Properly Mount Your Beadlocks! Sickest setup on a quad | Project 250R Part 11
Автокөліктер мен көлік құралдары
#atv #offroad #beadlock
Properly Mount Your Beadlocks! Sickest setup on a quad | Project 250R Part 11
If you don't follow the proper procedure when mounting up your beadlock wheels, you might have some problems. Here is a guide to mounting sport ATV tires on OMF beadlock wheels. This procedure will apply to pretty much any wheel, however, the amount of torque you need and using shims may vary from wheel to wheel.
You can buy OMF wheels for just about any machine here... HSDRacing.com. If you don't see your wheel on there, call them and they will walk you through it 🤘
Milwaukee Impact Driver - amzn.to/32n5wT9
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
Пікірлер: 97
“It might seem like a little pain in the ass but so are women, and we still like those” AND YOO WTF THE ENDING 😂🙂😳 ur twin
@MichaelSabo
4 жыл бұрын
😂😂😂
Rounded side down my man. Keeps it from marring your loot!
Lmao.... i was so shocked when it was Mike that came in under the garage door haha
man as im rebuilding / building another 250r im coming back and watching all of these videos . after a few years and many builds of mine and your own , i bet you could be a championship bike builder / mechanic . everything you build is on point and every detail is carefully looked over and thats what winning a championship takes as a mechanic .
Remind me of build season every winter for the then years I raced Mx. A lot of work, but so much fun.
I love your channel. Makes me feel like I’m a part of the show. I love working on my bikes as well.
I’m ready to see that frame get powder coated!! Been following the build and it’s looking badass so far
I loved the holeshots and they are amazing with plenty grips from nice and sunf and duro tire looks very simalir in most sizes
super clean dinnerly picking those up for the banshee
Bro anything that comes to mind. You have it or I’ve seen u take the time to highlight it while doing something in the area of what I’m looking to have answered. I swear I probably have a video on picking your nose. And I’m sure I’ll learn something new hahahaha. Good 💩!! Love the channel!!
These wheels look insane
them yellow letters look sweet . and good looking welds . I cant wait to see the first ride video
@MichaelSabo
4 жыл бұрын
Thank you brother 🤘
Might just have the next quad of the month for you!👌
It's important to grip your torque wrench at the end where the grip is; if you use it the way I do in this video you will slightly over torque your bolts. Thank you for the people that reached out and corrected me; I was unaware of this 🤘 If you could run any beadlock on your bike... what would you choose 🤔 Thank you so much and all you guys and gals ROCK!!! 🤘
@machines1431
4 жыл бұрын
Michael Sabo you need to hold the torque all the way at the end
@MichaelSabo
4 жыл бұрын
@James Manzie haha, good taste man
@MichaelSabo
4 жыл бұрын
@@machines1431 just learned this and researched it through snapon. Thank you for the info!! You are correct
@claudeperron780
4 жыл бұрын
Someone will have to explain that to me. It make zero sense. You set the torque, not the force!! If the wrench is set to 'clic' at 10 ft*lb, you, doing it by pushing 1lb at 10inchs or pushing 2lbs at 5inchs is the same torque!! The only thing is that you will have to push harder.
@j.need4qlife483
2 жыл бұрын
Claude, you are correct. Holding the torque wrench at the very end add more leverage to make it easier to reach the set torque value. Granted, holding the torque wrench lower down the grip will require more effort which if your struggling to reach the desired torque value.
Keep up the good work love all the videos brother!
@MichaelSabo
4 жыл бұрын
Thank you for watching bro!
Very nice weld job
great vid mike, definitely buying one of those shirts!!
@MichaelSabo
4 жыл бұрын
Thank you Tyler; I appreciate it!
Got to get some
The end of the video tho 😂😂😂
My front left is deflating I hope I just gotta maintenance it and there isn’t a hole I got some hipher beadlocks
Mxr6 tires are dope that's what I putting on my 450r
@MichaelSabo
4 жыл бұрын
I cant wait to rip them on loose dirt!!!
Nice I like Miller but that little Lincoln ain’t bad
That was hilarious at end lol women. Thank you bro im officially a subscriber
Anyone can do it, if your arms are the size of your thigh lmaoo🤣🤣🤣
@MichaelSabo
4 жыл бұрын
Lmao, thank you man 💪
Rounded side down bro I think is better won’t scratch the ring as much with the washers sharper edge… 🤘🏼
Love the content man 🤙 #GOODCONTENTGANG
@MichaelSabo
4 жыл бұрын
Thank you brother!!
you got any recommendations for the bolt patters and tire sizing? what is the best?
Looking to run the exact same wheels on my Raptor but with a different tire
No anti seize on the beadlock bolts?? Killer looking wheels.
I appreciate how OCD you are haha makes for good content brotha
I’m in the process of mounting beadlocks, but I’m confused about something. After the ring is put on, how does the bead of the tire get seated on the ring side? You get the tire “over” the outer edge of the wheel.
One good way to set the tire bead without over inflating is bouncing it on the ground. Be careful though, it might go sky high if you aren’t holding it tight.
@MichaelSabo
4 жыл бұрын
Yes, a good technique indeed!
Hey Mike - rebuilding a 90’s Polaris Scrambler and am having a hard time finding beadlocock wheels for the rear. Know of any companies that make a 4x4 bolt pattern bead lock wheel?
Goldspeeds are really good that’s what I run on my yfz
@MichaelSabo
4 жыл бұрын
Yes I hear great stuff about them; I was very close to running them
My OCD makes me wish u put a washer on the other side of the frame Lol
@MichaelSabo
4 жыл бұрын
Contemplating.... might do it
@herbphene3357
4 жыл бұрын
Do both sides to all the lower mounts
@thebennetts1307
2 жыл бұрын
Then the a arm wouldn't fit inside the two mounts? Duh lol
@darronmiller9126
2 жыл бұрын
@@thebennetts1307 nobody is talk n about changing the id. And you use custom built to your needs spacers for a himes joint a arm, if you do change the Id for repair
What air pressure do you run on those?
how can i get these for a yfz450r 2022 having a little trouble finding it the beadlock and rock out fronts
What exact rubber tires are they please??size and make
Invest in a tig your welding clean material most of the time anyways
Where did you get the tires and what size?
There’s a spray can called “ anti spatter “ it should help you out on the welds 👍🏻
@MichaelSabo
4 жыл бұрын
Ahh, I've seen it but never tried. Thank you for the info man!
@jeffh6971
4 жыл бұрын
Turn your wire speed down.
Mike tire balls or tire blocks? Your opinion
Shoulda tightened a ratchet strap over the tire while settingthe bead. You might have balooned them even though you cant see it if you ride a wheelie even if psi is the same it could push to one side
@MichaelSabo
4 жыл бұрын
Hopefully that didnt happen; I went to 29 pounds. If you go crazy with the PSI I could see that happening though.
“I kinda feel like you should use a torque wrench” 🤣
Great video! Who are you using for a music service?
@MichaelSabo
4 жыл бұрын
Thank you bro; I use epidemic sound for most of my tracks 🤘
@ononewheel7
4 жыл бұрын
Michael Sabo thanks for the reply i think I’m about ready to try a music service! I keep getting copyright claims on music from youtube 😡
@MichaelSabo
4 жыл бұрын
@@ononewheel7 oh dude.. it's well worth the 15 bucks a month. I have not once received a copyright claim since using epidemic. And no problem man!
I need to get me a set🧐💲💲
@867diesel
4 жыл бұрын
those would look sweet on the pop top
@250rtrxjunkie
4 жыл бұрын
@@867diesel They would.🥶🤑👍🏻
Have a few aftermarket 250r frame's also forsale maybe it could be the one for your biuld please let me know I am willing to send videos and pictures of my whole 250r collection one of the biggest on the east coast l promise you
I like how you are teaching to torque your bolts... but... you are using the torque wrench incorrectly.. you need to pull on it from the end where the knurled grips are.. that’s how they are calibrated.. as you did it.. even though it clicks, it’s only reading the torque from where your hand is placed, so they are actually overtorqued .. been a heavy equipment mechanic for 30 years, just trying to help you out.. keep bringing the great videos!
@MichaelSabo
4 жыл бұрын
Dude, I've actually never heard of this. I would think the torque at the socket is the same no matter where the wrench is gripped; just more or less difficult for the person wrenching. I appreciate the info man, I learn something new from my subscribers all the time; definitely looking into this; thank you.
@MichaelSabo
4 жыл бұрын
Just went to snapon and did my research and you are indeed correct; thank you again for correcting me 🤘
@Masaauger
4 жыл бұрын
Michael Sabo No problem.. that’s how we all learn..thanks for the reply
My holeshots took 70psi on my 8 inch itp rims
@MichaelSabo
4 жыл бұрын
Are you serious? That's crazy haha
@superwilcox9026
4 жыл бұрын
Use waterproof grease and will pop by 30 or so psi.
@anaickaube17
4 жыл бұрын
I dont recommend using grease because it doesnt dry like bead lube or dish soap so on a bike powerful enough the wheel could slip in the tire been there done that haha
@MichaelSabo
4 жыл бұрын
@@anaickaube17 i would agree with that
Dude have you seen the price of c25 or argon or oxygen and acetylene tanks new. Bloody hell the gas is cheap the tanks are anywhere from $250 to $400 depending on size. This is double the price what they use to be thanks to the tariffs . I would have kept that cylinder.
@MichaelSabo
4 жыл бұрын
Realistically in my area, they go for 2-250 new. 75-125 used is fair in my opinion. Is what it is, sold it in 30 minutes; convenience pays lol
Whaaaaat. I don’t know how you can get new plastics in the mail and not even open the box!!! 🙈
@MichaelSabo
4 жыл бұрын
Dude... it's hard. I like to wait to open everything on camera so the reaction is genuine.
@shaun88R
4 жыл бұрын
Gotta do it for the peeps I guess. You’re a true professional! 😜👍👍
@MichaelSabo
4 жыл бұрын
@@shaun88R haha, thank you man
Look at bvc trikes amazing builds
@MichaelSabo
4 жыл бұрын
I follow them; they do amazing work
is that your evil twin or the good one?
@MichaelSabo
4 жыл бұрын
Yo he is evil as FUCK!!
Offroad Works it might seem like a pain in the ass but so are women and we still like those”. Pause video, click suscribe & like button . Thanks for the good laugh and great video
A cheap torque wrench is not better than no torque wrench😂
Hey Mike name is Colby would like to get ahold of you I have a few aftermarket 250rs lobos legars and some other sweet stuff you might want to check out how can I get ahold of you on a personal basis?