this video we replace the deck belt on a craftsman/troybuilt 30" rear engine riding mower. R110/TB30
Жүктеу.....
Пікірлер: 208
@D-MAN1072 жыл бұрын
Thank you all for the awesome support I hope this video helps someone out👍🔧
@ajalberter9452
4 ай бұрын
What is the size of the belt?
@greglewis5880Ай бұрын
Thanks, this was the best video online. I was able to successfully change the drive belt and my mower is running like new!
@D-MAN107
Ай бұрын
Glad it helped
@WilliamJohnson-xp7td Жыл бұрын
I just want to say THANK YOU!! My belt was shot ran across this, watched a couple of times and I was able to change my belt just by looking at this video.. Great clear instructions...Will be subscribing.. Again Awesome job and thank you!!!
@D-MAN107
Жыл бұрын
Thanks
@boehning Жыл бұрын
Great video! Helped me out with a snapped idler rod on my mower. I wasn't sure how it was supposed to be installed and this was perfect.
@D-MAN107
Жыл бұрын
Glad it helped!
@user-yh1fz8ii5v Жыл бұрын
I broke and replaced the blade belt last year and it broke already. Wayched this video, saw what I did wrong and installed the new one in less time than before. Thanks for the help.
@D-MAN107
Жыл бұрын
Glad it helped
@sydschultzn.c.68033 ай бұрын
The video has great detail except in the beginning should show us how to remove the pen and the cable removed from the bracket. The whole video did help me. Thank you so much Schultz II
@D-MAN107
3 ай бұрын
Noted
@kristopherbell7158 Жыл бұрын
Man i had to replace all the belts on mone about a year ago, i learned as i went wish i had this vid!
@hellenruiz4497 Жыл бұрын
That's the belt for the blades. What about the drive belts?
@Jaybird-oo3ih Жыл бұрын
Great informative video, I’d love to see one on the drive also looks a bit more complicated.
@D-MAN107
Жыл бұрын
Noted!
@charlesmarion2032 Жыл бұрын
Awesome camera work and explanation
@D-MAN107
Жыл бұрын
Thanks a lot!
@ZwithTheCutlass Жыл бұрын
Man I needed this video, thanks!!
@jimmulgrew364410 ай бұрын
Thanks very much for the video. Saved me a lot of time and money.
@D-MAN107
8 ай бұрын
Glad it helped
@lindaedwards19458 ай бұрын
Great teaching tool! Thank you!!!!
@D-MAN107
8 ай бұрын
You're very welcome!
@TTSOGRETRON25 күн бұрын
Thank you, exactly what I needed to know!!
@D-MAN107
12 күн бұрын
Glad it was helpful!
@randyjones4239Ай бұрын
Great video it was very helpful! Thank you!
@D-MAN107
Ай бұрын
Thanks
@frankbiddle7749 Жыл бұрын
Thanks that was a big help
@martinperez6187 Жыл бұрын
video saved my ass today thanks I appreciate it
@D-MAN107
Жыл бұрын
Awesome
@DoucementDoggy3 ай бұрын
This video made it so easy
@D-MAN107
3 ай бұрын
Awesome
@andersonwilliam83009 ай бұрын
Awesome video
@D-MAN107
8 ай бұрын
Thanks!
@jackzuranski852 Жыл бұрын
Thanks great video
@D-MAN107
Жыл бұрын
Glad it was helpful!
@paulmysliborski4832Ай бұрын
Great vid. Only thing I would add is to put a dab of anti-seize compound on the belt keeper bolt threads.........
@rexclay22316 күн бұрын
nice and easy $60 job , thanks
@MarcosLopez-cu6ui2 ай бұрын
Gracias hombre🤜🤛
@codyw812711 ай бұрын
Have the same mower. Recently the thing has really lost power. I have replaced, upper trans belt, deck belt, fuel filter, air filter, cleaned the carb. New blade. Any insight on where my loss of power could be coming from? 6th gear feels like 2nd.
@nanscott3092 Жыл бұрын
Helpful. Thxs.
@robertmcmahon2744Ай бұрын
Great video. Other videos have you take off the deck, not needed here. Also, you took off the belt cover and keeped it off to put the belt around the engine pulley FIRST , then around the blade pulley, putting the cover AFTER that. Other videos showed putting the belt around the blade pulley, putting on the belt cover, then struggling to put the belt around the engine pully. Your way gives way more space and room to do belt replacement quickly and easily. Thanks. As with other video creators that I learn useful stuff from, I'm sending a few $$ your way by using the "Thanks$" button above. I hope others will do as well to help you bring more useful content in the future. Peace out and God Bless.😎✌🖖🙏🤝
@D-MAN107
Ай бұрын
Glad it helped
@WALLY065Ай бұрын
Thank you,, Would like to see a vid on replacing or servicing the blade spindle.
@D-MAN107
Ай бұрын
Noted!
@matthewcaldwell4254 Жыл бұрын
Thanks for the help! Got my mower fixed. Question for you. I had to add a manual valve to my gas line going to the carburetor. Is there a better was to prevent the gas from getting into the oil when the mower is just sitting? The valve works fine, just seems weird I had to add something that wasn’t from the manufacturer.
@D-MAN107
Жыл бұрын
Your carburetor needs replaced its leaking from the needle seat. Fuel valve is a bandaid for the actual problem but will work if you remember to turn it off every time.
@JonFox714 күн бұрын
Thanks for this, It helped me see how I will be inspecting the belts and pulleys. My system stalls as soon as I lower the blade. Had a bent blade so I replaced it but it still stalls when lowering. I by-passed the switch with snap tie and the blade worked fine and the engine stayed on, it is only when utilizing the switch as intended, it stalls. I wonder why it is doing that?
@D-MAN107
12 күн бұрын
Glad it helped
@johnanddawnbuelow2014 Жыл бұрын
How do you get spring back on?
@worddunlap Жыл бұрын
Thanks.
@belibalasfc Жыл бұрын
Hello! Would you be able to help me, I removed the Bracket Asm Brake a few days ago to replace another part of my mower. Now I can’t figure out how to put the bracket asm brake back on ? For my craftsman R1000 mower
@tommyhill789411 ай бұрын
I was doing this the other day and a long spring popped off. It looks like it came off of the brake rod. I think it's the brake rod extension spring but I can't figure out where to put it back. Anyway you could help?
@rafaeldiazus Жыл бұрын
Very good instructions. How many belts does that particular mower have and type?
@D-MAN107
Жыл бұрын
Thanks, just a deck belt and drive belt.
@chrisfrank84133 ай бұрын
Thank you so much.
@D-MAN107
3 ай бұрын
No worries!
@eeepeeep520610 ай бұрын
I had to replace my lower drive belt on craftsman R110. The new belt came as a 35" instead of 35.25". Now it does not totally disengage when in netural. It tries to pull a little. HOW do I adjust this clutch issue? Thanks
@davemoss1188 Жыл бұрын
Thanks for the video please yo a drive belt one because that seems to be a lot trickier including as best as I can tell removeimg the deck belt first.
@D-MAN107
Жыл бұрын
Great suggestion!
@JohnZacharuk Жыл бұрын
Great video. I have a problem with the gear speed selector on my mower. After engaging the brake and releasing it the speed selector drops back to first gear all the time. Any suggestions? Thanks.
@D-MAN107
Жыл бұрын
Probably has a worn selector
@glennfields812123 күн бұрын
Thank you so much for taking the time to make this comprehensive video repair. I always wondered how I might lift my mower to do this job myself and now I have a good idea. Very smart using a chain lift and lifting the rear of the mower where most of the weight is. How did you get it up on that work bench table?
@D-MAN107
12 күн бұрын
Glad to help
@michaelg81504 Жыл бұрын
What is the lenght or part number of the new belt? Looking on the internet it seems to be a mystery. Thanks
@joedaniels9542Ай бұрын
On the blade pulley does the belt go behind the break
@user-wl8gp5yk4l14 күн бұрын
What is the part number of the new belt you installed? The parts websites are giving me different numbers. Thank you
@1972faouzi Жыл бұрын
Thanks Much!!
@D-MAN107
Жыл бұрын
You're welcome!
@curtisrogers2910 Жыл бұрын
What about removing the whole deck shell? That video would be 🔥
@robertmays37793 ай бұрын
What size is the belt
@bail10k44
2 ай бұрын
its a 954-05001 belt
@7202ford
Ай бұрын
43.5x 1/2
@ajwilliams33 Жыл бұрын
Do you have the model number of the belt. I thought i did but the belt came too small. I have the r1000 as well and need roo chasms this exact belt.
@ericblair2197 Жыл бұрын
Great video!! Consider a 3M Ryman notched belt & HD dressing ( I know, but a little dab' lol do ya? Quiet, smooth & lasts & lasts. Since 1994 on my 90 , 2 belts & lathe center lube on the bearings & engagement! 😉😀 , Working on the CLU-BRAKE0 ADJUST " to keep the front wheels down & my teeth fillings in? Any idea's 🙏 you've tried? Updated fuel to filters, "T" connectors & a dump valve ( Amazon kit) braided line & I can dump that " moonshine fuel & water" stabill it & go another year? That $23.00 a gallon can gas is obscene ( purt pumps are 70 miles a way & my friend at the airport retired , so no 135 pure octane to mix for a while. ( Got some at EAA this year 4 next but then : BIDUMB corrosives? Yet still a good tube👍
@davegillen8437 Жыл бұрын
how do you adjust the height of the mower blades , mine are too low, is there an adjusting screw ? Great Vid !!
@D-MAN107
Жыл бұрын
I that mower there is not much adjustment unfortunately.
@waltwhite1646 Жыл бұрын
Great video ! I have a 5 yr old Troy bit 30 R and will use this if my belt is shot ! ... need help or video on how to grease front wheels which have fittings but for some reason won't let a small grease gun let grease go in ??? Thanx
@D-MAN107
Жыл бұрын
The fittings are probably clogged with dirt
@TheTigolebitties69
9 ай бұрын
They are not actually grease fittings. They are just solid plastic knobs that look like grease fittings. I did the same thing a while back but after installing 2 new tires found them not to be zerk fittings at all.
@soypinoy5251 Жыл бұрын
can u make a video on how to replace a drive belt pls
@jaxdrummer25 Жыл бұрын
I have the same mower... I recently ran into the problem where the engine dies when I engage the blades. It deos die immediatly. It will slowly putter for minutes before it either revs up and gfoes or just sputters out and dies. Once it dies I cannot start it again. Usually it will take a day before I can get it to start and when it does white smoke goes out of the exhaust. Its not the safety switch as I already had that. Any idea what that might be? I would like to know where to start looking on my own.
@D-MAN107
Жыл бұрын
Sounds like leaking fuel in the oil. Check oil see if smells like fuel.
@chadwaddell1212 ай бұрын
any way you could tell us how you jacked up the rear end to do this? I don't have a pulley or anything - just curious of a way to get it in the position you did for this video. great information btw- thanks for sharing.
@D-MAN107
Ай бұрын
I use a electric winch hanging from my ceiling. But anything can work or even a engine picker
@danaray-dw7ch Жыл бұрын
I got the pin off, but my deck won't drop. I can't pull it towards me enough to get it over the "arm" it rests on. ??
@RichWontor Жыл бұрын
my question is how can you raise/lower the cutting deck? Searches don't give me any help. My mower is set on the highest setting "level 5" but is still too close cutting, and setting 4 willl scalp and bog down the engine. I could use a 6 and 7 ! It seems the only adjustment is a hex nut facing forward to slightly raise the front of the deck. Any help out there?
@D-MAN107
Жыл бұрын
Not much adjustment on these mowers they are built very cheap
@Sky-rq1jk Жыл бұрын
I have a 30 inch R110/TB30 like in this video. My problem is the DRIVE BELT broke. I can't seem to find a video or detailed instructions on how to replace this belt. Any suggestions?
@D-MAN107
Жыл бұрын
I will post one on the next job that comes in
@roybray8741 Жыл бұрын
My belt slip some when grass is tall does it need tighten or new belt u think
@D-MAN107
Жыл бұрын
New belt not adjustable
@robertmcmahon2744Ай бұрын
Thanks!
@D-MAN107
Ай бұрын
Thanks!
@pshclass6 ай бұрын
I bought mine at a garage sale what is the part number for the belt and what's the part number for the blade on The rer 1000 30 inch deck mower
@1buckola4 ай бұрын
I have an MTD 30" rear engine mower. how does the forward reverse shifter knob come off?
@D-MAN107
3 ай бұрын
Pulls of or twist
@mikecunday8423 Жыл бұрын
Watch the torque on the 30 on the blades
@denisfeary94882 ай бұрын
Great video. Do you have on showing how to replace drive belts?
@JayMuzz-xn3rv
Ай бұрын
Lol same here
@JayMuzz-xn3rv
Ай бұрын
You find one
@rogerramirez61768 ай бұрын
Nice video. I got the same mower. My problem is with the brake for the blade. It doesn't move. Could use your experience and knowledge. The handle does not have any resistance when I engage the blade.
@D-MAN107
8 ай бұрын
Thanks for sharing sounds like the cable is broken for the blade engagement.
@rickybason9004 Жыл бұрын
I'm trying to replace the drive belts on the tb30r Troy Bilt riding mower. Do you have a video?
@D-MAN107
Жыл бұрын
Not currently but I'm sure we will
@jaybob1519 Жыл бұрын
I just purchased this mower. It was working great until it would no move forward. I found a part of the belt broke. Would that belt stop mower from moving?
@Official_VehS
Жыл бұрын
no the belt he is replacing runs the blade. there's a different belt that runs the diff that powers the lawnmower
@D-MAN107
Жыл бұрын
Probably has a broken or jumped drive belt under the engine
@duston1994 Жыл бұрын
I need a video on replacing the drive belts
@JayMuzz-xn3rv
Ай бұрын
Same
@chadwaddell121Ай бұрын
does this mower have just a deck belt or is there another belt? I only see what appears to be the deck belt but manual says there are 2 or 3 belts?? thanks for any feedback
@D-MAN107
Ай бұрын
It has a drive belt for transmission also
@renedanos88773 ай бұрын
What would cause the blade on a trobuilt tb30r to not disengage?
@D-MAN107
3 ай бұрын
Belt to tight wrong belt or cable is rusted or linkage is getting stuck.
@KathieMoore133 ай бұрын
Hi! Really enjoyed this video, a HUGE Thank You! But am stuck, have a troybilt tbr30, my first belt fly off, am replacing it on garage floor. I do not have the strength to lift the back end, can only lower the deck to the lowest position. ANY suggestions please, from anyone out there, to get this new belt on the front pulley? Yep, a girl tacklin' it herself! Thank you in advance.
@D-MAN107
3 ай бұрын
Good luck! It can be done on the floor like your trying.
@stevemalek35223 ай бұрын
My tr30r won't go forward or backwards it happened 2 weeks ago any suggestions or help would be appreciated...thank you!
@D-MAN107
2 ай бұрын
Drive belt is off or broken most likely
@efrainrivera1207 Жыл бұрын
How do I adjust the clutch on this 30 “ lawn tractor
@D-MAN107
Жыл бұрын
Not really any adjustments it's all in the belt. If belt is worn needs replaced.
@donaldbageant46472 ай бұрын
Great video, My gf son in law has one of these mowers, he broke the handle by the pully on the left side, what is that handle for?
@D-MAN107
2 ай бұрын
Helps keep the idler pulley in line
@user-hk1dz2bg1p Жыл бұрын
How to adjust the belt?
@terrykarrow21809 ай бұрын
Belt size?
@KB1UIFАй бұрын
Hi, I have the Craftsmam version of this mower, r1000, what is the correct socket size and direction of thread for the blade. Thank you.
@D-MAN107
Ай бұрын
15/16 socket regular threads lefty loose
@Paula-pu6yc Жыл бұрын
I have the same mower and it won’t move back or forth. What do you think is causing this?
@D-MAN107
Жыл бұрын
Drive belt or brake stuck
@dickwillett34814 күн бұрын
If possible could you show how to adjust Brake/Clutch pedal so it will lock in place.Mine wi8ll catch a little and then pop up.. Thank, Dick W.
@jedsamppy2 ай бұрын
Can't seem to get belt on 42 inch weedeater riding mower
@gregunigg7619Ай бұрын
What size belt is that ???
@raygoody4719 Жыл бұрын
Great Video. Do you have parts or brand name number for the belts you used?
@D-MAN107
Жыл бұрын
Yes
@gotman4409 Жыл бұрын
I have one of theses and the drive belt broke. I was told that it is a real pain to replace and that it was not worth repairing. So just how do you replace one ?
@D-MAN107
Жыл бұрын
It's not that bad really.
@jake0309832 ай бұрын
What’s that belt size. Online it says 43.5 x .5 but it’s to big
@paulzacher5672 Жыл бұрын
What is a broken spindle mount? Where is it exactly?
@D-MAN107
Жыл бұрын
It holds the blade and mounts to the deck
@whobeewhatee3 ай бұрын
That bolt that you called a "belt guide," I've lost it and can't find it for purchase anywhere using that description of "bolt guide." Any ideas to help me with the search? Thanks!
@D-MAN107
3 ай бұрын
Lawn mower shop can order one. If not contact us.
@whobeewhatee
3 ай бұрын
@@D-MAN107 alright, thank you
@williamstrayhorn2824 Жыл бұрын
How to remove the engine on a troy bult 30r in rear engine riding mower
@deborahdavis2239 Жыл бұрын
How did you get the mower up on the work table?
@D-MAN107
Жыл бұрын
Table goes up and down like a lift
@travisdavis1609
Жыл бұрын
What's the best/safest way to lift these mowers to change blades? Lift the rear, front or tilt to side?
@MrNiceGuy500 Жыл бұрын
I need to replace the drive belt on mine….heard it is a real pain
@D-MAN107
Жыл бұрын
It's not to bad but it's tight
@edward.billue518 Жыл бұрын
I have a Troy riding mower. I left it sitting for two years brand new or you all work and no return over but won’t start someone say I need to dump all the gas out and clean the carburetor. I don’t know can you help me
@D-MAN107
Жыл бұрын
Sounds like the carburetor needs cleaned and fuel system flushed.
@rm74221 күн бұрын
What is the size of the belt ?? Part #??
@patworthington3112 Жыл бұрын
Do you guys have a video on changing the Drive belts on the TB30? Thanks this video was great!
@D-MAN107
Жыл бұрын
Not yet
@StellingGDL
Жыл бұрын
@@D-MAN107 yes please do
@arturb46589 ай бұрын
My belt keeps coming off, would replacing it fix the issue? Thx
@D-MAN107
8 ай бұрын
Possible but may have other issues
@Aaron-yu9vp Жыл бұрын
I have this exact same mower, and it dies whenever I engage the blades. Runs perfectly fine when blades are off. Is this the belt I need to replace to fix that issue?
@D-MAN107
Жыл бұрын
Sounds like the safety switch on the side discharge check to make sure it's being pressed all the way.
@TSyoyo
11 ай бұрын
Did you ever figure out what the issue was? Mine doesnt die but it seems to bog the motor down and it shakes a bit. Runs perfect without the blade engaged though.
@chrislewis7579Ай бұрын
craftsman2 ride-n-mulch 30' cut need the drive belt size
@bryanrussell8770Ай бұрын
The video is helpful but what if the belt is broken and not routed properly, can you show us how to fix our mower when the belt is gone or completely shredded? I have issues that your video didn’t help me with. Like the black lever you say goes up in the frame, mine has a spring and I see the spring on the one you’re working on, my spring isn’t connected to anything and luckily I see yours is mounted under the arm so I’ll see if I can mount mine like I see in this video, but that lever is connected to a pulley and that is also connected to a black piece of metal that has a rubber guide that rides inside the pulley for the blade, when I route the new belt like I see you do in the video the belt contacts that guide and it damaged my new bell I installed myself without seeing any video of on you tube. I fix cars so I figure I can replace a mowers belt, but I didn’t see that guide and didn’t know it was shredding my new belt until it shredded it. I’m getting my new belt today from Amazon so hopefully I’ll be cutting grass again soon. But I sure wish the video would show what to do if the belts failed, not a preventive maintenance video.
@bryanrussell8770
Ай бұрын
Okay my belt just arrived and I installed it no problem and yes this video helped out greatly. I think my mistake on the first install was not making sure the spring the goes under black lever of the tensioner was installed correctly and it caused the tensioner pulley to be in a downward position and by that happening the belt was twisted and getting shredded. Thanks for the video. Now I need one that shows how to adjust the carburetor if there is any adjustments available.
@johnanddawnbuelow2014 Жыл бұрын
How do you get spring on
@D-MAN107
Жыл бұрын
Sometimes a rope to pull it with works well.
@rp-pk7hs Жыл бұрын
I still can't get the blade to engage. Where in the world does the Black on the Belt tightner go. I don't se a function for it but to pull down on the drive belt. Not very7 strong. I checked the PTO cable, iT IS TIGHT WHEN i LOCK IT DOWN. aNY HELO WOULD BE APPRICATED.
@D-MAN107
Жыл бұрын
Not sure what "black" your referring to?
@DougVermilyeaАй бұрын
Hi I purchased a used Craftsman 2012 RER1000 and my belt idler assembly looks different. It looks like I have to drop the pulley to get the belt out and that assembly is just floppy there is no spring tension and the bar you show with the black end is not attached 6:42 . Where can I find a parts list for this so I can purchase and get this installed correctly?
@D-MAN107
Ай бұрын
Partstree.com has good diagrams
@DougVermilyea
Ай бұрын
Thanks it looks like I need a missing spring on mine no bar. So once I get the spring then I need to figure out what it attaches to.
@VinnyeC10 ай бұрын
What size belt is used for this?
@phartusd67
2 ай бұрын
1/2" by 43" for the 30" deck models
@garlandfrost51083 ай бұрын
I can't get my deck to engage could the belt be stretched
@D-MAN107
3 ай бұрын
It's either off a pulley or could have broken cable
@Slevinlobell9 ай бұрын
Hey man, great vid. Subbed. Can you PLEASE help me, that little tensioner bar with the black like plastic end on it, the bar that is attached to the idler pulley, that somehow sheered off in half and I can't find the part anywhere or exact name of it. It's the chrome bar like 6 inches approx long with a 2 to 3 inch like black plastic/hard rubber end with 1 screw and thr very end of it bends in and sticks into the idler bracket, the black end sits against the mower I think. You know what I'm talking about I'm sure. I have to get this mower working asap, thanks a ton man!
@D-MAN107
8 ай бұрын
We can order one just call us at winderoutdoorpower
@Slevinlobell
8 ай бұрын
@@D-MAN107 will do. Prob needs the whole idler pulley assembly I'm guessing and not just thr bar. I can post a pic of the broken part on your social media if that helps too
Пікірлер: 208
Thank you all for the awesome support I hope this video helps someone out👍🔧
@ajalberter9452
4 ай бұрын
What is the size of the belt?
Thanks, this was the best video online. I was able to successfully change the drive belt and my mower is running like new!
@D-MAN107
Ай бұрын
Glad it helped
I just want to say THANK YOU!! My belt was shot ran across this, watched a couple of times and I was able to change my belt just by looking at this video.. Great clear instructions...Will be subscribing.. Again Awesome job and thank you!!!
@D-MAN107
Жыл бұрын
Thanks
Great video! Helped me out with a snapped idler rod on my mower. I wasn't sure how it was supposed to be installed and this was perfect.
@D-MAN107
Жыл бұрын
Glad it helped!
I broke and replaced the blade belt last year and it broke already. Wayched this video, saw what I did wrong and installed the new one in less time than before. Thanks for the help.
@D-MAN107
Жыл бұрын
Glad it helped
The video has great detail except in the beginning should show us how to remove the pen and the cable removed from the bracket. The whole video did help me. Thank you so much Schultz II
@D-MAN107
3 ай бұрын
Noted
Man i had to replace all the belts on mone about a year ago, i learned as i went wish i had this vid!
That's the belt for the blades. What about the drive belts?
Great informative video, I’d love to see one on the drive also looks a bit more complicated.
@D-MAN107
Жыл бұрын
Noted!
Awesome camera work and explanation
@D-MAN107
Жыл бұрын
Thanks a lot!
Man I needed this video, thanks!!
Thanks very much for the video. Saved me a lot of time and money.
@D-MAN107
8 ай бұрын
Glad it helped
Great teaching tool! Thank you!!!!
@D-MAN107
8 ай бұрын
You're very welcome!
Thank you, exactly what I needed to know!!
@D-MAN107
12 күн бұрын
Glad it was helpful!
Great video it was very helpful! Thank you!
@D-MAN107
Ай бұрын
Thanks
Thanks that was a big help
video saved my ass today thanks I appreciate it
@D-MAN107
Жыл бұрын
Awesome
This video made it so easy
@D-MAN107
3 ай бұрын
Awesome
Awesome video
@D-MAN107
8 ай бұрын
Thanks!
Thanks great video
@D-MAN107
Жыл бұрын
Glad it was helpful!
Great vid. Only thing I would add is to put a dab of anti-seize compound on the belt keeper bolt threads.........
nice and easy $60 job , thanks
Gracias hombre🤜🤛
Have the same mower. Recently the thing has really lost power. I have replaced, upper trans belt, deck belt, fuel filter, air filter, cleaned the carb. New blade. Any insight on where my loss of power could be coming from? 6th gear feels like 2nd.
Helpful. Thxs.
Great video. Other videos have you take off the deck, not needed here. Also, you took off the belt cover and keeped it off to put the belt around the engine pulley FIRST , then around the blade pulley, putting the cover AFTER that. Other videos showed putting the belt around the blade pulley, putting on the belt cover, then struggling to put the belt around the engine pully. Your way gives way more space and room to do belt replacement quickly and easily. Thanks. As with other video creators that I learn useful stuff from, I'm sending a few $$ your way by using the "Thanks$" button above. I hope others will do as well to help you bring more useful content in the future. Peace out and God Bless.😎✌🖖🙏🤝
@D-MAN107
Ай бұрын
Glad it helped
Thank you,, Would like to see a vid on replacing or servicing the blade spindle.
@D-MAN107
Ай бұрын
Noted!
Thanks for the help! Got my mower fixed. Question for you. I had to add a manual valve to my gas line going to the carburetor. Is there a better was to prevent the gas from getting into the oil when the mower is just sitting? The valve works fine, just seems weird I had to add something that wasn’t from the manufacturer.
@D-MAN107
Жыл бұрын
Your carburetor needs replaced its leaking from the needle seat. Fuel valve is a bandaid for the actual problem but will work if you remember to turn it off every time.
Thanks for this, It helped me see how I will be inspecting the belts and pulleys. My system stalls as soon as I lower the blade. Had a bent blade so I replaced it but it still stalls when lowering. I by-passed the switch with snap tie and the blade worked fine and the engine stayed on, it is only when utilizing the switch as intended, it stalls. I wonder why it is doing that?
@D-MAN107
12 күн бұрын
Glad it helped
How do you get spring back on?
Thanks.
Hello! Would you be able to help me, I removed the Bracket Asm Brake a few days ago to replace another part of my mower. Now I can’t figure out how to put the bracket asm brake back on ? For my craftsman R1000 mower
I was doing this the other day and a long spring popped off. It looks like it came off of the brake rod. I think it's the brake rod extension spring but I can't figure out where to put it back. Anyway you could help?
Very good instructions. How many belts does that particular mower have and type?
@D-MAN107
Жыл бұрын
Thanks, just a deck belt and drive belt.
Thank you so much.
@D-MAN107
3 ай бұрын
No worries!
I had to replace my lower drive belt on craftsman R110. The new belt came as a 35" instead of 35.25". Now it does not totally disengage when in netural. It tries to pull a little. HOW do I adjust this clutch issue? Thanks
Thanks for the video please yo a drive belt one because that seems to be a lot trickier including as best as I can tell removeimg the deck belt first.
@D-MAN107
Жыл бұрын
Great suggestion!
Great video. I have a problem with the gear speed selector on my mower. After engaging the brake and releasing it the speed selector drops back to first gear all the time. Any suggestions? Thanks.
@D-MAN107
Жыл бұрын
Probably has a worn selector
Thank you so much for taking the time to make this comprehensive video repair. I always wondered how I might lift my mower to do this job myself and now I have a good idea. Very smart using a chain lift and lifting the rear of the mower where most of the weight is. How did you get it up on that work bench table?
@D-MAN107
12 күн бұрын
Glad to help
What is the lenght or part number of the new belt? Looking on the internet it seems to be a mystery. Thanks
On the blade pulley does the belt go behind the break
What is the part number of the new belt you installed? The parts websites are giving me different numbers. Thank you
Thanks Much!!
@D-MAN107
Жыл бұрын
You're welcome!
What about removing the whole deck shell? That video would be 🔥
What size is the belt
@bail10k44
2 ай бұрын
its a 954-05001 belt
@7202ford
Ай бұрын
43.5x 1/2
Do you have the model number of the belt. I thought i did but the belt came too small. I have the r1000 as well and need roo chasms this exact belt.
Great video!! Consider a 3M Ryman notched belt & HD dressing ( I know, but a little dab' lol do ya? Quiet, smooth & lasts & lasts. Since 1994 on my 90 , 2 belts & lathe center lube on the bearings & engagement! 😉😀 , Working on the CLU-BRAKE0 ADJUST " to keep the front wheels down & my teeth fillings in? Any idea's 🙏 you've tried? Updated fuel to filters, "T" connectors & a dump valve ( Amazon kit) braided line & I can dump that " moonshine fuel & water" stabill it & go another year? That $23.00 a gallon can gas is obscene ( purt pumps are 70 miles a way & my friend at the airport retired , so no 135 pure octane to mix for a while. ( Got some at EAA this year 4 next but then : BIDUMB corrosives? Yet still a good tube👍
how do you adjust the height of the mower blades , mine are too low, is there an adjusting screw ? Great Vid !!
@D-MAN107
Жыл бұрын
I that mower there is not much adjustment unfortunately.
Great video ! I have a 5 yr old Troy bit 30 R and will use this if my belt is shot ! ... need help or video on how to grease front wheels which have fittings but for some reason won't let a small grease gun let grease go in ??? Thanx
@D-MAN107
Жыл бұрын
The fittings are probably clogged with dirt
@TheTigolebitties69
9 ай бұрын
They are not actually grease fittings. They are just solid plastic knobs that look like grease fittings. I did the same thing a while back but after installing 2 new tires found them not to be zerk fittings at all.
can u make a video on how to replace a drive belt pls
I have the same mower... I recently ran into the problem where the engine dies when I engage the blades. It deos die immediatly. It will slowly putter for minutes before it either revs up and gfoes or just sputters out and dies. Once it dies I cannot start it again. Usually it will take a day before I can get it to start and when it does white smoke goes out of the exhaust. Its not the safety switch as I already had that. Any idea what that might be? I would like to know where to start looking on my own.
@D-MAN107
Жыл бұрын
Sounds like leaking fuel in the oil. Check oil see if smells like fuel.
any way you could tell us how you jacked up the rear end to do this? I don't have a pulley or anything - just curious of a way to get it in the position you did for this video. great information btw- thanks for sharing.
@D-MAN107
Ай бұрын
I use a electric winch hanging from my ceiling. But anything can work or even a engine picker
I got the pin off, but my deck won't drop. I can't pull it towards me enough to get it over the "arm" it rests on. ??
my question is how can you raise/lower the cutting deck? Searches don't give me any help. My mower is set on the highest setting "level 5" but is still too close cutting, and setting 4 willl scalp and bog down the engine. I could use a 6 and 7 ! It seems the only adjustment is a hex nut facing forward to slightly raise the front of the deck. Any help out there?
@D-MAN107
Жыл бұрын
Not much adjustment on these mowers they are built very cheap
I have a 30 inch R110/TB30 like in this video. My problem is the DRIVE BELT broke. I can't seem to find a video or detailed instructions on how to replace this belt. Any suggestions?
@D-MAN107
Жыл бұрын
I will post one on the next job that comes in
My belt slip some when grass is tall does it need tighten or new belt u think
@D-MAN107
Жыл бұрын
New belt not adjustable
Thanks!
@D-MAN107
Ай бұрын
Thanks!
I bought mine at a garage sale what is the part number for the belt and what's the part number for the blade on The rer 1000 30 inch deck mower
I have an MTD 30" rear engine mower. how does the forward reverse shifter knob come off?
@D-MAN107
3 ай бұрын
Pulls of or twist
Watch the torque on the 30 on the blades
Great video. Do you have on showing how to replace drive belts?
@JayMuzz-xn3rv
Ай бұрын
Lol same here
@JayMuzz-xn3rv
Ай бұрын
You find one
Nice video. I got the same mower. My problem is with the brake for the blade. It doesn't move. Could use your experience and knowledge. The handle does not have any resistance when I engage the blade.
@D-MAN107
8 ай бұрын
Thanks for sharing sounds like the cable is broken for the blade engagement.
I'm trying to replace the drive belts on the tb30r Troy Bilt riding mower. Do you have a video?
@D-MAN107
Жыл бұрын
Not currently but I'm sure we will
I just purchased this mower. It was working great until it would no move forward. I found a part of the belt broke. Would that belt stop mower from moving?
@Official_VehS
Жыл бұрын
no the belt he is replacing runs the blade. there's a different belt that runs the diff that powers the lawnmower
@D-MAN107
Жыл бұрын
Probably has a broken or jumped drive belt under the engine
I need a video on replacing the drive belts
@JayMuzz-xn3rv
Ай бұрын
Same
does this mower have just a deck belt or is there another belt? I only see what appears to be the deck belt but manual says there are 2 or 3 belts?? thanks for any feedback
@D-MAN107
Ай бұрын
It has a drive belt for transmission also
What would cause the blade on a trobuilt tb30r to not disengage?
@D-MAN107
3 ай бұрын
Belt to tight wrong belt or cable is rusted or linkage is getting stuck.
Hi! Really enjoyed this video, a HUGE Thank You! But am stuck, have a troybilt tbr30, my first belt fly off, am replacing it on garage floor. I do not have the strength to lift the back end, can only lower the deck to the lowest position. ANY suggestions please, from anyone out there, to get this new belt on the front pulley? Yep, a girl tacklin' it herself! Thank you in advance.
@D-MAN107
3 ай бұрын
Good luck! It can be done on the floor like your trying.
My tr30r won't go forward or backwards it happened 2 weeks ago any suggestions or help would be appreciated...thank you!
@D-MAN107
2 ай бұрын
Drive belt is off or broken most likely
How do I adjust the clutch on this 30 “ lawn tractor
@D-MAN107
Жыл бұрын
Not really any adjustments it's all in the belt. If belt is worn needs replaced.
Great video, My gf son in law has one of these mowers, he broke the handle by the pully on the left side, what is that handle for?
@D-MAN107
2 ай бұрын
Helps keep the idler pulley in line
How to adjust the belt?
Belt size?
Hi, I have the Craftsmam version of this mower, r1000, what is the correct socket size and direction of thread for the blade. Thank you.
@D-MAN107
Ай бұрын
15/16 socket regular threads lefty loose
I have the same mower and it won’t move back or forth. What do you think is causing this?
@D-MAN107
Жыл бұрын
Drive belt or brake stuck
If possible could you show how to adjust Brake/Clutch pedal so it will lock in place.Mine wi8ll catch a little and then pop up.. Thank, Dick W.
Can't seem to get belt on 42 inch weedeater riding mower
What size belt is that ???
Great Video. Do you have parts or brand name number for the belts you used?
@D-MAN107
Жыл бұрын
Yes
I have one of theses and the drive belt broke. I was told that it is a real pain to replace and that it was not worth repairing. So just how do you replace one ?
@D-MAN107
Жыл бұрын
It's not that bad really.
What’s that belt size. Online it says 43.5 x .5 but it’s to big
What is a broken spindle mount? Where is it exactly?
@D-MAN107
Жыл бұрын
It holds the blade and mounts to the deck
That bolt that you called a "belt guide," I've lost it and can't find it for purchase anywhere using that description of "bolt guide." Any ideas to help me with the search? Thanks!
@D-MAN107
3 ай бұрын
Lawn mower shop can order one. If not contact us.
@whobeewhatee
3 ай бұрын
@@D-MAN107 alright, thank you
How to remove the engine on a troy bult 30r in rear engine riding mower
How did you get the mower up on the work table?
@D-MAN107
Жыл бұрын
Table goes up and down like a lift
@travisdavis1609
Жыл бұрын
What's the best/safest way to lift these mowers to change blades? Lift the rear, front or tilt to side?
I need to replace the drive belt on mine….heard it is a real pain
@D-MAN107
Жыл бұрын
It's not to bad but it's tight
I have a Troy riding mower. I left it sitting for two years brand new or you all work and no return over but won’t start someone say I need to dump all the gas out and clean the carburetor. I don’t know can you help me
@D-MAN107
Жыл бұрын
Sounds like the carburetor needs cleaned and fuel system flushed.
What is the size of the belt ?? Part #??
Do you guys have a video on changing the Drive belts on the TB30? Thanks this video was great!
@D-MAN107
Жыл бұрын
Not yet
@StellingGDL
Жыл бұрын
@@D-MAN107 yes please do
My belt keeps coming off, would replacing it fix the issue? Thx
@D-MAN107
8 ай бұрын
Possible but may have other issues
I have this exact same mower, and it dies whenever I engage the blades. Runs perfectly fine when blades are off. Is this the belt I need to replace to fix that issue?
@D-MAN107
Жыл бұрын
Sounds like the safety switch on the side discharge check to make sure it's being pressed all the way.
@TSyoyo
11 ай бұрын
Did you ever figure out what the issue was? Mine doesnt die but it seems to bog the motor down and it shakes a bit. Runs perfect without the blade engaged though.
craftsman2 ride-n-mulch 30' cut need the drive belt size
The video is helpful but what if the belt is broken and not routed properly, can you show us how to fix our mower when the belt is gone or completely shredded? I have issues that your video didn’t help me with. Like the black lever you say goes up in the frame, mine has a spring and I see the spring on the one you’re working on, my spring isn’t connected to anything and luckily I see yours is mounted under the arm so I’ll see if I can mount mine like I see in this video, but that lever is connected to a pulley and that is also connected to a black piece of metal that has a rubber guide that rides inside the pulley for the blade, when I route the new belt like I see you do in the video the belt contacts that guide and it damaged my new bell I installed myself without seeing any video of on you tube. I fix cars so I figure I can replace a mowers belt, but I didn’t see that guide and didn’t know it was shredding my new belt until it shredded it. I’m getting my new belt today from Amazon so hopefully I’ll be cutting grass again soon. But I sure wish the video would show what to do if the belts failed, not a preventive maintenance video.
@bryanrussell8770
Ай бұрын
Okay my belt just arrived and I installed it no problem and yes this video helped out greatly. I think my mistake on the first install was not making sure the spring the goes under black lever of the tensioner was installed correctly and it caused the tensioner pulley to be in a downward position and by that happening the belt was twisted and getting shredded. Thanks for the video. Now I need one that shows how to adjust the carburetor if there is any adjustments available.
How do you get spring on
@D-MAN107
Жыл бұрын
Sometimes a rope to pull it with works well.
I still can't get the blade to engage. Where in the world does the Black on the Belt tightner go. I don't se a function for it but to pull down on the drive belt. Not very7 strong. I checked the PTO cable, iT IS TIGHT WHEN i LOCK IT DOWN. aNY HELO WOULD BE APPRICATED.
@D-MAN107
Жыл бұрын
Not sure what "black" your referring to?
Hi I purchased a used Craftsman 2012 RER1000 and my belt idler assembly looks different. It looks like I have to drop the pulley to get the belt out and that assembly is just floppy there is no spring tension and the bar you show with the black end is not attached 6:42 . Where can I find a parts list for this so I can purchase and get this installed correctly?
@D-MAN107
Ай бұрын
Partstree.com has good diagrams
@DougVermilyea
Ай бұрын
Thanks it looks like I need a missing spring on mine no bar. So once I get the spring then I need to figure out what it attaches to.
What size belt is used for this?
@phartusd67
2 ай бұрын
1/2" by 43" for the 30" deck models
I can't get my deck to engage could the belt be stretched
@D-MAN107
3 ай бұрын
It's either off a pulley or could have broken cable
Hey man, great vid. Subbed. Can you PLEASE help me, that little tensioner bar with the black like plastic end on it, the bar that is attached to the idler pulley, that somehow sheered off in half and I can't find the part anywhere or exact name of it. It's the chrome bar like 6 inches approx long with a 2 to 3 inch like black plastic/hard rubber end with 1 screw and thr very end of it bends in and sticks into the idler bracket, the black end sits against the mower I think. You know what I'm talking about I'm sure. I have to get this mower working asap, thanks a ton man!
@D-MAN107
8 ай бұрын
We can order one just call us at winderoutdoorpower
@Slevinlobell
8 ай бұрын
@@D-MAN107 will do. Prob needs the whole idler pulley assembly I'm guessing and not just thr bar. I can post a pic of the broken part on your social media if that helps too
What size belt?
@youknowme8693
9 ай бұрын
selffish ass dude not disclosing the full info