There are some good slow (24 hr.) cure urethane paints out there now, I got some for my bumpers on my RZR and I swear it is tougher than any powder coat!. (about $30 a pint) plenty enough for a hull.

One of the best videos for the process I have ever seen. Which is better for durability Gator Glide, or Super Slick? I know it is mostly a subjective opinion but I bet there are good points and bad for each.

@chattanoogafiberglass

2 ай бұрын

Super slick has a TDS so naturally I trust it more

@vitoconginejr3283

2 ай бұрын

@@chattanoogafiberglass Sorry, unfamiliar with the term TDS.

@chattanoogafiberglass

2 ай бұрын

@@vitoconginejr3283 technical data sheet most chemicals and paints provide with information on use, instructions, reaction, etc

It would be very helpful to see a video of you repainting a JetSki bottom and the process.

@chattanoogafiberglass

6 ай бұрын

I can do that. When I have another one come in and I have to paint it I’ll make a video. Almost the same process just sand the hull p600, base and clear or polyurethane paint like awlcraft 2000!

@chattanoogafiberglass

6 ай бұрын

Also I believe I have some SHORTS of some paint work and one on a white ski top side

@bigboyben6

6 ай бұрын

I have some experience painting car parts so I'll be using a hvlp gun, since this is a project ski am I able to use a single stage black on the bottom? I've seen that companies selling a epoxy primer looking for something simple. Also is just a scuff fine or do i have to sand all the way down like your gator glide video? thanks@@chattanoogafiberglass

@chattanoogafiberglass

6 ай бұрын

@@bigboyben6 p220 the hull, epoxy primer 24hr cure, sand epoxy primer p400 then p600 then use a single stage polyurethane. Awlcraft 2000 is best

@si-sb2mx

5 ай бұрын

never had such a smooth finish with single stage polyurethane, now that gun is coming from the States@@chattanoogafiberglass

Excellent vidéo.i would like to know how much of gator glide do you need to put in paint gun for one layer for waverunner ?

@chattanoogafiberglass

5 ай бұрын

Check out the description I have mixing Instructions. 1 quart will do 1 ski

@khalilkenouche2063

5 ай бұрын

@@chattanoogafiberglass sorry my english is not good .i juste need to know how much did you put in paint gun to do juste one layer ? I undestund one quart is enought to do one ski but i need how much to put in gun paint for one layer .iam really sorry to bother you

@chattanoogafiberglass

5 ай бұрын

@@khalilkenouche2063 you can roll it as well.

@chattanoogafiberglass

5 ай бұрын

4oz part A into paint cup then pour 16cc/Ml part B into cup and mix.

@khalilkenouche2063

5 ай бұрын

@@chattanoogafiberglass thank you very much sir 👌👌👌

Why not drain the oil in the fuel and flip it over it just seems like it would be a lot easier to work on

@chattanoogafiberglass

Күн бұрын

@@svdesertdepartedjoe9621 would be. I don’t have a gantry just yet to be able to! Good idea tho

Do you have to be pretty quick about removing the tape?

@chattanoogafiberglass

2 ай бұрын

Remove before cure

What does it cost to have a wave runner done?

@chattanoogafiberglass

5 ай бұрын

I charge $1500 that’s if there’s no damage on bottom

Is there a reason for not using gatorbase first?

@chattanoogafiberglass

3 ай бұрын

Gator base is the same chemical properties just different color for an indicator for when it’s time for a new top coat

Thanks for show us how easy it is a DIY only if you have all the tools and to also lift up the ski. Not worth it for me, I rather pay for your work.

@chattanoogafiberglass

3 күн бұрын

@@kkutube1972 bring it on!!!

So who cares it's the botton for pete shakes