Nitro Engine Tuning...101
This is no means gospel, just really wanted to explain what your listening for and get you thinking about tuning. Here I will be doing a box tune on the Novarossi Keep-Off 4, its a 4 port .21 nitro engine. Sorry for the audio quality, be safe friends and family...
#tuning101, #idle, #novarossi
Пікірлер: 222
You said is not a great tuning video, but this has been the best tuning video I've seen period.
@rajaa111
4 жыл бұрын
Dr. Who thank you brotha,
@keithbates8482
3 жыл бұрын
@@rajaa111 You bro I have been struggling hard with tuning, but the way you explain this, I have confidence that I can do it now, thanks bro. So I always start with with the HSN, then low and when the idle raises, then I adjust my idle screw, I always forget to do the pinch test but thank bro for the information
@johnhopkins6511
3 жыл бұрын
Yeah out of all the tuning videos you are the first one I’ve seen break it down so simple. Appreciate the help
Just getting back into the hobby and loving your videos. Going from a frustrated walk away to an educated enthusiast. Please keep it up.
Amazing Video. Thank you. This is very helpful. Need to watch over a couple of times to register it in my memory. Really like the quick tips your giving
@rajaa111
4 жыл бұрын
No problem brotha, you will get it, just take your time it will come
Am going to tune my novarossi today, nice one for your info dude 👍 as am running the p7 they sound frigin awesome nova!! You say it how it man peace ✌️
Good video brotha, this will definitely help ppl out who are having tuning issues. This is what its all about. Helping ppl. this is what I love to see man. Keep up the fantastic work bro. Thanks,
@rajaa111
4 жыл бұрын
Thanks brotha, I hope this video does and we can get back to racing
I thought I knew a lot about tuning....great vid ...very easy to understand and also shows how to trouble shoot.🔥👍
@rajaa111
3 жыл бұрын
Thank you sir, I appreciate the kind words
Love the vids dude, been watching you a lot lately. You've got me getting back into nitros! I started running e-words but now i'm rebuilding both of my nitros and thinking about getting a nice racing buggy.
@rajaa111
4 жыл бұрын
My man, thanks for the love brotha, come on back to nitro and start racing, you will be hooked
I definitely have to save this video for when I do get a nitro engine. Thank you again for the great video and information.
AMAZING VIDEO BROTHER!! Must give this a try.
Wonderful video man. Been watching your videos for a year or so, true gentleman and ambassador to the nitro hobby and super informative. Thanks for the content, looking to finish breaking my Ielasi tuned novarossi .28 3 port this weekend and getting my slightly modified losi 8ight t rtr tuned up this weekend. Have a good one brother
@rajaa111
4 жыл бұрын
I appreciate that!
Thank you for making this video man! Great stiff and very much appreciated for your time!
@rajaa111
4 жыл бұрын
No problem brotha, thanks for watching 👍🏾👍🏾👍🏾
Asome video really helped a lot just order my first nitro race buggy impart because of your videos thanks for all the Asome content
Bravo, excellent video.
Great video man. Helps a lot with my 8ight RTR
Guys, Pre heating also saves wear & tear on the engine-sleeve , due to the pinch at start-up . If you want it to last (a very long time ) pre-heat your engines .
@rajaa111
4 жыл бұрын
Preach brotha!!!!
@AlexanderJuholaJones
4 жыл бұрын
I have been pre-heating for the last couple of years and before I did the engines were so hard to start and wore down real quick. Heat will save you time and money.
Can’t believe anyone would give a thumbs down, so much good information!!!
Nice vid good explanation nice low idle & dropping down immediately to an idle good stuff 😎👍🏾👊🏾
@rajaa111
4 жыл бұрын
Thanks brotha
Thank you for the information great video keep in touch
Says "this is not a good tune video". Me: best video I've came across, finally understand how it should sound. Been trying to get it right for the longest
@rajaa111
Жыл бұрын
Thanks brotha
Rajaa bringing the knowledge again. Thanks bro. Best rc channel in KZread
@rajaa111
4 жыл бұрын
Phillychew 215 my man, thanks brotha...
Making the best of lockdown by breaking in a nitro. Thanks for the content.
Great video bro! I saved this one to my rc play list 👍🏼👌🏼
@rajaa111
4 жыл бұрын
Glad you enjoyed it
I like your vids they help a lot I watch them all the time
@rajaa111
4 жыл бұрын
Sweet, glad they could help 🤝
Thanks brother! That was a great video I need more like that.... I can’t tune to save my life.
@rajaa111
4 жыл бұрын
Lol... yes you can, those on-road cars are serious
I would have given a thousand likes if I could. Got my old Mega Nova SX21 engine running quite well. I was getting quite desperate, to be honest, but following your method did the trick!
great video bro I’m still learning the game I’m in the process of tuning my new engine nova 28.8 and yes I’m hooked wife on my ass about parts lol appreciate you ✊🏾
@rajaa111
4 жыл бұрын
My man, you will get it, it just takes time to develop the ear for it
Great explanation brotha u killed it🤘
@rajaa111
3 жыл бұрын
Thanks brotha
That was a nice one Rajaa I like that brother keep up the good work👍😤
@rajaa111
4 жыл бұрын
Thanks brotha
Love it brother I needed you lol😁👍👍
bro this is sooooo good thanks sir!!! @19:00 really helped me out with my low speed settings.
My go to nitro guy !!!!!!! Watch all your videos
A great tuning video, Thanks for sharing...time to dust off all my nitros and scare some birds. Miss the smell, and the sound.
Keep it going my brother 💪💯
@rajaa111
4 жыл бұрын
Absolutely, thanks brotha
I was needing a tuning video, thanks brother for the great info. Hopefully you will do a full race tuning video 🔥🔥😎
@rajaa111
4 жыл бұрын
No problem brotha, I will once we can get back to racing
@nonamenitro8615
4 жыл бұрын
@@rajaa111 thank you brother, trying to get ready for some racing as well, hopefully we can go soon.
best nitro tuning video i saw 👍
@rajaa111
Жыл бұрын
Thanks 🙏
great vid man probly one of the best ways to get a good idea of how tuning should work listening is the main thing as u say once again great vid to get a box tune
@rajaa111
4 жыл бұрын
My man, thanks brotha
@NitroFreak
4 жыл бұрын
@@rajaa111 anytime ive been fallowing you for awile not sure if your a subscriber to my channel i do alot of vids to help newer guys but no were to your experiance level ive learned alot from you over time love all your vids keep up the great work
I bought a 12 pack of those hobao t3 plugs, I really like them.
Thank you very helpful for me!
Another great one🤩😎
@rajaa111
4 жыл бұрын
Thanks brotha 🤝
Amazing job👏👊
@rajaa111
4 жыл бұрын
My man, thanks brotha, I truly appreciate it
Waowww bro, for me the best tuning video in KZread!! 👍💪💪
@rajaa111
4 жыл бұрын
My man, glad it could help 🤝
@luisrosario1112
4 жыл бұрын
@@rajaa111 thankss, big fan!! 👍
Bro when made that clutch video I was able to rebuilt my novarossi clutch, that’s so true bruha listening 👂 engine hearing the engine it’s better than the sight make that sweet sound baby👍👍
@rajaa111
4 жыл бұрын
My man, you are doing great work brotha, keep it up
Great video brotha, just finished breaking in my Nova Mantra in buggy and K501 in truggy earlier today. Left’Em on the rich side since cool out and on concrete. I see why you love the FX engines, easy to tune and that K501 was rippin. Can’t wait to try my K302 in buggy. Praying for this chaos to end to hit these tracks!
@rajaa111
4 жыл бұрын
CJ220 thanks brotha, that’s right keep those babies ready for track time once this virus stuff dies down, congrats on those fx engines, you will love them
@SonicH6265
4 жыл бұрын
I couldn’t find the K302 at Amain..... They are just selling the K501 I believe right now... know anything about this?
@CJ220_GBR
4 жыл бұрын
Kevin Caldwell not sure why they don’t have the K302 but you can get it on rcamerica. Here’s the link www.rcamerica.com/fx-engines-1/engines-1/fx-k302-1-3-ports-dlc-ceramic-bearing-balanced-650104
Thank you for this video
I like watching your vids because I am a newby to nitro cars at the moment I like watching the nitro cars go around the track mine nitro car is getting fix at the moment down in adelaide
@rajaa111
4 жыл бұрын
Thanks for watch. I'm glad you like them, soon you will be on the track getting those laps
Nice my man😊
Great info bro!!🏎💨💯👊💪💪👍👍
@rajaa111
4 жыл бұрын
Thanks brotha, hopefully scope will open up and this virus stuff will go away and we can meet up at the track
Great video, thank you 👍
@rajaa111
4 жыл бұрын
Thanks brotha
thank you so much for this
Good video bro ! Keep safe ! We are also in lockdown on the uk ... miss driving my RCs
@rajaa111
4 жыл бұрын
Thanks brotha same to you and your family 🤝
@AlexRcHandyman
4 жыл бұрын
@@rajaa111 respect brother 🤜
Great video mate, you explain the tuning especially on the low speed needle and idle very well. Also I’m a big fan of fx engines too, I’ve got a k301 in my mp9 buggy and it’s the best running and easiest to tune engine I’ve ever owned. Keen to get a fx 5 port for my truggy in the future too 👌
@rajaa111
4 жыл бұрын
Thanks brotha, yeah the k501 is a beast it goes great in a truggy
@edwardmclane7202
4 жыл бұрын
rajaa111 keep up the great work mate, looking forward too more of your awesome videos
awesome👍🏻👍🏻👍🏻
Yes sir!! I can tune my engine based off sound/ smoke. You can also smell when the motor is too hot
@rajaa111
4 жыл бұрын
Exactly, it just takes time to develop
Good tune Job you say it's not the best this is good will send it to the new RCBoys.
Nice video thanks
Smh.....u know how to tune them thangs bro....🔥🔥🔥🔥
@rajaa111
4 жыл бұрын
thanks brotha
Taking me to school my dude great content.
Liked, subscribed
Can confrim! I have old Mugen MBX-5 with Novarossi and old Honda Civic. Both reliable as hell
What’s going on brother, hope you and family are safe! Big, big fan! Have a TLR 8 x elite with a Roma .25..
@rajaa111
4 жыл бұрын
Thanks brotha, same to you and your family
Good info
one tip, do it with wheels on, the tune is quite differnt without wheels.
My man👍🏼👍🏼👊🏻🔥
@rajaa111
4 жыл бұрын
My man, appreciate you brotha
Fantastic video. I think I have my tune pretty good on my OS B2103, but it likes to drink a little too much fuel overall. I'm hesitant to lean it up, but in a more controlled table-top environment like this, I may try to optimize it. I live in the Phoenix area, and it is HOT! Running 30% nitro, I have found that a P5 (colder) plug seems to help idle and overall motor consistency vs. the stock P3. However, this probably attributed to the richer running as well. I really like the "hose technique" you're doing. Where did you run it? Does it just run along the floor to a door then to the outside? How long is the hose, and does it affect back-pressure or the tune when taken off?
This is perfect! I struggle with trim. What should that be at on the controller?
16:47 here you have a good tune, the idle drops down after rev and stays, you screw on it afterwards and screw it up. i would test with wheels on the road with the settings at 16:47. when you load the engine it behaves different and wants more fuel than unloaded.
Great stuff.what do u say about the secondary drop in nitro engines..good or bad..?
It is the best video
@rajaa111
3 жыл бұрын
Thanks ✊🏾
Thankx for the idea sound cause im no motor guru sweet an ty
@rajaa111
4 жыл бұрын
No problem brotha, hopefully we will be back to racing soon
@roberttannenbaum6779
4 жыл бұрын
@@rajaa111 yes sir cause i spent over 2k an didnt even start my stuff up but all is good hope its soon but i really dont think so but we will get up at a track soon hopefully
Hope i get to see you at one of the tracks around here ma man!
@rajaa111
4 жыл бұрын
Same here brotha, everyone is dying for a race right now
I got a picco P3TT in a losi eight,any idea why its so tight(nearly binding)to turn over and locks at dead center? Had someone else put the engine together and am worried its been done wrong as opposed to it just being new and tight? Any advice would be much appreciated 🙏
Awesome video man just getting back into 1/8 racing my old engine was way out of tune. Needed this video! When you say you’re adjusting the idle that’s the mid range needle right?
@rajaa111
4 жыл бұрын
No the idle is the small screw usually in the back of the carb
Just got my new blok gotta finish break in as it was oil bath from factory.
Great video. Please tell me if I'm correct. A general base setting for any engine is 3 turns out on hsn and lsn flush?
@rajaa111
3 жыл бұрын
Well that’s a general rule but not always, the manufacturer my have set the base tune differently
Hey man, I have a question, I have been reading on tuning and noticed that the long low speed needle tuning is different than the short low speed needle. I have the long low speed needle, can you give me some steps on how I tune it? Thanks
chilling g looking to learn
great video dude, quick question i've got a HPI savage x 4.6, recently built it as it was in storage, the engine seems like its got load of compression. Engine fires up greatly, however i do notice a little bit of tiny tiny bubbles building up and kind of going (disapearing) in the fuel line, is this something to be concerned or do i just drive the thing, its not big blob of bubbles if that makes sense..
@rajaa111
4 жыл бұрын
Laz it’s nothing to worry about, most nitros do that
What if it bogs from a take off and sometimes turn off
Ciao come fai ad ottenere una scorrevolezza della trasmissipne generale cosi efficiente ? Usi tipi di cuscinetti particolari?
Great job SUPER NICE! QUESTION, is rich running worse than lean?
@rajaa111
3 жыл бұрын
Well rich will not damage the engine but you will not be getting optimal performance
One more question: when you tune from day to day, do you also adjust carb gap? Thanks 😊👍
@rajaa111
4 жыл бұрын
Not really, sometimes you may need to adjust you idle screw which in turns will adjust you carb gap, most of the time once I get the engine dialed in I may only adjust the main needle
what tools do you use to wrench your car? THE DRIVERS
Hey brother I got a question. Have you ever run the Nova Roma 25? And if so what plug? I have been running the cto6 and they are out of stock everywhere. Your vids are great and appreciate all the info!
@rajaa111
4 жыл бұрын
I haven’t ran the .25 but mostly all nova’s come with that plug, you can try running a 5 that will be ok
@elise308
4 жыл бұрын
@@rajaa111 appreciate the feedback my man!
Doesn't that big long tube affect your tune unless you're going to run with that tube
What's up brother, been watching alot of ya vids non stop ( new sub) been wanting to get into some novice racing here local at adrenaline in Virginia ( how I found you) but I really was looking at 4x4 e words but I just cant decide on if that losi 8t is a decent 8th scale kit for a new to nitro rookie to get into the game with? Would really appreciate a new to racing / getting Into racing video and drop some jewels for a borther!!
@rajaa111
4 жыл бұрын
No problem, I got you
been looking through your vids but didnt see one do you have a video for suggestions on where to start with 1/8 nitro buggies i dont really want to do rtr cause building it is part of the fun but that being said it might be the best choice because a kit build seems to add up pretty quick between engine receivers and so on. also any suggestion on a good entry e buggy would be cool.
@rajaa111
4 жыл бұрын
I will do a video, to help explain some things but it really comes down to budge if budge is not a issue then get a kit but the cost will be a lot more
@johnnaybor9367
4 жыл бұрын
rajaa111 I was thinking the kyosho mp9 rtr would be a good start point and a team energy t8x really just want tech for around the house and fun stuff. But a intro into the sport video would be awesome! Thanks for reply
@rajaa111 where’d you get the tubing on the exhaust from? Great video boss
@rajaa111
2 жыл бұрын
Home Depot, any tubing will work, just make sure it heat resistant
@robingram8
2 жыл бұрын
@@rajaa111 appreciate the quick response! I hope to run into you at some of the Tracks in Pa next season trying to get into the 1/8 buggy and truggy nitro racing
Thanks man! I can never get my nitro engines tuned right. But I am running junk rtr engines. I am thinking of buying the Novarossi Bonito 7 port for my MP9 roller I bought. What are your thoughts?
@rajaa111
4 жыл бұрын
Hey Brotha, that's a great choice, I was thinking about getting one my self, they are nasty little 7 ports that run very well. The bonito is novarossi longest running production engine, It's been around for years and they tune up pretty easy, great for racing or bashing. It will go nice in that MP9 roller.
@theRCelement
4 жыл бұрын
rajaa111 Thanks a ton bro! I will keep you updated on how it goes. Thanks for the tuning video👍
@rajaa111
4 жыл бұрын
The RC Element No problem brotha, if you need any help just let me know. Definitely keep me posted 👍🏾, also man you doing great work why no comments on you channel?
@theRCelement
4 жыл бұрын
rajaa111 Thanks bro! Yeah KZread shut down my comments on my entire channel a year ago when that whole minors in videos came about. I have a handful of videos that featured my daughters that ended up getting millions of views. I have over 300 hundred videos and my daughters are in like 15 maybe. I keep emailing them about it and they said they disabled comments on millions if channels featuring minors. I said well then just disable the few videos my daughters are in. But they won’t. Crazy man!
Appreciate your vids mate. Some great information on them. Can I ask a question ?... My engine won't prime, for some reason. Blocking the exhaust, while pulling starter, doesn't push any fuel. I have to blow into fuel hose, to push fuel through. Any idea's ?
@rajaa111
4 жыл бұрын
Check your exhaust gaskets, there might be a air leak, this will not let the pressure build up
@Chris_Lastname
4 жыл бұрын
@@rajaa111 thanks man. Now that you mention it, I have noticed a bit of fuel spray, on the pull starter casing, right below the exhaust join. I bet your right about the gasket. I'll get it changed. Thanks a lot man. Wisdom and knowledge
@Chris_Lastname
4 жыл бұрын
@@rajaa111 i found a fuel leak, coming from the backplate bushing, and pull-start shaft. theres play in the bearing and shaft. hopefully thats whats causing the issues
how do you like the m2c starter box setup. mine truck locks in good buggy not the greatest.
@rajaa111
4 жыл бұрын
I have the same problem, it’s the mud guard screws that get in the way of the buggy not fitting good
Bro when i was tunning one of my P5s it kept flaming out the mt hobby owner thats raced fir 20 years told me to run #3 hot..aftwr that smooth as butter..no more flame outs so all i run are hot plugs in my 21s
@rajaa111
4 жыл бұрын
See, I try to tell people those nova 6's are to cold for me, they don't let the engine run constantly and hard to keep the engine running smoothly, listen to your hobby shp owner he knows what hes talking about, I stop using those nova plugs a long time ago
Wangsters? Lmao. I appreciate your vids.
@rajaa111
4 жыл бұрын
Thanks brotha, It's always one or 2 out there...lol
How much adjusting from day to day use? And when you need to adjust maybe because of different humidity, do you only adjust the high speed needle?
@rajaa111
4 жыл бұрын
it really depends on temps, sometimes you don't have to adjust anything, mostly the high speed needle after the initial tune
@henriksrensen5958
4 жыл бұрын
@@rajaa111 great, thanks 👍
I need to send you me nova .28.8 I just cannot get it right either good bottom loads or good and idle up then back down
Yo i gat a rtr losi truck been having trouble with the break in process........i use the heat gun to get it to 200 degrees.......how many turns on the high end and low end should i start off with having trouble getting it started i hate this pull start
@rajaa111
4 жыл бұрын
It's hard to say, I don't know what your temps are there, start off with both needles flush from there keep leaning out the low speed needle until it starts, also did you adjust you idle? if so get the car started and then adjust the idle
@cordelldotson4327
4 жыл бұрын
@@rajaa111 i was messing around with the idle i think i flushed it with the high end needle.......once i get started its basically by ear when you meesing with the idle screw right
Show carro 🚗 nitro
Just put a band new novarossi clutch and bell clutch all nova. How do I know when it’s sleeping. It’s takes off good then it slows down alot
@rajaa111
4 жыл бұрын
does the clutch shoes snap back when the clutch is installed on the flywheel?
@anthonyjackson436
4 жыл бұрын
I’m take it all apart now. I will get back to you
what did you use to glue the fuel line holders on the tank???
@rajaa111
4 жыл бұрын
jason bucao just regular crazy glue or gorilla glue, just make sure you scuff both surfaces first and clean with alcohol then glue
@Bdj_jdk
4 жыл бұрын
@@rajaa111 thanks man!!
I think it’s my mid speed needle , fix 302 has a mid speed needle right
@rajaa111
4 жыл бұрын
Anthony jackson make that needle flush from there keep leaning it out a hour at a time, leaning is counter clock wise
@anthonyjackson436
4 жыл бұрын
Ok bc I moved that on accident thinking it was the idle. But the idle on the 302 is further inside the motor. Thank you bro you are helping people. We appreciate you!!
@rajaa111
4 жыл бұрын
Anthony jackson yeah make that mid needle flush, the idle screw is the small one behind the mid needle, it will be on your right side
@anthonyjackson436
4 жыл бұрын
I ended up turn it clock wise from flush. Maybe a whole turn . But it worked running good now. Motor starts running good when it’s at 205F kinda hot .Thx for the help
Hi. I really like your videos. Can you give me some advise plz. I have an Sworkz 350 evo 2 limited with a reds evoke r7.
@rajaa111
4 жыл бұрын
What do you need advice on?
@asdronephotography8854
4 жыл бұрын
Just saw your reply. Sorry for late reply. I have my rear bearings and crankshaft all rusty. Managed to get the crankshaft 80% good. Bearing is running freely and engine is running nice.easy to tune. Do you think i need to change? The problem is that i don't know get reds engine parts in my country and even online they don't ship
@asdronephotography8854
4 жыл бұрын
@@rajaa111 and i want to know if i can run a 17t clutch bell on a nitro buggy. Here in my country we don't have off road tracks
@asdronephotography8854
4 жыл бұрын
@@rajaa111 how can i send you some pics of my buggy so you can help me?