I would love to know where in the world you are all watching from. Let me know below. Enjoy

@dariushmilani6760

5 ай бұрын

Leeds 😂

@JackMackWoodturning

5 ай бұрын

What’s funny about Leeds 😆

@nathyroque404

5 ай бұрын

Guadalajara, Jalisco México! 😊

@jettcarlburg356

5 ай бұрын

Austin, Tx 🤠

@jimdaly5077

5 ай бұрын

Canterbury UK 👍🐝🌞

I had absolutely no idea where you were going with all that! What a surprise!! ❤

@JackMackWoodturning

5 ай бұрын

Ha. That was kind of the point. Did you enjoy trying to work it out ?

@heathercollins4432

5 ай бұрын

Same!

@snowysnowyriver

5 ай бұрын

@@JackMackWoodturning I did! At various points I thought you were making a jewellery box, a vase and a flower pot. All wrong !!😄

@Colorado_Native

5 ай бұрын

I thought you were going to make a very tall wine bottle with a wooden base and a wooden cork. Shows what I know. I mostly make dust and chips on my lathe, and on the floor and the window sill ... you get the idea.

@austinbevis4266

5 ай бұрын

That’s odd, aside from the coin jar, I knew exactly where this was going from the first cut. I will say that I expected a candle stick instead of the type he used.

For the lamp, consider cutting several spiral slots into the wood where it overlaps the glass. The air entering the chamber will be swirling upward and may result in an interesting effect for the flame. Thanks for showing the projects.

@JackMackWoodturning

5 ай бұрын

Nice idea.

@user-hj7zk5lo7c

5 ай бұрын

That's the minimum. The slots are simply necessary, since without them the candle will die out very quickly due to the lack of oxygen flow.

@user-yt3fn4ix5n

3 ай бұрын

Nice work.

@sebastianpereira2132

Ай бұрын

There is no point in making spiral holes, especially since it is too complicated! It is enough to drill vertical holes in the wooden stand, and the stand needs to be raised - attach legs or something similar to it so that the air can flow freely from below. P.S. The easiest way to prevent a candle from going out in this case is to drill several horizontal holes in a wooden stand towards the center of the stand and then drill the stand from above so that the horizontal and vertical holes are connected. You will get L-shaped holes.

@marsogreen2411

22 күн бұрын

Also, vertical slots in the wood or glass would give a tornado effect to the flame, if so desired

The way the glass separates is priceless!!

I would be pleased with any or all of these pieces. I loved to watch my father woodturning , he made so many things for our family. Watching these posts brings back wonderful memories. 👍🏻😊💜

Your work with glass bottles is truly an art form, Jack! It's not just about technical skills, it's about seeing more in everyday objects. Keep up the good work!

Who knew wine bottles could have so many other lives? Very cool, Jack!

@JackMackWoodturning

5 ай бұрын

Thanks ☺️

@r.martin3494

5 ай бұрын

I loved that you pushed the cork back into the bottle neck from inside. For me it was a great surprise as the plan all came together at the end as I wasn't trying to imagine ahead, just chillaxing.and examining the technique. I think for the wine glass, I'd want a shorter neck and a wider wood base so that it's more stable on the table! 😊 Plus real careful not to try to accidentally bend the bottle-neck when pressing down, but you had to hold the camera at the same time, probably, I get it.

Absolutely amazing! I had the bank figured out, but the wine glass and candle holder I was clueless. Great job Jack!

@JackMackWoodturning

5 ай бұрын

Nice one! Glad to keep you guessing. Which one was your favourite?

@MrTowelsplug

5 ай бұрын

​@JackMackWoodturning mine was the bank; because it's something to put near the entry way and is super interesting. Good conversation starter when having guests. The candle one is great too I just hate the smell of most wax personally. The wine glass is intriguing because if you leave the cork in long enough it might change the taste amd add complexity to the future pours. Good if your buying a case of your favorite red maybe?

I’m especially fascinated by how you cut the wine bottles! The end result is phenomenal!

@JackMackWoodturning

5 ай бұрын

Thanks, will you Try this yourself?

@thefallenarm589

5 ай бұрын

Some spirit bottles really fit this operation to make candle holders, like gunpowder or silent pool gin bottles for example

@snafu2350

5 ай бұрын

It's a v ancient technique, occasionally used in olde-worlde-themed (hence extremely expensive) restaurants to open wine bottles without a cork puller; for pure flashiness, try a bucket of ice water, a feather & a pair of heated tongs :)

@brianalleyne8978

2 ай бұрын

It's the best way I've seen bottle cutting so far. Great work.

@denajackson6274

Ай бұрын

​@@snafu2350 what do you do with the feather?

Great work. One thing that is important to know is that the reason the internal combustion engine became the main engine for aircraft was that using a simple lathe, an all aluminum engine block could be carved out, with the pistons, etc. That was the key to the success of the Wright brothers. Internal combustion engines had been invented decades earlier, but the industrial smelting of aluminum with electricity had just been invented in the late 1880s, and it was not until then that aluminum became cheap enough for them to order a solid block of aluminum to make their aircraft engine. Making a jet engine with fan blades that could sustain the heat and stresses on an engine was a lot harder, which was why Whittle's early jet engines had centrifugal spinners.

@user-tp1nq8tv1d

3 ай бұрын

Аллюминий? Он разве выдерживает температуру внутреннего сгорания?

I love how the fourth bottle was holding wine to pour at the end of it all

I respect those masters who try to make something beautiful , interesting and useful for people . 😎

I like how you recycle the old wine bottles . I make whiskey tumblers out of od whiskey bottles and give as gifts and sell some . A tip for you to try after sanding the edges of the bottles you can flame them on the edges where they were cut and glaze the glass back smooth you have to get the edge pretty hot but the end result is awesome.

@JackMackWoodturning

5 ай бұрын

That sounds great. Il have to give it a try

I'm not a wood turner, but I am an artist and I see the beauty in what you do, besides, I'm almost 70 and my hands wouldn't be able to do it, but I really enjoy seeing what you turn out

Прикольно! Про копилку стало понятно, как только Вы сделали продолговатую прорезь в дереве, с бокалом для вина тоже всё было понятно с самого начала, а вот с подсвечником сюрприз вышел. Очень красиво! 👍

@user-xd6pk1lp2x

5 ай бұрын

А мне кажется хрень

@annettemccoy7476

5 ай бұрын

I can't believe I took the time just to translate a troll

@jadwigaradziewicz

5 ай бұрын

@@annettemccoy7476 Тролля? И кто же тролль?

@nike16384

4 ай бұрын

@@user-xd6pk1lp2x, действительно лажа какая-то.

@vitaliychumak4158

3 ай бұрын

Сюрприз??? А как будет гореть свеча в закрытом объеме без доступа кислорода ???

The lathe is the king of shop tools. And this turner is the master of the craft.

That's like, who knew? Each piece unique. And it's an awesome set!

@JackMackWoodturning

5 ай бұрын

Thanks buddy, Which one was your favourite?

I absolutely love it!! Definitely creative!! I had no clue where this was going, because I know you really can't "turn" glass, but you can cut it!!

Glass bottle on a lathe,never thought that was possible, amazing

@JackMackWoodturning

5 ай бұрын

Thanks Which was your favourite?

@Shawn666Hellion

5 ай бұрын

@@JackMackWoodturning the glass wine bottle drinking glass that was ingenious

@johnskipper4975

18 күн бұрын

erm i was taught glass blowing on a lathe i have more trouble imagining how people free hand things.

What amazes me is that all the turning is done by eye. His eye is accurate to a thou!!! South Africa

This video is fascinating! As a retired manufacturing engineer (North Carolina USA) I really enjoyed seeing your process and chuck fixtures used to hold the various stages of your work in process.. very creative and functional! There is a similar video on YT of a woman in a camping scenario using oily twine tied around a bottle, then lighting the twine to heat a ring around it so the bottle separates when submerged in water. Variation on the same principle used here. There are some very creative geniuses in this world!

@patrickmarr7076

5 ай бұрын

kzread.info/dash/bejne/kYt518aznsWrqpc.html

This guy is an artist and his woodwork looks beautiful

I had no idea where you were going with this and then the surprise was revealed! I always wonder where you get your ideas from. A great mind with no doubt in my mind that what we are watching is both imaginative creation and complex skills at another level.

@JackMackWoodturning

5 ай бұрын

Thanks Kath. I just spend a lot of time thinking about this stuff 😆

So good to see that these bottles can be re-purposed. Well done and beautiful!

LOL LIKE 'BACK TO THE FUTURE ' , WHEN MARTY TURNS ON THE BASS!!!

Amazing. I thought for sure you were in for a nasty breakage, but you did it, and made some lovely items.

@JackMackWoodturning

5 ай бұрын

Thanks Sue. It was harder than it looks. Which one is your favourite?

@susannah4Him

5 ай бұрын

I’d take any of them in a heartbeat! BTW- I’m from California.

What an awesome way to recycle bottles. Nicely done!

@JackMackWoodturning

5 ай бұрын

Thanks sally. You going to try it ?

That's really dope. Good job. All the pieces were coming together and I saw what you were creating before you put them together. You're very talented.

... مهارة و دقة عاااااااااااالية حرفي متمكن جدًّا... يعمل في ورشة(atelier) مجهزة بوسائل و آلات عالية الجودة... تبارك الله عليك... ❤❤❤

Amazing pieces, Jack. At first when you put the bottle on the lathe, I thought you were going to carve it, this I had to watch. Well I suppose you did in a way. 😊🇦🇺

@JackMackWoodturning

5 ай бұрын

I had to work within the limitations of the bottle unfortunately… if I could have carved it I certainly would have 😆😆😆

Wow! What you have made with the bottles is absolutely awesome. If only I could afford a machine like yours! Well done 👍

Brain + creativity = perfection. salute to Jack Mack. Live healthy n strong n do good things. 🙏

Near an old sawmill close to Kingsville, Texas where my college landlord used to love wood turning. This was very satisfying to watch !! TY.

Brilliantly done. Great video. Very elegant end. Take care, thanks 😊

@JackMackWoodturning

5 ай бұрын

Thank you! 😊 Did the video keep you guessing?

You can score bottles with an Avalon bottle cutter, rotate the scored line over a candle, and chill the bottle under cold running water. Pops right apart. Same result.

@JackMackWoodturning

5 ай бұрын

That’s literally what I do in the video 😆😆😆

This Man is a genius

Great stuff. And well done anyone wanting to correct his ways. I'm sure he'll be undyingly grateful.

Очень интересно наблюдать, что же мастер задумал? В итоге такая прелесть, и как здорово бутылки обрезать, первый раз такое вижу! ❤❤❤🎉🎉🎉 Р. К.

Hello Jack I wondered what you was going to do with the wine bottles and you amazed me s usual. The tea light holder, glass and moneybox are magnificent and unique, you truly are talented, and an artistic person and you are clever as you can put your hand to anything to make these things. Well done great video Amanda xx

I saw a guy heating old bottles up, then he used pieces of glass and held them in his forge with pliers, and when the piece of glass was beginning to soften, he used a second pliers to pull the glass apart. By working quickly, he could create thin threads of glass that would stick to the side of the bottles he had cut apart. With different colors of glass, he made some really beautiful patterns! He made mostly drinking glasses, but also napkin holders (by cutting smaller bottles), and I remember some cool trays and a "pot protection" (not sure about the English word, but to protect the tablecloth or the actual table from the dirty or hot pot or pan), and his mix of wood and glass was truly a great idea. That made me think; why not make a tray with parts of fused glass and wood. You could prepare a "fika" in the garden, and with the tray, you can easily carry the buns and cookies, but instead of a thermos, you can have the coffee pot with you, as the tray have a detachable "pot-protection".

There should be a sign on these vids saying watch if extremely tired.

Красивые вещи сделаны на прекрасном оборудовании!

@user-mr9kv2lg3c

2 ай бұрын

ага , когда собаке делать нечего ...

Awesome! Very creative! ❤

@JackMackWoodturning

5 ай бұрын

Thanks, which was your favourite?

Minutes of life I will never get back

I like watching you create objects from the discarded things in life! You are a good teacher, I’m sure…🙂

@JackMackWoodturning

3 ай бұрын

Thank you very much. Did you like this one?

@Cliff6965

3 ай бұрын

I burn lots of candles 🕯️

Love it, simple, well executed and beautiful. I still can't wrap my head around having glass on the lathe, even on very slow speed I'd be sweating buckets if I attempted that. Cheers!

@JackMackWoodturning

5 ай бұрын

I do hope that people stay within there comfort zone when at the lathe. I took this very slowly and safety

@r.martin3494

5 ай бұрын

​@@JackMackWoodturning Suggest more about safety, Jack. I've made a suggestion for you "topside"; at one level up from "Replies".

Absolutely brilliant Jack! 👍🏻 Thank you for sharing!

@JackMackWoodturning

5 ай бұрын

Thank you for watching 👍🏻

This was so fascinating to watch! When I was in college, I made a wood mallet out of a bowling pin. It was so much fun. I wish I could afford a lathe set-up like you have!

I have spent the time watching your video in the hopes of seeing something that resembled the title picture but I’ve been had. A really good way to never have me watch another one.

@JackMackWoodturning

Ай бұрын

You are one of 100s who skip through the video then exclaim the thumbnail isn’t in the video. It’s taken directly from the video 👍🏻

Trop génial! Comme d'hab!🤩

I clicked on a troll thumbnail, stayed for a creative journey.

@JackMackWoodturning

Ай бұрын

What is a troll thumbnail ?

@Singe0255

Ай бұрын

@@JackMackWoodturning I wanted to see the 3 bottles wrapped in twine, loaded into the lathe together, despite knowing full well that such a thing would be an unmitigated disaster. Your thumbnail was great clickbait, trolling even, and despite the image presented never appearing in the final video, I stuck around. Amazing work, and doubly so because ya hooked me enough at the start to get a full watch.

@Singe0255

Ай бұрын

@@JackMackWoodturning oh, watching from Southern Oregon, USA, by the way, since you asked in the other comment.

From South Africa. So glad I came upon this phenomenal pleasure

Just love watching the work manship and the wonderful things that he makes

@JackMackWoodturning

5 ай бұрын

Thank you. which one was your favourite?

@lorraineelizabethhemi4666

5 ай бұрын

@@JackMackWoodturning the money box

Dude, you REALLY should wear gloves when you sand down glass.

@czhusky

2 ай бұрын

I would really not recommend nothing but nitrile gloves, no sleeves or loose clothing when operating rotating machinery.

@rehanafarooqi9163

2 ай бұрын

@@czhuskyI agree, and don’t forget to wear goggles and a face mask 😷

@czhusky

2 ай бұрын

@@rehanafarooqi9163 absolutely 👍

@gena4480

2 ай бұрын

В штанах не потрахаешься, а в перчатках не сработаешь. Эта пословица по русски иначе звучит, но я сделал так что бы переводчик перевел для советчиков ,как профессионалу работать👌🔥

@demonicsquid7217

2 ай бұрын

Plate armour best all round protection.

Great work! 👍👍 I had NO idea what to expect from the title of the video. I never would have thought to score the bottles that way. In the late 70s / early 80s there was a craze for making glasses from bottles. I knocked up a 'roller' type system to score them accurately.

GOOD JOB JACK, That's impressive craftsmanship. I think it's great how you fit objects to wood, you can't put wood back on the mill. I love it.

Совершенно бесполезные вещи😂

@JackMackWoodturning

2 ай бұрын

You don’t see a use for a wine glass? The use is that it holds wine. A money box holds money and a candle holder holds candles. Each items has a clearly defined use.. so how can they be useless ??

@BamBaleil0

2 ай бұрын

​@@JackMackWoodturning у него просто руки кривые, он вам завидует😊

@yuriy275r

2 ай бұрын

Для заработка на Ютубе полезные 😊

@user-dl9es5fd3k

20 күн бұрын

Даже если мне нечего будет делать, я не стану такой хернёй заниматься...

"How to turn Giant Blocks of Wood into Tiny Objects you will Never Use."

@brookswade5774

Ай бұрын

Woodworking is a lot like riding a motorcycle, which I do both. The destination is not part of the equation. The journey is the point.

@JackMackWoodturning

Ай бұрын

🤙🏻

That wine glass from a wine bottle is incredible! Man! But the others ain't bad either!

@JackMackWoodturning

5 ай бұрын

Thanks. I’m glad you enjoyed it, are you going to make one ?

@DerpyDude777

5 ай бұрын

@JackMackWoodturning I would love to! The splitting the bottle part seems to be easy, but the carving the wood, considering I don't own a lathe, it would take some time haha.

Really enjoyed that Jack, kept me guessing. Man from Kent now living in God's own Country the fabulous North Yorkshire.

@JackMackWoodturning

5 ай бұрын

Love North Yorkshire. Glad you enjoyed the vid 👍🏻

You are very talented! And those would make great gifts for Alcoholics!

Great job! Watching you use chilled water to shrink one side of the score line, reminded me of a time a did that by accident with one of my Nan's glasses. It had boiled water in the bottom of it to soften some old scuzz . Went to rinse it out and as soon as the cold water hit the bottom, it shrank it so rapidly, the bottom just dropped out. Nan not happy, me, amazed at physics. hehe.

สุดยอดมากครับ.ไอเดียเจ๋งความคิดยอดเยี่ยม.ชอบครับ.ขอขอบคุณนะครับที่แบ่งปัน.จากไทยแลนด์.

When I was working with cutting glass, we used to put electric tape over half of the metal end, opposite of the cutter. It was sometimes required to use the metal part against the glass, tapping the backside of the glass to make it crack along the cut, or if cutting a thin glass (like 4 mm or below), we would tap the glass using the coated half of the end of the cutting tool. Good to know; never cut glass and then wait to part it! In just a few minutes, it will start to fuse together again. Good to know, part 2; it never works cutting a circle and then just lift it away, like the burglars do in a movie. A cut never goes deep, it just scratch the surface, and by tapping it from the backside, the tension from the cut will cause it to crack right through when you tap. And by gently tapping along the cut, you'll spread the crack. Or, you can do it like the clip and use temperature to increase tension, but you don't want to submerge a whole window... Good to know 3; don't cut several times along one line. Press the tool against the surface, then you cut. Once. Good to know, 4 (out of 4, so I am done, now); The cutting pen/tool has a screw at the end of it. That is so that you can fill it with oil. Without the oil, it will be harder to work with it. The glass cracks because there's this tiny little steel wheel that rolls over the surface, and you pressing it against the glass will cause miniscule cracks to form right below the wheel and the tiny scratch that will cause. The oil will seep down in that crack and prevent the glass from gluing together. Yeah, you read that right; glass is NOT a solid. It is no fluid, neither, but if you look at windows that are a couple of centuries old, they are always thicker at the bottom, because they slowly "flow" down.

Just blew my mind watching this video. What an imagination.

God bless you. I ❤ your work keep on for the ❤ of art crafts 👍🇨🇺💯

Bravo! 👏👏👏♥ Hollywood Florida USA.

How Jack Mackʻs brain works is just amazing. I am mesmerized!

Accidentally pushed the thumb down ! Now what ! The old bottle Woodturn project so much fun.

I love the way your mind works, Jack Mack!

@JackMackWoodturning

Ай бұрын

Thanks

I usually catch on before the end of the video as to where we are going.... I was clueless until the end...well done.

@JackMackWoodturning

5 ай бұрын

Thanks Larry. Was it at the point of assembly you realised what was happening?

@rogerwoods1351

5 ай бұрын

me too , i had no idea

@larrysimmons7084

5 ай бұрын

Yep....lol!@@JackMackWoodturning

So many things can be done with your skills you are gifted with these skills

@JackMackWoodturning

5 ай бұрын

👍🏻

Previously from Horam and Eastbourne East Sussex; now in Albany Oregon USA. I found your video fascinating. And was pleased to see the 5 £ note, a little nostalgia there. I know very little about wood turning but wood in all its forms pleases me. Loved seeing the finished work ❤

Well, it took a while to get there, but definitely the best glass bottle cutting video I've seen on YT. Not to mention the end products were awesome.

Россия, Санкт-Петербург. Очень люблю мужчин, которые умеют и могут создавать уникальные вещи своими руками. Идея с подсвечником и копилкой неплохая. Бокал для вина не впечатлил, не стоило так заморачиваться ради него.. Но если чисто показать своё мастерство, то почему бы и нет)) Я думаю, вы бы отлично справились с какой-то композицией внутри стекла, но прозрачного. Море идей для воплощения. А вы- молодец, крутой мастер 👍

Я не перестаю удивляться таланту, изобретательности ,супер .

So cool! Didn't know you could cut a bottle like that

Surprised me, I had no idea what you were going to do with those bottles. Good going there, Jack.

@JackMackWoodturning

5 ай бұрын

Thanks Bobby. Which was your favourite?

@bobbydouglas6630

5 ай бұрын

All of them.

Honestly, I couldn't figure this out until the end. Well worth waiting for. Amazing work.

@JackMackWoodturning

5 ай бұрын

Thanks jane. which one was your favourite?

@janethowe8812

5 ай бұрын

Definitely loved the wine glass. I was imagining how awesome a set of those would look on my dinner table. I was also amazed by your technique to cut the bottles. Much easier than using a hacksaw. LOL.

Seattle Washington state West coast U.S.A. Here, THAT WAS AWESOME!! 😊

Thank you so much for this! Great ideas, and very creative!. Красивые вещи сделаны на прекрасном оборудовании!.

Всегда восхищался людьми, которые из ничего могут сделать что-то оригинальное и интересное. Тут главное - придумать. Творческая художественная жилка нужна. Мне понравилось.

@JackMackWoodturning

Ай бұрын

Thanks a lot. Where are you watching from?

That was a nice riddle - I couldn't stop wondering where you were going with the bottles. That was fun! Brilliant!

@JackMackWoodturning

5 ай бұрын

I’m thrilled you enjoyed it. which one was your favourite?

@lysan1445

5 ай бұрын

That's a tough one to decide. I loved the trick with the cork in the wine glass. @@JackMackWoodturning

Tuning in from Fort Worth, Texas, USA. I've never tried tutn wood, but I've built and refinished furniture.

I am visiting family in Scotland but am normally in Bulgaria, which is home. You kept me guessing what you were making here!

Какое расточительство: из огромного куска дерева делать маленькую заготовку!!!

@OldPannonian

2 ай бұрын

I hope that you left this video site and went to enjoy something else.

@yuriy275r

2 ай бұрын

​@@OldPannonianнет, ну рально, можно было взять заготовки и поменьше.

You are literally Timepass Badshah....!🏁👊🏻

American here - always fun to watch you be creative. Thank you.

The curiosity was well worth the wait. Thanks for sharing

@JackMackWoodturning

Ай бұрын

Glad you enjoyed it 👍🏻

Never saw you measure anything,just eyeball it, I shocked when you got it all together, awesome video!

@yuriy275r

2 ай бұрын

Но для русских это фигня, не чудо.

I watch your video's with the sound off and I don't read the description. I try to figure out what you're making. For the life of me I couldn't figure out what you were making here. I love it.

@JackMackWoodturning

5 ай бұрын

Is the guessing something you Enjoy about the watching experience? Does it make you want to watch more or dose it make you skip To the end to find out ?

@mark-ut8ft

5 ай бұрын

@@JackMackWoodturning I like to guess I watch until the end.

Jack Mack! Just a.special creator. Love you Jack always. See you on the next view 🤩

@JackMackWoodturning

5 ай бұрын

Thanks David. Appreciate your continued support my friend 👍🏻

Fascinating , thanks. Reminds me of watching my Grandad in his shed back in the 50's. Midlands UK.

Mind numblingly magnificent. Thank you for this.

You made those old wine bottles interesting again!

That was great. I bought a glass cutter to use with some beautiful bottles that I had left over. But I haven’t done anything because I did not know what to do with them. I’m no woodworker so I wouldn’t be able to do something like you did. Great job.😊❤

Потрясающе, но для этого надо иметь токарный станок, во времена СССР, иметь такой станок было легко, они были на любом производстве - даром, теперь он стоит кругленькую сумму.

@yuriy275r

2 ай бұрын

В деревне в колхозных гаражах есть токарные станки . Заплатишь деньжат токарю, он тебе что надо сделает.

I like your solution to cutting glass bottles! You have all the other glass cutters beaten. Keep up the innovative artistry. This one turned out great!

@JackMackWoodturning

5 ай бұрын

Thank you. I’m glad you enjoyed it. Have you tried cutting bottles before?

@TheParkAttendant

5 ай бұрын

@@JackMackWoodturning yes I have. The results where not all that good. With the ones I had, I could not get a good clean score with the cutting wheel. So when I tried separating the cut, it would chip or crack. I've kept my eyes open for something better. Something like what you were doing. The cutting wheel staying steady, and making a good clean cut.

That assembly at the end was lovey! What a playful and wonderful combination

You should use water when sanding glass, it reduces harmful particles.

@JackMackWoodturning

Ай бұрын

Which harmful particles?

@bigs6878

Ай бұрын

@@JackMackWoodturning The dust produced when sanding glass can be very irritating to the eyes and lungs. Probably not a big deal, but it is better to be safe.