Thanks buddy for this video as it was very helpful! I purchased my CC 30 H brand new in 2017. I set up the blade change exactly like you did, same ramps, correct 15/16ths socket, blade, etc. Thanks! This was the first blade change on this mower. With the 18 inch breaker bar I couldn't budge it. I'm actually a pretty strong dude. I purchased a 30" breaker bar and saturated the "fused" nut with BLASTER penetrating catalyst. Let her soak and two (2) pulls released it. I actually laid on my back with my feet against the wall which helped allot. (Short dude). Your great informative video caused me to get off of my dead ass and do it myself. It was actually easier than changing the oil which I do every year myself. Thanks again!

Thanks a lot. I have to replace my blade today and your video helps me know what to expect.

Thanks a LOT brotherman!!! My main concern was loosening direction for blade nut. . . Years ago industrial mowers blade nuts were opposite the traditional lefty-loosey righty-tighty, and I figured by now someone like craftsman would have figured a way for their blade to tighten and loosen the good ol fashioned american way. Lol. Plus I forgot that the blade needed to be held still to loosen as well. Thanks for taking the time, I appreciate ya

Set the parking brake, lifted the front of the mower with one hand. Hit the nut with a cordless impact driver in the other and had the blade off faster than the length of the video of the RR at the beginning. Easy Peasy - Thanks for the socket size and the thread direction information.

Thanks, this video was very helpful!!

Thanks for the video, helps us weekend warriors out!

Nice clear video and instructions! For safety it's best to use a torque wrench to tighten the blade nut to between 70 and 90 ft/lbs.

Them ramps are wonders I change my oil in my expedition with these . I was nervous it they work no problem

Thanks, very informative!

Very informative and helpful guide/video. Thanks a bunch! Wishing you well from Atlanta, GA.

Great vid.

Hi Timbo...nice video brother....new sub...your video helped a lot....Tks for sharing...take care!!

Thanks Timbo for the information and Great Video 😎🤙

Hey Tim, do you still have that Cub Cadet CC 30 H? If so bro I need your help ASAP with mines……. I have a part that’s missing from the carb or the choke , I need your help!!!!

I just bought bought the Craftsman 30-inch riding lawn mower with a 10 and a half horsepower use but in very good condition... should just last me for a long time.... is that a pretty solidly put together more I've heard some reports that the steering column has Cheap component

Timbo please show me how to remove battery on cub cadet cc30 as it is not under the seat and looks difficult to remove. Much appreciated. Brian

Based on your experience with these mowers, is there a recommendation of the most reliable 30"? I was looking at the r110 but read about a lot of steering issues which concerned me, but see they are all made by MTD.

Great video. Do you have one for changing the transmission and blade belt?

What would be the torch lbs be to tighten nut

Why not just sharpen the blade rather than replace it?