Here are some quick and easy steps to keep your wheels in alignment! Thank You For Watching!
Жүктеу.....
Пікірлер: 29
@TJCombo677 жыл бұрын
Best truing vid I've seen so far, explanations were perf.
@thatracinggtbmx6453 Жыл бұрын
Thank you dude ive been struggling badly with this but u and my bro explained it so damn well
@BMXNEWSCHANNEL
10 ай бұрын
Glad to help. Subscribe fore more coming soon!
@ljxn3 жыл бұрын
Best truing video I've found, and I've watched about 15-20. Finally someone who can perfectly articulate how to true a wheel. Thank you!
@BMXNEWSCHANNEL
3 жыл бұрын
Thank you for watching. Make sure to hit our subscribe button.
@02subiedoo5 жыл бұрын
Landed a 3 wrong today heard my spokes ping, wheel had a slight wobble after watching 4 videos I had made my wheel worse. I then came across yours and my wheel is perfect. THANK YOU explained so well. Subscribed!!!
@regisphilmn6 жыл бұрын
Homeboy thank you for a perfect video and being detailed by SHOWING your work. You won't believe how many instructional videos just breeze through instructional videos. Like we know already. Good job!!
@jawandavideos31992 жыл бұрын
Bro Ur the legend solved my biggest problem thanks
@xdKinkyGorilla3 жыл бұрын
Explanations are better than the other ones, really learned something from this. I will use this knowledge on my bmx
@ohmedarick16 жыл бұрын
Great Video Thank you.
@softracing5 жыл бұрын
Straight forward easy to understand,Great Job.In a few years I may be sending you wheels.*=,Ride-oN,=*
@coventrypizza3317 жыл бұрын
awesome video man, you got a new sub
@BMXNEWSCHANNEL
7 жыл бұрын
+Cole Boyko Score!!! Thanks Cole! Means a lot. 👍
@joshsmtbchannel5605 жыл бұрын
can you use a upside down zip tie since it wouldn't lock?
@dylanbradley62133 жыл бұрын
That’s cool way
@luisRodriguez-uj6cd8 жыл бұрын
How do you fix when it starts going up and down?
@BMXNEWSCHANNEL
8 жыл бұрын
When it's out of alignment that way it's harder to measure how far out of whack it is with out a truing stand because your rub point is under the tire, not on the sidewall....Find the center of rub under the tire, then tighten an even section on either side of the rub point gradually. You want to true that side but not twist the rim so you evenly tighten the same amount of spokes on either side of the rub point........ when I mean "rub point", I'm meaning the exact center of where the misalignment is.
@CertifiedRippers
4 жыл бұрын
Yeah im having this issue as well
@itznando46613 жыл бұрын
For my spokes I tight them clockwise any way I look at it and loose the spokes anti clockwise on any way I look at it
@Tonyplat984 жыл бұрын
a better method is to use zip-ties instead of the break pads. You can see better that way...
@BMXNEWSCHANNEL
4 жыл бұрын
Facts!
@AkaDroopy8 жыл бұрын
im gnna get a stranger ballast and need to lace it up so thx for tutorial. also what hub wad that.
@BMXNEWSCHANNEL
8 жыл бұрын
That's cool. Just remember to take your time and make sure you know if it's a cross laced or regular set up. That hub is an Animal Javeline V1 in Polmogranate color.
@awaitingthetrumpetcall45292 жыл бұрын
6 years after this video was produced, you may never see my comment. If you do...thank you for the education.
@BMXNEWSCHANNEL
Жыл бұрын
I created this channel to inform, educate communicate, and relate to everyone that matters... You are one of those individuals because you play a crucial role here. No matter how much of a regular person other channels make you feel like, we here @bmxnewschannel appreciate your view and support just as much as any other view... You are directly a part of the audience that makes BMX what it is today. MUCH LOVE FOR THE SUPPORT!
@Bskrv5 жыл бұрын
Can you tell me the name of the hub , please?
@BMXNEWSCHANNEL
5 жыл бұрын
That hub in the video is a stock premium hub from a complete bike.
@rgw1380rw
4 жыл бұрын
@@BMXNEWSCHANNEL It looks eerily similar to the stock hub that came with my Performer. Before I lace my rear Hazard Lite, the V2 Clutch will be replacing the unknown stock hub I currently have. If I can't get this truing method together, it's off to the pros to hand them my pocket lint😂! My patience level has always been short, so I don't want to get in my destructive mood while attempting to complete something that cost me a bit of cash to purchase, then customize a little.
@dominic54574 жыл бұрын
I have a question, If I want to put a new hub on a used wheel with a hub already in it do i just loosen all the spokes to get that hub off?
Пікірлер: 29
Best truing vid I've seen so far, explanations were perf.
Thank you dude ive been struggling badly with this but u and my bro explained it so damn well
@BMXNEWSCHANNEL
10 ай бұрын
Glad to help. Subscribe fore more coming soon!
Best truing video I've found, and I've watched about 15-20. Finally someone who can perfectly articulate how to true a wheel. Thank you!
@BMXNEWSCHANNEL
3 жыл бұрын
Thank you for watching. Make sure to hit our subscribe button.
Landed a 3 wrong today heard my spokes ping, wheel had a slight wobble after watching 4 videos I had made my wheel worse. I then came across yours and my wheel is perfect. THANK YOU explained so well. Subscribed!!!
Homeboy thank you for a perfect video and being detailed by SHOWING your work. You won't believe how many instructional videos just breeze through instructional videos. Like we know already. Good job!!
Bro Ur the legend solved my biggest problem thanks
Explanations are better than the other ones, really learned something from this. I will use this knowledge on my bmx
Great Video Thank you.
Straight forward easy to understand,Great Job.In a few years I may be sending you wheels.*=,Ride-oN,=*
awesome video man, you got a new sub
@BMXNEWSCHANNEL
7 жыл бұрын
+Cole Boyko Score!!! Thanks Cole! Means a lot. 👍
can you use a upside down zip tie since it wouldn't lock?
That’s cool way
How do you fix when it starts going up and down?
@BMXNEWSCHANNEL
8 жыл бұрын
When it's out of alignment that way it's harder to measure how far out of whack it is with out a truing stand because your rub point is under the tire, not on the sidewall....Find the center of rub under the tire, then tighten an even section on either side of the rub point gradually. You want to true that side but not twist the rim so you evenly tighten the same amount of spokes on either side of the rub point........ when I mean "rub point", I'm meaning the exact center of where the misalignment is.
@CertifiedRippers
4 жыл бұрын
Yeah im having this issue as well
For my spokes I tight them clockwise any way I look at it and loose the spokes anti clockwise on any way I look at it
a better method is to use zip-ties instead of the break pads. You can see better that way...
@BMXNEWSCHANNEL
4 жыл бұрын
Facts!
im gnna get a stranger ballast and need to lace it up so thx for tutorial. also what hub wad that.
@BMXNEWSCHANNEL
8 жыл бұрын
That's cool. Just remember to take your time and make sure you know if it's a cross laced or regular set up. That hub is an Animal Javeline V1 in Polmogranate color.
6 years after this video was produced, you may never see my comment. If you do...thank you for the education.
@BMXNEWSCHANNEL
Жыл бұрын
I created this channel to inform, educate communicate, and relate to everyone that matters... You are one of those individuals because you play a crucial role here. No matter how much of a regular person other channels make you feel like, we here @bmxnewschannel appreciate your view and support just as much as any other view... You are directly a part of the audience that makes BMX what it is today. MUCH LOVE FOR THE SUPPORT!
Can you tell me the name of the hub , please?
@BMXNEWSCHANNEL
5 жыл бұрын
That hub in the video is a stock premium hub from a complete bike.
@rgw1380rw
4 жыл бұрын
@@BMXNEWSCHANNEL It looks eerily similar to the stock hub that came with my Performer. Before I lace my rear Hazard Lite, the V2 Clutch will be replacing the unknown stock hub I currently have. If I can't get this truing method together, it's off to the pros to hand them my pocket lint😂! My patience level has always been short, so I don't want to get in my destructive mood while attempting to complete something that cost me a bit of cash to purchase, then customize a little.
I have a question, If I want to put a new hub on a used wheel with a hub already in it do i just loosen all the spokes to get that hub off?