Which Carb Will Fit Your LRP Nitro Engine?

I get this question asked VERY often! That's good, this means that LRP engines are quite popular. Here are some carbs that will fit the LRP spec 4 engines 👍
#LRP #Nitro #RC

Пікірлер: 124

  • @a2rc
    @a2rc8 ай бұрын

    Just checking out some of your older vids Tasty. - This is a good one. Thanks for putting it together 🩷

  • @TastyBRC

    @TastyBRC

    8 ай бұрын

    Thanks for watching! Planning to buy a LRP?

  • @a2rc

    @a2rc

    8 ай бұрын

    @@TastyBRC Not at the moment but, I’m always try to learn/absorb new information.

  • @pistonpoweredrc2092
    @pistonpoweredrc2092 Жыл бұрын

    Great video thanks for sharing. Very informative.💯👍

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thanks for stopping by 🙏

  • @DanJr007_Collectibles
    @DanJr007_Collectibles Жыл бұрын

    Awesome video champ 😊😊😊 Thanks for sharing 🎉

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thanks for watching!

  • @andybarnett2214
    @andybarnett22143 ай бұрын

    Great info thanks for sharing.

  • @TastyBRC

    @TastyBRC

    3 ай бұрын

    Thanks for watching 👍

  • @sakisSAVAGER
    @sakisSAVAGER Жыл бұрын

    Another great video 💪🙏💯

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you!

  • @michaelbowes6873
    @michaelbowes6873 Жыл бұрын

    Thank you for the info. Very helpful. I was ready to sell my .28 and .32 because they will not hold a tune. However working on the Lrp carbs has made me a better tuner. So something good came out of it. Ty

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    You are welcome! Thanks for stopping by 👍 After dealing with an LRP carb, any other carb will seem easy to you! it's learning the hard way 😅

  • @NicholsonNitroWorks

    @NicholsonNitroWorks

    Жыл бұрын

    An OS B21 Adam Drake carb will work in the LRP.32 spec 4.1 without modification the seal is at the bottom of the throat and Adam’s published carb settings are very close for the spec 4.1. Use the .28 pull start back plate and roto start if needed

  • @ramos.nitrorc

    @ramos.nitrorc

    Жыл бұрын

    @@NicholsonNitroWorks fits lrp 28 spec 4??

  • @SLC_nitro
    @SLC_nitro Жыл бұрын

    Very nice collection of carbs.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you 👍 most of them are good but OS are the best so far

  • @SLC_nitro

    @SLC_nitro

    Жыл бұрын

    @Tasty B Also Big thanks from me and Nitro Rc life for the exhaust manifold adapter! Thank you man your a Stud.

  • @mohammaddubai2984
    @mohammaddubai2984 Жыл бұрын

    💥💥💥💥💥👍

  • @g.bjumpsbashing3062
    @g.bjumpsbashing3062 Жыл бұрын

    great clean job champ😍👌

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you!!

  • @hpiedsavageed7608
    @hpiedsavageed7608 Жыл бұрын

    Thx! Now I'll be saving up for an os carburetor for my lrp .32 engines!

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Not the cheapest one! bbut you can't go wrong with a OS carb

  • @adamkukulj5537
    @adamkukulj5537 Жыл бұрын

    Alright about time someone answered the questions 'Cheers' to be fair your a Champ, a few more comparisons like this vid would be a Mega service to the rest of us who are left in the Nitro World!!! i.e. use your4.6/5.9 engine (as we know these carbs are mud simply criminal) or use any engine you know have a below standard of quality and which are impossible to hold a tune. Love your work! Spot on!!!

  • @TastyBRC

    @TastyBRC

    11 ай бұрын

    Thanks bro! Im planning a video with different carbs, I tried the hobao and it runs great aswell as the nova, next one is the argus! And I think it may be one of the best, a good carb can make a low quality engine run great

  • @adamkukulj5537

    @adamkukulj5537

    11 ай бұрын

    @@TastyBRC looking forward to it. I just can’t get my HPi 5.9 running well at all…lol. Your subject contents are very good some of these other guys you have to put yourself through 30min of dribble just to get 1min worth of value 😂 cheers legend 👊

  • @tonysands2837
    @tonysands2837 Жыл бұрын

    Great job no the carby selection bro 🤜 good to see what’s available I try an buy any old novarossi just for the carby get a bit more harder to find in Australia 🇦🇺 great 👍 video

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you Tony 👍 Novarossi carbs are great but very difficult to find anywhere! OS are the best IMO but more expensive than an lrp engine 😅

  • @tonysands2837

    @tonysands2837

    Жыл бұрын

    @@TastyBRC lol that’s very true mate getting harder to find 👍 keep up the great videos mate there really good to watch I appreciate you cheers

  • @ValRC1
    @ValRC1 Жыл бұрын

    damn, you have a lot of engines! currently getting into nitro but it's kinda hard especially with my limited budget and having to try around with used cars. I have 3, one of them I got somewhat running properly by now, one of them has been running great since i got it. just gotta get some air filter oil to actually drive it without killing the engine now (i used 2 stroke oil after someone's recommendation of it with my first one and dust got into the engine...)

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    It's an expensive hobby 🫤 i've been running nitros for 18 years so i have a large engine collection now! 2 stroke oil for the air filter is not a good idea. Chainsaw oil is cheap and will do the job! Still, air filter oil is thicker and the best for your engine.

  • @ValRC1

    @ValRC1

    Жыл бұрын

    @@TastyBRC with how expensive everything else is, might as well spend the extra $5 on some air filter oil, I've learned..thanks man!

  • @rcbuggyhl4674
    @rcbuggyhl4674 Жыл бұрын

    Salut Tasty 😉 Très intéressent ces compatibilité de carburateur... Tu gères my friend 👌👍

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Merci 👍

  • @RCWright
    @RCWright Жыл бұрын

    Awesome video, thanks for sharing. You mention about the short and long needle cards, why are the long needle cards easier to tune? Just because most of the tuning is on one needle, low speed?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you Robert 👍 Why are long LSN carbs easier to tune... 😕 I dont know! Those carbs are just more predictable, they will react to needle adjustments exactly as you would expect, which is not always the case with short LSNs, harder to read

  • @billtruett8593
    @billtruett8593 Жыл бұрын

    I installed a 20C (VZB) carb on my SH PT.21AO-XGB and it runs awesome reminds me of a old nova Toro nero.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    A good carb on a good engine 👍 I heard that those race. 21 SH run very good and Im considering buying a lrp zz21s wich should be pretty similar to your SH. The toro Nero at his time was my dream engine! I wish i had one

  • @Surprisinglymoist
    @Surprisinglymoist Жыл бұрын

    Thank you

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    You're welcome!

  • @Surprisinglymoist

    @Surprisinglymoist

    Жыл бұрын

    Could I ask what ones fit the lrp .30 spc2 pull start, sir. I'm in need of one. I have a 3 needle, hpi 4.6 carb, and it fits great but needs total rebuild due to age. Will the hobao fit in the .30 spec 2 pull start? Thanks

  • @stankovic7150
    @stankovic7150 Жыл бұрын

    👌

  • @lawrencewinter
    @lawrencewinter5 ай бұрын

    Hey thanks for the content - very helpful. For the break-in process, should you stick to the stock carb, or put a different one? If going with a different one, how do you know the correct needle presets? Thanks again for sharing.

  • @TastyBRC

    @TastyBRC

    5 ай бұрын

    For the break-in, I use the stock carb with the factory settings, wich are Usually rich and not far from what you need to Break the engine in. If you swap the carb you may start with extreme lean or rich settings and better have good tuning skills so you wont damage your brand new engine

  • @lawrencewinter

    @lawrencewinter

    5 ай бұрын

    Thanks very much. I can tune fairly well so I'm not worried about changing out the carb. Nice one@@TastyBRC

  • @twinturbotony93
    @twinturbotony938 ай бұрын

    I have a reds carb im pretty positive will fit the lrp also. I put the stock lrp carb on an engine that wouldn't run & it ran good. So i put the reds carb on it & it runs great now.

  • @TastyBRC

    @TastyBRC

    8 ай бұрын

    Your reds carb will fit and do the job! I dont have much Reds experience, I only have a old R5R team wich runs and tune great, dont know how the newer reds tune but I got one coming soon :)

  • @twinturbotony93

    @twinturbotony93

    8 ай бұрын

    @@TastyBRC I have the r5r also. I had it modified by rb mods. Runs great and holds a tune all day. I've barely had to touch the needles on it.

  • @TheGhostman132
    @TheGhostman132 Жыл бұрын

    Nice video! The good carb is the most important part of the engine! Do you know if trx 3.3 takes any other than O.S 11k carb? I have used that one, but they are not so easily available.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Thank you! Absolutely agree ! A cheap engine with a good carb will run good! I heard that losi 3.4 carb will fit the trx and tune really good! Maybe easier to find than the OS carb! Check thebug 404 's channel 👍

  • @2259alfie
    @2259alfie8 ай бұрын

    Will the O.S. 30VG Carburetor #21E Slide (part #OS23981010) fit the LRP ZR .32X Spec. 4 ? Is this the carburetor you mentioned on your video ?

  • @TastyBRC

    @TastyBRC

    8 ай бұрын

    Yes it will fit no problem

  • @Bang_n_slang
    @Bang_n_slang7 ай бұрын

    Which carb has the biggest Venturi? I have the LrP 32 4.1. Looks like Lrp has since upgraded their carbs and has the same size Venturi as my novarossi carb. But looking for something that’ll let more air in.if I’m not mistaken they come in 9mm Venturi stock.

  • @TastyBRC

    @TastyBRC

    7 ай бұрын

    The LRP carb has the bigger venturi but honestly I dont feel any power loos when running a different carb. Yes the 4.1 comes with a 'improved carb' a 3 needles carb, mine ran ... almost good for a few liters until it started acting weird and I had to swapp for an os carb

  • @keithrx3c
    @keithrx3c10 ай бұрын

    I bought an LRP .28 engine a few years ago but never ran it, it's still in it's original box. I remember hearing that the carbs needed upgrading but I didn't know why. What's the part number for the hobao carb seeing as it seems to be the best choice?

  • @TastyBRC

    @TastyBRC

    10 ай бұрын

    E30020 👍

  • @nathanbulmer799
    @nathanbulmer7997 ай бұрын

    I just bought an LRP ZR.32 4.0 for my hpi savage 5.9. Would the carb from the hpi .36 engine be better on the ZR.32 if it permits

  • @TastyBRC

    @TastyBRC

    7 ай бұрын

    Your hpi carb will not fit the lrp! Not the same diameter

  • @Skyler801RC.
    @Skyler801RC.Ай бұрын

    Is the lrp 4.1 carb actually worth the money to put on the .28. The hobao looks like a 3 needle which ive never ran.

  • @TastyBRC

    @TastyBRC

    Ай бұрын

    The lrp 4.1 carb crap.. still better than the .28 lrp carb wich is not insulated but dont waste your money on lrp carbs. The hobao is a good one. Most people never touch the thrid needle, just keep the stock setting for that one.

  • @MrHighOctane8
    @MrHighOctane8 Жыл бұрын

    If using the Hobao carb, did you leave the lower o-ring on the carb as it has a groove in the bottom of the carb, or remove it? Thanks!

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Yes i leave the hobao lower oring, im currently rebuilding an lrp 28 with a hobao carb, i should start to break that engine in tomorrow!

  • @MrHighOctane8

    @MrHighOctane8

    Жыл бұрын

    @@TastyBRC thanks. Do you also leave the lower o ring in the engine case as well?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    @@MrHighOctane8 yes, leave all the o-rings 👍

  • @MrHighOctane8

    @MrHighOctane8

    Жыл бұрын

    @@TastyBRC can you put that Alpha Carb (I assume that's from a trackstar engine), into an OS engine spec iii engine?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Yes you can, its not an upgrade for sure but it will fit. Argus and trackstar are made by alpha.

  • @gamertime1648
    @gamertime16483 ай бұрын

    Hello again I have just received my Hobao carb for my Lrp.32 and the hsn is super tight and hard to turn, is there a fix to this

  • @TastyBRC

    @TastyBRC

    3 ай бұрын

    That should not be an issue but if you want it smoother, unscrew the needle and add a bit of Oring grease

  • @2259alfie
    @2259alfie8 ай бұрын

    Great education nitro video 👍🍻 I own the LRP ZR .32X Spec. 4 , what novarossi Carb will fit ? You mentioned NovaRossi and other carbs But you do not mention the model number. I found a Hobby Shop in Japan who carry lots of Novarossi new parts to rebuild Novarossi nitro engines

  • @TastyBRC

    @TastyBRC

    8 ай бұрын

    Thank you, I dont mention model numbers because any of these brands 3.5cc engine's carb will fit!

  • @WilliamWhite-bo6nu
    @WilliamWhite-bo6nu Жыл бұрын

    What is the Picco carburetor for the SH engine?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Old style piccos with the angled exhaust, picco boost for example

  • @ValRC1
    @ValRC1 Жыл бұрын

    Is the Carb of the Z28R SPORT just as bad / the same? Got it in a used car and seems like the engine is in pretty great condition

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Sorry i have no experience with that carb... but from what i see it's a full aluminum carb, not insulated, not great.. but give it try, worst that can happen with that kind of carb is vapor lock and it may kill a glow plug, if that happens, change it! (the carb)

  • @ValRC1

    @ValRC1

    Жыл бұрын

    @@TastyBRC alright, thanks man :)

  • @NicholsonNitroWorks
    @NicholsonNitroWorks Жыл бұрын

    An OS B21 Adam Drake carb will work in the LRP.32 spec 4.1 without modification the seal is at the bottom of the throat and Adam’s published carb settings are very close for the spec 4.1. Use the .28 pull start back plate and roto start if needed. It’s an overpowered beast in a savage xl with a reds 9mm Venturi and 30% nitro.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    I wish I had one of those Adam Drake engines!

  • @NicholsonNitroWorks

    @NicholsonNitroWorks

    Жыл бұрын

    @@TastyBRC they do look amazing.

  • @ramos.nitrorc

    @ramos.nitrorc

    Жыл бұрын

    i bought the os carb for my lrp 28...will let you know how it goes

  • @jdportwerks6795
    @jdportwerks6795 Жыл бұрын

    Can I break this LRP.32 with stock carb or do you suggest I use NovaRossi Carb?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    As far as you run the lrp very rich, it will be ok, so i would say ok for the break-in. Once you try to tune your lrp to get the best performance and the engine starts heating up, the lrp carb will become very inconsistent and make your egine run very lean. A Nova carb is a major upgrade for the LRP

  • @jdportwerks6795

    @jdportwerks6795

    Жыл бұрын

    @@TastyBRC thank you Sir🙏🏻

  • @musa12456
    @musa12456 Жыл бұрын

    Would you recommend leaving the 7mm venturi in the hobao carb or opening it up to 9mm like the 32x carb?

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    I tried the hobao carb with the stock 7mm venturi and felt a huge performance loss compared to any other carb, so yes I recommend the largest venturi possible, mine ran well with the 32 4.1 9mm venturi

  • @josha4751

    @josha4751

    Жыл бұрын

    Wood the hobao 30 carb fir the lrp 32

  • @musa12456

    @musa12456

    Жыл бұрын

    @@josha4751 yeah the hobao carb in this vid is the hyper 30 carb. Same one they use on the hyper 21 macstar 28 and hyper 30

  • @josha4751

    @josha4751

    Жыл бұрын

    HE30020 wood that's work at all

  • @pfunk72
    @pfunk72 Жыл бұрын

    I have a zr.30x lrp. Will any one of these carbs work if so which do u recommend for my engine.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Correct me if im wrong, the lrp 30 comes with the new style Block, like the New 28 and 32, NOT the old SH (lrp spec 3) block shown in the video, the one with red cooling head. So any of these carbs will fit, except the sh and old picco. I recommend the hobao carb as budget carb 👍Best is OS and nova... but these are hard to find and very pricy

  • @luist6635

    @luist6635

    Жыл бұрын

    U have any model # for O.S or Nova carb that best works

  • @ramos.nitrorc
    @ramos.nitrorc Жыл бұрын

    the OS 30VG tunes well??

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Very well

  • @joshherrman3201
    @joshherrman320110 ай бұрын

    So are all the carbs that come with the .28 not good? Or was it just your engine that you got?

  • @TastyBRC

    @TastyBRC

    9 ай бұрын

    All the lrp .28 and .32 5 ports carbs are not good, the 7 ports lrp carb will do the job.. but all the carbs that you have seen on this video tune better than the lrp carbs

  • @joshherrman3201

    @joshherrman3201

    9 ай бұрын

    @TastyBRC thanks for the feedback. I've got a t9n of rc knowledge, but unfortunately, all of mine is electric. I've just recently picked up 2 losi lst nitro cars.

  • @josha4751
    @josha4751 Жыл бұрын

    Hi what hobao carb will fit the lrp 32

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    Think you got the answer 👍

  • @gamertime1648
    @gamertime16483 ай бұрын

    Will the os speed carb fit on the Lrp.32, part#OSM2AP81000

  • @TastyBRC

    @TastyBRC

    3 ай бұрын

    If its a 3.5cc engine Carb it will fit. Any 3.5cc OS carb will fit. If its a 2.1 engine carb it will not. You need to do some resarch and check if its a .12 (2.1cc) engine carb or a .21 (3.5cc)

  • @aimlockersesp7680
    @aimlockersesp76803 ай бұрын

    😅😅 TastyBRC ive bought a hobao carb for my LRP but can you send me a link for a O.S carb that i dont need to shorten the carb price max 70 € maybe 80. Sorry that im asking you lot but you are helping really great

  • @TastyBRC

    @TastyBRC

    3 ай бұрын

    That is going to be very difficult ! New os carbs are very expensive, over 100e, thats the main reason why most pople used to install novarossi carbs, they where sold half the os carbs price. Try to find a used os carb, I will also check and let you know if I find one 👍

  • @Poonslaya
    @Poonslaya5 ай бұрын

    The Hobao hyper vs2 .30 turbo nitro engine carb fits the lrp one perfectly and is a weapon on it

  • @TastyBRC

    @TastyBRC

    5 ай бұрын

    Correct that carb will fit and its an upgrade to the stock carb

  • @NickXabias

    @NickXabias

    4 ай бұрын

    is it better than the stock lrp .32 carb ? 🤔🤔🤔

  • @TastyBRC

    @TastyBRC

    4 ай бұрын

    @@NickXabias any of these carbs is better than the lrp carbs!

  • @Poonslaya

    @Poonslaya

    4 ай бұрын

    @@NickXabias 100% yes

  • @Poonslaya

    @Poonslaya

    3 ай бұрын

    @@NickXabias Harder wearing and just built better easier to tune. Some people change the air filter however I prefer the hobao one

  • @speedgears1236
    @speedgears12366 ай бұрын

    Will the O.s. carb fit on the pullstart lrp engines

  • @TastyBRC

    @TastyBRC

    6 ай бұрын

    Any .21 OS carb will fit the lrp engines

  • @speedgears1236

    @speedgears1236

    6 ай бұрын

    @@TastyBRC thanks

  • @SLa-lr4eg
    @SLa-lr4eg4 ай бұрын

    what's diameter is it? I have some novarossi carb and it is 15 but my lrp 28 has 14mm.

  • @TastyBRC

    @TastyBRC

    4 ай бұрын

    Your Lrp must be a spec 3, same bloc as the sh28. Nova carbs wont fit that bloc. The spec 4 has a different bloc and carb

  • @SLa-lr4eg

    @SLa-lr4eg

    4 ай бұрын

    @@TastyBRC thanks for your reply. Yes, this is LRP z28R spec 3. Did you know which better carb can fit?

  • @TastyBRC

    @TastyBRC

    4 ай бұрын

    @@SLa-lr4eg very few options for your lrp. Old picco carbs as shown in the video will fit and sh 28 carbs. The sh 28 carb is a very basic aluminum carb, not insulated but tunes a bit better than the lrp carbs.

  • @SLa-lr4eg

    @SLa-lr4eg

    4 ай бұрын

    @@TastyBRC picco 6428 or 6448 should fit?

  • @SLa-lr4eg

    @SLa-lr4eg

    3 ай бұрын

    @@TastyBRC Hi, I change to picco 6428 it fit perfect, but picco has a 7mm venturi and the stock lrp has 7,5 to 9mm. Will it make a big difference? I only ride on small tracks.

  • @ramos.nitrorc
    @ramos.nitrorc Жыл бұрын

    I bought a brand new lrp 28 spec 4 (my sercond one) and I will change the carb before even breaking it in..I bought the hobao and an os engine adam drake 21 edition..will see which is better.

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    The hobao is a good option because of the price. Nothing can beat an OS carb!

  • @ramos.nitrorc

    @ramos.nitrorc

    Жыл бұрын

    @@TastyBRC i bought both haha... Adam drake os 21 carb let's see if it fits.. I have two lrp 28

  • @TastyBRC

    @TastyBRC

    Жыл бұрын

    @@ramos.nitrorc let me know your toughts about those carbs on the lrp 👍

  • @ramos.nitrorc

    @ramos.nitrorc

    Жыл бұрын

    @@TastyBRC yeah ill give you feedback once I install them ...sometime next week

  • @tgillilz71

    @tgillilz71

    7 ай бұрын

    ⁠​⁠@@ramos.nitrorc did you ever test these two carbs? I’ve got the hobao on order but might order the Adam Drake as well.