Thank you for watching my video! Build videos are on the way soon; I know you're tired of these product videos lol; I am too.

@coreybrainard7653

2 жыл бұрын

Hey I'm in north west PA in erie I need advice on a build could u reach out to me if u have time

@minideluge

2 жыл бұрын

I like the product reviews just as much mane 🦾!

Bahahaha 2 vintage man you I was rolling on the floor

@MichaelSabo

4 жыл бұрын

Lol

Those beautiful machined bits you're putting on your quad are like jewels & bling for for blokes ay? Of course 150% functional, but while also being things of beauty. And what's up with that radiator? Phew such a nice thang! I was blown away by the Precision Racing gear & Elka shocks. You better promise to always wash this quad as soon as you get it home mmkay? But yeah, great to see what kinda quality kit is available out there, even if I can't afford them. Like aircraft quality. I don't get bored with your product videos Mike, because I get to see nearly a whole bike's worth of extra good parts, that are held together by over 600 nuts & bolts! Every bolt & part change you make is gonna change the result somehow, so who could get bored with learning that kinda stuff? There's a coupla things I'm not happy about though. Those ugly kindergarten warning stickers on your plastics. And I should really unsubscribe from this channel. I'm just not getting anything else done round here. I'm spending too much on home delivered dinners so I get more time to watch your channel. It's terrible!

Man this thing is gonna be so sick! Your not gonna want to touch the dirt with it 😅Cant wait to see more! 🤘

@MichaelSabo

4 жыл бұрын

Dude.... we are gonna shred this thing 🤘 (after the photo shoot of course)

@PeteHager

4 жыл бұрын

Michael Sabo man Idk if I could ride it! I would be too nervous 😆 we’ll cross that bridge when we get there!

Yes, some of the stuff I can kinda experience through the videos. I had bikes as a kid and teen but went without for over a decade until 2017when I got a 2003 ttr90 and a 09 klx140 kawi to practice low speed control cheaply. I took advantage of the lightness and forgiveness of them and practiced wheelies for dozens of hours each, want through them and sold in 2018. Finally for the first time this past fall I was able to get bikes over a grand, I got a 07 Yamaha ttr230, 14 Honda crf230, 13 Husqvarna WR250. I got all three in October and went through each of them with new tires, brakes, bearings, sprockets, chains, bars, levers on all and cycra pro bends on the husky plus full pipe w/spark arrested silencer so it could be taken anywhere, it's a beast and scary as hell... I love it, hopefully at the end of this year I can buy one to keep for a while!

Lol @2vintage I wouldn't even let that guy put air in my tires, h doesn't have a clue

@MichaelSabo

4 жыл бұрын

lmao

@Off-roadOperator9562

4 жыл бұрын

Lol so true the shit he says sometimes 😂🤣

@usmcchet1

4 жыл бұрын

Hey 2vintage boss seen just about all your vids they are great. But brother you get burnt sometimes to like that kX 125 the cr80. And another thing my boy like here buys new parts. You try to recycle old parts. Basically polishing a turd. You need to step up to his game.

@Nitrous_Busa

4 жыл бұрын

Everything he buys is trash and he post it to KZread like it's the greatest thing ever😬😂

Love the videos you inspired me to take a yfz 450 that was in boxes for 10 years and get it going again, keep up the great work 👍

Thanks for sharing your excitement for this build. Your getting some great products for this build. I just finished my 250r build with almost the exact same parts. I went with the 363 CEO cylinder with the LED 350G pipe and Lectron 40mm. Once you get to ride this badass quad your not gonna want to ride anything else. Thanks for taking the time to produce the videos, They’re great. Ride red and long live the R!

I cant wait to follow along with your build man i love everything ya got going on! Keep those 250’s ALIVE!

@MichaelSabo

4 жыл бұрын

Thank you for following man!

i cant wait to see you built the quad

Cant wait for the first rip...also it's also the best feeling pulling a part out of a box and throwing the box on the floor and staring at the part for 5 minutes...lol

@MichaelSabo

4 жыл бұрын

Hahaha, so true man; thank you for following the build.

Love the videos keep up the good work. Dont listen to the haters i love when you go into detail about the parts best quad channel on youtube!

Yes Michael keep up the amazing vids I love watching them. Every video I learn something new. I'v just finished watching the surprise quad from justin when he rolls up to your house, the KTM hybrid. I love it, I have a KTM 525XC and really struggling to find parts etc. Would you ever think of doing a ktm build

Man that DBC bolt kit is a game changer!

Wow mike! This build is going to be so insanely nice! Makes me want to get a 250R. I can’t wait for new videos. Been watching your vids for along time

Don’t apologise Michael !! your content is top notch it’s great to see all the products and hear your explanations as to why you choose a certain make or brand,of course some people can’t wait and just want it built now and see it ripping up the trails but just as many of us find the build part very helpful for building our Quads no matter the make or model. Keep up the good work mate Look forward to each week 👌

@MichaelSabo

4 жыл бұрын

Thanks so much for the feedback man! It means a lot to hear this! I appreciate you following the build and watching my videos!

Can’t wait to see this build. Really looking forward to it.

Great video, love unpacking videos of products

@MichaelSabo

4 жыл бұрын

Thank you for watching man!

That's a sweet lot of parts man! 🔥

"2 vintage" "just playing" i was rolling lol lol lol

I have elkas on my banshee. It is absurd how well they work especially coming from stock.

Man, I can't wait to see this thing finished!

Excellent product choices.

I appreciate the content.

Bro I wouldn't just be bummed out, I would be furious with those plastics.

It's gonna be so sweet man! Can't wait to see it rip

Hard on time! 😂😂😂

This build is awesome

Keep up good work bro stay grinding see u going far in KZread

Its going to get littt

Pretty cool. Definitely think you should have went with Elka’s in the front. Bummer about the plastics.

@MichaelSabo

4 жыл бұрын

Elkas are definitely great; the floats came in and look/feel to be the same quality; I'm excited to run them!

Awesome vid and edits and filming and parts

I died when you said dbc racing is a great number to prank call 💀💀

@MichaelSabo

4 жыл бұрын

Lmao

That radiator guard looks painfully heavy. Badass parts though cool video!

You’ll like them precision parts for sure!! That’s been some of the best investments I’ve made so far

Love it

That radiator guard looks awesome

Once again it's your bike and do what you want but I'd suggest to powder that rad cover a color and then rattle can the other two colors. Me I'd PC it blue and paint the red and white. That way you can touch up the lighter colors when you want to show it off.

Sick build man

@MichaelSabo

4 жыл бұрын

Thank you!

Hey Mike....parts buying and vendor relationships are a huge part of the business side that no one really sheds light on....like how you were talking about....mike from ATV galaxy....and GPI....no body wants to admit buying them but we all do....they are less the half of fluidyne and work great.....its funny man I know so many guys .az quad parts etc etc....you do this often enough. And when your looking...after awhile. It always says...a seller you've bought from in the listing....hopefully Maier or your vendor cuts you a deal on the plastics..I just got the clutch in mine this past weekend...the oem was pretty grooved up...so I found a hinson basket..inner and outer for 290....3 different sellers.....but its bargains like that ...that really make the value go up ...that's a 1000 dollar system...anyways take care man...this thing is gonna be sick...

@MichaelSabo

4 жыл бұрын

It's so true man; not much of this is talked about and the more companies I work with, the greater of an appreciation I have for customer service etc. Thank you for the feedback and for following my videos Kenny!

@brokebikemtb4448

4 жыл бұрын

@@MichaelSabo I sent you pictures of my bike on ig

A precision stabilizer changed my life

@MichaelSabo

4 жыл бұрын

Hoping it changes mine too

The rad cover pisses me off.. its missing a row of stripes.. only has 11 should be 13

@jameshatfield6814

4 жыл бұрын

David Hill quit bitching

@teamwoodswarriorsracing2004

4 жыл бұрын

You ever think the size and dimensions make a difference......🤔 lmao

@ronaldtartaglia4459

4 жыл бұрын

Maybe because two of the original colonies, say Connecticut and Massachusetts are totally communist now so maybe it's a little forward-thinking on behalf of the guy who built the thing. because eventually the whole East Coast will be communists....🤣

@teamwoodswarriorsracing2004

4 жыл бұрын

@@motododo4626 i think you took the entire comment out of context

NIce stuff. Super impressed with the precision stuff. I run fasst flexx bars and am really interested to hear what you think once you jump on them. Dude i would definitely reach out them about those plastics. You paid good money so hell with the heat gun. I would insist a new set.

Thubs up towards your career

Those are my dream A Arms! Roll design are the shit!! All awesome parts brother!

@ronaldtartaglia4459

4 жыл бұрын

My dream a arms are stock. I'm a simple man B.S.R..

@MichaelSabo

4 жыл бұрын

My dream arms too man! Good taste. Your R is coming out awesome too dude

@ronaldtartaglia4459

4 жыл бұрын

@@MichaelSabo check it out on my Instagram it's bone stock man. But now to replace some of the stuff with stock stuff is impossible. I mean there's guys who want seven grand for a full set of stock fenders it's insane

I can’t wait bro I came for the raptor videos but I am liking the 250r so far.

"you guys probably think I'm a weirdo" 😂😂😂 it's going to be an awesome build.

@ronaldtartaglia4459

4 жыл бұрын

Only because you ride a gsxr. 😉

Niceeee

Cant wait bro

@MichaelSabo

4 жыл бұрын

Thank you for the support man!

GREAT VIDEO brother keep them up. Please keep your day job as a fork lift mech. Sooner or later this video thing is going to die out.

I have a precision elite and let me tell you it is every bit as awesome as it looks.

Ya ive had prob after prob with maier plastics not lining up hole drilled in wrong spots miss shaped ended up buying oem plastics an had no probs But like watching ur vids makes me want to build up my shee

Weld a peice of mesh behind the stripes on the flag rocks will go through there

🔥🔥👍🏼⛽🏁

Idk if it’s too flashy, but it would look pretty cool if you spray painted the stripes on the radiator behind the guard.

You have provoked me to such a state of jelousy!

Love the precision elite stabilizers been running then since just the normal one was out then upgraded to the pro and now the elites! I will have to disagree w ya on the clamps i actually started out w those 1st years ago and i race cross country (GNCC/WNYOA) then switched to the flex bars and for me the flex bars are just better but everyone is different! Great products though either way i just ordered a new elite for my build yesterday! What fox shocks are you getting evols? Cant wait to see this build get under way!

@MichaelSabo

4 жыл бұрын

Thank you for watching man! You're the first person I've heard from that prefers flexx that has tried both; I've ridden flexx and really liked them so it will be interesting to see. Shocks are the Float 3 Evol RC2's!

@ononewheel7

4 жыл бұрын

Michael Sabo nice love the fox floats but w racing they require service 2/3 times a year which adds up i recently switch to fox custom springers from BNR MOTORSPORTS my 1st time back on spring shocks in a long long time but i am really liking these just ordered a second set as well this week! I actually started out on elkas had a couple sets of them then ran exits for a while then it was fox for the last 4-5 years! If you need help tuning the fox’s w air hit me up i know those shocks pretty well!

“2vintage” Im dead🤣🤣🤣

Ccp isn't making them right now. I have one and it's very good just a little less adjustment. My brother has the precision I can tell a diffrence but not by much. Your picking some nice performance pieces for sure.

When the sad music intro started playing as u were stalking about ur bent plastics had me dieing laughing , take the heat gun to it should be fine.... the build will look great ....

@MichaelSabo

4 жыл бұрын

Hahaha, thank you man; yes I plan to hit it with the heat gun 🤘

Ahhhhhh, one less backwards ugly hood. I keep re-watching the video for that. I get the same feeling when I re-watch the Atlanta/ New England Super Bowl when they came from behind and won. Such a sweet victory, one less brutal, nasty, snout-ly ugly backwards Hood. A small victory. Just for that I think I'm going to buy another shirt from you. 28 - 3 Longlivethefourtrax250rwithstocklookinghoods.😀

Swingarm, a arms, and nerf bars better be powdercoated flat black like that or I'll be pissed! Man thatll look good in that color with the tan frame!

You should do a kids /small adult build ,maybe a raptor 125😏 chassis with yz 125 motor , that would be unreal

Hey bud those plastics are old it takes a lot more than shipping from Cali to do that. I can assure you right now that they sat on a shelf for at least three years.

Michael, I want to send you pics of my modified left hand throttle and front brake conversion on my bike. I have cerebral palsy down my right side, it doesnt stop me and shouldnt stop others. I also have a fee vids of me on my old quad which was also converted.

My plastics came very poorly packaged to man. They were poking out of the box when i received them but luckily they were in good shape. If u find the rectangular rubber bumpers for under the rear plastics send me a message please! The maeirs and the oems dont work together. The factorys are closer together and maeir spreads the holes out

I wouldn’t let 2vintage even look at my bike. It might start sputtering and smoking.

That same portion of the rear plastics where yours are bent were too long on the maier plastics I bought. Overlaps the front plastics by about 3/4 of an inch. Gonna try to trim them. For the price you pay for the plastics id expect them to be ready to go and not need any extra adjustments

@MichaelSabo

4 жыл бұрын

Whoa; just make sure you have everything lined up right before you trim them; I haven't heard of Maiers being cut too long before.

@RJIVHALO

4 жыл бұрын

They were only maybe a quarter inch off. Trimmed them and everything fits perfect now. Was very nervous

? for you on the maier full fronts what do you do with frame body mount at the front of the gas tank?

I have perscison clamps. I have carpal tunnel and with those I can ride all day

Id take off the warning stickers......u think itll keep up with the banshee

What happened to the banshee and the raptor?

men you are big inspiration I am 14 year old and I am trying to build my 250r is way to expensive for me but I am trying getting those cheap use part 🤣🤷‍♂️

If it does overheat then you could either switch to engine ice or Evans I think it’s called used it on my 450r for motocross hasn’t let me down

@MichaelSabo

4 жыл бұрын

Thank you for the tips man! I'll be running a temp gauge so I'll be safe if it does end up overheating

Same thing happened to my maier plastics

For the radiator guard you should do a red to blue fade

Hey Michael, where can I get a engine for my 1997 Banshee 350? Just stock engine.

Greetings from Russia!

@MichaelSabo

4 жыл бұрын

Greetings!

Let's get it done💵💳💲💉🥳🥳🥳💨💨😂😂😂

Why run two different brands of shocks?

What are you going to do for a pipe with that CEO cylinder ?

Just ordered stage 5 from elka. What was your lead time? order to door?

Whats up

Air flow will be fine, blows it up at the dunes

Michael are you going to race this quad on the track, or is it going to be a show quad? Love the videos BTW. I hope you record the whole quad Assembly....

@MichaelSabo

4 жыл бұрын

Hey Roy! Thanks for following the build. I plan to ride this quad at MX tracks on practice days, not sure I will actually enter a race with it.

@ononewheel7

4 жыл бұрын

Michael Sabo come on don’t be scared haha!

Look really good if you grind it those welds down. Not the best beads on those welds not horrible either

Howd the precision stabilizer compare to the gpr?

@MichaelSabo

8 ай бұрын

I would say they're pretty much the same in feel. I don't race or ride super hard though - those would be the guys to ask.

What's up bro does the roll design A arms fit stock frames

Michael where did you buy your desert sand race fenders ?

does dbr racing have a full bolt kit for trx250ex ? 2007 @Michael Sabo

Nice you were able to get something from ESR. I had been emailing them for the last 4 months to get a 370 Engine Builder cylinder and got maybe 2 replies with zero info on what I asked about. I ended up going with a CP Industries 82mm Lynx Cylinder instead. I understand all the issues ESR is having with machining but sucks when i couldn't even get replies about anything I was asking about. Nice build though! Can't wait to see it start coming together!

Powder coat the radiator guard blue and red like our flag. Ship it to me, I'll do it.

I still think the gold plated zinc oem bolts are nicer looking

Definitely picking up a nice bike shirt. My dirtbike riding buddies give me shit for calling by “quad” a bike😂

Maybe if you go fast enough the plastics will bend back where they got messed up

Get aftermarket engine cases

660 next .....

A smooth front hood..... Thank god.... Victory against those stupid backwards hoods......

Your using Cameron Neilma lingo you must be watching him more?

Check your parts from esr i got a set of front motor mounts from there a year ago and both motor mounts are the right side mounts i sent emails with no responses dude is a hard person to get ahold of just a heads up sweet build im building the same quad.