Why are these wheels so much more expensive? BEADLOCKS! | Project 250R Part 10
Автокөліктер мен көлік құралдары
#atv #offroad #quad
Why are these wheels so much more expensive? BEADLOCKS! | Project 250R Part 10
The OMF wheels for project 250R came in and I noticed some difference in features and quality compared to other Beadlocks I've run before.
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
Пікірлер: 73
Thanks for watching! What kind of beadlock do you run? Next week will be a video showing the mounting of these tires and some Project 250R welding before we send the parts to powder coat! 🤘
@DawidSlodyczka
4 жыл бұрын
Uhhhh, I planned to get beadlocks but got no clue what to get tbh. Been thinking of goldspeed but still leaving my options open still.
@nathanm.3713
4 жыл бұрын
Did you ever post your banshee speed run with the 22in tires and the bigger front sprocket?
@MichaelSabo
4 жыл бұрын
Goldspeed makes a good wheel; I damn near bought those instead of OMF
@MichaelSabo
4 жыл бұрын
No, I spent 2 days filming it and ran into issues with the local ordinance complaining while John and I were doing the runs and trying to fix the speed wobble. I will get around to doing that but right now the 250R is my focus.
@nathanm.3713
4 жыл бұрын
Michael Sabo right on man can't wait to see where you take the 250r build 👍
I ran Douglas and Holeshots when racing quads in California, what all the boys ran...
@MichaelSabo
4 жыл бұрын
Nothing bad to say about DWT; great wheels
I've been to the omf facility got a tour from the owner small facility but top notch equipment he showed the start to finish of making wheels and headlock rings
Longlivethefourtrax250r
I'm Mark from HSD at 04:55 and I'm slowly adding all the parts that Mike is using on project 250R here: www.hsdracing.com/M309R-Patriot-Prodlist.html
Put those tires on regular wheels and have them balanced for the high speed run.
Those black wheels look killer!
Just want to say I’ve been subscribed since you’ve had close to nothing subscribers and I’ve watched it grow and personally I think you should have way more followers because your content is great and very thorough. But don’t let the numbers bother you just keep doing your thing I enjoy the vids a lot.👍
sweet looking wheels for the R . I tried holeshots a couple of times . the guys I rode with on the mx track in the early 2000s use to have all kinds of tire set ups for each track and conditions . my favorite was the maxxis razzr . when I had holeshots I found that they slid out easy on turns when you charged them hard in most mx track conditions . the maxxis razzr I never had a problem they hooked in every condition . lately ive been running the gbc xc masters because their half the price of maxxis not as good of side walls but they hook like maxxis in my opinion for the xc series I run
@MichaelSabo
4 жыл бұрын
Thank you for the info man. This will be the first time ever riding with holeshots but I've run Razr's before and loved them. I hear really good stuff about the GBCs too but I've never tried them.
Ho yeah 1min left!!!
I love black wheels those are sweet
Bad ass bud👍🏻
Great stuff thanks for the knowledge 👍
@MichaelSabo
4 жыл бұрын
Thank you for watching man!
@Tampaboys
4 жыл бұрын
Keep the videos coming you are really good on camera.
Sick wheels bro🔥🔥
@MichaelSabo
4 жыл бұрын
Thank you bro!
Cant wait to see this one
Goldspeed wheels are really good
Have you searched to find balancing beads/balls for the banshee? Idk if you can find em for that use but I know of guys running in super swampers on trucks.
Hey mike those Ebay wheels arent a total loss....a set of beaters are always handy...if you know a guy with a lathe...you can put that groove on there
Holeshot is best tires and what your favourite bead lock rims
Doesn't the lip on the ring help to center them on the cheaper ones? Can you just balance them just like a motorcycle or car wheel??
Bro I just found your channel and you should have way more subscribers than you do but u will get there. I love the raptor build by the way. Did u keep it or sell it ?
@MichaelSabo
4 жыл бұрын
Thank you for watching my videos bro! I loved that Raptor but I needed to sell it to fund the 250R project sadly.
Do you run a 6" front wheel if you do you should run a 3" off inter and outer. This will allow equal pressure all the way across your will and less tire shake. Do you have a camber caster on the quad? If so we set are cars at 9% to 11% with 1/8 toe out.
@MichaelSabo
4 жыл бұрын
Thank you for the info man; I've seen some other people running 6 inch wide front wheela and wasnt sure if it was a typo. These front rims are 10x5(4+1)
@250race
4 жыл бұрын
@@MichaelSabo That what us guys run on are 250 and 600 micro sprints You're running a 10inc wide front rim?
@250race
4 жыл бұрын
Buy a set off non bead lock rim 10" 3"3" off weld wheels I think they are $88 use soap when setting the bead. It should set with 10 to 15 psi. I mounted over 300 of these tires
Hi my name is Pete I just got into spots quads , I have been riding dirt bike for ever, and I was wondering if you have made a video on tire size to rim size , or can give me some info on how to match tier size to rim size. Hope this makes sense. Thanks
@conniestevenson226
2 жыл бұрын
Try to have the rim narrower then the tire by two or 3 inches if you can. But depends on what your doing.
Damn those wheels are pretty trick bro
Watched the whole video and you didn't show me how to mount a wheel on a rim🤔. But you did mount the tire on the rim good. Great video tho bud.
@MichaelSabo
4 жыл бұрын
Haha, thanks for watching the video in its entirety; the second part of the video will be up next week where I show mounting the OMF
@anthonymechling1434
4 жыл бұрын
@@MichaelSabo Hell yeah bro I'm from NE Ohio I know the history of the 250r can't wait to see this one done. I know it's gonna be a beauty. Keep up the good work...
@MichaelSabo
4 жыл бұрын
@@anthonymechling1434 thanks again man! 🤘
What size rim and tire, please?
Were is your Banshee now-a-days??
@MichaelSabo
4 жыл бұрын
In storage; she will be back
Banshee vs 250r
I don’t think it wasn’t centered i think it just wasn’t balanced
@MichaelSabo
4 жыл бұрын
It's possible.
@74elsinore
4 жыл бұрын
I agree
@conniestevenson226
2 жыл бұрын
Tire heights are not exactly equal either. Especially with cheap tires.some have bulges at random spots also.dragster racers even measure new tires and cut them to exact same heights since they are usually are not and have random bulges or high spots on brand new tires.over inflating to seat bead can supposedly cause bulges as well
The way I see it, is the 250r or banshee won’t make enough hp to spin those on the wheel imo. But smooth with the lip would be good on the omf. Be a MF to seal up if they leak, the wheels look bad ass.
@MichaelSabo
4 жыл бұрын
I kind of agree that they're not going to make enough power to spin the tire on the rim, especially on dirt. But if you go to the track, pros are running beadlocks so there has to be a reason, something maybe I'm un-aware of.
@barkus921
4 жыл бұрын
Michael Sabo absolutely, thinkin of how you’d be spinning the tires. And flyin through the air probably be a bit different now that I think of it lol.
@gompie250
4 жыл бұрын
@@MichaelSabo you mentioned it in your video yourself, low air pressure and high speed cornering will make it pop right off ;)
@MichaelSabo
4 жыл бұрын
@@gompie250 that makes a lot of sense; high speed cornering. Honestly wasnt thinking of that at the time. Excellent point!
@conniestevenson226
2 жыл бұрын
Its more for keeping bead on tire from side pressures like a rock or hard fast turns with low air pressure
When are you gonna start building
@MichaelSabo
4 жыл бұрын
Once all of the parts get here; hoping within 2 weeks; everything is ordered.
You need to balance wheels when you go 100
scratch! @6:54
First
@MichaelSabo
4 жыл бұрын
🤘👊
Shouldn't start the video saying GD but liked everything else
@MichaelSabo
4 жыл бұрын
Thank you man. And I do not mean to offend anyone; I appreciate you're feedback.
Lol
250$ each????
@lucky7thejeep695
8 ай бұрын
400 per wheel but they’re so worth it. I work for omf tho so I’m biased
So you'll bleep out one swear word, but not GD? I'm not going to try and pull a religious rant on you, but have some class man.
@MichaelSabo
4 жыл бұрын
Lmao. Don't be gettin triggered over there bro; just words.