New Trick ATV Parts and Why I cut my Skid Plate Off... | Project 250R Part 8
Автокөліктер мен көлік құралдары
#atv #quad #racing
New Trick ATV Parts and Why I cut my Skid Plate Off... | Project 250R Part 8
Check out Nelson Precision MFG! They make top notch 250R and firearms parts.
Web: www.nelsonprecisionmfg.com
Instagram: @nelson_precision_mfg
Facebook: @nelsonprecisionmfg
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
Other Music is as follows...
Пікірлер: 124
Thank you for watching my video 🤘 Make sure to check out NPM @nelson_precision_mfg and send your quads and bikes to @michaelsabo350 for Bike of The Week 🤘🤘🤘 Oh yea... you all ROCK 🤘👊
@867diesel
4 жыл бұрын
dude those billet parts are so fine . their going to pop on any 250r . id love to get some bling on my R
@marcruales8050
4 жыл бұрын
You don’t need to reweld thos mounts on. Just used a unbolt.
@andrewsmith2371
4 жыл бұрын
How do I send bike of the week pics?
@harryareola3656
4 жыл бұрын
@@marcruales8050 Do you mean U-bolt?
2 vintage makes my head hurt. this is better
@bmstone2004
4 жыл бұрын
Me to Im not trying to be a ass hole but there idiots imo
@theclubhouse1209
4 жыл бұрын
yeah they are a couple of goofs.
@moto_tech_braap_itout9852
4 жыл бұрын
Yea he is a jack ass , Michael is better
@chadcaudill509
4 жыл бұрын
BTW...from the outside looking in...Bunch of Hatin Trolls...but yet all y'all watch every video 2vintage post....This dude is Building Dope high end machines... 2vintage flips craigslist bikes...He just bought a nice built 250r tho ...So you dudes are just a ball of negativity n envy....get a life instead of knocking people that are doing something!!
@neal24v29
4 жыл бұрын
Chad Caudill his 250R isn’t even nice 😂
Its your build you do what you want but ya i think a skid plate is a good thing when it protects the the engine witch aint cheap
Mike your a great guy who cares what those low life’s have to say, keep up the great work this bike is gonna look SICK👍
@MichaelSabo
4 жыл бұрын
Thank you brother; means a lot 👊
Good stuff Mike! Shes gunna shape into an amazing machine man 👊🤙
Hey bro im going to make a recommendation to you...a really good one. Dont weld the tabs back on. My buddy Glenn Turner runs a company called Xplicit Racing. He sells his PRO Ballistic skids and the come with mounting hardware. You dont need your stock skid mounts for the plate. I can send you a link on instagram to the skud plate if you want. He makes em for all year 250r's and all colors. I run one on my 400 and its absolutely bulletproof
@DavidJohnson-ri2on
4 жыл бұрын
I got that skid plate for my outlaw banshee..very nice skid plate and the clamps are amazing.
@OperatorASF
4 жыл бұрын
@@DavidJohnson-ri2on it is man! I love mine it handles the abuse! He can also get the Campbell Race Fabrication skid plate. That thing is even more badass
@OperatorASF
4 жыл бұрын
@@DavidJohnson-ri2on A lot of The Times, the only time you really need the factory skid plate mounts is for an OEM skid plate
@willie71184
4 жыл бұрын
Yes the polyurethane are way better
Going to place me an order with NPM after watching this. High quality stuff
Love your patriotism with flag design, thanks.
If you are worried about weight on the skids take a note from us 4x4 guys and do UHMW plastic skid plate. Glad to see ya changed your mind. At least to protect the investment you are making even if you don't plan on thrashing it. It's easier/cheaper to swap a thrash piece of metal (or plastic) than to have the frame refinished and or repair a cracked case.
@motofarmmx2430
4 жыл бұрын
+1 on the plastic skids. I had a former pro national gncc bike and it had the plastic skids. Imo superior to aluminum they glide over mud as opposed to aluminum getting hung up plus they're lighter.
@radarhonda199
4 жыл бұрын
Pro Ballistic makes an awesome 250R poly skid...love mine!!
Lot of nice products, look forward to seeing this build proceed
I remember when everyone was running turf tamers custom grooved rear tires with Riken radials in the front, it was a really good setup for mx.
@MichaelSabo
4 жыл бұрын
I almost went with turf tammers!
NPM makes quality stuff. He is a Gun parts manufacturer that also loves 250r's. I have his rear brake reservoir. Its a very high quality product!
back in the day i wanted all nacs racing billet and graphics kit on blue fenders with a dark candy apple frame with chrome suspension
How are you not bigger on KZread it baffles me you make good videos, you know what your doing and saying, you put a lot of work and time and money into your videos you should be in the mills subs by now, people need to share your vids because you definitely deserve it 💯
Bro just do what you want don’t listen to the haters
Loved the hole shot mxr6 tires. Great they are still being made. Suprised no pros run them. I felt they had the best traction in all situations even when worn
Excited to see how this build is coming along keep it up
I just started watching this build. For 3k and as nice as it is that's what they go for around my area. I like what you do. I'm a little bit of a purest and would be hard pressed to cut tabs. When you have a vision you just got to go with it. RADASS wheeler.
cheers mate, good decisions was made IMO. gl with the build.
I think ur doing fine the quad is gonna turn out awesome
Rpm dominator axels are the best of had one on my banshee for 10+ years and still straight and clean looking Best Buy for your 250r
Great job...
Nice choice on the bead locks.
Yo I love your bike build vids bro I have a 2004 Honda trx450r that blew up about 5 months ago and I decided to completely rebuild the entire bike the way I want it and it’s finally about to be finished and I’ve had a lot of problems so far but it’s worth it good luck bro 🤙
I just submitted my bike of the week! Also I can’t wait to see this bike come together
Mike. This is going to be an excellent 250R.. Great Job... Jealous..
Looking good Mike. I have been running the emig lock ons on my yz450. Lock on's are decent I think too many people hype them up. They cost more and are essentially just a grip glued onto tubes. Basically if you're not good at putting regular grips on or wiring them up they're good. They're a little thicker than a normal grip because of the tube. I've actually cracked and broke them and they become sharp and somewhat dangerous. As far as a quad with a thumb throttle I can see no real downfall in performance but with a twist throttle i think a nice throttle tube with a bearing is the way to go smoother and pretty much unbreakable. Like I said I've been running them on a bike but I plan on going back to a nice throttle tube and regular grips in the future.
Definitely run a full frame skid, UHMW (composite)skids are a little lighter then alloy ones, gncc pros use them because they slide over rocks, logs , rough terrain easier. some even have frame hooks so no need to weld the tabs back on. great vid.
Good choice on putting your skid back on dude
Can wait to start put all together and to see project 250R to become a finished Quad ;)
I have a feeling this 250 is going to be epic.
Like how your going with the build! NPM makes good parts I would like to buy their rear master cylinder
Everyone is always a better mechanic in the comments lol
I just love billet parts😍🥰!!!
definitely gonna go order acouple shirts bro!
Don't sweat the skid plate thing dude, I can see you thinking either way especially depending on the type of track/riding. Great video as always.
Awesome vid and edits and filming and parts
I really like when you featured that Warrior on insta!
not thru the video yet but the title reminds me of that time I had an R and the axle was so old when I had to switch it out to change carrier bearing I couldnt get the axle nut off, nor could any of the shops, so I had to cut the axle lol. Percs of old dune quads lol
Videos clean as always 🔥
Nice video like always I'm in the process of building my 2nd banshee a 421 like yours a bit hard to get some information from America as I'm in Australia but I'll do it soon or later.. 🍻🍺🍻
You could check with DRW Weston does full poly skids...he might have them for the R
hey you tagged my comment lmao that's awesome
@250rtrxjunkie
4 жыл бұрын
😂😂😂😂😂😂🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️
@Zoonie
4 жыл бұрын
867diesel well you don’t have to be a dick. It’s called “Helpful criticism” not bashing the guy for doing something that’s his build.
@harryareola3656
4 жыл бұрын
867 diesel I bet you had a good laugh when he made a example out of your comment.
@867diesel
4 жыл бұрын
@@harryareola3656 yes I did have a good laugh I wasn't butt hurt by it just like he wasn't by mine . he made a great example out of it because hes putting the mounts back on . I may be an asshole but im an honest asshole and that's better than being the lips kissing the asshole lol
Mike skid plate. You might consider the TMD Poly skids. They are built insane tough and are light. Just something to think about. TAC just put some on his trx 450r and they look sick. Im getting some for my 400 and my 450. for next year. around 120 each.
I don’t really race, but I have an Lt250r and when I was looking for skids plates I found some pretty nice thick plastic ones by kased plates one eBay. They might be pretty nice for Mx cause they’re not as heavy as some of the other aluminum ones I’ve used for trail riding, just a thought.
We never ran skid plates in 90s
I️ met you at the wood years ago buddy . Had lots of questions cause I️ used to ride dirt bikes
I have those same wheels on my raptor front and back
Don't well those tabs back on just by a full frame skid like the raptor they make them that just clamp on
@harryareola3656
4 жыл бұрын
just as long as its plastic, those metal ones rattle and sound like sheet!
Sick shirt!!
You did great with 3k for your bike. It was a runner. Mostly what you find in my area for 2500 is completely clapped out.
You should do a build on a 400ex. For your next build. That would be awesome
A skid plate or atleast some chain alignment and rear disc protection is very important. But in florida's sand on a mx track a engine skid isnt important in my opinion.
Yup pics coming your way asap and my back story @P_reed02 Also once again the vid did not disappoint!!🤘🤘🤘🤘
i see Mike I like and comment... its automatic!!!
Bought a t shirt because I felt bad for you because you have to deal with so many idiots..... Longlivethefourtrax250r
Wassup Michael do you know the sizes of the bolts you used to take the crank out on that raptor 700
Ride on
Are you going to ice race it or river ride it when it’s finished?
-1 swing arm and +3+1 a arms is the go to for 250r mx or xc racing
@MichaelSabo
4 жыл бұрын
Hell yea man! That's what I'm rolling with 🤘
I would like to buy the coolant bottle tab you cut off frame.
Around when is the bike done ?
After modding your 250r frame are there mods you would make to a banshee frame? I need to change the lugs where foot pegs attach as they are stripped which is common prob.
@MichaelSabo
4 жыл бұрын
I actually did do mods to my Banshee frame before I painted it; but I didnt gusset it. I will build another Banshee in the future and that one I will definitely gusset!
first brother love the content
I suggest getting a full skid, it will protect the whole frame (powder coat).
@Jess-db3yf
4 жыл бұрын
No welding needed.
@MichaelSabo
4 жыл бұрын
Yes sir, full skid. The DRW one I'm using I'd does utilize the factory mounting tabs though.
Yesssss haha
I just finally found an 86 trx250r to build on my channel. I'm looking into npm parts for it. They look quality. How do you like them bro?
@MichaelSabo
Жыл бұрын
NPM is really good stuff. They focus on gun stuff and do limited runs of 250R parts but they're top tier. If you get to talking with them, let them know I sent you and they might be willing to do some one off stuff for you. It's been a minute since I've talked with them though.
@garagemcmatt
Жыл бұрын
@@MichaelSabo definitely will bro. I just spoke to motoblast the other day as well he is literally 20 mins from my house I have a truck load of stuff to get done. And of course I mentioned I heard about him from you.
Skid plate all day
to bad npm got slammed and no longer makes thier stuff. I've got a red npm new water pump cover..I was sposed to get a rear rezzie but who knows lost contact with them.
Let me know about your stock plastics.
people are always gonna have shit to say man. do what you do. it’s your stuff
Can you do a extended modded out Yamaha blaster
@MichaelSabo
4 жыл бұрын
In the future maybe; I might make a Blaster with the same color scheme as the Banshee
@jaydensmith4921
4 жыл бұрын
Michael Sabo that would be a nice bike
@jaydensmith4921
4 жыл бұрын
Michael Sabo do Yk any company that makes after market parts for a blaster I can’t find anything really besides Chinese stuff
they play destiny?
I think you should start a second channel for fitness. I have just gotten into lifting and you're pretty yoked and look like you know what you are doing.
Big up Michael, this build is gonna be the tits!
GBC tires
HAVE BUBBA DO YOUR MOTOR!!!!!!!
Do u get scammed on Ebay?
These tires are tough man i ride more on the streets and there fine after 2 months
@ronaldtartaglia4459
4 жыл бұрын
Riding on the streets? That makes sense
@anaickaube17
4 жыл бұрын
To get to where i want to go i need to and sometimes its far
Fuck them haters, but watching you buy all these 250r parts is making my wallet feel lighter lol.
Have Baldwin build the motor, you wont get a better build I promise.....
Who cares what the knuckleheads say in the comments lol most of the time it's people that don't know what the hell their talking about and they just want to feel smart.
the 2 dislikes are people made that you didn't tag their comments lmao
first
You need a skid plate, cutting those tabs was a rookie mistake
Too much talking hardly any videos or rebuild same with 2 vintage