The uno protect was better option my guy 100%

I would just leave the polish and sealant bro the wax is optional tbh cause the sealant will replace the wax and you save time as well

You should add some sort of storage to the top of the cargo van so you can keep your pop up tent on you always!

@martinez5195

2 жыл бұрын

Exactly what I was thinking bro.

@HuntersMobileDetailing

2 жыл бұрын

good idea have to figure that out

@atlfat9682

2 жыл бұрын

@@HuntersMobileDetailing all u need is a small latter rack or sum type of bike rack boom!! Problem solved🙌💪💯

Hey ya boy came back!!! That he got his stitch sorted out and is back with the Hunter fam! Shoutout to Reyes at 12:52 - that me baby. But I drive a Camry. Got a job this morning baby. We growing!

What’s going Wayne? Good to see your brother back out on the grind with you. Everything that you did to that Toyota Camry wad on point. When it came down to end of the Detail on what to apply. I myself. World suggest the 1 And Done by Turtle Wax. Just keeping it 💯. I like the way you grind. And I watch all of your videos. Continue to allow GOD to use you my brother. 👍🏾👍🏾

Love your videos man I love watching them

Daaaaang! Stepped it up with that big boi polisher! I see you!

I've been detailing for 28 years and I believe the paint pops more when you do the two steps individually. Beadmaker is the bomb as well to seal it and give it that extra pop

@HuntersMobileDetailing

2 жыл бұрын

as a 3rd over wax??

@klasseact6663

2 жыл бұрын

Try Dream Maker for more P O P❗❗

@gilbertnavarez3247

2 жыл бұрын

@@HuntersMobileDetailing as a sealer in top of the wax for durability for an extra fee of $50 - $100 it's an up sale. No money if they like it for good clients use it instead of a wax.

@verduzcoautodetailing3183

2 жыл бұрын

@@gilbertnavarez3247 how do u use bead maker on black paint i been hearing it leaves hase and its hard to remove

all in one for quick jobs and customers who dont want to pay a lot. Also the damage from traditional clay bars should be fixed with polishing but these newer clay towels, gloves, sponges are way less aggressive and don't always need to polish after if used with good clay lubricants. For speed and durability I feel like spray waxes are better

Uno protect on a medium foam pad will give you some cut and the polymer sealant gives really good gloss and 3 months protection.Just has to be left to cure for 20 mins. I go round the entire car then start buffing from where I started polishing 👍🏻

Separate steps always give you the best results. Sonax perfect finish on not to bad paint, IPA wipe and your favorite protection.

Dude. Awesome work. Awesome videos. Thanks!

On black cars after you clay you always have to come in with a machine polish. A lot of these new polishes have some kind of SI02 polymer sealant in it. If you want ultimate gloss on a car paint you can use a glaze or carnauba wax. Or you can take my word for it and use turtle wax seal n shine

2 step polish and wax is better in my opinion you do beautiful work hunter and you are blessed to have your brother work with you.

The last coat is 🔥. That is what I use every time... no need to wax ever again. Time saver and comes out a million times better than waxing!

@derice599

2 жыл бұрын

DerTuer

Tip: After applying product to the buffer pad, press the pad around (already attached to the machine), in the area you are going to work instead of just starting from a single spot and spreading it from there. Allows equal lubrication/product in the area.Not as harsh to the paint.

@jujubeesknees4498

2 жыл бұрын

Pad conditioner too

@tristarO1

2 жыл бұрын

@@jujubeesknees4498 makes no scene

@jujubeesknees4498

2 жыл бұрын

@@tristarO1 makes no scene? You mean sense? Take a polishing class. Get certified. They'll show you why it makes sense.

@JP-ro2yi

2 жыл бұрын

Yeah Scott with dallas paint correction is the best teacher I've ever seen and he does that.

@JP-ro2yi

2 жыл бұрын

The car still looks incredible. He did a great job.

Also-you can use P&S beadmaker to remove the Uno amd get more pop

just cuz he don't got all the equipment doesn't make him not a detailer dropping. gems

Can't stop re watching this video because im still trying to learn the correct procedure on doing a good clay bar and wax. like how you got in depth with your steps in this video

@JonathanORear

2 жыл бұрын

Would love that Hunter

I really enjoy all of your videos an honestly you've inspired me to take that leap of faith. I'm taking all the knowledge from you an applying down here in the south. I wish the best bro. Keep grinding. God willing we'll be able to link.

@HuntersMobileDetailing

2 жыл бұрын

THATS WHAT I LOVE TO HEAR! MAY GOD CONTINUE TO BLESS YOU AND YOUR BUSINESS

Nice job my brother. I do it on a smaller level but love watching detailing videos. Keep it up.

The one step is " the jack of all trades and master of none " .. polish and use TURTLE WAX GRAPHENE spray protection

@CaliVapor

2 жыл бұрын

Agreed, it works great as a base coat, and can go on just about anything (except places you don’t want slippery like the door foot sills)... then I use graphene to the max wax for the topper and plan to maintain with flex wax pro. Lasted more than 6 months already.

What you are doing there Wayne is perfectly fine...Your longest lasting protection as a base...Instead of the liquid wax you may want try an si02 spray sealant/wax as a topper. For example, Griot's Garage 3 in 1 Ceramic Spray Wax is a very good...Keep up the good work!

Very informational video! Keep goin dawg💪🏿

I’m a detailer in San Antonio TX I do a one step polish with that exact same uno protect and I use bead maker to take it off, the gloss and slickness it leaves behind is awesome, this combination also protects the paint

@verduzcoautodetailing3183

2 жыл бұрын

How much you usually charge for that boss man?

Learning this is actually helping me day after day when I'm out in the field with my cousin... I can't help it i look over a car forever and it makes my fam a lil mad lol

@guillermososa9454

2 жыл бұрын

Don’t worry bro used to be the same way. My sister cleans like a damn crazy person and she moves too quick for me so she be getting pissed sometimes 😂

I agree it's not the equipment it's the heart for the game

I wish you the best of luck out there and your pricing is VERY fair👍👍

Looking from Trinidad Nice work really wish to grow like you

A brush works great for getting wax out of the cracks.. keep up the great work 💯

I can’t wait to get out there and do thos

I can highly recommend Koch Chemie P6.01 one cut and finish, best one step polish I know of, it even take out swirls so its not just a filler polish.

That rupes one step shines up really nice I really enjoy using

This may be unpopular, but I've tried it.... Clay Bar windshields to remove contaminants. It's amazing what all will come out

Using a finishing polish is something for sticky/soft paint, in particular with black paints. If you offer a one step you better work with polishes with diminishing abrasive tecnology, as you cut the abrasives become smaller and smaller giving you a better finish. Use always with a medium pad or yellow wool from rupes if you want more cutting without sacrificing the finish. Examples are Sonax cut and finish, menzerna 2500, rupes DA fine and m205 ( megs use smat tecnology ). There are lots of medium polishes and the level is so high that it comes to personal preference. Have a good day from Italy 🇮🇹 For the rupes AIO it's a great filler, you can do a car in one hour, its cutting is not as a medium, but you can remove the oxidization from the paint. Works great with wool pads, but the wax tends to clog every pad you use. I think a medium polish and a quick detailer to remove the polish and give protection is a better option

Uno protect is a 1step. All in one. Wax and polish, you dont need to add a separate polish or use that polish remover. You could top it with technicians choice or bead maker tho

You’re a detailer~ couldn’t say it any better

Uno Protect is a good product. I use it for paint enhancements. I pair it with a meguirs MF polishing pad and it gets some minor defects removed. If you are going to use it in stead of a wax and pressed for time, just use a lake country orange foam pad and work faster at speed 5ish. That'll not remove much, but will be enough to get the proect worked in amd done

A detailer is some one who pays attention to detail. A detail is to bring to new or like new. That's what it means to me.

Hunter "Harley Man" Right I have used that polish for a year now put on wipe off your dune buddy and it last up here for me 6 months

It's funny you posted this, because I mentioned the HD SPEED on your other video. The answer to your question is no, you will NOT see a difference in shine with a 1 step w/ wax applied after vs. an AIO (all in one). If anything, you will yield better results with an all in one, because majority of them are sealants; and we know sealants are usually always more durable than a wax. Time is money, as long as you are delivering results without shortcuts, always take the route that gets you off location quicker. You could always throw beadmaker or V07 on there at the end for extra pop.

I never said this before... Im older than you, but I'd be proud to have you as my boss. You do great work Wayne. Btw... the two step polish/wax was the more professional way to go... the one step process is faster... time and price point will dictate when to use which process.

@HuntersMobileDetailing

2 жыл бұрын

thanks that means alot brotha

Paint definitely will pop more when using the Uno.... and yes you can put a quick spray wax on it simply if you just spray water on the car after the Uno you would see the beads it's a good sealant keep up the hustle bro

If the paint isnt bad I would polish with a 2 in 1 like 3D One and then use a spray sealant like P&S Bead Maker or Sonax BSD. I prefer the spray cause it's easier to apply I dont have to deal with wax getting stuck in the edges.

Wayne. You might save some time by doing the claying with the washing. One hand with the wash mitt, one hand clay. Then you can rinse, throw the iron remover, and rinse again. Try it out man. Love the videos. Love the channel!

@stangy007

2 жыл бұрын

Then you would be introducing new scratches if you clay and wash at the same time. You need to rinse off all the soap after washing, then clay. So he's doing it right.

@SergioPerez-xd2fs

2 жыл бұрын

Shouldn't the iron remover come first then foam and clay

@JamesCecilWilson

2 жыл бұрын

@@SergioPerez-xd2fs no

@SergioPerez-xd2fs

2 жыл бұрын

@@JamesCecilWilson I would disagree you want to remove any iron contamination first because if you clay first they'll scratch the paint

@gemstonemobiledetailing4109

2 жыл бұрын

I think that as detailers people consider any type of scratching to be the absolute worst possible thing that can happen to a car. Let’s look at this from a business standpoint… I’m pretty sure if you explain the type of scratches clay bars create to these customers who own everyday cars that want a wax, 99.99% of them wouldn’t care. Probably because they aren’t very visible. This isn’t a car that’s prepping for Pebble Beach. It’s an everyday sedan that the owner wants to look glossy. Obviously as detailers, you want to clean/enhance a car, and not damage it, but how much damage are we really talking here? I dare any detailer to show a Camry-like owner before and after of what claying a car just caused. Bet not a single one will object to the damage. With that being said, claying a car causes scratches, but claying during the agitation process causes more scratches? Pretty sure you’d need a microscope to spot those differences. Another thing to consider, chances are that these customers at some point are going to want a polish. Any extra scratches caused during the wash/clay process will surely be gone at that point.

If you use the UNO Protect with medium cutting pad, you can remove minor imperfections. That would be the better option in my opinion

A detailer focuses on intricate area as you're doing! Good job man keep up the great work!

@HuntersMobileDetailing

2 жыл бұрын

Thanks !!!

Looks good man .

Uno is a stand alone product no topper needed.If you waxed over the uno sealant you just canceled the sealant in the uno.Waxes and sealants are no friendly together.

Tight work brother

What works for me is a 1gal pump sprayer from HF. (Green&white bottle) This saves time & money plus you can apply the product easily.

Do a 1step with the Uno protect. It's a great product and a big time saver!

Yo you should make a video on how you maintain and clean all of your supplies. It would be very helpful.

I was trained to always polish with a true polish to give an honest finish and then apply a sealant by hand whether it be a Spray product or liquid paste etc. the guys who fill scratches in temporarily often just leave clients disappointed down the road and I always get called back 😀 great choice buddy!

As a detailer myself, not mobile because I really clean in detail and 1 car takes about 14 hours to do, I got some advice for you: 1 Do not polish without taping of the rubbers... polishing requires time, you can't do it in a rush.. Just go for a wax instead of polishing, those 2 in 1 products don't work. 2 Get a decent clay bar and work area per area instead of foaming the entire or half the car.. A good clay bar only needs water as a lubricant, you save some money on it as well and you don't cause so many scratches because I'm 100% sure that thing you use leaves a lot of scratches which requires you to polish after it. (spray water with a sprayer not a pressure washer so you have less chance to create water spots - clay bar the area with a good clay bar - Wipe it of - Apply wax, and you're done) You turned a simple decontaminate and wax into a decontaminate, 1 step polish and wax. 3 Use IPA (isopropyl alcohol) instead of that orange stuff after you polish, is that a quick detailer btw?

@thekingleo_1664

2 жыл бұрын

That orange stuff he used looks like Beadmaker from P&S

@JMolina94.

2 жыл бұрын

14 hours to detail a car??? You should be getting at least 6-7 cars in 14 hours especially if your not mobile

@marcereyes2645

2 жыл бұрын

Well said

@dagorodriguez5265

2 жыл бұрын

I disagree, doing mobile detailing we are limited on time I think you can do a quick polish without taping off but just making sure to stay away from plastics and trim. only time I tape something off is if doing a full paint correction The way you are saying works if you have a shop and a lot of time so im not saying you are wrong.

@dirtysouthbushcraftandmma9770

2 жыл бұрын

If you use a drill for a quick polish it won't get hot enough to worry about damaging the rubbers and plastics

Bless up!

A 1 step usually already has gloss enhancers therefore you won’t need a wax afterwards plus 1 steps offer protection as well

Much better man , car came out really nice. I have not use UNO all in one yet but I ver read good reviews on it . But give car pro essence a try ( not the essence plus , just essence) , you ll love it and it comes out very very easy. Top it up with the last coat version 2 and you ll be golden. Regardless its just a matter of preference at this point, the more experience you become and more products you use , you ll decide the ones you prefer.

Hit it wuth the uno protect give it 20 minutes then throw bead maker on it

@HuntersMobileDetailing

2 жыл бұрын

thanks

I don't comment much. I absolutely appreciate the content. Do you have a video going over all the products in your list and how to use them? Keep up the good work!!

Cherry speed wax by P&S is amazing! That Rupes is the best ever. We use that in our shop!

@HuntersMobileDetailing

2 жыл бұрын

dope nice to hear

Great job man. I’m dying to start waxing man. But ima start with my own car first lol

bro great work i would do the 2 step method not the one step. but it also depends on the brand youre using. i think you would really like chemical guys products i know you take pride in your work and using their products to save time with the results you get it wont feel like cutting corners. all the best brother god bless

For the most part a wax is going to make the paint pop but offer limited protection. A sealant is going to protect longer but not pop as much. I don't know that looking at it with the naked eye we could tell the difference. If you got yourself a gloss meter you could test it out and see what you find. Polishing after clay is a must like you say as clay micro mars the finish. That Rupes UNO is a great product.

Hi Wayne. When you were applying the Extreme Shine it seemed as though the pad was stalling and not spinning? Maybe you could have applied it using a finishing/soft pad on the more powerful Rupes? Loving the content ... keep it coming 👍

Looks good bro. I own a detailing business in Australia. One step it with Rupes UNO protect.. that’s all you need after decontamination just straight on your pads and go for it. You can move quickly with fast arm movements..amazing product. You can go over the whole car in one go and only wipe off at the end. Do the glass and trim and everything. Comes out amazing guaranteed. Will pull out minor scratches but the gloss level will be insane and it’s way quicker than what you did bro. Also you won’t have any clean up after as the product is good on all the rubbers etc and won’t leave anything after.

@HuntersMobileDetailing

2 жыл бұрын

thanks for the info!!

I would only do Uno protect because it has fillers in it to fill scratches but has to sit for 20 minutes for that to work. Wax only last 90 days though. Uno pure looks better. You can use that one step with any pad and change how much correction it does.

One step will pop good and will save a lot of time. That good stuff.

3D speed is a really good polish and wax. I've used it and the cars come out nice!

@htorres860

2 жыл бұрын

3D is the best high quality product.

@bigdogbulldog9912

2 жыл бұрын

I use that as well,quick and profitable

@marlon7s

Жыл бұрын

what do you use before you wax it

AOI is the same as polish and wax, topping the AOI with wax will (supposedly) give longer durability, you made that old car pop🤩

Saludos desde Puerto Rico, Siempre veo tus videos y aprendo mucho de ellos. Me considero detailing aunque estoy comenzando y no tengo todas las herramientas de un taller sofisticado y profesional, pero ago mi trabajo con la mejor calidad posible . We are profesional on the job

Good job bro 👏

You only need the Rupes Uno it already has sealant. It works fas and avoids for you to do wax after. Good luck my man

@HuntersMobileDetailing

2 жыл бұрын

thanks

That 3d speed is good stuff I highly recommend it. have used it to do paint correction as well with the right pad. And I think the way you did this car polish and than wax gives better results than using the all in one.

@HuntersMobileDetailing

2 жыл бұрын

thanks !

@verduzcoautodetailing3183

2 жыл бұрын

How long does the protection last?

When you shampoo and conditioner at the same time 2 in does it feel as good as them being separate?

Combo products aren't as good, however you get what you pay for on the job. We only offer separate steps. Sealant isn't a wax, it's not going to pop from a sealant.. only from polishing properties. Someone else mentioned that polishing takes time and that couldn't be more accurate. What you did in the video should only be a wax in that method and time period. If you're going to use that 2 in 1 you should do a wax after cure and wipe bc that's what you're looking for on the pop. I just finished up a cut and polish today on a bmw then ceramic coating. It started yesterday, it was done today at 6:30. Cut which I know you weren't doing and polish especially on black is time and that's why it's so much money. You also should blot out in the working area, spread on low, then working speed on top of pad conditioner to work everything right and make your pad last longer.

Great video Just wondering where can I buy a custom car Detailing truck ? Thanks

I think if I was charging for a paint enhancement I’d put something on with some longevity because you just took some clear coat off so you want to prevent anymore wear and tear for the long term. What was the longevity of the aio?

@tobiasdanielsen6110

2 жыл бұрын

Rupes say up to 3 months

You need some softer towels Eagle edgeless 500 the rag company Rupes uno protect is great polish/wax

Man hunter you undercharged so much man, a One Step With a Wax Over it also for only $200.. Should've been over $400 plus you doing amazing work

@HuntersMobileDetailing

2 жыл бұрын

I know what i did was worth more. just added it to lock in a customer. def not something i will do all the time.

Hey hunter, I recently boughht the same Ryobi pressure washer you use. I'm wondering do you need to buy a special attachment to put on the pressure washer nozzle in order to connect the foam gun to it? If so what's the link to the nozzle/attachment. Not sure if you'll reply since this videos a bit old but I still appreciate the vids man ✌

If you want the result your looking for use a glaze before you put the wax. Showroom glass finish

What chemical are you using on the car after you wax that you're spraying and wiping off?

Amazing men,I think that what Aldo You can offer,is doing an Glaze stage ,because si like a polish but without hurting clear coat,and using a Graphene Spray Coating like Tutroe Wax Grpahene Spray,that is súper easy to use and also very long lasting,thank You for the content bro,blessings

you do amazing work my guy !!! How did you create your mobile app ?

My man wayne, i love your channel bro, been an inspiration to me and watching almost all of your content. Anyway, what clay mitt did you use in this vid? Keep up the good work. And love you man 👍🙏👍

@HuntersMobileDetailing

2 жыл бұрын

meguires clay mitt thanks

Dope video man! I use 3D SPEED high gloss One-step but thats a complete different service at that point lol $350 minimum... if you wanna do a wax and want it to pop use JESCAR POLYMER SEALANT.

@mikeshanks1266

2 жыл бұрын

This man knows what's up, I second everything you said. 👍

@dagorodriguez5265

2 жыл бұрын

Yo Felix good to see you checking out Waynes vids man and I 100 % agree with what you said, I use those products as well and im actually thinking of getting some of that collinite wax you use too

@jc7879

2 жыл бұрын

They will both pop, but one might last longer than the other. I’d expect the all in one to have a shorter longevity. From a time perspective the all in one saves you lots of time. If I were you I’d give the customer two options if cost is an issue. If they want a dedicated wax you can charge extra depending on the longevity of the wax you use. That’s what I do.

@thecardadstl

2 жыл бұрын

You are 100% accurate with everything you said. However, with an express detail, remember Powerlock Plus has a 30 min cure time. Not efficient for this type of detail.

@verduzcoautodetailing3183

2 жыл бұрын

How long would it last ? For protection

Ok so I’m just getting in the business what chemicals are you spraying to buff out the wax?

I have a RV detailing business. If you use the two in one product you will go over the car only one time. If you use the two-step process with two different material for the paint, that would be better. because you are working on the car longer and polishing it twice instead of once! This should give it the edge…because it’s more labor using the same method. I hope you understand. Lol

@HuntersMobileDetailing

2 жыл бұрын

i sure do thanks for taking the time

Try p&s play maker all in one with a finishing pad works wonders

So this is how you should break it down and it all comes down to pricing. The Uno protect product is used as an all in one paint enhancement because it comes with protectant already infused into the formula that lasts several months. Let’s say that’s $350. So you’d be charging $350 for and all In one paint enhancement that is infused with protection, no need for you to wax afterwards, and should take you really about 30 minutes to apply on the vehicle. If you were to do them separately that you should be charging more ($400-$450) because you’ll be taking more time as you would have to polish first then apply the wax or sealant afterwards. Another selling point for the extra charge charge would be the longevity of the protect that is applied separately vs what is already infused in the all in one product. Uno protect will give you 2-3 months while another wax/sealant can give you 4-12 months. So it all comes down pricing and time.

Hey I have a quick question does Malco showroom shine good? like the spray wax

Being your mobile I would go with rupes one. Once your done hit it with either beadmaker or GYEON wet coat for an extra layer of protection. It will be faster and easier. Play with scratch removal but doing 2 step paint correction on the side of the road is rough.

We also use uno protect. We spray a spray sealant as a topper.

Another killer video

Kochchemie p601 or p301. Great cut and finish with a yellow rupes pad speed 4 1/2

What were the products used here? What was the orange liquid in the spray bottle?

To save you time. You should auto scrub then rinse then use adams gaurd and gloss. Seals while you dry the car. Can charge for a sealent and save you time. As it’s applied when the car is wet. The shine is comparable with a ceramic coating

You should get a roof rack . Maybe carry the tent strapped on top

Hey bro I have a question have you done school busses or RV's I ask you cause I got a client je wants me to wash 2 busses but I don't know how much to charge him